Used Saw Shaft Construction for sale (37,538)

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Crodpfx Ahswuz Iro Uji Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Crsdoc Snvfjpfx Ah Usi Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg

Year of construction: 2015, condition: used, Serial number: TMG15URExxxx Please contact ATS Norway for more information Codpfexu A Htox Ah Uori Please provide reference number upon request: 21725 Specifications: 2015 model Engine hours: Approx. 5,850 Weight: 38,000 kg Dafo fire suppression system 2 booms Laser Both drill hammers and spare hammer overhauled in 2024 LED lights Radio/CD Climate control/AC Service performed as needed Rear camera not functioning Ready for delivery Boom 1: Impact hours: Approx. 575 Electric motor hours: Approx. 11,100 Total drilled length: Approx. 603,000 meters Compressor hours: Approx. 2,900 Boom 2: Impact hours: Approx. 510 Electric motor hours: Approx. 7,200 Total drilled length: Approx. 387,000 meters Compressor hours: Approx. 2,900 Own weight: 38000 Model: 2015 Atlas Copco Boomer MC2 Tunnelborerigg.

Condition: refurbished (used), Year of construction: 1998, Lightly used bandsaw from IMET Crodpfx Aoxvcg Nsh Uji Model: BS 350 SHI E Capacity: 310 x 350 mm Double mitre Year of manufacture: 1998 (operated by one person) Including conveyor Semi-automatic (hydraulic)

Condition: used, Year of construction: 2006, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm table height 750 mm 550 mm 335 mm Crjdpfxexvduue Ah Uoi 550 x 335 mm 330 mm cutting speed 320 x 335 mm down speed 200 mm dimensions of saw-band 200 x 335 mm workpiece weight 15 - 150 m/min 3,0 kW work height max. 1500 kg connected load 2400 x 2200 x 1900 mm Standard equipment of the MEBAeco 335 GA- MEBA mitre system: Large, swiveling table prevents sawing into the material support surface - low wear costs! The material is always clamped at right angles close to the saw blade. - Minimum speed and saw blade monitoring on the band disc - NC control - Stepless height adjustment via height switch bar - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m

Year of construction: 2000, condition: good (used), Brand: SICA Credpfx Aoxu I Szsh Usi Type of machine: Planetary saw Model: TRC/S/SY/U 63-400 Year of manufacture: 2000

Condition: used, machine/vehicle number: 008089, Max. panel width: 1900 mm Max. panel length: 5300 mm Scoring Saw: 250 mm Crsdpjw Idb Tofx Ah Uji

Condition: used, Year of construction: 1988, saw blade diameter 0400 mm cutting diameter 140 mm cutting length 140 mm mitre joint cuts -/+ degrees +/-45° cutting capacity - square 130 x 130 mm cutting speed 5 - 30 m/min Crodpfx Asxu Nrioh Usi type of control konvent. voltage 380 V connected load 6 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,5 x 1,5 x 1,5 m Machine has angle cutting arrangement +/- 45°, is semi automatic without material infeed.

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21737 Csdpfxsxu A Hgs Ah Ujri Description:A total of 3 conveyor belts are sold together.One is in working condition, while two are sold as repair objects.Lengths: approx. 10, 12 and 14 meters.Quick delivery available. Own weight: 11 Model: 3 stk

