Used Saw Contactor for sale (22)

Condition: new, Year of construction: 2024, ZENZ ECOLINE – not operational in 2024 7m cutting length 100x130 cm throat capacity 95cm cutting width 22 kW electric motor 6000x100x1.1mm blade 850mm saw blade roller diameter Dcsdpfxe Ahgyte Ak Ajp Joystick for feed and lift with electronic position control Debarker Water lubrication 4 side supports 1 manual side support 3 log lifters 2 log turners 1 log holding arm 3 level compensation systems with clamps 1 log roller Mobile system with 4 wheels and brakes, German homologation 3.5 t

Condition: new, Year of construction: 2026, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: Dcjdpow D T Dkofx Ak Ajp T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2001, functionality: limited functionality, overall weight: 250 kg, Eisele VMS350-PV: The safety switch for the protective cover on the machine is defective; the rest of the machine functions perfectly. Coolant is supplied via a pump for additional minimum-quantity lubrication. Additionally, there are 3 roller conveyors. For sale due to business closure. No guarantee. Dsdpfx As Ahhkrok Ascp Excluding liability for material defects.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 03 267989, spindle motor power: 5,100 W, Equipment: saw blade guard, Radial cutoff saw designed for precise cutting of wood, composite materials, and materials with similar properties. The saw's main advantages are its high cutting accuracy, the ability to swivel the guide arm to both sides, and the tilting of the saw head. The smooth operation of the cutting unit is ensured by eight bearings, which are guided at an angle of 45° along steel guides. Max. blade diameter: 400 - 450 mm Cutting height: 125 - 150 mm Dodpfozu Rv Ajx Ak Aocp Arm length: 1100 mm Motor power: 5.14 kW Cast iron arm, swiveling +/- 60° Tilting saw head +/- 45° Rotating head +/- 90° CE safety standard Weight: 375 kg Year of manufacture: 1999

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, operating hours: 3,625 h, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 13,600 x 2,450 x 2,450 mm Weight: 7,200 kg Transport packages: 8 pcs. Operating hours: 3,625 h Djdpez Ni S Defx Ak Aocp

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, rotational speed (max.): 4,750 rpm, Equipment: CE marking, documentation/manual, saw blade guard, STRIEBIG STANDARD III – vertical panel saw For sale: a STRIEBIG STANDARD III vertical panel saw. This machine comes from the renowned Swiss manufacturer STRIEBIG, a leader in the production of vertical panel saws. It is ideally suited for cutting furniture panels, MDF, HDF, plywood, chipboard, laminated boards, and plastics. The saw is fully functional and ready for use. It is currently in use at our company and can be inspected while in operation. Technical data: Manufacturer: STRIEBIG AG (Switzerland) Model: STANDARD III Power supply: 400 V Frequency: 50 Hz Saw blade diameter: Recommended: 300 mm Minimum: 290 mm Saw blade speed: 4750 rpm Vertically moving cutting carriage Mechanical pre-cutting device Original chip extraction system Robust steel construction Precision guides Panel stops Clear control panel Dcedszizy Iepfx Ak Aep Safety switch Working area Based on the photos: Cutting length approx. 5300 mm Cutting height approx. 2200 mm (Please provide exact dimensions if required). Technical condition 100% operational Ready for use without any additional work Regularly serviced Can be tested during operation Very precise and stable Application Ideal for cutting: Furniture panels MDF Plywood OSB boards Laminated boards Plastics

Condition: excellent (used), SCM 320cm Linvincibile Si3 panel saw 320cm carriage, 0-45 degree tilting saw head, motorized tilting and up/down adjustment of the saw blade, right-hand fence with motorized adjustment up to 1500mm, 1.3KW scoring saw, 2-axis, electrically adjustable, Dcjdpj Ahm R Tjfx Ak Asp 9KW motor, 3 speeds, max. saw blade diameter 450mm, Fence with electronic displays. Used machine, very good condition.

Year of construction: 2026, condition: new, functionality: fully functional, Double head sawing machine with 5 controlled axes for compound angles FOM INDUSTRIE KEOPE E5 6,6m Year: 2026 Condition: new (showroom machine) Dsdpfxoztr Rre Ak Aocp Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Dodpfx As Ahfcxek Aecp Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . .

