Used Saw Machine for sale (66,258)

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 Bodsx H Uctepfx Aaijwr engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Bwodpfevrvq Dex Aaior Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: as good as new (ex-display), Demonstration Machine Bjdpfxevrvqwe Aaijwr The professional block bandsaw for logs up to 100 cm in diameter from Forestor Pilous is the result of decades of sawmill tradition, specifically designed for professional sawyers. Equipped with a telescopic lever log turner, log lifter, and a powered log lifter for horizontal log feed. Features 5 hydraulic angle stops and 2 log clamping devices. The saw is standard for logs up to 7.6 m long and can be extended on request. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height settings, with two speeds for height adjustment. Includes stationary operator panel. Automatic rapid return. CE certified. Technical Data: Max. log diameter: 1000 mm Max. board width (plank width): 850 mm Max. saw blade rise: 875 mm Min. cutting height: 30 mm Max. frame clearance: 450 mm Cutting length of base section: 7.6 m Extension section length: 3 m Saw blade drive: 15 kW Portal travel motor: 1.5 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5350 x 35 ÷ 40 x 0.9 ÷ 1.1 mm Weight of base version: 2580 kg Extras not included in the price. (Image for reference only)

Condition: new, Aluminum format sliding carriage with hardened steel guide rods. Parallel stop with micrometric fine adjustment. Milling spindle and saw blade can be pivoted and completely retracted. 100% Made in EU (developed, built, quality-tested) Technical data Circular saw: Max saw blade diameter 315 mm Bwodpevrvdkofx Aaisr Spindle diameter 30 mm Format table length 2300 mm Max. cutting width at the parallel stop 1100 mm Max. cutting height, 90°/45° 103 mm/72 mm Motor output 3.8 kW S6 (3 kW S1) Suction nozzle diameter 120 mm Mill: Spindle diameter 30 mm Pivoting spindle 90°/45° Height adjustment of the spindle 175 mm Spindle speed 10000/8000/6000/ 5000/4000/3000 Motor output 3.8 kW S6 (3 kW S1) Weight 790 kg Optional accessories: Longer Format sliding table Motor output 5 Kw (4 Kw S1) Integral stop on the milling stop Miter grid on the laying table Scoring cutter, interchangeable spindle for router

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Total power: 5.5 kW Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Max. cutting length: 5000 mm Bwsdpfex R U Epjx Aaijr Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Two saw heads that can operate independently or synchronously Automatic positioning of the moving saw head via servo drive Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Infinitely adjustable saw feed Very stable and heavy machine base

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Bwjdpfxjypbx Eo Aaijr Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: new, Year of construction: 2020, machine/vehicle number: MR006644, This SVP950 is a powerful vertical panel saw. The machine is equipped with, among other features, variable speed control on the saw unit. This SVP950 is a robust vertical panel saw machine. It features variable speed control on the saw unit and is equipped with digital readouts for both horizontal and vertical cutting. The SVP950 offers a cutting depth of 80 mm and is powered by a strong 7.5 HP motor, making it suitable for processing thicker materials. It is also suitable for plastics, where a lower speed is desired. This is an ex-showroom machine directly from the manufacturer, allowing us to offer it at a competitive price with a full new-machine warranty. The machine is equipped with the following options: - Rear support wall for small workpieces - Variable speed: 2,000 – 6,000 rpm - Electronic display for horizontal measurement indication Bsdpox S U I Hsfx Aaiowr - Electronic display for vertical measurement indication - ECO extraction system: channeled extraction during vertical cutting Technical specifications: - Maximum cutting length: 5300 mm - Maximum cutting height (horizontal): 2100 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 80 mm - Maximum saw blade diameter: 300 mm - Motor power: 7.5 HP - Serial number: 20950017

