Used Scrap Metal for sale (35,099)

Condition: good (used), Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp Dkodpfxep A A Rvs Ap Ieu -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 8-32 mm -Load capacity: 8 t -Quantity: 1x clamps available -Dimensions: 275/80/H300 mm -Weight: 30 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation! Djdpfxeqabm Eo Ap Ioku

Year of construction: 2025, condition: new, functionality: fully functional, Description This is a brand new Ceia THS21ET/3F, manufactured in 2025, it includes a standard manufacturers 12-month warranty. It comes with Three frequency technology which means that the machine will automatically select a suitable frequency for the product. This means far more flexibility of types of products that this detector can run, compared to traditional metal detectors This machine will be ready to view at the end of September, and will be available immediately from that point to Buy or Rent. Dedpfjum I Slsx Ap Ijku Technical Specification Aperture dimensions 550 wide x 350 high Belt stop & alarm reject system Modular belting Variable speed Currently runs right to left but can easily be changed to left to right. Protected reset system

Condition: good (used), Year of construction: 1998, Offer 24339 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. Dkjdpfx Apst Uzxno Iou - Contact wheel / sanding roll for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Dkododg Snnjpfx Ap Isu -Sheet metal claws -Span: 50 to 100 mm -Load capacity: 6000 kg -Quantity: 1 piece available -Price: per piece -Weight: 29 kg/piece

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 4000 kg Dksdpfxjdkbfye Ap Isu -Number: 1x terminals available -Price: per piece -Weight: 21 kg/piece

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 60 mm Dkedpob A Hc Tjfx Ap Isu -Load capacity: 3000 kg -Number: 8 terminals available -Price: per piece -Weight: 16 kg/piece

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RYW 800 EU – Deburring & Edge Rounding Machine The ADV 508 RYW 800 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. The combination of a wide grinding belt, rotating brushes and disc brushes allows efficient processing of both outside contours, inside contours and holes. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 800 mm working width Dkjdpfxszwqwfe Ap Isu Deburring, edge rounding and surface finishing Wide belt grinding unit for burr removal 4 rotating brushes for multidirectional processing 7 disc brushes for edge rounding of contours and holes Suitable for steel, stainless steel and aluminium Vacuum and magnetic workpiece holding Servo-controlled height adjustment Siemens / Delta PLC control Touchscreen HMI Technical Specifications Model: ADV 508 RYW 800 EU Working width: 800 mm Material thickness: 0.5–100 mm Minimum workpiece: 50 × 50 mm vacuum / 30 × 30 mm magnetic Feed speed: 0.5–7 m/min Grinding belt: 2,000 × 820 mm Grinding belt motor: 15 kW Grinding belt speed: 0–15 m/s Rotating brushes: 4 × Ø300 × 300 × 40 mm Rotating brush motors: 2 × 2.2 kW Disc brushes: 7 pcs. Disc brush motors: 7 × 1.1 kW Disc brush speed: 0–24 r/s Disc brush oscillation: 0–30 mm adjustable Vacuum pump: 15 kW Height adjustment: Servo-controlled Control: Siemens / Delta PLC Operating panel: Touchscreen HMI Power supply: 3~ 380 V / 50 Hz Complete Finishing in One Pass The wide grinding belt removes heavier burrs and prepares the surface. The rotating and disc brushes subsequently process the workpiece from multiple directions, providing consistent edge rounding on external contours, internal contours and holes. This makes the RYW configuration particularly suitable for companies processing a wide variety of complex sheet metal components where consistent and reproducible finishing is required. Service & Availability The ADV 508 RYW 800 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: good (used), total width: 1,000 mm, total length: 1,400 mm, total height: 870 mm, For sale is a solid, cast-iron straightening and marking plate with dimensions of 1400 x 1000 mm. This plate comes from a metal or sheet metal processing workshop and is ideally suited for straightening work, measuring tasks, jig and fixture construction, as well as assembly and testing operations. Technical specifications: Dimensions: 1400 x 1000 mm Material: Cast iron Heavy-duty industrial design Transport openings on the sides Includes 4 adjustable straightening supports Condition: Used Robust workshop design Normal signs of wear and storage Immediately available Application areas: Mechanical engineering Toolmaking Welding technology Sheet metal processing Measuring and testing operations Jig and fixture construction Other Inspection possible by appointment. Please note that the sale of this straightening plate is only possible under the following conditions: Dsdjzwuaqspfx Ap Ijku • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: excellent (used), functionality: fully functional, number of drawers: 18, total width: 2,650 mm, total length: 8,700 mm, Glass storage / Sheet metal storage Technical data: Dksdpfezmqi Tsx Ap Iju 3 separate units, each with 6 compartments = 18 drawers Walkable roof & additional storage space Drawer dimensions: 2000 x 1800 x 300 mm, 1300 kg/drawer Dimensions per unit: 2900 x 2650 mm Manufacturer: Torgauer Maschinenbau Availability: immediately

