Used Scoring Perforating Machine for sale (65,334)

Year of construction: 2021, condition: ready for operation (used), travel distance X-axis: 1,400 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 400 mm, overall weight: 26,000 kg, total width: 4,300 mm, total height: 3,444 mm, product length (max.): 4,920 mm, number of axes: 3, This 3-axis GRENZEBACH FSW Machine DSM 3000 was manufactured in 2021. It features a working area with an X-axis of 1,400 mm, Y-axis of 3,000 mm, and Z-axis of 400 mm. The machine has a maximum spindle speed of 5,000 rpm and a rapid traverse of 20 m/min. If you are looking to get high-quality friction stir welding capabilities, consider the GRENZEBACH FSW Machine DSM 3000 we have for sale. Contact us for further details. • Units available: 2 • Weights: • Basic machine: 18,750 kg • ZC axis: 1,290 kg • Welding head: 10 kg • Control system: 750 kg • Overall machine: approx. 26,000 kg • Electrical: • Max. power consumption: 10 kW • Voltage: 400 V • Frequency: 50 Hz • Power supply: 3PH + N + PE • Mains fuse: 32 A • Pneumatics: • Min. line pressure: 6 bar • Connection diameter: 1" • Air consumption: approx. 21 m³/h • Compressed air quality: ISO 8573-1 Class 4.4.1 • Hydraulic system: • Flow rate: 5.1 l/min • Rated pressure: 340 bar • Filling quantity: approx. 15 l • Effective capacity: approx. 11 l • Working area: • Max. rapid traverse: 20 m/min • Max. process speed: 1.5 m/min • Process/operating data: • Process force X/Y: 2.6 kN • Process force Z: 10 kN • Max. spindle speed: 5,000 rpm • Operating temperature: +15 to +35 °C • Max. humidity: 70% • Max. operating time: 24 h/day Iodsz Ryaujpfx Ap Deih Additional equipment • Clamping device (approx. 7,500 kg)

Condition: used, Year of construction: 2014, x-travel 0600 mm y-travel 270 mm z-travel 430 mm table-size 1120 x 260 mm spindle turning speed range 40 - 1600 U/min spindle taper SK 40 Ijdpfjz R D Ensx Ap Dsih feed in x - axis 50 - 1000 mm/min feed range Z-direction 24- 402 mm/min rapid traverse x + z axis 1 m/min rapid motion - y-axis 1 m/min drive capacity - spindle motor 2,2 kW total power requirement 3,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 1,7 x 1,4 x 1,75 m Accessories: DRO and machine vice.

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Iedpfjzii A Dox Ap Djih Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Iodpfx Aozii Dnep Dsih Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick   Type: BZ1.0 / TH1S Isdpfxozdryzs Ap Djih   Zwick table-top testing machine   Zwick with a maximum force of 1.0 kN.   Crosshead travel: 1150 mm. Testing speed: 0.1 ... 1800 mm/min   Scope of supply: (See images)   (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have by phone.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Ijdpfx Aezil Uiop Dsih Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Working area height max. 1370 mm Working area width 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic unit 280 bar Footprint: 415 cm² Clamping device / specimen holder available (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2002, 0,4-3 mm Workingpiece thickness from to 6-45 mm Total length 3700 mm Isdpfx Aoz St Smsp Djih Feed speed 8 m/min. Weight 850 kg

Condition: used, Year of construction: 2003, Liebherr LC120 Gear Hobbing Machine 3mm maximum hobbable module 1,500 rpm maximum hob speed90mm maximum hob diameter Ijdpfjz Stlaex Ap Deih 200mm maximum hob lenght 45 hob head swivel angle 4 mimimum number of teeth 120mm maximum workpiece diameter 250mm maximum axial travel 145mm table diameter 250rpm maximum table speed 17kN load capacity 30mm tailstock travel 17,000mm/min rapid traverse 13kN tailstock holding force 775879h working hours

