Used Schneider Switchboards for sale (190)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1950x690x1700 mm Phjdpjvz Eklefx Agzja Weight 426 kg Total power requirement 5,5 kw

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Equipment and technical data: - with dual-lift spindle, pneumatic - mandrel diameter: 40 mm - with large table length: 2500 mm - with extendable frame support - with milling fence featuring Panhans metal jaws and fine adjustment Phjdjwka E Uopfx Agzja Availability: short-term Location: Röllbach

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Phedpfxex Hqlwj Agzja Pallet/sheet dimensions: 760 x 1090 mm

Condition: used, Stack paper cutting machine, guillotine cutter, flatbed cutter SCHNEIDER Type Senator 155 Pjdpfx Agsdzqnyezeha Rubber, paper and veneer shear, plastic shear, fabric shear Rubber, paper and veneer shear Machine no. 60178 Year of manufacture 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Feed height: 140 mm Back gauge: max. 1550 mm Knife drive motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade stroke release - Automatic pressing by pressure clamp holds the paper stack on the table - Manual clamp and stroke release via foot pedal (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electrical control unit (not operational), no wiring diagrams, no user manual - Back gauge adjustment via servo motor (motor, controller, and control unit present, not operational) Required space (L x W x H): 325 x 270 x 165 cm Space required for transport without disassembly: length 330 cm x width 270 cm x height 175 cm Space required for transport with disassembly: length 550 cm x width 220 cm x height 175 cm (machine + separate table) Machine: length 270 cm x width 190 cm x height 175 cm Side table: length 240 cm x width 170 cm x height 120 cm Weight of assembled machine: approx. 5000 kg (excluding the transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sale price does not include the 20 mm steel plate the machine is stored on. (Price for the steel plate: 900 EUR net)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Tilting Spindle Moulder SCHNEIDER SH 1/2 Very good condition, the machine comes from an assembly company and was only used for modification work. In recent years it was no longer needed, which is why it is now for sale. Everything works perfectly. All bearings and guides are OK. Year of manufacture: 1990 The machine features an upper-mounted control panel. Both stop jaws on the fence can be adjusted in depth, enabling jointing operations, e.g., when producing a glue joint profile. Equipped with spindle lock via lever. Very efficient chip extraction with 2 x 120mm extraction ports, one on the fence and one on the machine table. Fitted with a 30mm spindle, infinitely tiltable from -5 to 45°, spindle tilting is operated via a handwheel with a highly accurate mechanical dial indicator. Pedpfx Agjx Ncuvjzjha With clockwise/counterclockwise rotation. We offer personal delivery and demonstration throughout Germany for €220.00, so you have no risk when purchasing. Shipping to Austria and the rest of the EU is available on request. Features a large table opening, which can be reduced with various rings (allows for safe routing with small cutters and usage of very large diameter tooling). Selectable spindle speeds: 3000, 4000, 5000, 6000, 8000, and 10,000 rpm. Maximum cutter diameter: approx. 280mm. Spindle height adjustment also via handwheel; includes a highly accurate mechanical dial indicator. Table is made of heavily ribbed cast iron. Interchangeable spindle (a 40mm spindle can also be fitted). Very robust and durable construction, designed for the heaviest routing tasks, suitable for all routing applications. Optimal power transmission via V-belt drive. Includes operating manual. Comes with a 3-roller power feeder ELU Type MVA 34, feed speed is infinitely adjustable from 3 to 23 m/min. Power feeder offers right/left rotation; feed rollers are individually mounted. Machine table dimensions: 1150mm wide x 840mm deep. Machine is ready for immediate operation. 380V, 4900 and 5800W via the two-speed motor. Approximate machine weight: 850kg. Equipped with motor protection switch against overload. Professional-grade, not DIY store quality. Optimal, simple, fast, and safe operation.

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter Pjdoxnb Txopfx Agzeha -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D55N4 -Power: 55 kW -Input: 380-480V / 50/60Hz / 97.2A -Output: 380-480V / 0-500 Hz / 106 A -Quantity: 1 frequency converter available -Price: per piece -Dimensions: 800/290/325 mm -Weight: 54 kg/piece

Condition: used, For sale are two units from Schneider & Koch: one TS-LV6 and one LV-Compact, both manufactured in 2016. Both units were in operation until recently. Podpfeww Enbsx Agzeha

Condition: used, Schneider SF 60 Envelope Feeder: Single-sheet envelope feeder, year of manufacture: unknown, in good condition, immediately available. Phedsx Af T Ejpfx Agzsa Please request a quotation. If you are interested, we are also happy to inform you about other machines in our inventory. You are welcome to arrange an appointment to inspect the machine at our premises.

