Used Scm Windor for sale (576)

Year of construction: 1995, condition: good (used), 3 drilling heads with 21 spindles each Kedpfx Absih H Epj Ujdw 1 horizontal 21 spindles 2 vertical 21 spindles pneumatic clamps

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Year 2006. Configuration: 11 KW steel cylinder 11 KW hard rubber cylinder + combi unit soft rubber cylinder + pneumatic jumping pad. Working width 1100mm Pressure rollers for short elements. Kjdpfx Asxtxhkeb Ujdw Air-blow on all units. Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: good (used), Code: 0114 Brand: SCM MINIMAX Model: UNILEV 150 Universal sanding machine for straight and round parts , furniture, window frames , panels, doors, window frames and various Technical data: Lenght of worktables mm 1440 Tilting worktable 0-45° Motor 3,3 Kw Sanding belt width mm 150 Sanding belt lenght mm 2170 Pneumatically controlled oscillating belt Suction port diameter mm 120 Overall dimensions: mm 1440 x 720 x 1550 h Kdedpfxewh Uaus Ab Uow Weight kg 470

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Kdodsxlqntopfx Ab Uow Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: excellent (used), For sale is a nice jointer-thickness planer from SCM. The machine works flawlessly and can be inspected and tested on site. About the machine: - 410 mm planing width - 3-knife Tersa cutterhead - Motor brake - Tiltable fence Kdodpfx Abjxqg Uas Usw - 240 mm planing height

Condition: used, Year of construction: 2009, Used SCM edgebander model OLIMPIC K1000 Control panel with membrane keyboard Technical data: Min. panel height: 8 mm Max. panel height: 55 mm Min. edge thickness (roll): 0.4 mm Max. edge thickness (roll): 3 mm Max. edge thickness (solid wood): 12 mm Configuration: Strip edge magazine Glue pot capacity 1.5 kg, with independent motor No. 4 pressure rollers with pneumatic feed, first roller with independent motor Edge roll guillotine End trimming unit with 2 independent motors, tiltable 0-15° - each 0.35 KW - 12,000 rpm Overlapping trimming unit with 2 motors, each 0.65 KW - 12,000 rpm - tools with reversible knives Tiltable corner rounding unit for flat/radius finishing; 2 motors each 0.5 KW - 12,000 rpm, electro-pneumatic positioning - tools with reversible knives Kdjdoxrndxepfx Ab Uew Electro-pneumatic exclusion of the unit Glue scraper unit Machine length: 4,310 mm Year of manufacture: 2009 CE marked

Condition: excellent (used), functionality: fully functional, SURFACE PLANER machines . different models second hand machines Kodpfowt T Hdsx Ab Ujdw n.4 knives volt. 380/50

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: AE/032748, Panel saw SCM SIGMA IMPACT 87, year 2009, capacity 4100x4100 mm Kdjdpfjxpw I Usx Ab Ujw

Condition: good (used), Code: 0198 Brand: SCM TECNOMAX Model: MB 21 - CE Standard Multiple boring machine with 21 spindles for furniture, custom-made furnishings, kitchens, bathroom furniture, panels and various - CE Standard Technical data: 21 quick-release spindles Spindle centre distance mm 32 Worktable height mm 900 Worktable dimensions mm 905 x 372 Max tool diameter mm 40 Max drilling centre distance mm 640 Max drilling head stroke mm 70 Kodpfxjxbpbqs Ab Ujdw Motor power Kw 1,8 Min/max panel thickness 10/85 mm Manual movement for tilting the operating unit N°2 pneumatic clamps Side guide with stops Compressed air 6 bar Overall dimensions mm 1000 x 800 x 1300 h Weight kg 273

Condition: good (used), Year of construction: 2011, For sale is a first-hand used SMC edge banding machine in good condition. Manufacturer: SMC Year of manufacture: 2011 Type: Olimpic S 2000 "Model A" Weight 2000 kg Feed rate: 12-18m/min Working height (panel thickness): 8-60mm Kdsdpfx Abohf Aclo Usw Edge thickness: 0.4mm - 6mm - Flush trimming unit - Snipping unit - Surface scraper - Rounding unit all data without guarantee, sale only to commercial customers. Inspection by appointment in Karlovarská 1415, 363 01 Ostrov, Czech Republic Collection in Ostrov (Czech Republic) or in 94424 Arnstorf (Germany)

