Used Scm Nova for sale (654)

Condition: ready for operation (used), Year of construction: 2023, overall weight: 623 kg, Panel saw manufactured in 2023. This SCM NOVA SI 30 features a maximum main blade diameter of 315 mm and a cutting height of 100 mm at 90°. It offers a rip capacity of 1000 mm to 1270 mm, depending on configuration. If you are looking to get high-quality cutting capabilities, consider the SCM NOVA SI 30 machine we have for sale. Contact us for further details. • Max. main blade diameter: 315 mm • Max. cutting height at 90°: 100 mm • Max. cutting height at 45°: 70 mm • Blade tilting: 90°–45° • Rip capacity (parallel fence): 1000–1270 mm (depending on configuration) • Voltage: 400 V (three-phase) Crjdez Sqpvspfx Aktoi • Frequency: 50 Hz • Nominal current: 12 A

Condition: used, Year of construction: 2022, Panel saw Manufacturer: SCM Type: NOVA 400 Codpfo Adr Hlox Aktjri Year of manufacture: 2022 Technical data Length of sliding table: 3200 mm Maximum saw blade diameter: 400 mm Power supply: 400 V Machine weight: approx. 718 kg Equipment Sliding table made of aluminum Machine start buttons on the sliding table Parallel fence with digital position display Scoring device for clean cuts in composite panels Cross-cutting fence with stops for repeatable cuts Rip fence with position lock Upper saw blade guard on an independent support arm Extension table for large panels Adjustable saw blade height and tilt angle Control panel with emergency stop button Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle diameter: 40 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, input voltage: 400 V, number of spindles: 5, table width: 230 mm, Equipment: motor brake, The machine was installed at the plant in 2024. The planer was purchased by us as new and installed at the plant in January 2024. Due to a change in the technological requirements of our production, it was replaced with a different model. The reason for the sale is a change in the plant’s needs. The machine is in very good technical condition and ready for operation. Codpfx Akez Rz Hvetori

Condition: excellent (used), Year of construction: 2022, Tilting Spindle Moulder Manufacturer: SCM Model: NOVA TI 105 Cjdpfxoy Sg Nce Aktjri Year of manufacture: 2022 Table size: 254 x 85 cm Power: 7 kW Tilting: Single-sided 45° Height adjustment: 120 mm Spindle diameter: 30 mm Height and angle adjustment: Electric Left/right rotation: Yes Speeds: 3500/6000/8000/10000 rpm Motor brake: Yes Including feeder

Condition: excellent (used), SCM nova fs410 thicknesser planer Cedpoz Epcgefx Aktjri Planing width: 410mm, 4 knives, 2 feed speeds, Thicknesser table mounted on 4 screws, Manual adjustment of the thicknesser table, Max. planing thickness: 240mm, Length of the planer tables: 220cm, Electric brake, Adjustable planer fence, 7KW motor, Machine inspected, very good condition, Weight: approximately 550kg.

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,330 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, overall weight: 670 kg, Equipment: CE marking, saw blade guard, – Italian production – year of manufacture: 2012 TECHNICAL SPECIFICATIONS: – carriage length: 3200 mm – cutting width on the right: 1330 mm – saw blade diameter: min. 250 mm, max. 315 mm – scorer blade diameter: 120 mm – main motor: 5.5 kW Crsdpfxjyxph Us Aktsi – scorer motor: 0.75 kW – brake – main saw spindle diameter: 30 mm – scorer spindle diameter: 20 mm – cutting height adjustment – cutting angle adjustment: 0° - 45° – max. cutting height: 100 mm – two latches – movable guard – extraction nozzle diameter: 80 and 120 mm – dimensions (L/W/H): 340 / 220 / 170 cm – weight: ~ 670 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 2.21 kW (3.00 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,270 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,700 rpm, total length: 3,200 mm, total width: 5,155 mm, total height: 1,550 mm, overall weight: 691 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Year of manufacture: 2022 9 kW motor Scoring unit Csdpsy Shx Sofx Aktjri Panel processing up to 3.2 m length Squaring fence with 2 digital readouts Parallel fence with 1 digital readout Excellent condition