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, cutting range round steel at 45°: 450 mm, cutting range round steel at 90°: 450 mm, cutting range square steel at 45°: 420 mm, cutting range square steel at 90°: 450 mm, saw band length: 5,780 mm, saw band width: 41 mm, Semi-automatic sawing machine with 1-sided miter. (Also available with 2-sided miter.) Hydraulically operated material clamp. Hydraulically operated saw frame. Brand: KMS Type: KMY DG 450 Saw motor: 3 kW Height of support table: 888 mm Max / Min clamp opening: 0 / 740 mm Clamp height: 240 mm Mitre: 1 side Down speed: Continuously adjustable Cutting speed: Continuously adjustable, 20 - 90 m/min Band dimensions: 5780 x 41 x 1.3 mm Weight: ± 1600 kg Capacity: 90° (right angle): Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 680 mm 60°: Round: Ø 450 mm Bwodpfx Aajvy Swioier Square: 450 x 450 mm Rectangle: 450 x 570 mm 45°: Round: Ø 450 mm Square: 420 x 420 mm Rectangle: 350 x 480 mm 30°: Round: Ø 350 mm Square: 330 x 330 mm Rectangle: 240 x 450 mm Incl. 2 short roller tracks. (not shown)

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Bwodpswrfmajfx Aaijr Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Increase your productivity with this complete automatic drill-saw street for profiles. Designed to work efficiently and accurately with different profile steel materials. Bwjdjtnf Iyopfx Aaier Price does not include disassembly, assembly, transportation and import duties. Please contact us for more information about this machine.

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm Bsdpfx Aasyz Tqroiewr - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, total height: 34 mm, total length: 2,350 mm, total width: 1,250 mm, overall weight: 1,250 kg, table height: 600 mm, coolant pump power: 60 W, cutting range round steel at 90°: 400 mm, cutting range square steel at 90°: 400 mm, saw band length: 4,650 mm, saw band width: 1 mm, ROGI SAWING MACHINE TYPE WDS-400 SEMI-AUTOMATIC Saw blade size ----- 4650 x 34 x 1.1 mm Sawing speeds ----- 19/30/50/65/90 m/min. Motor power ----- 4 kW - 400V - 3 phase Weight ----- 1250 kg Cutting capacity ----- 400 mm / 500W x 400H mm INCLUDES Bimetal band saw blade Workpiece stop Saw blade guide with carbide inserts Hydraulic clamp Coolant pump Hydraulic downfeed cylinder Motor protection switch Automatic end stop Bwjdpfxjx N Iawo Aaior

Condition: new, Motor power: 1.5 kW (400V-3PH) / 1.5 kW (Inverter) Cutting capacity 0°: Ø 255 mm ■ 200 mm █ H200 x 340 mm Cutting capacity 45°: Ø 220 mm ■ 200 mm █ H200 x 220 mm Cutting capacity 60°: Ø 135 mm ■ 135 mm █ 135 x 135 mm Cutting capacity -45°: Ø 220 mm ■ 200 mm █ H200 x 135 mm Blade speed: 35/70 m/min / 20~80 m/min (Inverter) Blade dimensions: 2750 x 27 x 0.9 mm Weight: 390 kg Dimensions: 1750 x 770 x 1600 mm Bwsdpex Rkpksfx Aaisr

Condition: not inspected (used), I sell the saw blade and saw band sharpening machine Stankoimport TCPA-6, Made in Russia. Bwjdpjd Hx R Defx Aaijr

Year of construction: 1980, condition: excellent (used), I sell the saw blade and saw leaf sharpening machine Loroch G77, Made in Germany. Bsdpfx Asim Ea Djaiewr

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST D2 002, saw blade diameter: 250 mm, overall weight: 2,850 kg, cutting width (max.): 450 mm, Two-spindle multi-saw wood cutting machine JL32 Good working condition Max. 10 circular saw blades on the spindle, diameter 250mm x 70mm Main spindle dimensions: diameter 70mm, length 420mm Bwedey E Snqepfx Aaier Feed rate (cutting): 5-25 m/min Machine dimensions: length 2200mm, width 1500mm, height 1900mm Machine weight: 2850kg Voltage: 380V Main motor power: 30kW and 22kW (2950 min-1) Feed motor power: 0.75kW and 0.75kW (900 min-1)

Condition: used, machine/vehicle number: G-KF131799aH, Format circular saw milling machine Hammer B3 Winner, year of manufacture 2023, as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kg Prices subject to change, errors, printing and typesetting errors reserved Bwodpfxovw Ectj Aaisr