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t Iedpozhxi Defx Ap Deih dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: used, For profiling and edge-milling windows doors individual components and similar items with all-round profiles, including return feed Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Iodpfeztv Afex Ap Doih - 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Condition: used, WEINIG UNITEC 10 tenoning and slotting machine from a UC-Matic window production line, not in working order. Iedpfx Apjztv Axo Dsih

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 14,000 mm, total width: 4,500 mm, total height: 2,900 mm, overall weight: 12,000 kg, input voltage: 415 V, track width: 80 mm, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Model - PIE LINE. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Working width – 800mm wide. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Overall footprint – 14m long x 4.5m wide (including return conveyor) x 2.9m high. Line maximum width – 2.2m at widest point. This production line comprises of the following equipment/machinery: 1. 2 X sets of tooling complete with trollies – 1 X set for 4-across pies with casing diameter of 110mm and 1 X set for 3-across ‘family-style’ pies with casing diameter of 180mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 5a. Rademaker Flour Sifter. 6. Rademaker Tamping unit (used to press / tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘SPRAYING DEVICE’. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Press / Crimping unit / Marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie Exit/Discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. Iisdpjzvmy Hjfx Ap Deh 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. CONDITION - Requires some reconditioning before entering production. NOTES – BUYER TO REMOVE FROM SITE.

Condition: good (used), Year of construction: 1985, bore capacity in steel (diameter) 35.0 / 40.0 mm throat 315 mm bore stroke 180 mm turning speeds 130 - 3500 U/min table-size 615 x 470 mm column diameter 155 mm feed 0.1 / 0.2 / 0.3 mm/U spindle taper MT 4 MK engine output 2.0 / 2.4 kW weight 450 kg range L-W-H 800 x 650 x 2100 mm Features: - Heavy-duty column drill press - With extended column (200 mm) - Drive: "VARIO" V-belt * Continuously variable speed control - automatic spindle feed (0.1/0.2/0.3 mm/rev) * with electromagnetic engagement - pole-changing motor - clockwise rotation of the drill spindle - adjustable fixed drill depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Machined base plate Iedpfxjz S N Drs Ap Djih - Coolant system in the machine base - Machine light - Emergency stop button on the front - Operating instructions (PDF)

Condition: good (used), Year of construction: 2001, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 55.0 mm throat 335 mm bore stroke 200 mm bore spindles - Morse Taper MK 4 turning speeds 60 - 1.530 U/min table: 740 x 620 mm feed 0.15/0.2/0.3/0.36 mm/U total power requirement 2.6 / 3.1 kW weight of the machine ca. 850 kg range L-W-H 800 x 1150 x 2040 mm Machine comes from a vocational training workshop Good condition (!!) Features: Iisdpfxoz S N Dxe Ap Dsh - Heavy-duty/robust bench-mounted drill press - Drive: "VARIO" V-belt - Automatic spindle feed (0.15/0.2/0.3/0.36 mm/rev) - Stepless speed adjustment - 2 work tables with T-slots * Height-adjustable via hand crank - Adjustable drilling depth stop - Pole-changing motor - Machine light - Emergency stop button, front - Operatorâ??s manual

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Iiodsz S T Inepfx Ap Doh Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: excellent (used), Year of construction: 2003, operating hours: 23,273 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 1,400 mm, workpiece width (max.): 900 mm, workpiece height (max.): 240 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 13,200 kg, spindle motor power: 32 W, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1.200 Y-axis travel mm: 900 Z-axis travel mm: 500 Rapid traverse m/min: 30 Worktable Table dimensions mm: 1.400 × 900 Iiodpfxsz S Uddo Ap Dsh Max. workpiece weight kg: 1.800 Maximum workpiece size (W x L x H ) mm: 1.400 × 900 x 240 Spindle Spindle speed rpm: 10.000 - 16.000 - 24.000 Spindle drive power kW: 32 Spindle torque Nm: 200 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 Max. Tool Diameter: 125 Max. Tool Length mm: 300 Max tool weight kg: 4 Chip-to-chip time s: 6,5 Equipment Electronic Handwheel Chip conveyor Workarea light Cooling Tank capacity: 300 L Machine running times Under power: 103.179 Rated power kVA: 31 Operating Time: 23.273 Basic machine dimensions / weight Length mm: 4.000 Width mm: 3.000 Height mm: 2.800 Weight kg: 13.200