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Pedjx Ih D Tspfx Agzjha

Year of construction: 2021, condition: good (used), Motor output 7,5 kW Overall size ca. (L x B x H) 1.935 x 6 mm Weight ca. 447 kg Receiver 500 L Max. pressure 13 bar Phsdoxzuxbjpfx Agzja

Year of construction: 2024, condition: used, New demonstration machine! List price: €13,585. #4152018486 Description: Durable, directly driven compressor blocks. Maximum user convenience thanks to the AIR ENERGIE CONTROL 3+ electronic control system with direction of rotation monitoring, display of operating hours, maintenance schedule, service notifications, load hours, etc. Equipped with integrated refrigeration dryer: DK 1200 SMART refrigeration dryer mounted on tank. Turnkey installation thanks to integrated dryer. Optimally adapted to actual air consumption via speed regulation. Simple operation and maximum user comfort via the user-friendly electronic control system. Requires minimal space thanks to compact dimensions. Significant time and cost savings in maintenance due to easy access to all service parts and direct drive. Extremely quiet operation due to sound-insulated housing. Easy installation of exhaust duct thanks to top-mounted exhaust outlet. Prevention of costly damage at start-up due to integrated direction of rotation monitoring. TIP: Screw compressors with integrated refrigeration dryer mounted on tank are extremely space-saving and guarantee high air quality. Technical data: Final compression pressure: 12.5 bar Working pressure: 5-12.5 bar Free air delivery at working pressure (ISO 1217): 270-1,224 l/min Compressor speed at 7 bar: 5,023 rpm Rated drive motor output (V/Hz): 7.5 kW (400V/50Hz) Drive motor protection class: IP 55 Sound pressure level (LPA1 DIN 45635 T13): 64 dB(A) Air outlet connection: 3/4" i Tank volume: 500 l Dimensions (W x D x H): 1935 mm x 655 mm x 1680 mm Weight: 427 kg Technical data – Refrigeration dryer DK 1200 SMART: Flow rate at pressure dew point +3°C: 1200 l/min Pressure: 7 bar Pressure loss: 0.25 bar Voltage: 230V/50Hz Power consumption: 0.23 kW Air connection: 3/4" a Refrigerant filling: R134a Podpfx Agjutux Sjzjha Location:

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Schneider Electric, housing for crane remote control / pendant control -Type: XAC-A08 -Transport dimensions: 560/80/70 mm -Weight: 1.1 kg Pedsxzqb Sopfx Agzsha

Condition: excellent (used), CATALOG NUMBER 7617 TECHNICAL DATA - Wheel diameter: 610 mm - Table dimensions: 670x640 mm - Table tilts, angle adjustable - Motor: 2.2 kW - Brake - Max. cutting height: 380 mm Psdpfx Aowbdnuegzoha - Throat distance (blade to frame): 550 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1150x800x2200 mm - Weight: 360 kg ADVANTAGES – German-made – Not repainted – In very good condition – Used saw Net price: 7900 PLN Net price: 1880 EUR based on a rate of 4.2 EUR (Prices may fluctuate with significant exchange rate changes)

Year of construction: 2010, condition: used, Used machine Used Schneider screw compressor type AIRMASTER AM 7-10 with Schneider DK 985 ECO refrigerated compressed air dryer and compressed air tank. Year of manufacture: 2010 Compressor technical data: Volume flow: 930 l/min Final compression pressure: 10 bar Motor power: 7.5 kW Refrigerated dryer technical data: Phedpjxy Avlsfx Agzja Air volume flow: 985 l/min Max. operating pressure: 16 bar Refrigerant: R134a Air connection: 3/4'' internal Power consumption: 0.3 kW Compressed air tank technical data: Tank volume: 270 l Max. operating pressure: 16.5 bar Availability: by arrangement Location: Flörsheim

Condition: good (used), Sls 280 joinery saw, pneumatic, with rotary table and roller conveyors Podpfxjx Il Rwo Agzjha

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard with all safety fittings and electrical connection cable with plug and Condor pressure switch Air receiver equipped with safety valve, receiver pressure gauge and condensate drain valve. Welded rear handle improves loading and transportability Fully automatic operation due to pressure switch with start-up relief, motor protection and on/off switch With upscale equipment for universal use With V-belt drive, 2 cylinders in series arrangement for particularly smooth running and 400 V three-phase motor with external motor protection Low compressor speed - thus protecting the compressor components, lowering the noise level and reducing vibrations Large fan flywheel for optimal cooling Including filter pressure reducer for regulated compressed air, cleaned from condensate, dirt and oil With 2 m rubber-coated supply line and air outlet via quick coupling Supply line with phase inverter 10 years warranty on tank against rusting through Podpfjbyhvrox Agzsha Technical specifications Pressure 10 bar Suction capacity 510 l/min Filling capacity 390 l/min Speed 1240 min-1 Reservoir volume 90 l Weight 80 kg Noise level 97 dB(A) Dimensions (WxDxH) 1070x495x895 mm Drive power 3,0 kW Voltage 400 V Location: ex stock Bitburg subject to prior sale

