Used Scm F 410 for sale (577)

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display Kdsdpfjff Hdpex Ab Uew On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: used, Year of construction: 2018, 2x 14-fold tool changers, 6 clamping beams with vacuum clamps, travel paths (X/Y): 2,800x1,200 mm, control cabinet, operator terminal, vacuum pump, cooling unit, weight: 5,100 kg, footprint approx. 800x400 cm Kdjdpoxnamwsfx Ab Uew

Condition: excellent (used), Edgebander SCM K360 R HP Fluids Pre-milling cutters, Glue application by roller, Interchangeable glue tank Additional glue tank Kodsxva Tmjpfx Ab Uodw Pneumatic pre-cut guillotine, Fluids End trimming saws angle-adjustable for finishing Top/bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine features NC cutter control and pneumatic package, Max workpiece height 60 mm, Max edge thickness in roll 3 mm, Feed speed max 11 m/min, Machine in very good condition. Original mileage: 65,000 meters

Condition: ready for operation (used), Year of construction: 2003, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 110 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 25,000 m/min, feed length X-axis: 2,700 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 180 mm, nominal power (apparent): 10 kVA, torque: 24,000 Nm, controller manufacturer: esa, controller model: kvara 6, workpiece length (max.): 2,600 mm, workpiece width (max.): 1,100 mm, workpiece height (max.): 110 mm, Milling unit 6.6 kW HSK 63 F Tool changer with 7 positions Quick tool changer with 4 positions Drilling head with 14 bits Assistance tools for loading heavy workpieces Saw along X-axis 3 kW Vacuum pump 100 m³/min Worktable – length: 2500 mm Worktable – width: 1100 mm Kdedpfx Absxvr Ucj Uew Minimum spindle speed: 1500 rpm Maximum spindle speed: 24,000 rpm Maximum travel X, Y, Z: 2700 x 1300 x 250 mm Number of milling spindles: 1 Main motor power: 6.60 kW Total weight: 2700 kg Machine dimensions (L x W x H): 5000 x 2400 x 2500 mm Only 14,700 operating hours

Condition: used, Thickness planer SCM S 63 - used - Segmented pressure beam, Under-table roller, Separate feed motor ----- Technical specifications ----- Planing width: 630 mm, Kedpfx Aboxm R Uvo Ujdw Number of knives: 4 pcs., Passage height: 235 mm, Feed speed: 6 /9/12/18 m/min., Extraction nozzle Ø: 180 mm, Weight: 1035 kg

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Kdedpfow Idbyjx Ab Ujw Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1

Condition: new, Year of construction: 2025, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Kedjhp Rdlopfx Ab Ujdw Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Condition: excellent (used), Combination saw-spindle moulder SCM SI12 TW Carriage length: 1500 mm Scoring unit Spindle vertical adjustment Saw blade vertical adjustment Saw blade tilt up to 45 degrees Maximum saw blade diameter: 300 mm Spindle moulder spindle diameter: 35 mm Kedpfjxqluxsx Ab Uodw Spindle speeds: 3000/4500/6000/8000/10000 rpm Saw blade speed: 4000 rpm Scoring unit speed: rpm

Condition: used, Four-sided planer moulder SCM Sintex NTE Electronic four-side planing and profiling machine Planing width: 180 mm Planing height: 105 mm 4 spindles Spindle motor 1 + 4: 7.5 kW Kdodpfxsxqf Dye Ab Uew Spindle motor 2 + 3: 7.5 kW Spindle diameter: 35 mm Long infeed table approx. 2300 mm Spindle speed: 6000 rpm Feed speed: 6/12 m/min Electric height and width adjustment Lubrication pump incl. planing tools Machine WORKSHOP TESTED and in VERY GOOD CONDITION Available ex stock Lieboch / LEASING POSSIBLE

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Kdjdjxqggcepfx Ab Uow Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Catalogue number 6368 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 7 spindles: 1) bottom horizontal, 230 mm, 5.5 kW 2) right vertical, 130 mm, 5.5 kW 3) left vertical, 130 mm, 5.5 kW 4) top horizontal, 230 mm, 7.5 kW 5) top horizontal, 230 mm, 11 kW 6) bottom horizontal, 230 mm, 18.5 kW 7) universal, 230 mm, adjustable 360°, 5.5 kW - all spindles adjustable up/down, right/left - all spindles equipped with electric brake - spindle diameter: 40 mm - spindles 4 and 5 adjustable electrically up/down - top: 8 metal feed rollers, twisted, including 2 double rollers - top: 4 rubber outfeed rollers - top: 2 hold-downs - bottom: pawls Kedjhfl T Iopfx Ab Ujdw - bottom side: 3 hold-downs - bottom: 2 smooth metal feed rollers - bottom: 2 double rubber feed rollers - rollers pneumatically loaded - feed via Kardana shafts - stepless feed speed adjustment 5–36 m/min - feed motor 4 kW - electric thickness adjustment 0.75 kW - infeed table length: 1980 mm - fully enclosed in soundproof cabin - central lubrication for the table - extraction port diameters: 5x120 mm, 2x150 mm - dimensions (L/W/H): 5500 x 1840 x 1900 mm - weight approx. 5000 kg ADVANTAGES – Italian manufacture – 7-head configuration – suitable for wet and dry wood – universal final spindle – unpainted – used four-side planer, in very good condition Net price: 146,900 PLN Net price: 34,970 EUR, depending on exchange rate 4.2 EUR (Prices may vary in case of higher fluctuations)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 4,970 mm, travel distance Y-axis: 2,120 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, spindle speed (min.): 600 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 12,000 W, number of slots in tool magazine: 24, mount diameter: 350 mm, tool weight: 8 g, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Complete machine, with Coral filter system and SCM lifter for sale. The equipment has very little use. Numeric control machining centre, with mobile gantry and fixed worktable for the processing of solid wood and various types of materials: glued laminated timber, plywood, chipboard, MDF, Aluminium etc. Designed using the best three-dimensional solid modelling systems, the structure is composed of a machine bed and a mobile gantry made of electro-welded steel. Component's milling of machine bed are performed on high quality CNC machining centres, with one single positioning operation, in order to guarantee the very best planarity, perpendicularity and precise tolerances. The control unit is a numeric control interfaced with an industrial PC. The CNC solution with PC combines all of the qualities of numeric controls with the user-friendliness typical of personal computers. The PC allows to use the operator interface Maestro cnc, developed by SCM to make machine programming fast and simple even for the less skilled operator. Technical specifications: - drilled and tapped holes spaced 120x120 mm for vacuum connection of jigs and equipment fitting - groove scheme spaced 40 mm for suction cups or rubber gaskets - n. 2 working areas - max. dimension to work in Y direction = 2170 mm TELESOLVE teleservice via internet Mobile console with "eye-M PRO" integrated PC TECPAD - Remote machine control Mobile console with 7" touch-screen color monitor for control and management. PRISMA KT Machining Head The machining head with 5 interpolating axes, fixed directly to the mobile gantry, guarantees maximum strength during routing operations and provides top finishing quality also with high stock removal. Technical specifications: Routing unit with 5 interpolating axes − electro-spindle with HSK 63F quick release tool-holder − Rotation speed 600-20000 rpm − right and left rotation − max power (S1/S6) 11/12 kW (15/16.5 HP) from 9000 rpm − Inverter − C-axis rotation = 640° − B-axis rotation = 270° − C-axis equipped with TTS locking system (Total Torque System – SCM Patent) − "For Life" grease lubrication − liquid cooling with heat exchanger - Automatic dust extraction hood with four positions and ON-OFF by workpiece program. Two 250 (300) m3/h - 50 (60) Hz vacuum pumps Vacuum pump for each half-table. Independent vacuum circuit for each half-table. PRO-SPACE Safety system – full protection of the machining head with anti-ejection strips curtains and bumpers with emergency sensors - Emenency cable in the operator area - rear and side protection along the perimeter Enclosed cable-holder chain MAESTRO ACTIVE Human-Machine interface software (HMI) Maestro active is the new interface software (HMI) which has been unified across all SCM technologies. A single operator can easily and confidently run multiple SCM machines, reducing operator training times and facilitating entry into production. Windows 10 embedded 64 bit operating system Maestro cnc programming software Kdjdpowd Nrdsfx Ab Uew MAESTRO CNC SOFTWARE SUITE – USER INTERFACE AND PROGRAMMING Advanced nesting free-form + Label module for Maestro cnc Rapid 24 - Rear Tool store Circular tool store anchored to the mobile gantry. Max load 96 kg