Condition: used, Year of construction: 2017, Xilog Maestro Numerical Control Tecpad mobile console Working range on X axis mm 3680 Working range on Y axis mm 1380 Working range on Z axis 250 mm N ° 2 work fields Bar worktop No. 6 adjustable bars of 1300 mm. Start Terminal arrangement N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups with line laser for the virtual 0 position in the Y direction No. 1 Prisma KS 5-axis vertical electrospindle with automatic tool change, 12 kW, 24,000 rpm, HSK 63F, rotation right and left Automatic tool change system with 10 positions, positioned on the front of the machine, HSK type cones Automatic tool change system with 16 positions, positioned on the back of the machine, HSK type cones F 12L drilling head with spindles arranged as follows: - No. 8 verticals on X and Y axis - N° 2 horizontal on X axis - N° 2 horizontal in Y axis No. 1 blade group for making grooves Pro-Speed Safety System Front bumper protection and safety system Automatic lubrication system 250 m3 vacuum pump Kdedpjxrcqgsfx Ab Uow

Year of construction: 2004, condition: good (used), I sell the multiple boring machine SCM TOP 35, Year 2004. Number of spindles 35 Offset 32mm 6 positions for pre-set drilling depths Kdodpfx Aoiu Urpsb Usw 2 Aluminium fences 2 x 1500mm 4 stoppers for Aluminium fences 4 material pressures pneumatic 2 electromotors 2 x 2,2KW Tilting 0-90° full servomotorical Two-step drilling with pneumatic active piston / max. Drilling depth140mm ! Max. Element width over the drilling head 1280mm. Total weight 693kg. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2022, functionality: fully functional, Single-sided edge banding machine for applying edge banding tape with hot-melt adhesive to all four sides of a rectangular panel, including the finishing of the edge tape. TECHNICAL SPECIFICATIONS: • Feed speed: 7 m/min • Panel thickness: 8 – 50 mm • Edge band thickness (strips): 0.4 – 3 mm (optionally 5 mm) • Edge band thickness (roll, incl. covers): 0.4 – 3 mm • Max. cross-section of edge material for trimming: 150 mm² • Roller holder diameter: 700 mm • Max. projection of edge band relative to the panel: 4 (2+2) mm • Min. distance between two panels: 600 mm • Min. panel length (minimum width 100 mm) with edge tape on roll: 160 mm; with edge material in strips: 180 mm • Min. length of edge tape on roll: 200 mm Kdsdpfx Aboxpgxvj Usw • Min. length of edge material in strips: 220 mm • Min. panel width with edge tape on roll: 110 mm (min. length 210 mm) • Working height: 900 mm • Width for fixed panel support: 615 mm

Condition: excellent (used), Wide Belt Sander SCM Sandya Uno Working width: 900 mm Working height: 3–160 mm Number of sanding units: 1 Unit configuration: COMBI metal-shoe Main motor power: 4 kW Optical oscillation Abrasive belt dimensions: 930×1525 mm Kodpfexlq Imjx Ab Ujdw Weight: 830 kg

Condition: good (used), Code: 0465 Brand: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatic edge bander for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various Technical data: Min/max gluing height mm 10/50 Min/max edge thickness mm 0,4/20 Min panel width mm 60 Min panel length mm 140 Adjustable feed speed m/min 12/18 Electric press lift Telescopic support for large panels Soundproof cabin Composition: Anti-adhesion unit: spreads anti-adhesive liquid on the upper and lower surfaces of the panel Gluing unit with pre-melting unit Pressure rollers End trimmer unit for front and rear vertical cutting of excess edging - N° 2 motors 0,5 Kw at 12000 rpm - Tool diameter mm 110 Kedpfsvhc E Hox Ab Usdw Top/bottom trimmer unit with superimposed motors for trimming the upper and lower sides of the excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Top/bottom trimmer and beveller unit for final upper and lower trimming of excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Manual turret device - automatic positioning of the tool post and front copiers according to the different edge band thickness Routing unit makes through holes and non-through holes in the edged side and on the upper and lower parts of the panel and is time controlled Cleaning unit for brushing and polishing of the edge bands applied - N° 2 motors 0,18 Kw at 1400 rpm which can be inclined vertically between 0° and 30° Compressed air 7-8 bar Overall dimensions mm 5600 x 1000 x 1500 h Weight kg 2500

