Used Scm Si 400 Ep Class for sale (595)

Condition: used, working area 2.600 x 1.250 mm spindle drive 7,5 kW feed max. 38 m/min x-axis 2.700 mm y-axis 1.600 mm z-axis 250 mm SCM Routech R 3000 CNC machining center for processing sheet material with automatic feeding (vacuum destacker) and discharge. Hsdpfxon A Dwge Ag Ioi Video: Upon request Special price for self-disassembly and self-collection.

Condition: excellent (used), SCM F3A jointer planing machine - Planing width: 300mm - Table length: 2100mm - Three-knife cutterhead - Weight: 290kg Hjdpfjwzyuqox Ag Ioi - Fence tiltable up to 45° - 3HP motor - 380 Volt

Condition: used, Year of construction: 1999, Table dimensions 1200x730 mm Motor output 5,5 kW Spindle diameter 30 mm reus 3000-4500-6000-7000-10000 U/min Weight 810 kg Hodpfx Agoxq Hiwj Ioi

Condition: excellent (used), Four-side planer / four-sided moulding machine Compact 23 Max. working width 230 mm Max. working height 125 mm Max. profile tool diameter 180 mm Hjdpfst Dk Rxjx Ag Iji Surfacing spindle 4 kW Vertical spindle 5.5 kW Upper horizontal spindle 4 kW Lower horizontal spindle 4 kW Machine dimensions 3200 x 1400 x 1600 mm, Weight 1850 kg

Condition: ready for operation (used), working width 950 mm calibrating unit with metallic roller combination unit with rubber roller and automatically engaged shoe star-delta start pneumatic oscillation controlled by photocells two conveyor feed speeds Hodpfx Agjynh Sce Iei motor power 11 kW year of manufacture 2000 power supply 400V weight 975 kg

Condition: excellent (used), SCM K560 R HP Edge Bander Liquids Pre-milling cutters, Glue application by roller, Interchangeable glue tank Equipped with glue drain Pneumatic pre-cut guillotine, Trimming saws angle-adjustable for final cut Hedjymdgajpfx Ag Isi Liquids Top/bottom milling unit (multi-cutter R1-R2), Double corner rounding unit, Profile scraper (multi R1-R2), Cleaning liquids Flat scraper, Polishing unit, The machine features NC control Max workpiece height: 60mm Max edge thickness from roll: 3mm Feed speed max 18 m/min without rounding, 12 m/min with corner rounding Machine in very good condition. Original total run: 20,000 meters

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DAILY WORKING IN THE PRODUCTION max 2-3 hours , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE Hjdpsym Sguefx Ag Isi MACHINE IS AVAILABLE IMMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WORKING STATIONS: TECHNICAL DATA: 1. Left+right cutter 2. Roller glue application 3. Front and rear saw 4. Straight cutter also for solid laminates 5. ⁠Angle cutter 6. ⁠Rondomat front, rear, top, bottom 7. ⁠Straight wedge cutter 8. ⁠Wedge cutter with radius 9. ⁠ Dryer WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS MACHINE LENGHT APPROX 7 METERS WEIGHT : 3500 KG

Condition: good (used), Code: 0292 Brand: SCM MINIMAX Model: FORMULA F1 - CE Standard Surface planer for planing wood materials, plastics, composite materials and various - CE Standard Technical data: Hsdpfx Ajyhp S Rjg Isi Working width mm 410 Table length mm 2610 N° 4 knives Shaft diameter mm 120 Shaft rotation speed rpm 5000 Guide tilting from 90° to 45° Max stock removal mm 8 Motor power Hp 5,5 Table height from ground mm 845 Suction hood diameter mm 120 Overall dimensions mm 2610 x 900 x 1070 h Weight kg 575

Condition: excellent (used), functionality: fully functional, SCM Sandya 3 wide belt sander Working width 950 mm Number of units 2: 1 unit with steel shaft 2 combi unit - rubber shaft + shoe Shoe automatically fitted Oscillation on photocells 2 conveyor belt speeds Belt feed speed 4.5/9 m/min. Motor power 7.5 KW Hedpoyiacgofx Ag Iei Paper size 1900×970 mm

Condition: excellent (used), Wide Belt Sander SCM Sandya 30 RT Working width: 1100 mm Working height: 3–160 mm Number of units: 2 Calibration drum Unit with segmented shoe Motor power: 1. 15 kW 2. 11 kW Hjdpfeyh N Icjx Ag Iji Optical oscillation Abrasive belt dimensions: 2620x1115 mm

