Chop saw

Stromab TR 500 MATRIX

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Iodpfxohw Ng Ie Ap Dsbc Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm Isdpsxfvp Aefx Ap Dobc The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,234 h, functionality: fully functional, feed length X-axis: 7,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 250 mm, feed rate X-axis: 80 m/min, total length: 8,000 mm, total height: 1,800 mm, overall weight: 2,000 kg, saw blade diameter: 500 mm, disc diameter: 500 mm, table length: 7,000 mm, Equipment: USB port, For sale: STROMAB MATRIX TR 500 optimizing saw in very good technical condition, used in a small production facility, primarily for cutting structural timber. Utilized for timber frame house prefabrication. The machine is fully operational and has been regularly serviced. Ready for immediate operation without further investment. Isdpfx Ajwp Rvhep Dsbc Sold with a VAT invoice. ON-SITE TESTING AVAILABLE PRICE negotiable.

Condition: new, Year of construction: 2025, machine/vehicle number: MR006589, High-quality, high-speed crosscut saw with automatic feed system and optimization software. This machine is equipped with a feature to detect faults in the material using chalk markings and comes with the following options: - Pneumatic feed cylinder right of the saw - Pneumatic feed cylinder left of the saw - 'OPTI' package with material length detection and additional optimization criteria - 'OPTI PLUS' package with photocell recognition of material defects - Machine with outfeed table (per meter) - Label printer - MO9416XLTD Technical specifications: - Mitre angle: 90° - Maximum cutting length: 360 mm - Maximum cutting height: 135 mm - Maximum feed length: 6000 mm - Saw list import: Yes - Chalk mark sensor: Yes - Maximum saw blade diameter: 500 mm - Motor power: 10 hp - Serial number: 10561 Ibsdpfoy I N Aksx Ap Doc

Condition: used, Year of construction: 1990, with Tersa cutter shaft Machine in working order completely set up used good condition cleaned functionality tested partially refurbished Manufacturer: Martin Type: T43 Year of manufacture: 1990 Ibedezg Nl Tepfx Ap Doc Machine no.: V 177666 GS-tested GS-tested for wood dust Segmented pressure beam Rubber feed roller Rubber extraction roller Feed rate m/min: 6 9 12 18 m/min Number of cutters: 4 automatic motor brake Tersa reversible cutters Digital display for planing height electric height adjustment with tip fine adjustment Motor kW: 5.5 Planing width approx. mm: 630 Planing height approx. mm: 250 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 1200x1250x1200 mm Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition as inspected, without warranty

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1000 kg Ibsdpsv A Htdsfx Ap Doc Total power requirement 8,5 kw

Condition: used, Year of construction: 2004, functionality: fully functional, Minimax Formula SP1 Thickness Planer Working width: 520 mm Working height: 250 mm Electric feed table lifting and lowering 4-knife cutterblock Conventional knives Rollers in the feed table Ijdpozlqfxjfx Ap Djbc 4 feed speeds: 5/8/12/18 m/min Main motor power: 5.5 kW Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine with granite structure and 16 spindles equipped with marble polishing plates Passage width: 2,200 mm Automatic centralized lubrication system Optical slab shape detection system with 1 × 1 cm resolution Ibjdpfx Apoz D S Ivj Djc Cleaning spindle Working direction: from right to left On request, the machine can be supplied as a complete line, including loading system, roller conveyors, dryers, waxing machine, film applicator and unloading system.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,200 mm, overall weight: 600 kg, total width: 1,100 mm, total height: 1,400 mm, warranty duration: 12 months, Equipment: saw blade guard, Saw blade diameter: 350-800 mm Saw blade arbor: 30 mm Working height: 900 mm Cutting heights: see brochure Cutting widths: see brochure Iedpfjz A Th Uox Ap Debc