Condition: refurbished (used), Year of construction: 2017, EDGEBANDER WITH NUMERICAL SETTINGS WITH EDGE DRESSER (ROUTER) & ROUNDING UNIT Brand: SCM Type (Model): K 360 HP-T-ER1 Serial no.: AH/120944 Ref: 123304 Year: 2017 (Photos taken before overhaul, before functional tests & before cleaning) MACHINING CAPACITIES : - Height of panel to be machined: 8 - 58 mm Thickness 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum width of panel to be machined: 90 to 1100 mm Kdedpfx Asrx S Ipeb Uew - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - StarTouch control - Predisposition for barcode reading - Ø800 mm unwind tray - Front extension - Easy size: digital positioning of infeed guide and feed height - Non-stick spray unit - Edge straightener (RT-V) 12000 rpm - Infrared panel preheating at infeed - Gluing unit (VC-VM) with interchangeable glue container for 1 kg granules. Heating time 12 minutes Pneumatic pre-cutter Digitized positioning (pressing) with 3 rollers including 1 motorized and timed roller - Tilting butt-cutting aggregate 0-20° 12000 rpm - Digitized positionning top/bottom trimming unit with copying. Milling cutter 1/4 round 2 mm (or chamfer) 12000 rpm - R2mm rounding aggregate 12000 rpm with digitized positionn. - Scrapers R1&2 mm top/bottom with digitized positions - Straight scrapers top/bottom - Edge finishing spray device (Nebulization) OTHER FEATURES : - Grinder motors: 2x2 kW - Cutting motors: 2x 0.19kW - Up/down motor: 0.30 kW - Drive motor: 1.1 kW - Milling motor group: 2x 0.65kW - CE marking - Lockable contactor, Mushroom stops - Power supply: 380v. Three-phase 50 Hz - Pneumatic supply: 8-10 bars (max), dry air - Suction: 1x Ø100 and 5x Ø80 mm Heads: 780 m3/h Trimming 360 m3/h Scrapers 2x360m3/h Max. foreseeable footprint in running order : 10.80 x 2.40 m Transport dimensions (WxDxH) : 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with assembled tools, manual, spare parts list and drawings. On order, the machine will be overhauled and brought up to standard, with inspection and dynamic functional testing.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AE00000087, Brand and Model: SCM ACTION P Year of Manufacture: 2018 Condition: Lightly used, excellent condition Location: Croatia Key Technical Specifications: - Type: Automatic cabinet clamp with “comb” pressing system - Vertical and horizontal automatic clamping - Brushless motors: 2 kW (vertical), 1.5 kW (horizontal) - Positioning speed: up to 160 mm/s - Max pressing force: 1400 kg (vertical), 1600 kg (horizontal) - Working area: up to 2500 mm length, 1300 mm height, 800 mm depth - Installed power: 4 kW / 15 A - Weight: approx. 1800 kg - Machine dimensions: 4200 × 1200 × 2250 mm Kodpexr T N Tsfx Ab Uodw - Safety: Safety photocells on both sides Functionality: - Manual loading and unloading - Ideal for quick cabinet assembly in kitchens, bathrooms, and offices Price: €16,500 + VAT Notes: - The machine is in excellent working order and was lightly used - Perfect for manufacturers looking to optimize cabinet assembly - Available immediately For more information, pictures or viewing appointment – feel free to contact us.

Condition: excellent (used), Year of construction: 2007, I sell the double end cutting and tenoning machine SCM CONCEPT NT. Working width up to 3000mm Kdsdpfx Abstv Rxbo Uow Configuration left side / fix: 1 pc. cutting saw aggregate 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Configuration right side / moving: 1 pc. cutting saw aggregate 1 pc. moulding aggregate 1 pc. moving jumping moulding aggregate Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Year of construction: 2007, condition: ready for operation (used), Main Drive Spindle speed range 18000 Number of axis 3 Movement X-Axis Movement 3400 mm X-Axis Rapid Traverse 80 m/min Y-Axis Movement 1720 mm Y-Axis Rapid Traverse 55 m/min Kdjdsw U E N Sjpfx Ab Ujw Z-Axis Movement 400 mm Z-Axis Rapid Traverse 25 m/min Additional Equipment Vacuum Pump: 90 m³/h This 3-axis SCM Record 125 N CNC Wood Machining Centre was manufactured in 2007. It features a robust 7.5 kW electrospindle reaching up to 18,000 rpm, and an automatic tool changer with 8 positions. The working area extends to 3400 x 1720 x 400 mm, supported by a vacuum pump of 90 m³/h. If you are looking to get high-quality milling capabilities, consider the SCM Record 125 N machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), functionality: fully functional, SCM T120C Spindle Moulder with Sliding Table Specification: • Condition: Used, fully serviced • Manufacturer: SCM • Model: T120C • Spindle diameter: 35 mm (option to change to 30 mm – extra cost PLN 1,500) • Motor power: 4 kW • Star-delta motor starting Kdsdpfx Abewthmxe Usw • Left/right spindle rotation • 4 belt-driven speeds: 2,900/4,400/6,000/7,200 rpm • Manual up/down adjustment • Foot brake and foot spindle lock • Longitudinal sliding table, suitable for tenoning, length: 105 cm • Original paintwork • Overall dimensions: 100 x 110 x 110 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Photos illustrate the actual condition of the machine • Possibility to test the machine on-site.

