Used Scm Tech 99 L for sale (594)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Rodpol Hydmsfx Aglen Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Rjdpfxjxlqnte Aglon Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Rsdpfx Agewhi Sljljn Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: good (used), Year of construction: 2010, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: AA2/001307, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 30,000 m/min, feed length X-axis: 6,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 45,000 m/min, feed rate Z-axis: 30,000 m/min, nominal power (apparent): 15 kVA, controller manufacturer: NUM, controller model: 1040, workpiece length (max.): 6,500 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 180 mm, total height: 2,750 mm, total length: 8,000 mm, total width: 4,000 mm, table width: 1,350 mm, table height: 950 mm, table length: 6,500 mm, spindle speed (min.): 24,000 rpm, spindle motor power: 11 W, Working travel of axes X-Y-Z: 6500 x 1350 x 250 mm Working area: 6500 x 1250 mm C-Axis = 640, B-Axis = 270 PRISMA milling unit with 5 interpolating axes X, Y, Z, C, B Electric spindle 11 kW, 600–20,000 rpm Tool holder HSK63 Working table with TVN pads and vacuum cups Cross laser projector on working table TVN vacuum cup Pneumatic clamps Tool magazine for 24 tools Drilling unit Vacuum pump 5.5 kW, 250 m³/h CNC control NUM Rjdpfew Au N Ssx Aglon Operating system: Windows XP Xilog Plus Maestro Weight approx. 5,450 kg

Condition: excellent (used), Four side planer scm compact xl - planing width 23cm - planing height 13cm Redpslat Hdsfx Agljn -electric lifting of the upper head and feed rollers - all spindles adjustable vertically and horizontally - bottom 4kW, right and left from one motor 7.5kw kW, upper 5.5kw universal 5.5kw Machine in very good condition

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: AB/203002, cutting length (max.): 3,200 mm, SECOND-HAND CIRCULAR SAW SCM MOD. SI450 EP CLASS - Carriage mm. 3200 - Motor Hp 10 - Inverter for speeds change - Motirzed scoring unit adjustement - Serial number AB/203002 Rodpfx Agex Runqeljn - Year 2010 (CE)

Condition: new, Year of construction: 2025, Professional long belt sanding machine Electric table height adjustment Quick belt tensioning via lever Upper belt with additional graphite coating Professional sanding shoe 250 mm diameter rollers ensure optimal tracking 2 sanding belt speeds Rjdpjwxrl Nsfx Agljn Reversible motors (right and left rotation) Tiltable sanding shoe adapts to the work surface Fast and easy sanding belt replacement Standard right-left rotation Manufactured in Italy Properly balanced rollers provide optimal belt drive Quick belt tensioning allows for fast and effortless belt changes. Technical data: Working table dimensions: 2500 x 1100 mm Working table height adjustment: 580 mm Cross travel of working table: 620 mm Sanding shoe dimensions: 150 x 360 mm Belt speed: 9 m/s and 18 m/s Motor power 400 V / 50 Hz / S6 - 40%: 4 kW Table height adjustment motor power: 0.45 kW Drive roller diameter: 250 mm Sanding belt dimensions: 7100 x 150 mm Overall dimensions (L x W x H) in mm: 4040 x 1510 x 1510 mm Extraction port diameter: 140 mm Weight: 420 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical specifications: Cast iron table dimensions: 905 x 372 mm Number of spindles: 21 Distance between spindles: 32 mm Maximum distance between spindles: 640 mm Rsdpfexauw Ujx Agljn Maximum horizontal drilling height: 60 mm Maximum tool diameter: ø40 mm Workpiece thickness: 10–85 mm Maximum panel width between arms: 833 mm Maximum drilling head travel: 70 mm Number of clamping holders: 16 Motor power: 400 V / 50 Hz, 1.8 kW (2.5 HP) Motor speed: 2800 min-1 Operating pressure: 5 bar Weight: 320 kg Pneumatic adjustment of the drilling head vertically and horizontally. Drilling head lockable at 0° – 45° – 90° positions. Standard includes 2 pneumatic clamps for workpiece securing. Drilling height adjustable via handwheel with mechanical display. Drilling depth adjustable via 5-position turret stop.

