Used Scm Concept 2000 for sale (656)

Condition: excellent (used), Multisaw scm m3 - track width 300 mm - cutting height 120 mm - engine power 37 kW - weight 1800 kg Isdpfoi Ewnasx Ap Dsbc - year 2003 - max. element width 100 cm - min. element length 40 cm - smooth adjustment of feed speed - three rows of anti-kickback pawls - spindle diameter 50 mm - sleeve diameter 70 mm - sleeve equipped with spacers and 5 saw blades 350 mm - blade diameter from 200 to 350 mm - automatic central lubrication - four upper pressure rollers – a set of keys Machine and tape in very nice condition.

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz Iedpfxsc S Di Re Ap Dobc edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: new, Rusticating machine for wooden artefacts such as boards, profiles, beams and strip wood for flooring, with maximum width 40 or 60 cm x 30 cm high. hight adjustment via hand wheel and numerical read out brush DM 200 mm machine in CE working width 600 mm max. working height 300 mm suction DM 2 x 140 mm motor feeder 0,37 kW Iedpfjdd Hi Ejx Ap Djbc feeder speed variabel 3 - 20 m/min motor brushing aggregate each 4,0 kW machine weight approx 750 kg inkl. 1 steel brush DM 200 mm 1 TYNEX brush DM 200 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Voltage: 400 V Frequency: 50 Hz Ibodpfjtr A Evex Ap Doc Weight: 3200 kg Number of axles: 3

Condition: excellent (used), SURFACE PLANER model SCM MINIMAX F1 Iodjn Dw N Dopfx Ap Dobc second hand machine in Excellent working conditions CE regulation: YES instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50 OTHER Surface Planer machines available as in photos

Condition: excellent (used), SCM M3 multi-track saw Width of track 300mm Cutting height max 120mm Main engine power 37kw Feed speed adjustable on variator 6-45m/min Ibodpfxom Rg Dge Ap Dec Disc diameter max/min 350/200mm Maximum piece width 1000mm Minimum workpiece length 600mm 3 rows of anti-rejection latches Spindle diameter 50mm Bushing diameter 70mm Central track lubrication CE certificate Extraction spigot 200mm

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes In perfect working condition 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Ibsdpfx Apjxg El Ae Dsc Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available.

Condition: used, AD planer Minimax 310, good condition, 2.2 kW, 200 kg. Price changes reserved, subject to errors, printing and typographical mistakes. Ibjdox H Udqopfx Ap Dec

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 160 mm, number of axes: 5, This 3-axis SCM PRATIX 25 CNC Wood Machining Centre was manufactured in 2015. It features a large working area of 3100x1550 mm, a 5-axis milling head, and dual tool changers with 10 and 16 positions. Equipped with a powerful 16.5 hp motor and a vacuum pump capacity of 100 m³, it supports HSK F63 clamping and Xilog Plus software. If you are looking to get high-quality milling capabilities consider the SCM PRATIX 25 machine we have for sale. Contact us for more information. • 5-axis milling head • Motor: 16.5 hp • Lateral tool changer: 10 positions • Turret tool changer: 16 positions • F18 drilling unit with saw in X direction • HSK F63 clamping system Ibsdpfx Apozug R Ns Dec Additional equipment • Vacuum pump: 100 m³ • Xilog Plus software

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. • Number of milling spindles: 2 • Tool clamping system: HSK-F63 • Vertical drill spindles: 96 • Horizontal drills (X/Y): 32 / 4 • CE mark Additional equipment Iedpfx Ajzuhcgjp Dsbc • Barcode reader • Enclosed fence • Light barrier • DXF interface • Software: SCM XILOG PLUS

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) Isdpfxszxc Nce Ap Dsbc With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: good (used), SCM Sandya 5 Iedjzv Tzqspfx Ap Djbc - 110 cm sanding width - 2 sanding belt speeds - Rubber-coated roller, rubber-coated roller, and shoe

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm Isdpfx Apezx U Nus Dsbc motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit

Condition: like new (used), working width: 1100 mm unit with steel roller 2nd unit rubber with pad motor power: 11 kW oscillation via photocells 2 conveyor feed speeds Ijdpfjzyaazsx Ap Debc pad automatically triggered with adjustment units switched on from the control panel material thickness sensor year of manufacture: 2002