Condition: good (used), Year of construction: 2002, cutting diameter 320 mm saw band length 4160 mm cutting width 610 mm cutting lenght max. 500 mm clamping head: max. 620 mm saw speed stufenlos 15-120 m/min work height max. 760 mm dimensions of saw-band 4160 x 34 x 1,1 mm Control Siemens Siematic OP3 total power requirement 2,6 kW weight of the machine ca. 1,96 t dimensions of the machine ca. 2,55 x 2,45 x 1,5 m Well-maintained fully automatic miter band saw with Siemens Siematic OP3 control for quantity and cutting length, hydraulic frame clamp, stepless saw band speed. Machine only used in individual production with small pieces for about 3 hours per week! Estimated operating hours = 3400. Cutting range 0° / 90° - round 320 mm - FLAT 610 x 320 mm !!!! Cutting range 75° - round 320 mm Cjdpfxjv Htimj Ah Usri - flat 350 x 200 mm Cutting range 60° - round 300 mm - flat 300 x 200 mm Cutting range 45° - round 260 mm - flat 250 x 180 mm Cutting range 30° - round 160 mm - flat 150 x 150 mm Please notice: Price of this machine new: €28000 Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2005, Round cutting area: 260 mm Crodpfx Ahsu R I A He Uoi Square cutting area: 260 x 260 mm Smallest diameter to be sawn: Ø 10 mm Smallest cutting length: 5 mm Minimum remaining piece length, single cut: 10 mm Minimum remaining piece length, automatic operation: 110 mm Single automatic material feed max.: 680 mm Multiple material feed: 9,999.9 mm Belt speed: continuously adjustable 15 -125 m/min Cutting feed: continuously adjustable Material feed: ball screw Automatic feed: with feed vice (Sp II) Material clamping: hydraulic, continuously adjustable. Clamping force: Machine vice (Sp 1) approx. 150 - 800 daN Feed vice (Sp II) approx. 150 - 800 daN Saw blade dimensions Standard: 4115x41x1.3mm Saw blade guide: hard metal, replaceable Saw blade tension: hydraulic Saw blade cleaning: using easily replaceable wire brush. Driven by flex shaft in proportion to the main drive. Coolant: supply via coolant nozzle Volume of coolant tank approx. 110 l Pump output approx. 50 l/min including roller conveyor

Condition: used, Year of construction: 2003, 265 mm 3280 mm 0,9 mm dimensions of saw-band 3280 x 27 x 0,9 mm 200 mm cutting Ø by 30° 130 mm mitre joint cuts -/+ degrees 90- 30 Codpfxexuv E Aj Ah Usri flat material 300x150/130x100 15- 100 m/min 2,0 kW 1,61 x 0,96 x 1,4 m weight 0,5 t Used automatic band saw with sided miter - rapid travers - roller conveyor - 20 new saw blades

Condition: used, Year of construction: 1974, saw-blade dia. 200 mm table-size 450 x 355 mm Credpjxvdtkofx Ah Usi table - tiltable 45 ° boring of saw blade 16 mm connected load frequency 220 V - on subframe -

Condition: used, Jrion HFS-170/15-SA long-cut circular saw for precise longitudinal cuts in solid wood, panel materials and wood composites. Cedpfxexvcacj Ah Uori cutting length: approx. 5,300 mm

Year of construction: 2016, operating hours: 68,000 h, condition: used, Serial number: CAI72xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20523 Crodpoxu A Eisfx Ah Uei Specifications: Model year: 2016 Hours: Approx . 68,000 Voltage: 400V Maximum pressure: 8.25 bar Weight: 360 kg Condition: Ready for delivery Description: The compressor is from 2016 and has run for approximately 68,000 hours . Ready for immediate delivery. Hours: 68000 Total Weight: 360

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Worktable: 1000 x 720 mm Worktable height: 980 mm Worktable tilt: 0-20° Motor: 3.0 kW Max. cutting height: 450 mm Max. cutting width: 720 mm Saw wheel diameter: 740 mm Saw blade speed: 1540 m/min Saw blade length: 5340-5420 mm Precision guides above and below Extraction port diameter: 2 x 120 mm L x W x H: 1180 x 820 x 2430 mm Cjdpomxp I Aofx Ah Ujri Weight approx. 5610 kg Availability: short-term Storage location: Flörsheim

Condition: good (used), 1 used horizontal bandsaw automatic machine Kasto Model HBA 360-600 U Cutting diameter: 360 mm Saw blade dimensions: 5734 x 38 x 1.3 mm Shortest cut length: 10 mm Cutting speed: 20 - 130 m/min Drive power: 5.5 kW Coolant system Operating voltage: 400 V Total power requirement: 8.0 kW Crjdpoxuqyhefx Ah Uji Machine weight: approx. 1.8 t Space requirement: approx. 2.85 x 1.75 x 2.00 m Control: conventional

Year of construction: 1994, operating hours: 34,200 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20522 Specifications: Year of production: 1994 Hours : Approximately 34,200 Voltage: 400V Condition: Works as it should Delivery status: Ready for delivery Description: Credpfx Ahsxu A Ecs Uei The compressor was produced in 1994 and has run approximately 34,200 hours . It works as it should and is ready for immediate delivery. Hours: 34200

