Used Saw Shaft Construction for sale (29,421)

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Kaltenbach, Double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: swivels 45° -Saw blade: Ø 490 mm -Accessories: incl. additional saw blades, see photos Ksdpfoh U U S Rox Agzefa -Overall dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg

Condition: used, Year of construction: 2005, Technical Data: Cutting Capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest remnant length: 35 mm Total connected load: 2.0 kW Saw motor, frequency controlled output: 1.5 kW Infinitely variable cutting speed (frequency controlled): 20 – 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and Weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height (upper section lowered), approx.: 1460 mm Height (upper section raised): 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Kfsdjx Irx Iepfx Agzea Equipment: - Carbide saw blade guides, replaceable - Mechanical material clamping - Hydraulic feed for cutting - Mechanical saw blade tensioning - Saw blade cleaning by a driven, easily replaceable wire brush - Coolant system: feed via 1 coolant nozzle and 1 coolant hose, tank capacity approx. 45 l, pump performance 16 l/min

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Weight 570 kg Total power requirement 3 kw Ksdpfov A Hgdex Agzsfa

Year of construction: 1989, condition: used, cutting diameter 420 mm saw band length 6300 mm table height 700 mm 0 5,5 kW cutting speed 20-130 m/min min. cut-off length 6 mm min. dia. 10 mm weight of the machine ca. 2,9 t dimensions of the machine ca. 2,4x3,3x2,4 m Kfsdpfxsrc I H Es Agzsa Fully automatic band saw, saw band tension hydraulic, cutting feed continuously variable, material feed hydraulic, automatic feed with horizontal vice. Clamping force: approx. 400-2000 daN Coolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min.

Condition: used, Rema type DMGB-35 double cross-cut saw including discharge conveyor belt for cutting wood to length on both sides. This machine was used specifically to cut doors to size. In its current state, the cutting length is limited to 1,000 mm, but can be extended. Kfsdpfxjv Hgb Ne Agzoa tape length: approx. 1,700 mm + 2,700 mm cutting width: max. 2,500 mm cutting height: max. approx. 80 mm

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20721 Specifications: S70 mount, but a little wider For excavator Works as it should Weight: 645 kg Ksdpfewrl T Tex Agzsfa 172 Bar Ready for delivery

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine Kjdpsgzc Iyefx Agzjfa -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS pump unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, subframe/base divided for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Kfjdpjv Hr Nxjfx Agzja

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9000x1400x1680 mm Weight 1600 kg Kfodpfx Agov A E Ndszsa Total power requirement 7,5 kw - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg

Year of construction: 1976, condition: used, cutting diameter 460 mm saw band length 4623 mm Kfsdpfsrc I Htjx Agzsa table height mm 0 4 kW cutting speed 8-80 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 2,3y2,7x2 m

Year of construction: 2012, condition: ready for operation (used), This BOMAR Induvidual 620.460 Ganc was manufactured in 2012. It features a chip conveyor, enhancing its functionality as a metal band saw. Consider the opportunity to buy this BOMAR Induvidual 620.460 Ganc metal band saw. Contact us for more information. Application Types Kfedpfjx Eni Dex Agzsa Sawing

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Kfodpfx Ajxnlgcjgzja Storage location: Garbsen

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left Kfsdpfxjgylq Io Agzoa -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator, drive power: 250 kW, control cabinet with star-delta starter. Rotor length: 1200 mm, rotor diameter: 800 mm, number of knives/rotor: 36 pcs, number of knives/stator: 4 x 6 pcs. 2 hydraulically swiveling stators with 2 rows of counter-knives each. Hydraulic pusher, bearing temperature monitoring, central lubrication for rotor bearings. Net weight: 29,800 kg. Year of manufacture: 2005, overhauled in 2025, all wear parts have been replaced. Kedpfx Ajxiw Hwogzjfa

Condition: used, Year of construction: 2022, cutting diameter 330 mm saw band length 4900 x 34 x 1,1 mm table height 750 mm capacity 90 degrees: flat 350 x 330 mm 15 - 150 m/min workpiece weight max. 670 kg/m kg 3,9 kW 2600 kg 1700 x 2400 x 2200 mm *Special equipment: - Screw chip conveyor - Zero stop - Material database - Clamping pressure regulation - Swiveling control panel - Job menu - Multi-bar clamping device - Cut control - Micro-dosing system - LED work light - Work table on the discharge side - Water spray gun - Coolant level and flow monitoring - Opening on both sides / shortened remnant piece - Material monitoring Kjdpfx Agjx E Dptezofa - Laser light for cutting line display/scoring saws - Vertical roller