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Left vertical spindle - working height: 130 mm - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter Cjdszzx Iyepfx Akteri - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Sale of professional woodworking machines

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 520 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,250 mm, total width: 880 mm, Equipment: CE marking, documentation/manual, All SCM machines are available – we will be happy to provide you with a quote. Technical data SCM FS 520 Nova: Total length of tables: 2250 mm Working width: 520 mm Max. material removal: 5 mm Dimensions of thicknessing table: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Planer cutter diameter/planer knives: 120 mm/4 HSS knives Speed: 5000 1/min Self-braking motor: 400 V/50 Hz/S6 - 40 % 7.0 kW Dust extraction port diameter: 1 x 120 mm Weight: approx. 650 kg Credpjz H N Ilsfx Aktei Long surfacing tables (2250 mm) made in one piece enable easy surfacing of workpieces. - Work tables are made of cast iron, annealed and stress-free, making them resistant and permanently flat. - Simultaneous opening and closing of the surfacing tables with a single locking mechanism. - Powerful industrial motor. - Fixed dust extraction hood. - Robust steel/cast iron construction. - Large surfacing fence 1200 x 150 mm. - Material feed with four speeds via a separate motor. - Thicknessing table is raised on 4 robust columns, which are protected by dust bellows. - Helical infeed roller on thicknesser unit. - Rubber outfeed roller at the outlet of the thicknesser unit. - Preparation for long-hole milling unit. - Digital display for thickness setting (1/10 mm). - Automatic star-delta switchover.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: AB00041292, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 950 kg, Equipment: CE marking, documentation/manual, saw blade guard, Circular saw with a tilting saw blade, compliant with European safety standards and equipped with a motor braking system. Features: Crjdpfez Rmu Ejx Aktji Independently driven scoring unit Ready 3 UP Plus version (3 axes), suitable for CE and USA/Canada Sliding carriage of 3200 mm Miter gauge with digital display of the position of the 2 stops

Condition: excellent (used), Table length: 320 cm Cutting height: 9 cm Cjdpfxjzykwko Aktjri Motor power: 7.5 kW

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, rotational speed (max.): 18,000 rpm, workpiece width (max.): 410 mm, workpiece height (max.): 120 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Csdpfjxw U Nxsx Akteri TECHNICAL DETAILS Maximum workpiece width: 410 mm Maximum cutting height: 120 mm Maximum speed: 18,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 4 kW Saw spindle: bottom EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2002, power: 11.03 kW (15.00 HP), workpiece height (max.): 170 mm, input voltage: 400 V, workpiece width (max.): 950 mm, Wide belt sander SCM Sandya 3 RTC wide-belt sander. A reliable and easy-to-use wide-belt sander. Equipped with 2 sanding belts, a combination unit, a roller, and a sanding pad. ✔ Compact & efficient – ​​Takes up minimal space while delivering maximum results. ✔ User-friendly – ​​Clear control panel on the front for smooth operation. ✔ Versatile sanding – Perfect for sheet materials, solid wood, veneer, and much more. Working width: 950 mm Working height: 4–170 mm Sanding belt width: 970 mm Main motor: 15 hp with automatic star-delta (Y/Δ) starter 2 feed speeds: 4.5/9 m/min Automatic centering of the feed belt Automatic setting of processing thickness with digital readout Credpfx Ao Ah Txajktei Calibrated and in perfect working order. Transport throughout Europe can be arranged at a good price.