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Equipment: scorer, Lazzari Juno 3200 Sliding Table Saw Manufacturer: Lazzari Italy S/N 0101072 Year of manufacture: 2001 Carriage length: 3200 mm Cutting width at the crosscut stop: 1350 mm Cutting width at the crosscut stop: 3200 mm Bwedpfjv Nzx Iex Aaisr Cutting depth: 125 mm Scoring groove Saw blade height adjustment with handwheel Saw blade tilt adjustment with handwheel Saw blade angle indicator with scale Saw blade diameter: 400 mm Speeds: 3200/4000/5000 rpm Motor power: 5.5 kW Motor brake Exhaust connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 620 kg

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 74-4-10, functionality: fully functional, Panel saw ALTENDORF F90, manufactured in 1974 Machine no.: 74-4-10 Manufacturer: Altendorf, Germany Bodpfx Aaeipvrbeiowr Saw blade length: 2600 mm Cutting width: 1,300 mm Maximum cutting height: 130 mm Maximum saw blade diameter: 400 mm Main motor: 5.5 kW With scoring saw 4 speed settings Saw blade height adjustment: manual Weight approx.: 780 kg Technical data subject to change.

Condition: good (used), Year of construction: 1990, functionality: fully functional, Circular saw Altendorf F 45 Year of construction 1990 Manufacture: Altendorf Germany carriage length: 3200 mm Manual height and angle adjustment rip fence 1250 Scoring unit 0.75 kW Motor power: 5, 5kW 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 with scorer 350mm Upper intake guard Altendorf Automatic motor brake Weight approx. 1200 kg Technical data subject to change Bodper Eq Spjfx Aaiswr

Condition: new, The TITAN 43/20 CD+E firewood processor with joystick control cuts logs with a maximum diameter of ø 43 cm using a harvester bar and splits them with a splitting force of 20 tons. This is a combination machine (electric and PTO connection). Demonstration and inspection by appointment possible – the machine is currently in stock and available immediately. Warehouse clearance – special price – interim sale reserved. Bwedpfetrmg Hjx Aaier

Condition: used, Circular saw-milling machine Bernardo FK2, good condition, 2.2 kW, 450 kg Bwjdpox H Uigefx Aaijr Price changes reserved; errors, misprints and typographical mistakes excepted.

Year of construction: 2023, condition: new, machine/vehicle number: 23-04-35-001, F 25 Version 3 Manual height and swivel adjustment of the saw blade from 0 to 46°, with digital display. Bodpfx Aaof A Ehtoiowr Motor 5.5 kW, 2 speeds, 3,600 / 4,200 rpm. Double roller carriage, 3200 mm, Parallel fence including fine adjustment and DIGIT X (digital display of the cutting width) Cutting width 1000 mm, Angle miter fence, cutting length up to 3450 mm, Basic scoring unit with LED light Saw blade diameter max. 315 mm, saw blade projection max. 104 mm, Cutting height max. 100 mm, at 45° max. 70 mm, Large dust extraction hood (PSV), including optional front support roller, available immediately from stock in Seevetal, subject to prior sale excluding transport, assembly, and instruction.

Condition: new, Year of construction: 2025, machine/vehicle number: 6972, cutting height (max.): 155 mm, cutting width (max.): 1,100 mm, saw blade diameter: 450 mm, cutting length (max.): 3,350 mm, cutting width at rip fence: 1,100 mm, Equipment: scorer, Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at rip fence: 1,100 mm Maximum cutting height with 450 mm saw blade: at 90°: 155 mm, at 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP Extraction ports D = 120 + 80 mm Mitre fence extendable to 3,600 mm Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable rip fence adjustment Motors: Main saw: 5.5 kW / 7.5 HP, Scoring unit with motor: 0.55 kW / 0.75 HP Sliding carriage made of anodized aluminium, including high-precision linear guide made of hardened and ground steel Sliding carriage lockable in any position Saw blade guard with swing-away device Outrigger arm with adjustable mitre fence and length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment accessible from above (opening in the saw table) Bwodpfx Aewz Nbasaier Display for set saw blade speed Electrical system and safety devices in accordance with CE standards As inspected, ex location Seevetal, without pre-freight, freight, or commissioning. Subject to prior sale.

Year of construction: 1987, condition: not inspected (used), Sharpening machine for metal and segmented circular saws. Circular saw blade diameter from 80 - 710 mm. Tooth pitch adjustable. Tooth height 1.2 - 14 mm. Working speed steplessly adjustable, 15 - 180 teeth/min. Wet grinding system, NC controlled. Bedpfxolmkpfs Aaiewr