Condition: good (used), Year of construction: 2008, power: 5.5 kW (7.48 HP), planing width: 410 mm, SCM FS 410 Planer & Thicknesser – Year 2008 – 410 mm – 5.5 kW Description: For sale is an SCM FS 410 combined planer and thicknesser from the year 2008. This machine is robustly constructed, powerful, and ideally suited for professional woodworking as well as ambitious workshops. Features & Data: + Combined planer/thicknesser Hsdpfx Agoylmdlo Iji + Planing width: 410 mm + Motor power: 5.5 kW + 2 feed rollers on the thicknessing table for consistent material feed + Electric height adjustment at the push of a button + Numerical height display plus additional mechanical scale + Solid SCM industrial quality Condition: Used, well-maintained, lubricated, and fully operational. Normal signs of use. Inspection and test run possible by arrangement. Price: Negotiable €5,600 net Location: 39340 Haldensleben Shipping: Possible by freight carrier

Condition: used, Year of construction: 2001, Type Record 121 Number of working axes 3+ Useful working area axis X-Y-Z 2600-1080-250 mm Table dimensions 2600 x 1080mm Spindle speed 900 - 18000 rpm Number of milling spindles: 1 Tool change positions: 12 Tool clamping system HSK63F Work table Matrix table The main engine is 7.5 kw Vacuum pump performance 250/300 m3/h Hedpfx Aev Dtibjg Isi Vacuum motor 6.5 kw The diameter of the extraction socket is 150 mm Air pressure 7 bar Voltage 380V/50HZ Transport dimensions 3700x3200x2600mm Weight 3500 kg The price is 15500 Eur

Condition: used, Year of construction: 2005, functionality: fully functional, length stop: 3,200 mm, tool diameter: 400 mm, spindle diameter: 50 mm, spindle stroke: 640 mm, spindle speed (max.): 3,000 rpm, milling spindle length: 320 mm, saw blade diameter: 400 mm, height adjustment type: electric, type of input current: AC, working height: 130 mm, working width: 200 mm, SCM Windor 60/100 – Angle Processing Center Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The system in question is a window and door production line of the type Windor 60/100 from the manufacturer SCM Group, built in 2005. It is a CNC-controlled angle processing center designed for the industrial machining of frame and sash components. The system is configured for series production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angle Processing Center The SCM Windor 60/100 features a modular design and is configured as an angle processing unit. Machining takes place on a tenoning side and a profiling side positioned at right angles to each other. The system combines several machining steps – such as milling, drilling, grooving, rebating, and tenoning – in a fully integrated, CNC-controlled process. Key Features: * CNC multi-sided machining * Multiple milling and processing spindles * Automated tool handling and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Center The Fleximat drilling center is integrated into the system and is used for the precise execution of boreholes for joints and fittings. Machining is CNC-controlled with both vertical and horizontal drilling units. 2.3 Profiler Center The profiler center is designed for contour-forming milling operations and consists of two processing sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour processing Left side: Hedox Nqqxopfx Ag Iei * 24-position tool changer * Automatic tool changing to minimize setup times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding, serving to improve the surface quality of the processed workpieces. 3. Control, Operation, and Safety The system is equipped with a CNC control unit that manages all machining operations, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained personnel. The safety features are state-of-the-art as of the time of construction (2005) and include, in particular: * Mechanical guards and enclosures * Emergency stop devices * Safety locks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, provision has been made for a SCM Topset XL planer with 10 spindles. This machine will be operated as a standalone processing station at a separate location within the production hall and is not directly integrated into the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transportation are to be organized by the buyer. Available from 07.01.2026

Condition: used, Year of construction: 2008, functionality: fully functional, Well-maintained and refurbished SCM OLIMPIC K203 edgebander available in our warehouse. The machine is in very good working condition and ready for immediate operation. Machine equipment: DIA pre-milling cutters Hodpfxsyl Tvzo Ag Ioi Pair of end trimming units Pair of rough straight milling cutters Rounding unit (Rondomat) – 2 motors Radius scrapers Buffing brushes The machine is fully equipped and ready for production.