Condition: ready for operation (used), main motor 11 kW Rsdpfjvl Ag Sex Aglsn electric spindle height adjustment spindle diameter 40 mm spindle height 250 mm tool diameter 330 mm side carriage pneumatic clamp feed

Condition: used, functionality: unexamined, Ferwood Code: RS0000797 - Manufacturer Code: 2987540023L - Condition: Used - Functionality: Not tested - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Rsdpfx Asvvad Noglsn

Condition: used, machine/vehicle number: 007186, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Redou T Tuwspfx Aglsn Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Max. forward feed speed: 25 m/min Redpfjw Iddzjx Aglen Operator shafts number: 6

Condition: used, Year of construction: 2015, total length: 2,300 mm, total width: 1,950 mm, total height: 1,850 mm, Empty weight: 1.240 kg Price: On request - Year: 2015 Rodpfexhchdex Agljn - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2008, IDM Level HD is an industrial single-sided edgebanding center designed for edge processing in standard furniture manufacturing. The HD model features a more robust construction, making it suitable wherever consistent edge quality is required at higher feed speeds. This machine enables complete workpiece processing in a single pass—from pre-milling and adhesive application to the final edge refinement. Owing to its modular arrangement of working units, the machine can process ABS/PVC edges as well as veneer. The machine is pre-owned, fully cleaned, inspected, and ready for installation. Technical specification: Rsdsxztmdjpfx Aglon • Pre-milling unit: 2 counter-rotating motors to trim the leading edge before edgebanding • Gluing unit: EVA glue pot, electronic temperature control • Pressure zone: main pressure roller + additional pressure rollers • End trimming saws: 2 motors, clean trimming of edge ends • Top and bottom trimming units: profiling, precise trimming of ABS/PVC edge • Front corner rounding unit: radius machining of panel corners • Rear corner rounding unit: finishing of corners at workpiece outfeed • Radius scrapers: final smoothing of edge radius • Flat scrapers: finishing of edge surfaces • Buffing unit: 2 discs for final polishing of the edge • Complete extraction system: connection points for all working units • Pneumatic pressures and adjustments: secure workpiece hold and precise regulation • Manual fine adjustment: analog readout wheels and micrometric adjustments for precision set-up

Condition: used, Year of construction: 2016, MACHINING CAPACITIES: - Panel height (thickness) to be processed: 8 to 60 mm 10 to 45 mm when using the corner rounding unit - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed (advance speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum dimensions for panel radiusing: Ø x mm - Panel overhang relative to the conveyor belt: - Max spindle cutting depth: mm² - Workpiece gap: mm Roll edging: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Strip edging: - Maximum thickness: 6 mm maximum 3 mm with corner rounding unit - Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounding MACHINE CONFIGURATION: - Unwinding table, usable Ø795 mm - Working table: L 4.15m / H 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge trimming units (2 spindles) 12,000 rpm - Gluing station with interchangeable glue pot, 180-200°C Pneumatic pre-cut guillotine Pressure section with 3 rollers, 1 of which is motorized - End-trimming aggregate with 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying pads - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for settings (type SIKO) OTHER FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 21A - Feed motor: 0.75 kW - Spindle motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Trimming (milling) motors: 2 x 0.55 kW, rpm Rjdpfxjx Dcn No Aglen - Pneumatic supply: 8–10 bar, dry air Required working pressure: 6 bar - Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int. Required volume flow: 1600 m³/h - CE marking, lockable safety switch, emergency stop push buttons Operating dimensions: 4.45 x 1.70 x h.1.80 m Transport dimensions (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Connected load 480V 42kW 108A, extraction connection 5x120 + 2x150 mm, 1x jointer unit, 2x vertical spindle units, 1x thicknessing unit, 1x universal unit top, 1x universal unit bottom, spindle diameter 40 mm, lubricant pump, pneumatically controlled pressure rollers, connection 6 bar, electric bridge adjustment, central lubrication, stepless feed via frequency inverter, total length 4200 mm, depth 2000 mm, height 1700 mm – as returned by customer Rsdpfxsx E T Dms Aglen

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Morbidelli M800 X5 machining center X working field: 6360 Y working field: 1680 Z working field: 350 5-axis electrospindle with liquid cooling, 13 kW – HSK 63F Tool magazine disc moving on X-axis, 48 tool positions Processing unit with Vector 360° axis 1 cutting saw blade 1 vertical outlet for milling 3 vertical outlets for drilling 3 vertical outlets for handle holes 2 horizontal outlets for milling 2 horizontal outlets for drilling CE safety system with bumpers Rjdpfxex I A Aqe Aglsn CNC PC-Office control with integrated computer 3D programming system WOP XILOG-MAESTRO 250 m³/h vacuum pump Available December 2026.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: AE/21582, Operating voltage: 400 V/50 Hz Rated current: 44 A Weight: 4800 kg Year of manufacture: 2001 Panel cutting saw from SCM manufacturer, made for industrial applications Robust design for high productivity and precision Rjdpfx Agot Dva Selon Cutting height/saw top allowance: 115 mm Max panel width: 3200 mm Panel max length: 3200 mm Number of grippers: currently 6 Loading: front