Year of construction: 2023, condition: used, New demonstration unit! List price €2,986 net! Technical data: Pressure: 10 bar, Suction capacity: 650 l/min, Effective delivery rate: 520 l/min, Drive power: 4.0 kW, Speed: 1025 rpm, Tank capacity: 2 x 90 L, Weight: 175 kg, Noise level: 83 dB(A), Air outlet: 1/2" internal, Dimensions (W x D x H): 1200 x 800 x 1240 mm. Design: Belt-driven piston compressor mounted on two horizontal pressure vessels, fully assembled on a safety pan, including complete equipment. The ready-to-connect unit includes: - Pressure switch for fully automatic operation - Start-up relief and motor protection - Safety valve - Non-return valve - Pressure gauge. The belt-driven compressor unit allows all components to be clearly arranged, and components subject to maintenance can be easily removed or installed. Location: Rieth. Phedjvxxvijpfx Agzea

Condition: excellent (used), Dissolver Schneider SH 07 Vacuum dissolver Ex-protected version Phjdpfxsimgqme Agzsa with wall scraper Drive power 13 kW power wall scraper 2,5 kW speed range 380-2000 1/min Mixing tank stainless steel double jacket 2 x 100 l usable capacity, 50 l capacity heating chamber Mixing tank stainless steel 1 x 200 l Very good condition, directly from production!!!

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen -Manufacturer: Schneider Electric, Touchscreen Panel with Housing -Type: HMISTO715 -Voltage: DC 12-24V Phodpsxxvkaofx Agzoa -Dimensions: 150/145/H160 mm -Weight: 1.4 kg

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Fully mounted and previously operational on-site, this complete hydrogen pilot plant includes a range of high-quality mechanical systems. Please refer to the extensive equipment list for details. Pedpfx Agexlch Eezsha Note: The sale is ongoing, and the list may not be complete — some parts may no longer be available.

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Features and Technical Data: Phsdpfsxymfdex Agzea - Designed for all window tool systems up to 400 mm tool diameter - Thanks to the standard braking devices (foot brake for slot spindle, automatic electronic safety brake for saw), the machine can be stopped within a few seconds - The protective hoods for the slot spindle and cross-cut saw are designed so that tools can be easily and conveniently changed without having to remove the hoods themselves - The cross-cut saw can be conveniently adjusted from the operator’s position using a quick adjustment. A six-position turret allows for fast changeover to different dimensions - The 40 mm slot spindle can be precisely adjusted in height via a conveniently positioned handwheel with 0.1 mm graduations - The stable roller table, in combination with hardened and ground guides, can be moved easily with minimal effort - Slot spindle motor: 5.5 kW - Slot spindle speeds: 3000/4500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slot spindle height adjustment: 100 mm - Extraction nozzle: 120 mm - Cross-cut saw motor: 2.2 kW - Cross-cut saw speed: 2950 rpm - Saw blade mount: 30 mm - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping - With Festo LAS stop Weight: approx. 600 kg Availability: short-term Location: Flörsheim

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Pjdpsvmivcsfx Agzoha Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: new, functionality: fully functional, machine/vehicle number: ATV68C15 N4, input voltage: 400 V, input current: 234 A, type of input current: AC, input frequency: 80 Hz, protection type (IP code): IP00, year of last overhaul: 2025, continuous power: 132 kW (179.47 HP), Equipment: type plate available, Exact type designation: Schneider Telemecanique ATV68C15 N4 Output power and output current: 132kW | 250A ° NEW in original packaging! ° Formed! ° Easy to use thanks to the integrated control panel ° Fast parameterization possible ° Original operating instructions for commissioning included Psdpek Iuq Defx Agzjha Only 1 more in stock!

Condition: good (used), PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board, PCB, isolated gateway Manufacturer: LCL, PCB isolated gateway made of Pro-face monitor Schneider Electric GP-4301TW -Type: -Quantity: 4x circuit boards available (1x with accessories, see photos) Price: per piece Phedexxp Hnopfx Agzoa -Dimensions: 130/125/H20 mm / 130/125/H25 mm -Weight: 0.1 kg / 0.3 kg

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen -Manufacturer: Schneider Electric, Touchscreen Easy Panel PC, Performance 18.5" -Type: HMIPSPS952D1X01 -Voltage: DC 12-24V -Dimensions: 470/55/H295 mm -Weight: 4.5 kg Pjdpfx Ajxw R I Rjgzsha