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters Kdsdpfxeff Hdmo Ab Uow The extra long dressing tables made of one piece allow easy dressing of workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]

Condition: excellent (used), SCM F520 Jointer Ksdpfxsxp Ic Ne Ab Uodw Working width: 520 mm Four-knife cutterhead Traditional knives Electronic raising and lowering of the worktable Main fence adjustable up to 45° Table length: 3000 mm CE certificate DTR documentation

Condition: good (used), functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile second hand machine spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000 Kjdpfxjvzghro Ab Uedw

Condition: as good as new (ex-display), Year of construction: 2025, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Kjdpfsdqzh Tsx Ab Uedw Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), SCM K201 HF edgebanding machine Glue tank (granulate) Pre-cutting guillotine Pre-cutting saw Kdsdjtqu Nispfx Ab Usw 2 top/bottom edgebanding units 2 up/down polishing units

Condition: new, Year of construction: 2025, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Kjdpfx Asff Hdbjb Uedw Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: new, Year of construction: 2025, Large dressing tables made of grey cast iron The dressing table is adjusted via a precise parallelogram system so that the distance between the table tips and the cutter head remains the same in every adjustment position The large, stable dressing fence made of anodised aluminium is easy to move and can be tilted from 0° - 45 The inclination of the fence can be read from the workstation With auxiliary stop as standard Large four-blade shaft, precision bearing Smooth running due to precision unit and thanks to the heavy cast iron design Powerful industrial engine Highest possible user safety with simplest operation Display for chip removal via scale Manual table adjustment Motor protection switch Equipment details incl. fold-down auxiliary stop for narrow workpieces Manual quick adjustment of the chip removal with scale & clamping head The protection device The safety guard is foldable and designed to protect the operator without obstructing the work Models TERSA with Tersa planer knife shaft system No more adjusting and screwing Planer knife change in seconds Self locking Especially low noise Perfect planing result Dimensions and weights Length approx. 2750 mm width/depth approx. 1500 mm Weight approx. 680 kg Dresser Total length of the tables 2720 mm Feed table length 1498 mm Chip removal max. 8 mm Kdodpfx Abeff Efcj Usw Stop length 1200 mm Stop height 190 mm Swivel range of dressing stop 90 - 45 ° Dust extraction connection Suction nozzle diameter Thickness

Condition: new, Year of construction: 2025, Table milling machine minimax tw 45c With aluminum sliding carriage and swiveling milling spindle - high performance for a low investment Item number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights weight (net) ca. 290kg Connection suction suction connection diameter 2 x 120mm Working table Working table length 1000mm Sliding carriage length 1000mm working table width 435mm sliding carriage width 270mm table height 900mm Installation information Space requirement length 1945mm machine body width/depth 710mm Space requirement width/depth 2220mm Working area length 1600mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Working area Width/depth 1600mm Machine body Length 1000mm Explanation Working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Kjdjhp Rcyspfx Ab Usdw Supply voltage 400V Power drive motor 5,0kW Mains frequency 50Hz Milling spindle Spindle inclination 0 to -45° Spindle speed(s) 3500/7000/10000min¯¹ Useful length of spindle 100mm Spindle mandrel diameter 30mm spindle protrusion max. over table 130mm Milling tool diameter max. Tool diameter max. lowerable 180mm Tool diameter max. tenon milling 275mm tool diameter max. profile milling 210mm SUPPLY Arch milling protection hood Anodized aluminum sliding carriage Telescopic miter fence Aluminum stop jaws