Condition: like new (used), Year of construction: 2000, working width 230mm working height 120mm 6 spindles spindles set: bottom/right/left/top/bottom/uni spindles speed 6000 RPM two axes heads regulation pneumatic pressure of feeding rolls Rjdpfeqffa Njx Agljn variable regulated feeder year 2000

Condition: used, machine/vehicle number: 006487, X axis working area: 3060 mm Y axis working area: 1240 mm Working Table: Flat table Rodon Rzclepfx Aglsn Main Electrospindle power: 8.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Brand: SCM Model: OLIMPIC K 500 T/ER-2 - CE Automatic edge banding machine with sanding unit for wooden, veneer, PVC, melamine, ABS edges – suitable for furniture manufacturing, joinery, custom fittings, panels, kitchens, bathroom furniture, and various other applications Technical specifications: Min./max. panel height: 8–60 mm Panel height with corner rounding unit: 10–45 mm Edge thickness: 0.4–8 mm Edge thickness from coil: 0.4–3 mm Minimum panel width: 55 mm Feed speed: 11 m/min Pressure beam with motorized vertical movement Panel support rail Sound-insulated safety enclosure Fluid inlets Components: Anti-adhesive spraying unit with two nozzles – two tanks for anti-adhesion liquid Pre-milling units with two high-frequency motors – H64 mm diamond tools – diameter 100 mm, bore 30 mm, height 65 mm – copying set Gluing unit VC 560 for edge application on panels up to 60 mm – glue pot capacity: 1.5 kg – exchangeable glue pot End trimming unit with two independent motors, each 0.35 kW at 12,000 rpm – motor tilt from 0° to 15° – 2 saw blades, diameter 115 mm – front copying devices Tilting trimming/bevelling unit for removing top and bottom edge overhang – 2 motors at 0.55 kW – 12,000 rpm – tilt range from 0° to 25° – two-position pneumatic set for quick change between thin or radius edges Corner rounding unit with two motors on prismatic guides – for rounding and trimming thin or thick edges – 2 motors at 0.55 kW – 12,000 rpm Edge scraping unit for optimal finishing of ABS/PVC edges with rotary copying and extraction hood, scrap collection cassette Glue scraping unit – removes glue residues from the lower and upper panel surfaces Buffing unit for cleaning and polishing plastic edges – motor 0.25 kW – brush diameter 150 mm Compressed air: 7 bar Overall dimensions: 5500 x 1150 x 1550 (H) mm Redpfx Aexnvr Asgljn Weight: 1,780 kg Recently serviced New diamond pre-millers New copying wheels...

Condition: used, Technical data: Max planing width: 630 mm Max planing height: 300 mm Cutterhead diameter: 120 mm Number of knives: 4 Number of feed rollers in the table: Feed speed: 5/8/12/18 m/min Electric height adjustment Extraction port: 150 mm Power supply: 400 V Motor power: 7 kW Overall dimensions: Rsdpfx Agexz Dlkjlen Length: 1280 mm Width: 630 mm Height: 1200 mm

Year of construction: 2016, condition: excellent (used), Thickness planer Manufacturer: SCM Type: S52 Elite S Year of construction: 2016 Rsdpepr U D Sefx Agljn Working width: 520 mm Max. Plane thickness: 240 mm Power: 7 kW Feed rate: 5 / 8 /12 /18 m/min Number of knives: 4 Blade type: Tersa Motor brake: Yes Suction nozzle: 120 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: AH/105752, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, control type: PLC-controlled, TECHNICAL DETAILS Panel height: 10–60 mm Solid wood: 15 mm PVC/ABS: 3 mm Feed speed: 12–18 m/min Working height: adjustable via PLC MACHINE DETAILS Redpfx Asxx Nf Doglen Control: PLC EQUIPMENT Adjustable panel support guide Side roller conveyor with idler rollers for panel support Rectifier group Roller holder plate Gluing unit for EVA adhesive with premelter Edge pressing group Trimming group Scribing group with overlapping motors Tiltable copy unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush group

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Rodpfx Aew Npyqegljn Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Clamping system: Clamps Safety: Light barrier Control and software SCM XILOG Minimum footprint: 3920x1170x2150