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Working Table: Flat table Credpfx Akjzq Ur Tjtji Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18

Condition: new, Year of construction: 2022, Swivel spindle 0° - 45° Height and swivel adjustment via handwheel Dial indicators in the handwheel Motor power 7.0 kW 4 speeds 30mm milling spindle Aluminum clamping jaws Milling fence with crank adjustment Crsdsipv A Tjpfx Aktoi Long cast iron tables Safety rulers

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, operating hours: 30,600 h, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, workpiece length (max.): 2,900 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 110 mm, number of slots in tool magazine: 8, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 2,900 kg, table length: 2,700 mm, table width: 1,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It has a working area of 2700 x 1200 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking for high-quality CNC processing capabilities, Programmable speeds: X 25 m/min / Y 30 m/min / Z 22.5 m/min Vector speed: 40 m/min Drilling unit: 16 spindles, 4000 rpm, 2.2 kW (10 vertical + 6 horizontal) Codpj Ahukijfx Aktsri Main spindle: HSK-63 Tool magazine: FAST CHANGE 4 POSITION Tool magazine: BACK CHANGE 4 POSITION Machine Height: 2680 mm Machine Length: 5570 mm Machine Weight: 2900 kg Machine Width: 2500 mm Number of Axes: 3 Spindle Power: 6.6 kW Spindle Speed: 18000 RPM X-axis Travel: 2980 mm Y-axis Travel: 1280 mm Z-axis Travel: 200 mm

Condition: like new (used), Year of construction: 2006, functionality: fully functional, cutting height (max.): 120 mm, milling spindle length: 140 mm, cutting width (max.): 230 mm, overall weight: 1,421 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, type of input current: three-phase, Strugarka czterostronna SCM COMPACT P z 2006 roku, wyprodukowana we Włoszech. Maszyna przeznaczona do strugania, kalibrowania oraz profilowania elementów z drewna litego. Obróbka czterech stron w jednym przejściu sprawdzi się przy produkcji listew, kantówek i elementów stolarskich. Solidny stalowy korpus, długi stół podawczy oraz zamknięta obudowa strefy obróbczej. PARAMETRY TECHNICZNE: – szerokość robocza: 25–230 mm, – wysokość robocza: 6–120 mm, – minimalna długość elementu: 450 mm, – 4 wrzeciona: dolne, prawe, lewe i górne, – prędkość obrotowa wrzecion: 6 000 obr./min, – średnica wrzecion: 40 mm, – prędkość posuwu: 6–12 m/min, – długość stołu podawczego: 2 000 mm, – średnica rolek posuwowych: 140 mm, – długość robocza wrzecion pionowych: 140 mm, – długość robocza wrzecion poziomych: 250 mm, – głębokość profilowania na wrzecionach pionowych: do 20 mm. MOCE SILNIKÓW WEDŁUG KATALOGU: Crsdpfx Akj Ahgkhstsi – dolny wał strugający: 4 kW, – wrzeciona pionowe: 5,5 kW, – górne wrzeciono poziome: 4 kW, – posuw: 0,75 kW. DANE TEGO EGZEMPLARZA Z TABLICZKI: – rok produkcji: 2006, – numer seryjny: AB/180894, – masa: 1 421 kg, – zasilanie: 400 V, trójfazowe, – częstotliwość: 50 Hz, – prąd znamionowy: 46 A, – oznaczenie CE. WYPOSAŻENIE: – stół podawczy z prowadnicą wzdłużną, – obudowa ochronna z oknem kontrolnym, – panel sterowania, – wyłącznik awaryjny, – manometry i regulatory ciśnienia, – wskaźniki położenia przy regulacji, – króćce do podłączenia odciągu.

Condition: used, machine/vehicle number: 008704, Overall length: 3435 mm Overall width: 1100 mm Cjdjzq Uryepfx Akteri Suction capacity: 5750 m3/h No of Filter sleeves: 60

Condition: as good as new (ex-display), functionality: fully functional, TECHNICAL DATA: Technical characteristics NOVA F 520 Working width [mm] 520 Total length of tables [mm] 2750 Input table length [mm] 1550 Output table length [mm] 1200 Knife shaft diameter [mm] 120 Shaft speed rpm 5000 Knife dimensions (4 pcs) [mm] 35 x 3 x 520 Aluminum planer guide [mm] 1200 x 190 Planer guide inclination ° 90 - 45 Working table height from the floor [mm] 845 Exhaust connection diameter [mm] 120 Max. Removal [mm] 8 Engine power kW (HP) 5 (7) ----- Crsdoqw Uyfopfx Aktei Additional built-in options: * Spiral head "XYLENT"

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 1,600 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, SCM Group -STEFANI: 4-sided edgebander complete machine line (2x double-sided edgebanders with vacuum loading, turning unit, drilling and vacuum unloading,) Cjdpj Afbuhofx Akteri 1. SCG - Vacuum feeder with roller conveyor 2. STEFANI Evolution SSB - double-sided edgebander 3. MAHROS - part turning unit (turning parts by 90°) 4. STEFANI Evolution SSB - double-sided edgebander 5. BIESSE - drilling machine 6. SCG - Vacuum unloading with roller conveyor + including 4x NORDSON units for PUR glue application -All parts/units were made in Italy. -During the operation the machine line was used only with EVA type of glue. The PUR gluing units have not been used and they are in a brand new condition - applicators on the machine and the 4 NORDSON units. -Please, find the technical parameters in the PDF bellow.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AB00029039, feed length X-axis: 3,050 mm, feed length Y-axis: 900 mm, feed length Z-axis: 60 mm, input frequency: 50 Hz, input current: 31 A, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, working width: 900 mm, total width: 2,159 mm, total length: 3,459 mm, total height: 1,500 mm, SCM Startech CN Plus R F23L CNC drilling, grooving and routing centre, manufactured in Italy in 2023. The machine is currently installed in Pejë, Kosovo, and can be inspected under power by prior appointment. Machine identification: - Manufacturer: SCM - Model: Startech CN Plus R F23L - Year of manufacture: 2023 - Serial number: AB00029039 - CE version - Machine weight: 1,383 kg Main equipment: - F23L drilling head - 13 independent vertical drilling spindles: 7 in X and 6 in Y - 10 horizontal drilling spindles: 6 in X and 4 in Y - Drilling motor power: 2.2 kW - Drilling spindle speed: 4,200 rpm - 5.5 kW vertical electrospindle for routing operations - Electrospindle speed: 1,000–18,000 rpm - ER32 collet with manual tool change - Maximum routing tool diameter: 20 mm - Integrated grooving saw in the X direction - Maximum saw blade diameter: 125 mm - Saw blade speed: 5,500 rpm - Automatic workpiece positioning and side alignment - Centralised lubrication system - SCM Maestro CNC software with Hicam machine interface - PC control with 19-inch display - Barcode program support - Uninterruptible power supply unit (UPS) - Additional Maestro CNC hardware key Working capacity: - Maximum panel dimensions: 3,050 × 900 × 60 mm - Minimum panel dimensions: 200 × 80 × 10 mm - Maximum axis speed X/Y/Z: 40/40/10 m/min - Maximum vertical drilling depth: 30 mm Installation data: Cedpfx Ako Afnhhjtsri - Electrical supply: 400 V, 3+N, 50 Hz - Input current: 31 A - Installed power: 20.7 kVA - Compressed-air consumption: 50 Nl/min The machine is used, fully functional and available for demonstration under power. Availability: by arrangement. Sale basis: EXW Pejë, Kosovo. Dismantling, loading and transport can be arranged separately. Further technical information, documentation and an operating video are available on request.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: AA1/014223, functionality: fully functional, input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,970 mm, travel distance Y-axis: 1,725 mm, travel distance Z-axis: 340 mm, workpiece length (max.): 2,690 mm, workpiece width (max.): 1,240 mm, number of axes: 3, number of slots in tool magazine: 8, controller manufacturer: ESA GV - XILOS PLUS, actuation type: electric, total height: 2,897 mm, total length: 3,800 mm, total width: 2,400 mm, overall weight: 2,600 kg, table length: 2,740 mm, table width: 1,255 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, SCM Pratix 48 NST CNC machining centre for drilling and routing, year 2004, from the closure of a small, artisanal woodworking shop (no heavy industrial shift production). Machine in excellent condition, stored indoors, inspected and serviced by an official SCM technician. TECHNICAL SPECIFICATIONS: Working area: X = 2,690 mm | Y = 1,240 mm Axis travels: X = 2,970 mm | Y = 1,725 mm | Z = 340 mm Workpiece clearance: 200 mm Multifunctional grooved aluminium table with integrated vacuum channels (vacuum hole pitch 120 mm, groove pitch 40 mm) Pneumatic pop-up reference stops controlled by CNC SCM Power 2000 electrospindle 7.5 kW (10 HP), HSK 63F tool connection, rotation speed up to 18,000 RPM Automatic rear tool changer: Rapid, 8 positions F9 boring unit: 5 independent vertical spindles + 4 horizontal spindles (1+1 in X and 1+1 in Y) Upgraded 250 m³/h vacuum pump mounted on a mobile trolley CNC control unit: PC-Office running Windows XP with SCM Xilog Plus software interface INCLUDED ACCESSORIES & TOOLING: Original SCM right-angle attachment head with 2 horizontal outlets (for router bits with ER32 collet or saw blade up to Ø 160 mm), 360° manually adjustable Set of HSK 63F tool holders, ER32 clamping nuts, and service wrenches Extensive set of professional OMAS profile cutters and tooling for doors, windows, and solid wood joinery Modulset modular vacuum template clamping elements (H=20 mm) Original SCM user & maintenance manuals, electrical/pneumatic schematics, and original CE Declaration of Conformity TERMS OF SALE & DELIVERY: Delivery terms: Ex Works (EXW). Crods Af Ig Ujpfx Aktji Dismantling, packing, loading, and transportation are entirely the buyer's responsibility and at their expense. The machine is installed and can be inspected on site under power by agreement. PLEASE NOTE: Machine fully inspected, software/hardware reset, and functionally tested by an official SCM service technician, with an official service report and complete system backup available.

Condition: new, Technical data: Max saw diameter: 400 mm Crjdpfx Akov S Uz Iotoi Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: excellent (used), Year of construction: 2017, operating hours: 14,388 h, input voltage: 400 V, input current: 10,000 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 4,150 kg, Equipment: CE marking, SCM Morbidelli M100 2017 in Very good condition. Esecuzione a norme C.E. 1 morbidelli m100 3115x1320 Z180 1 Voltage 400 EU 1 Frequency 50 Hz 1 PRO-SPACE Safety System 1 TECPAD Wired Remote Control with 7" Touch-Screen Colour Disp 1 TRB11 linear tool changer (Y=1320 versions) 1 FAST14 linear tool changer 1 Air blower on electrospindle 1 Cede Ahpawspfx Aktsri No. 1 vacuum pump 250/300 m³/h 50/60 Hz 1 Centralized optimized air coveyor on rear head 1 Drilling head with vertical pneumatic positioning (single Z- 1 F23L drilling head 1 Dust extraction hood for drilling head 1 Drilling unit managed by inverter 1 Device to increase the drilling pressure along Z axis 1 5-axis unit, "JQX" version 10 kW 1 Exhaust outlet for 5-axis electrospindle 1 Liquid cooling group (air type) 1 N.6 rails "TV FLEX" - 1300 1 Laser positioning device 1 N.4 lifting devices H=75 - 1300 1 Fixed pod 145x145 H=75 mm 12 Rotating pod 145x55 H=75 mm 12 MAESTRO ACTIVE Human-Machine interface software (HMI) 1 Maestro lab programming software 1 Hardware key for Maestro 1 Additional key for Maestro (USB port) 1 "eye-M PRIME" mobile console 1 TELESOLVE teleservice via Internet 1 Cables length of the mobile control panel 6,5 meters 1 S-N-D 3-positions selector 1

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Crsdpfx Aoz Iyvpektji