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA Kfodjx H S Tiopfx Agzsa - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: used, Year of construction: 2008, total length: 1,960 mm, load capacity: 350 kg, Construction machinery Kfodpfxsx H Aq Eo Agzja Avant Tecno Oy 220 Drive Diesel Year built 2008 Lifting weight (kg) 350

Condition: used, Longitudinal circular saw Jrion Type HMS for precise longitudinal cuts in solid wood, board material and wood composites. Availability by arrangement from February 2026. Kedpfx Agjx D U Saszefa cutting length: approx. 5,200 mm cutting width: about 700 mm

Condition: good (used), Code: 0271 Brand: STROMAB Model: TR 600 MATRIX 2 PLUS - CE Standard Automatic cut-off saw with electronic pusher MATRIX 2 PLUS ( mm 8000) for the production of pallets, packaging, door and window frames, furniture and garden furniture, carpentry and various - CE Standard Technical data: Blade diameter mm 600 Motor Hp 12,5 Blade speed min 3000 Working table height mm 850 Hydraulic blade unit drive Blade lifting speed regulator Cutting area protection cover Bimanual hand guard control Cutting capacity Width 610 mm - Height 30 mm Width 580 mm - Height 60 mm Width 530 mm - Height 100 mm Width 490 mm - Height 120 mm Width 450 mm - Height 140 mm Width 380 mm - Height 160 mm Outfeed flat table Suction ports n° 3 diameter mm 100 Numerically controlled pusher MATRIX 2 PLUS Technical data: Kedpex Ikvljfx Agzofa Maximum working length mm 8000 Feeding system featuring precision rack and brushless motor Positioning reading on magnetic stripe Positioning precision +/-0,4 mm Pneumatic rising of the pusher with workpiece measurement sensor Main system: Cutting cycle (pattern) editing by keypad, by remote PC via serial port (RS232) or by Ethernet Working software: A) N° 99 programmable cutting cycles with 15 sizes (lines) per cycle - Example of cutting cycle: Board length, trim cut , 1 size (line).....15° size B) N° 1 cutting cycle with 100 programmable sizes to be cutted in sequence Exit surface 4000 x 600 mm Compressed air 7 bar Overall dimensions of assembled machine: mm 13000 x 2000 x 1600 h Overall dimensions for transport : Machine mm 1200 x 1700 x 1600 h - Matrix pusher mm 8800 x 1500 x 1500 h Weight kg 1600

Condition: used, Year of construction: 2007, Technical data: Speed: 2800 1/min Ksdpfx Aerwlwvegzsfa Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Condition: new, saw blade diameter 350 x 32 mm capacity degrees: round 1 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 180 x 95 mm Ksdpjxaab Ssfx Agzefa capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 125 x 95 mm capacity 60 degrees: round .0 mm capacity 60 degrees: square x mm capacity 60 degrees: flat x mm

Condition: used, Year of construction: 2013, operating hours: 17,526 h, functionality: fully functional, overall weight: 29,900 kg, number of blades: 112, control cabinet length: 1,500 mm, rotor length: 2,800 mm, power: 2 kW (2.72 HP), rotational speed (max.): 112 rpm, The LINDNER POLARIS 2800 is a powerful, high capacity single shaft shredder that is primarily used for the shredding of waste with foreign parts – like for example pre-treated domestic waste, commercial and industrial waste, as well bulky waste etc. The resultant output material is an defined granulate which could be used direct for incineration. The POLARIS 2800 can be optimally adapted for different applications by individual configuration and equipment components. Kfedpfx Agewhyygszea this machine was manufactured and had extensive repair work in 2016 £150k ex works uk

Condition: good (used), Code: 0181 Brand: HARWI - NEDERLAND Model: 130 - CE Standard Circular saw with tilting blade for cutting solid wood, panels and various materials - CE Standard Kfedpfx Agow Du E Aozea Technical data: Sturdy structure Tilting blade 0-45° Max cutting height 110 mm Cutting height at 45° 90 mm Blade diameter mm 400n F30 Cutting width mm 680 Motor power Kw 5,5 Upper protective cover New Vidia blade included Suction port diameter mm 120 Overall dimensions mm 1300 x 1350 x 1350 h Weight kg 320

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Kodpfx Aew Dfnhsgzjfa Weight 2000 kg

Condition: good (used), Code: 0215 Brand: STROMAB Model: PS 45/F - CE Standard Manual pendulum saw for cutting wooden boards, packaging, wooden fixtures, carpentry, sawmills, and various - CE Standard Technical data: Blade diameter mm 450 F30 Motor Hp 5,5 Kfjdexivzaspfx Agzsa Motor speed rpm 2800 Cross-cut capacity mm 510 Depth of cut mm 130 Manual feed Inlet roller table Outlet roller table Extractor hood diameter mm 150 Overall dimensions mm 3800 x 1500 x 1850 h Weight kg 290