Condition: new, Year of construction: 2025, Holzkraft Minimax ST 5es - Maximum equipment for professionals Saw-milling combination with miter cutting device and swiveling milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be tilted from 90° to -45 High-precision format sliding carriage made of anodized aluminum Large extension arm (1200 x 650 mm) With material roller and extendable aluminum telescopic fence up to 3300 mm Pivoting milling spindle from 90° to -45° backwards into the milling fence Ksdpfx Asd Hx Hmeb Uedw Four milling speeds With right-left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch With separate saw-parallel fence and separate jointing fence for dressing as standard Equipment details: Sliding carriage with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double cradle milling unit Swiveling, made of cast iron Fixing points directly on the table, thus optimal running smoothness Milling spindle mounted far up on precision ball bearings, thus low bearing load and longest possible service life Powerful industrial motors Milling stop Heavy-duty professional version The high-quality milling fence made of cast iron is supplied with fine adjustment as standard 3-fold positionable for quick return of the setting With fine adjustment via toothed rack, numerical display and aluminum milling stop jaws Rip fence With fine adjustment and quick clamping Sturdy round bar guide made of ground steel Conveniently folds down for cutting large workpieces Reversible aluminum ruler for narrow workpieces Cast iron double weigh saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, mounted on both sides Height and up to 45° inclination adjustable Scoring unit with separate scoring motor 0.55 kW as standard Boom with angle-adjustable telescopic crosscut fence with degree raster graduation Dimensions and weights weight approx. 900 kg Connection dust extraction diameter of dust extraction nozzle 3 x 120 mm Suction port diameter saw blade guard 80 mm Drive power scoring motor 0,55 kW main motor 2 x 5,0 kW Electrical data Supply voltage 400 V Format sliding carriage and table Width of sliding table 360 mm height of sliding table 142 mm Table length 1380 mm table width 465 mm Milling spindle spindle inclination 0 - -45 ° useful length of spindle 125 mm spindle speeds 3500/6000/8000/10000 min-¹ Milling tool diameter max. lowerable 240 mm tenon milling 320 mm Circular saw unit and scoring unit trimming length 3200 mm Cutting width with rip fence 900 mm Max. Trimming width to the left of the saw blade 3300 mm saw blade inclination 90 - 45 °. Max. Cutting height 90° 104 mm Max. Cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four großdimensonierten screws ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Ksdpfx Asd Hx Hnsb Uedw Planer blades change in seconds Self arretierend Particularly low noise Thickness table adjustment at 41 S elite s through a Handwheel with numeric display for the planing height (exactly 1/10 mm) Dimensions and weights Length approx. 900 mm Width/height 1070 mm Weight approx. 361 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 5 main motor kW Installation information Space length 1070 mm Space width/depth 900 mm Space height 1100 mm

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Kdjdpfx Aodqzh Rob Uow Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Aluminium milling stop baking Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Suction nozzle diameter 2 x 120 mm

Condition: as good as new (ex-display), Year of construction: 2025, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed Kdjdpegf Sw Njfx Ab Uew - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Kdjdpfx Abjd Hx Hps Uow Equipment details: Work table Stored on four large screws, ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Motor thickness table height adjustment at 52 S elite s Height adjustment of the Thicknesser table motor with electronic number For greater precision and more ease of use Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight 455 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 7 main motor kW Installation information Space length 1440 mm Space potatoes