Condition: excellent (used), Year of construction: 2010, Used machine in top condition – training machine – Year of manufacture: 2010 Digital display in Y Equipment and technical data Cutting length: 3300 mm Cutting height: 2200 mm (edge trimming height 2110 mm) Cutting depth: max. 60 mm Extraction: - Saw unit 120 mm Dcsdpfxjzzfr Es Ak Aep - Lath grid 100 mm Workpiece support: - Sturdy plastic support for optimal stability, even for narrow workpieces. Tilting roller transport system: Manual for easy and material-friendly transport Locking: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: Diameter: 250 mm Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding guide rail: incl. workpiece support for narrow parts with strip stop Dust extraction system in accordance with BG guidelines TRK (below 2 mg of fine dust / m³ of air) Availability: immediate Location: 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1999, STRIEBIG III TRK scoring unit In wooden box Can be retrofitted to a Striebig Standard TRK Location: from stock 54634 Bitburg - available immediately - Dcjdsvluwvepfx Ak Aep

Condition: used, Year of construction: 1974, Roller diameter: 600 mm, with drive mechanism, belt guide at the top and bottom, tilting table, new motor with parallel stop. Motor power: 2.2 kW. Location: Nattheim. Dsdpjy R Tqkjfx Ak Ajcp

Condition: excellent (used), CATALOG NUMBER 7541 Technical specifications: - max. diameter of the main blade (without scoring blade) 400mm - max. diameter of the main blade (with scoring blade) 350mm - blade bore diameter 30mm - max. cutting height for a 400mm blade - 90 degrees - 120mm, 45 degrees – 85mm - max. cutting height for a 350mm blade - 90 degrees – 95mm, 45 degrees – 67mm - main blade adjustable up/down and at an angle - blade guard Dsdpoztavvjfx Ak Ascp - with side carriage - cutting length on the carriage 1700mm - cutting width on the carriage 1400mm - cutting width with the guide 1350mm - main motor 6kW - table dimensions 1190x990mm - with extension 1880mm - with lengthening 1890mm - with scoring blade - max. diameter of the scoring blade 120mm - diameter of the scoring blade spindle 20mm - scoring blade motor 0.75kW - 3 types of rotational speeds 3500, 4500, 6000 rpm - brake - diameter of the dust extraction nozzle 80, 120mm - dimensions (length/width/height) 3050x2200x1600mm - weight 800kg ADVANTAGES – Made in Poland – DTR documentation – Blade guard – With scoring blade – With extension and widening – Used saw, very good condition Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), functionality: fully functional, maximum cutting width: 360 mm maximum cutting height: 135 mm motor power: 8.5 kW maximum blade diameter: 500 mm minimum blade diameter: 490 mm blade speed: 2800 rpm CE marking 400 V safety clutch feeder length: 660 cm receiver length: 530 cm machine length: 90 cm year of manufacture: 2011 Djdpfx Aez E H Hcjk Aecp

Condition: excellent (used), Catalog number: 8094 TECHNICAL DATA - Track width: 300mm - Shaft width: 300mm - Max cutting height: 120mm - Max blade diameter: 350mm - Blade bore diameter: 70mm Dcedpfx Akezx U Iqj Ajp - Top: - 2 rows of pawls/ejectors - Smooth, sliding pressure shaft - Pawls/ejectors - Pressure pad - Shaft with saws - Pressure pad - Smooth, sliding pressure shaft - Bottom: - Guide rail - Pawls/ejectors - Track - 1 feed speed + variable - Main motor power: 22kW - Feed motor: 2kW - Central lubrication - Laser - Diameter of extraction nozzle: 250mm - Table dimensions (length/width): 2000x710mm - Dimensions (length/width/height): 2600x1500x1600mm – weight: 1340kg ADVANTAGES - Made in Italy - With laser - Multi-blade saw, used, in perfect condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalog number: 7885 TECHNICAL DATA - Max. main blade diameter: 400mm - Max. cutting height: 120mm - Main blade adjustable up/down and at an angle - Large blade guard - Spindle diameter: 30mm - Cutting length on the carriage: 1400mm - Cutting width with guide: 1300mm - With a sliding carriage - Guide on the sliding carriage adjustable at an angle - Main blade motor power: 4kW - 2 types of rotational speeds: 3000/4500 rpm - Table dimensions: 1120x1020mm - Table dimensions with extension: 1630x1730mm - Diameter of the dust extraction port: 80mm, 140mm - Dimensions (L/W/H): 3300x2180x1450mm – weight: 1040kg ADVANTAGES – Made in Poland – DTR documentation available – Used saw - Very good condition Net price: 9900 PLN Net price: 2302 EUR, depending on the exchange rate of 4.30 EUR Dcedpoztavisfx Ak Asp (Prices may vary due to significant fluctuations)

Condition: used, Technical specifications: Dcsdpfx Aj Ahyxmek Ajp Max. saw blade diameter: 300 mm Min. saw blade diameter: 250 mm Saw blade arbor diameter: 30 mm Scoring saw diameter: 100 mm Manual height adjustment of the saw blade Tilting saw blade, adjustable from 0° to 45° Manual adjustment of the saw blade tilt angle Table length: 1600 mm Table locking mechanism Dust extraction port diameter: 120 mm Guide Safety guard Safety switch Power supply: 400 V Main motor power: 4 kW Overall dimensions: Length: 1600 mm Width: 2900 mm Height: 1100 mm