Year of construction: 2020, operating hours: 6,000 h, condition: used, Serial number: API17xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20525 Cedpfoxu A D Eox Ah Usri Specifications: Production year: 2020 Voltage: 400V Hours : Approximately 6,000 Power: 75 kW Speed : 2,960 rpm​ Weight : 1,570 kg Condition: Ready for delivery Description:Solid unit manufactured in 2020, with approximately 6,000 operating hours . Ready for immediate delivery. Hours: 6000 Total Weight: 1570

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20526 Specifications: Model: AD500 Year of Manufacture: 2020 Voltage: 400V Maximum Working Pressure: 14 bar Weight: 165 kg Condition: In good working order Delivery Status: Ready for delivery Description:Pneumatech AD500 refrigerated air dryer, manufactured in 2020. The unit is in good working condition. Ready for immediate delivery and use. Cjdpfexu A Dfjx Ah Ujri Total Weight: 165

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19238 Specifications: - 2020 model - 380 hours and 830 hours - Pump is Atex and EX approved - DNV 2.7.1 Containers - Volvo Motors - Light - Ready for delivery Description: Cjdpfjvg Abxjx Ah Ueri We are talking about 2 identical pumps, both of which have conversion kits. Set 1: 2500 bar 40l/min Set 2 1000 bar 100L/min The pump has been running for 380 hours and 830 hours, respectively The pumps are Atex and EX approved according to Zone 2 offshore use The pump is built in DNV 2.7.1 containers We have machine card on one machine It includes various sensors for the machine, which are fully encapsulated in ex enclosures. Ready for delivery. Own weight: 1 Model: 2 stk 2020

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19981 Description:Handtmann VF 320 meat grinder for making sausages, equipped with automatic twister. Crsdpfx Ahsxt Dgro Usi The machine has been in operation until March 13, 2025 and has worked. It is ready for immediate delivery.

Year of construction: 2002, operating hours: 5,882 h, condition: used, Serial number: FTP-52xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21703 2002 Finlay 683 – 2-deck screening plant with only 5,900 hours on SEMI! 5,882 hours 2 decks Good belts Good rollers On 2-axle semi-trailer Decent tires Steel suspension Type 683 plant, 12x5 screen Deutz engine Remote control for the grid not working Video available Ready for delivery Crodpfx Ajxt Dg Ssh Usi We are selling a well-maintained Finlay 683, 12x5 screen, 2-deck screening plant on semi with only 5,900 hours.Remote control for the grid is not working, so it must be operated manually.Ready for delivery. Hours: 5882 Own weight: Model: 683

Condition: used, machine/vehicle number: YS2R4X2000219xxxx, mileage: 153,000 km, Year of construction: 2024, Please contact ATS Norway for more information Please provide reference number upon request: 19971 Specifications: - Km: Approx. 153,000 (can increase) - Transmission: Automatic - Air suspension - Euro 6, 540 hp - Good parts - 4x2 - Retarder/Engine brake - Stiholt on construction - Extra lights on roof and grill - Michelin guys - Rotor lamps - LED light - Bed - Refrigerator - RGB Led throughout the cabin, remote control - Radio/CD - Air conditioning/AC - Ready for delivery Description: Scania R540 4x2 Truck from 2024. Rare opportunity to secure a nice truck with stiholt building and an interior decorated with AC/DC pictures. Ready for delivery. Csdpfxsv U S T He Ah Ujri Km: 153000 HK: 539 Technical approved: Yes EU-approved until: 01.02.2026 Own weight: 8700 Total Weight: 22000 Payload: 13300 Width: 255 Length: 616 Euro: 6 Model: R540 Gearbox: Automatic

Year of construction: 2019, condition: used, Serial number: 6xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21657 Specifications: 2019 model 1493 hours Weight: 1600 kg Yanmar engine Defective turtle function Light Errors and omissions ready for delivery Description: We have a 2019 Ammann Roller for sale. The turtle function does not work on it. Other than that, it works as it should according to the owner. Errors and shortcomings exist and some cost must be taken into account. Ready for delivery Cedpfxoxq U Uzj Ah Uori Own weight: 1600 Model: Vals