Condition: excellent (used), working width 1100 mm calibrating unit with metal roller Iodpfezyafwjx Ap Dsbc calibrating unit with rubber roller combination unit with rubber roller and pad activation of machine functions from the control panel pneumatic oscillation pneumatic belt tensioning motor power: 9KW and 9KW, total power 18.5 KW two feed speeds for the conveyor material thickness gauge two feed speeds for sanding belts emergency stop switch

Condition: excellent (used), functionality: fully functional, working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Ijdpfezz Nmmex Ap Djbc

Condition: like new (used), Year of construction: 2005, functionality: fully functional, overall weight: 4,500 kg, The machine is in new condition. Ibsdjzwfqgepfx Ap Dec The price includes the tool. Details in the pictures.

Condition: ready for operation (used), working width: 240 mm working height: 150 mm spindles: 5 spindles set: bottom/right/left/top/bottom spindles speed: 6000 RPM spindles diameter: 40 mm Isdpfx Apjzxycto Debc minimal diameter of tool: 100 mm max diameter of tool: 200 mm motors: 3x 5,5kW; 2x 4kW; 2,2kW pneumatic pressure of feeding rolls year: 2010

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Iedpfx Aozxyfzop Debc Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Safety feature: Photoelectric cell Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Condition: excellent (used), Year of construction: 2001, working width 410mm tables lenght 2630mm 4-knives shaft motor with brake horizontal drill included drill table 250x570mm year 2001 Ibedpfx Apozxyr Us Dec

Condition: like new (used), working width 630 mm stepless feed adjustment 4-knife cutterhead Ibjdpfozxyu Ajx Ap Djc maximum workpiece height 240 mm electric height adjustment 7.5 kW motor star-delta start 380V power supply

Condition: used, optional equipment: Machine table in 2 support systems – left table half with TVN supports, right table half with ALU table and its own vacuum circuit. Travel ranges: X = 4400 mm, Y = 1720 mm, Z = 400 mm Tool holder HSK 63 F Motor 7.5 kW, 900 - 20,000 rpm Inverter 18 kW for spindle unit – increased power output up to 11 kW Tool changer RAPID 24 = 24 tool positions Drilling unit with 18 spindles Equipment for door processing (H = 110 mm) - for processing left and right doors - with 4 pneumatic positioning aids, each with a capacity of 20 kg - 6 reference stops with veneer overhang Laser positioning for TV system Central extraction connection above the CNC unit Vacuum pump 250 m³ Control system/control cabinet: - NUM Series 1000 with Office PC Ibsdpjzxzgmjfx Ap Dsc - XILOG-PLUS - Cable remote control - Analog modem with software for teleservice Swinging machining standard for 2 work areas LED display / suction cup positioning Motorized chip conveyor 3-part floor mat / front Large accessory package with vacuum suction cups, stops, etc. Machine from a carpentry business closure due to retirement Machine is still in operation and in very good condition available at location

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Ibsdpfx Apezx Amno Djc Horizontal drills along X-axis: 4 pcs Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Central lubrication pump Vacuum raster table Edge milling unit along X-axis Year of manufacture: 2011

Condition: excellent (used), Year of construction: 2003, Edge banding machine SCM Iodpfszynngjx Ap Debc Type: Contour

Condition: used, Year of construction: 2005, Technical specifications: - Machining area: 2500x1000 mm - Travel range X-axis: 2980 mm - Travel range Y-axis: 1280 mm - Travel range Z-axis: 200 mm - Programmable speed in the X-axis: 25 m/min - Programmable speed in the Y-axis: 30 m/min Ibodpfxozuxhtj Ap Dsc - Programmable speed in the Z-axis: 22.5 m/min - Vector speed: 40 m/min - 16 spindles, 4000 rpm, 2.2 kW (10 vertical and 6 horizontal) - Electric spindle with 6.6 kW, 12000 - 18000 rpm, HSK-63 - Side tool magazine with 7 positions - Footprint (L x W x H): 6970x3000x2680 mm - Weight approx. 3295 kg