Condition: excellent (used), Year of construction: 2004, TECHNICAL DATA : Hedpfxsykch Do Ag Ioi Planing width 230 mm Planing height 120 mm Infeed table : 2000 mm Infeed speed : 2 - 25 mtr/min ( 1,1 Kw ) Spindle configuration : 1) horizontal, lower 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2nd and 3rd spindle) 11 kW( Digital adjusteble ) 4) horizontal, top 230 mm 7.5 kW ( Digital adjusteble ) 5) Horisontal lower, 4 Kw all spindles up / down, right / left Spindle diameter 40 mm From the top 3 introducing rollers, metal, torsion, including 2 double Top pulling roller, double rubber Pressure 1 pc on the side A rubber pulling roller in the lower table top, before outfeed Central lubrication Measures : L 3850 x W 1200 x H 1600 mm, weight : 1957 Kg.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, planing width: 630 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,500 rpm, total width: 1,200 mm, total height: 1,100 mm, overall weight: 1,050 kg, working width: 630 mm, spindle diameter: 120 mm, workpiece width (max.): 630 mm, workpiece height (max.): 300 mm, height adjustment type: electric, number of feed rollers: 2, planing height: 300 mm, working height: 300 mm, Equipment: CE marking, documentation/manual, SCM SP2 S63 Thickness Planer | 630 Planer | Planing Height 300mm | LIKE NEW! THICKNESS PLANER FROM ITALIAN BRAND SCM Hjdpfx Agjxwd R Ss Isi Machine in excellent technical and visual condition, ready for work. The machine operates very quietly. Technical parameters: - cutter block width: 630 mm - maximum planing height: 300 mm - 4-knife TERSA cutter block - spindle speed: 4500 RPM - power: 7.5kW - electric table height adjustment - stepless feed speed adjustment: 5-18 m/min - anti-kickback fingers row - cutter block guard - 2 table rollers Planer dimensions: - length: 1300mm - width: 1200mm - height: 1100mm - weight: ~1050kg Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE LUBELSKIE, POLAND Possibility to test the machine on site Machine financing available via leasing or installments. WE ORGANIZE TRANSPORT jbsmaszyny.pl tel: 664 335 465 tel: 530 632 386

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable Hodpfexqggcox Ag Iji 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! Hedpfx Ajtwzyfeg Iji - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate Hsdpoitvkujfx Ag Iji "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: new, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Sanding belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" skew-grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (on/off) for automatic engagement/disengagement of the sanding roller sanding pad unit - Activation of segments via electronic control, which synchronizes their operation with feed speed and manages the number of active segments based on the workpiece geometry, allowing selection of more or fewer segments to the left or right of the workpiece. Versions 135: Hsdpfx Aehtuvreg Iei “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4” display with ‘eye S’ software integration NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Condition: excellent (used), functionality: fully functional, SURFACE PLANER model SCM F 520 second hand machine n.4 knives Tersa Hsdpfx Aswt T Hdsg Isi length of ground surfaces: 3000 mm hydraulic foot pedal lift volts: 380/50 Other models available as shown in the photos second hand machines

Condition: new, SCM gabbiani p90 panel dividing saw - exhibition machine - special price! Technical data: Saw blade projection mm 90 Worktable height mm 950 Number of collets 5 as standard CUTTING DIMENSIONS mm 3300 x 3200 Variable saw carriage speed m/min 6 - 60 Variable pusher speed m/min 0 - 60 Saw blade motor power kW 7.0 Speed rpm 4650 Saw blade diameter mm 340 Saw shaft diameter of main saw blade mm 80 Scoring motor power kW 1.5 Speed rpm 5850 Scoring blade diameter mm 200 Scoring blade shaft diameter mm 80 Compressed air requirement NL/min 300 Compressed air bar 7.0 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Suction nozzle diameter mm 4x120 including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M control panel with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation without "gateway" for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with castors, on the side of the longitudinal stop 590246 Fixed air cushion table 2500x800 mm with castors and reinforced fan 590239 2 x movable air cushion table 1500x600 mm with castors and reinforced fan 590244 Saw carriage with independent stroke control of the saw and scoring saw blade 590245 Optimized vertical stroke of the saw blade on 2 levels (medium/maximum) 590143 Device for grooves with manual height adjustment of the saw blade 590241 Execution of grooves (feed/return of the saw carriage) 590164 Double lateral automatic aligner Hedpfxjiz A Ams Ag Iji 301230 Foot switch for starting and stopping the work cycle 590044 Compact labeling unit - printing of labels with barcode 590144 4 x additional clamps 900088 Magnetic tape monitoring of the pusher position 102015 European safety regulations (CE mark) 109993 MACHINE LANGUAGE: German

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Hjdpjfh Tmmofx Ag Iji Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Hsdpfxjd E Ixzj Ag Iei Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Rusticating machine for wooden artefacts such as boards, profiles, beams and strip wood for flooring, with maximum width 40 or 60 cm x 30 cm high. hight adjustment via hand wheel and numerical read out brush DM 200 mm machine in CE working width 600 mm max. working height 300 mm suction DM 2 x 140 mm motor feeder 0,37 kW feeder speed variabel 3 - 20 m/min motor brushing aggregate each 4,0 kW machine weight approx 750 kg inkl. 1 steel brush DM 200 mm 1 TYNEX brush DM 200 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Hodpfxodd Hi Eo Ag Iei