Condition: good (used), Code: 0473 Brand: SCM Model: OLIMPIC K 500 T/ER-2 - Norme CE Automatic edge bander with grinding unit for wood, veneer, pvc, melamine, abs edges, for furniture, joinery, custom furnishings, panels, kitchens, bathroom furniture and various - CE Standard Features: Min/max panel height mm 8/60 Panel height with Round group mm 10/45 Edge thickness mm 0,4/8 Roll edge thickness mm 0,4/3 Min panel width mm 55 Feed speed mt/min 11 Presser with motorized vertical adjustment Panel support shoulder Soundproof protection booth Incoming liquids Composition: Anti-adhesive unit consisting of two nozzles for spray application of the liquid - Two containers with anti-adhesive release liquid Grinding unit with 2 high-frequency motors - Diamond tools H64 MM - Diameter mm 100 F 30 h 65 - Copying kit for grinding unit Gluing unit VC 560 for edge application on panels up to 60 mm - Glue pot capacity kg 1,5 - Interchangeable pot Kdedevkdtwepfx Ab Uew End cutting unit - 2 independent motors each Kw 0,35 at 12000 rpm - Motor inclination from 0° to 15° - N° 2 blades diameter mm 115 - Front copiers Tilting Trimming Bevelling unit - to remove top and bottom excess edge - N° 2 motors Kw 0,55 - 12000 rpm - Inclination from 0° to 25° - Kit 2 pneumatic positions for quick change of processing from thin edges to radius edges Rounding unit with 2 motors sliding on prismatic guides - It performs both rounding and trimming of thin and thick edges - N° 2 motors each 0,55 Kw - 12000 rpm Edge Scraping unit for optimal finishing of Abs/Pvc edge complete with rotating copiers and suction hoods with chip collection box Glue Scraping unit - for removing glue residue from the bottom and top surfaces of panels Brush unit for perfect cleaning and polishing of the plastic material edge - Motor each Kw 0,25 - Brush diameter mm 150 Phon unit for Pvc/Abs edges Compressed air 7 bar Overall dimensions mm 5500 x 1150 x 1550 h Weight kg 1780

Condition: excellent (used), Year of construction: 2000, I sell the combined surface planing - thicknessing machine SCM 2250. Max. working width 510mm Spindle 4-knives 510x120mm Total weight 890kg. Surface planer: Max. construction cutting take-out 6mm Table dimensions 2200x510mm Fence tilting 0–45°. Thicknesser: Max. construction cutting take-out 8mm 1+1 top pressure rollers with anti kickback device. Kodpfjr Atdlex Ab Usdw 2 bottom rollers in table for better feeding of wet or heavy parts Working thickness adjustment manual . Dust extraction hose diameter 120mm. Machine in stock in Kežmarok, Slovakia, possibility to test.

Year of construction: 2011, condition: like new (used), I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank Material pressure zone pneumatic adjustable End cutting saws pneumatic adjustable Rough milling manual adjustable Kodpfx Abonwkbce Usdw Tilting radius milling top + bottom pneumatic adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Hot-air blower Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 12m/min. PUR glue possible. Second glue tank absolutely new included. Only 6.153 meters edgenbanded ! Machine practically new. Very good condition, fully working!

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine SCM K130, year 2009. Configuration: Edge banding EVA glue End cutting saws pneumatic adjustable 0-15° Tilting radius milling pneumatic controllable Free space for further aggregates Very good condition, fully working. Including CE and full documentation. Kdodpjt Ir Tpefx Ab Uow

Year of construction: 2010, condition: like new (used), I sell the panel beam saw SCM Sigma Prima 67. Year 2010. Cutting size 3300x3200mm. Cutting height 67mm. Max saw blade diameters 320 + 160mm Main motor 7,5kW Scoring motor 1,3kW Total power 10kW Total area covered W.5400mm x D.7000mm 8 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Label printing included. Software Ottimo Perfect Cut included. Kdsdpfx Aboi Evbzo Ujw Very good condition. Available immediately.