Condition: good (used), Year of construction: 1998, functionality: fully functional, Machine was overhauled in 2017! -Distance from the workpiece spindle head to the front edge of the internal grinding spindle carrier: max. 540mm -Longitudinal adjustment of the internal grinding unit on the table: max. 210mm -Feed rate: 0.0005mm -Grinding head mounting bore: Ø 80mm x L: 180mm Equipment: -Truing device with diamond insert Iiedpsz Rm Swefx Ap Doh Work performed: -Guides renewed -Grinding spindle overhauled -Machine completely disassembled and wear parts replaced -Repainted

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The machine is in very good condition and comes from a training workshop. Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 rpm feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication Ijdpfx Asz Rpcrep Doih * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, controller model: 640M, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,500 kg, rotational speed (min.): 25 rpm, rotational speed (max.): 6,000 rpm, overall weight: 8,900 kg, coolant supply: 15 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, We are pleased to offer this very well-maintained Mazak MYV 515/40N vertical machining centre, manufactured in 2006. The machine is fitted with the Mazatrol 640M control system. This machine impresses with its stability and suitability for heavier machining operations. Technical specifications: Table dimensions: 1300 x 550 mm Table load capacity: 1,500 kg Number of pallets: 1 X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 560 mm Spindle speed: 25 – 6,000 rpm Spindle mount: MAS BT 50 Iiedpfx Apsz Rmb Ej Doh Spindle motor: 18.5/15 kW Positions in tool magazine: 30 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Distance between clamping plates max.: 4000 mm Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Iiodpfjz Rmrdsx Ap Dsh Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 The machine is supplied with a Kuka robot and can be inspected during production.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Matsuura G-tech (Fanuc), controller model: 16i, workpiece height (max.): 750 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 400 kg, total height: 2,635 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 13,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained Matsuura H-Plus 405 with pallet pool. This is a highly compact machine with extensive machining capabilities and 240 tool positions in the magazine. The machine was manufactured in 2004 and is equipped with the Matsuura G-Tech 16i (Fanuc 16i) control system. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 6 Table load capacity: 400 kg X-axis travel: 600 mm Iiodpfez Rmk Tex Ap Dsh Y-axis travel: 600 mm Z-axis travel: 600 mm Table indexing: 0.001° Spindle mount: Mas BT40 Big Plus Spindle speed: 50 – 15,0001 rpm Spindle motor: 22/18.5 kW Magazine capacity: 240 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of manufacture: 2014 Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 Iijdpfx Asx Hwhxsp Doh - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, operating hours: 11,517 h, total height: 2,880 mm, total length: 10,000 mm, total width: 2,700 mm, Year of manufacture: 2014 Colour: White Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Main motor power [kW]: 10 - - C-axis present: Yes Iodpfx Asx E Uk Uep Djih - Type milling table: Flat table - Drilling unit present: Yes - └ Motor power [kW]: 3.6 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Safety mat, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - └ Oil free: Yes - CNC documentation available: USB stick - Table length [mm]: 5150 - Table width [mm]: 1600 - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Transport dimensions: 10000mm x 2700mm x 2880mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 2,000 mm, total width: 1,300 mm, total length: 5,900 mm, Year of manufacture: 1990 Colour: Green Empty weight: 7.500 kg Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Drive system: CNC - Control system brand: Optronic - Control system type: CNC D140 - Horizontal/vertical: Horizontal - Model: Gear hobbing machine - Min. module [mm]: 0.5 - Max. module [mm]: 8 - Max. workpiece width [mm]: 2300 - Max. workpiece height [mm]: 500 - Max. workpiece weight [kg]: 100 - Table length [mm]: 2300 - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information Iiedpjzy E Tajfx Ap Deh VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Year of manufacture: 2015 Colour: White Empty weight: 1.240 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 Ijdpfx Apozavvge Djih - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety feature: - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels