Sliding table saw

SCM nova si 400

Condition: used, Year of construction: 2010, Carriage length: 3200 mm Cutting width at the width stop: 1250 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 150 mm Scorer: Yes Saw blade height adjustment: electric / position control Swivel adjustment saw blade: electric / position control Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: Digital Gsdjvadx Espfx Ag Tstt Width stop display: Digital Cutting ruler display: Digital Saw blade diameter: 400mm Speeds: 3 Motor power: 5.5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3500mm Machine width: 2200mm weight: 1000kg

Condition: used, AD planer Minimax 400, very good condition, 410 mm table width, 4 knives, 2600 mm table length Gedpfowzzdyox Ag Tstt Price changes reserved, errors, misprints and typographical mistakes excepted.

Condition: new, Basic equipment and accessories10-year guarantee on the guide system of the saw carriage- Saw carriage with anodized aluminum profile guide made of hardened,ground and flanged steel guides- Saw carriage length 3200mm- "READY" electronic control, 2-axis control (3rd axis onrequest) with:- Height adjustment and inclination of the saw unit (control of therip fence on request)- Management of the tool data with automatic correction of theCutting height in relation to the angle of inclination of the saw blade- Manual, semi-automatic and automatic mode with 99storable work programs- Additional functions: calculator and hour meter- Trimming frame for quick positioning of the stopmiter cuts- Table extensions in the outlet- Cutting length at the rip fence 1270 mm- 2-axis control with 99 programsMotor 7kW 50Hz (8kW 60Hz)- Motor with direct connection with push buttons- Three main saw blade speeds- Scoring unit with independent motorization, externally adjustable andStops for easy saw blade positioningSecurity/Protection- Emergency stop button on the front- Emergency stop button on the side near the rip fence (Version CE)- Thermal protection switch- Saw blade swing protection (version CE) integrated suction, suction nozzlewith a diameter of 80 mm- Saw blade swing protection with integrated suction, suction nozzle with 80 mmdiameter- Automatic motor brake on the main saw blade (CE version)- Lockable main switch- 110 V auxiliary circuit- CE Declaration of Conformity (CE version)Technical specificationsMax cutting height at 90° (mm) 140 with blade 400Max cutting height at 45° (mm) 97 with blade 400Saw blade tilt (degrees) 45Programmed lifting and swiveling of the saw blade unitSaw blade speed (rpm) 3000- 4000- 5000Scorer speed (rpm) 8500Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5)Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7)Format cuts:- with trolley 1600 (mm) n.a.- with trolley 3200 (mm) 3200x3200Cutting width for parallel cuts (mm) 1270Suction nozzle diameter:- on frame (mm) 120- on the saw blade guard (mm) 80- on the riving knife (mm) n.a.Net weight base machine (kg) 1050109999 Execution according to safety regulationsR10078 nova si 400ep CE version930731 volts 400 EU931201 Frequency 50 Hz570343 Digital readout for rip fenceComplete with:- Digital display and magnetic tape570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60)083202 base109993 MACHINE LANGUAGE: German Gtedpfxsvxr Sko Ag Tst

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper Gjdpfxexymd Ts Ag Tstt - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Godpfexl Dw Uox Ag Tott Scorer motor for panel saw

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Gtsdpfxopq If Dj Ag Tjt Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, functionality: fully functional, feed rate X-axis: 9 m/min, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, warranty duration: 12 months, HOLZ-HER Edgebander ARTEA 1020 Gtjdpfxoxpgv Uo Ag Tet Stock machine – Subject to prior sale Year of manufacture: 2024 - Base machine 1020 - Edge Control BC15 with Vi.Se. (Visual Setting) - LED machine lighting - Jointing milling unit - GluJet for PUR / EVA including adhesive reservoir - Milling - Profile scraper - Surface scraper - Buffing unit

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Gjdpju R Sx Ejfx Ag Tstt Weight: 450 kg - new exhibition machine -

Condition: used, Compact edgebanding machine Hebrock EURO 3001 for precise edging of panel material with edge bands. The machine enables clean edge processing through automatic glue application, pressing rollers and post-processing aggregates. Ideal for furniture and interior construction. Technical data subject to change. Gjdpsxdc D Refx Ag Tett Unit 1: Glue application Unit 2: caps Unit 3: Flush milling workpiece height: approx. 10 – 40 mm edge thickness: max. approx. 12 mm feed rate: approx. 10 m/min

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Technical specifications: Main saw blade diameter (mm): 550 Gtodpfoxavrgsx Ag Tot Panel cutting with pull-out fence and sliding table 3200 mm: 3200x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extraction port diameter: - on frame: 120 mm - on saw blade guard: 100 mm Main motor power [S6 -40%] Hz50 kW: 7 Scoring blade motor power [S6 -40%] Hz50 kW: 9 Cutting width at rip fence (mm): 1000 Standard equipment and accessories: - Optimizer/processing control app for tablets: SCM Thundercut The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android. It can be activated using the QR code supplied with the machine. The app enables you to: * Manage the machinery fleet and materials or panel stock * Create and edit projects, import projects from main furniture design software (file format "cpout"), and import cutting lists * Optimize cutting lists by selecting one or more proposals from the app’s integrated optimization software * Properly set up the machine for each cut, thanks to the simple and intuitive graphics of the 3D sequencer that guide the operator through every step * Print barcode labels for marking different parts via Bluetooth with compatible label printers - 10-year warranty on the sliding carriage system - Maximum saw blade diameter: * Up to 450 mm with scoring saw blade mounted * Up to 550 mm without scoring saw blade - eye-S 15" electronic control system including: * 15" touchscreen monitor * Direct control of the following axes in manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilt adjustment - Rip fence adjustment - Scoring blade height and lateral adjustment (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for complex cutting operations * Storage capability for up to 1000 programs with corresponding images * Storage for up to 1000 different tools with corresponding images * Cutting sequence management for preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic acquisition of working dimensions from the Thundercut App * USB port * Prepared for network connection - Auxiliary function of the electronic control system, including: * Determination of the correct stop position on the longitudinal fence for panel machining with tilted saw blade * Determination of the correct stop position on the longitudinal fence for angle cuts with the mitre fence on the work table with or without tilted saw blade - Swivelling control panel above table