Year of construction: 1999, condition: good (used), EWD NKU 300 – Double-arbor resawing circular saw with control cabinet For sale is a used EWD NKU 300 with a control cabinet. This robust double-arbor resawing circular saw is designed for resawing lumber and squared timber. Version with a fixed infeed. Technical data: * Manufacturer: Esterer WD GmbH (EWD) * Type: NKU 300 * Type/Position: 10.1 * Identification No.: 816481 Djdpfx Akj Ahzpgj Aocp * Year of manufacture according to nameplate: 1999 * Cutting height: up to approx. 305 mm * Saw arbor drives: 2 × 110 kW * Saw arbor speed: 2,400 min⁻¹ * Max. saw blade diameter (top): 620 mm * Max. saw blade diameter (bottom): 560 mm * Feed rate: model series specification up to 80 m/min * Includes control cabinet Further information regarding condition, equipment, and viewing can be provided upon request.

Condition: excellent (used), Model: Standard 2 Plus 6220A Dcsdpfe Ah Erusx Ak Aop

Condition: used, Year of construction: 2021, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, saw blade guard, scorer, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, cross, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of the saw unit: 0°–46° - Cutting width: depending on the model, approx. 1000 / 1250 / 1600 mm - Cutting length: depending on the model, approx. 2200–3700 mm - Speeds: 3000 / 4000 / 5000 rpm, optionally infinitely variable 2000–6000 rpm Dcedozuywiepfx Ak Asp - Motor power: approx. 10 KW - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and precise furniture / interior design work - Core machine for professional woodworking shops, carpentry workshops, training workshops, and makerspaces No warranty.

Condition: used, Technical specifications: Saw blade diameter: 300/350/400 mm Scoring saw diameter: 120 mm Manual saw blade height adjustment Tilting saw blade, adjustable from 0° to 45° Manual saw blade tilt angle adjustment 3 speeds: 3000/4000/5000 rpm Table length: 1700 mm Table locking mechanism Safety switch Power supply: 380 V Motor power: 3 kW Overall dimensions: Djdpfxj Ahyq Us Ak Aocp Length: 2100 mm Width: 2100 mm Height: 1000 mm

Condition: excellent (used), CATALOGUE NUMBER 7751 TECHNICAL DATA - track width 250mm - working width of the roller 250mm - max. disc diameter 300mm - disc bore diameter 60mm - max. cutting height 100mm - table width with extension 520mm - table length 1580mm *from above: - pawls, 2 rows - sliding roller, metal, pressure roller - roller with saw blades Djdjzr Izkspfx Ak Ajcp - smooth sliding roller, metal, sliding roller *from below: - sliding roller - guide strip - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor 0.75kW - main motor 15kW - diameter of dust extraction nozzle 200mm - overall dimensions L/W/H 1640x1400x1550mm - weight 1000kg ADVANTAGES – Italian made – very good condition – used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7545 TECHNICAL DATA track width: 250mm roller width: 220mm max. disc diameter: 300mm disc bore diameter: 60mm cutting height: 100mm table width: 650mm table length: 1460mm – top: 2 rows of pawls smooth, sliding roller roller with saws smooth, sliding roller – bottom: guide pawls track 2 feed speed settings + stepless adjustment central lubrication feed motor: 1.2kW main motor: 21kW dust extraction port diameter: 180mm Djdpeztad Tsfx Ak Ascp overall dimensions (L/W/H): 1700x1450x1500mm weight: approx. 1800kg – made in Italy – DTR documentation available – robust machine – used multi-blade saw, very good condition Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: good (used), Year of construction: 1998, Panel saw with a maximum cutting length of 8 m. Maximum cutting width: 120 cm. Saw motor: 15 kW. Maximum cutting height: 140 mm. Overall length: approximately 9.5 m. Overall width: approximately 1.8 m. Dcjdpfxj Agw Tgs Ak Aop

Condition: reconditioned (used), Year of construction: 1991, A Kaltenbach cold-cut saw is for sale. The machine has been completely disassembled and reassembled. During the overhaul, the gearbox, motor, and hydraulics were refurbished. The table was resurfaced and fitted with new bearings. The gearbox is free of play! Type: KKS 400 E Year of manufacture: 1991 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse in/out: 1,550 mm/min Maximum workpiece size: 130 mm Workpiece size for square material: 120 mm Workpiece size for flat material: 305 x 20 mm Workpiece size for round material: 130 mm Minimum workpiece size: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch. Dcodpe Ahz Dxefx Ak Asp Shipping possible upon request. Forklift available for loading.