Condition: good (used), functionality: fully functional, Timesavers 42 Series-1350-WRB The 42 series features 2 stations: a belt sanding station, which is ideal for removing burrs and raised edges, and a second station with rotary brushes for even edge rounding. The vacuum conveyor belt also makes processing small parts, even those the size of a business card, easy. Dkodpfx Apeznm R Ne Isu Working width: 1350 mm Table opening: 0.8-100 mm Conveyor belt: frequency-controlled and steplessly adjustable in speed Rotary brushes: frequency-controlled and steplessly adjustable in height and speed Note!! The vacuum pump shown in the pictures is missing; it will be mounted on top of the machine.

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5562, Offer 24212 Technical data: Dodjzqtntjpfx Ap Isku - Saw blade diameter: up to 350 mm - Saw blade feed via hand lever - Maximum opening width of the vise: 205 mm - Cutting range: - with saw blade diameter of 350 mm - at 90°: - round: 120 mm - square: 110 mm - rectangular: up to 200 x 90 mm or 140 x 110 mm - at 45°: - round: 100 mm - rectangular: 100 x 100 mm - Miter adjustable: - Left: up to 45° - Right: up to 30° - Saw blade speeds: 34 + 68 1/min - Drive: 400 V / 2 / 2.6 kW - Coolant system - Feed – roller table: 2000 mm - Space requirement: approx. W 850 x H 1750 x D 950 mm - Weight: approx. 400 kg

Year of construction: 2018, condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. The system was last used with AlSi10Mg aluminum powder. The 3D printer has already been dismantled by the manufacturer. Dismantling and functional reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. Dsdpfxjzpvdzj Ap Ioku TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating time Laser 1 "Beam on" time: 5,165 hrs Laser 2 "Beam on" time: 5,096 hrs Laser 3 "Beam on" time: 5,023 hrs Trumpf TruPrint 5000 including Powder Bed Monitoring and Melt Pool Monitoring options Filter system Accessories: 2x Build cylinders 3x Dosing cylinders 1x Overflow container (used) 1x Overflow container (NEW) Manuals 4x Heat exchangers (NEW) 2x Easy Filters (NEW) 3x NTRON SIL02 Oxygen Analyzer + Sensor (NEW) 1x Oxygen sensor (NEW) ...and much more, such as seals, etc. An Armanni CAR.Elev. pallet truck for changing containers is also in stock and can be offered as an optional extra. Get high-quality 3D components faster The TruPrint 5000—a high-productivity, semi-automated 3D printing system—prepares you for industrial serial production. With features such as optional 500°C preheating and a full-field multilaser configuration utilizing three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine manufactures high-quality components from various metallic materials quickly and reliably, meeting the rigorous quality standards of tool and mold making—including via 3D printing onto preform blanks—as well as those of the aerospace and medical technology sectors. Optionally, the entire process chain—sieving, printing, cooling, and depowdering—can take place in a protective gas atmosphere. Combined with TRUMPF’s external part and powder management systems and monitoring solutions, it is ideally suited for industrial additive serial production. Thanks to the preform option, the TruPrint 5000 supports hybrid component production. In this process, the additive component structures are built directly onto a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduced if preheating >200 °C) Processable materials[1] Weldable metals in powder form, e.g., stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build rate[2] cm³/h 5 – 180 Layer thickness[3] μm 30 – 150 Max. laser power at workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 – 500 Min. measurable oxygen content ppm Up to

Condition: used, Metal circular saw Meb,Coll 380, saw blade 250x2, various angle cuts possible, with 3 saw blades. €350.00. Dkodpfxezpd Uze Ap Iou

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 5,000 mm, feed length X-axis: 500 mm, type of input current: three-phase, rotational speed (max.): 2,800 rpm, compressed air connection: 7 bar, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 500 mm Rotational speed: 2,800 rpm Feed length per cycle: 5,600 mm Cutting angle: 90° Miter function depending on machine configuration MACHINE DETAILS Suitable materials: Aluminum profiles, thin-walled light metal profiles, window and door profiles Power supply: 230/400 V, 3~ Frequency: 50 Hz Dkedjzqbltopfx Ap Iju Compressed air connection: 7 bar EQUIPMENT Chip extraction

Condition: new, Year of construction: 2026, SERVICE CENTER HALVER FOR BENDING TECHNOLOGY. Your competent partner for bending machines. We are your contact for high-quality sheet metal processing throughout Germany. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we address the needs of our customers locally and see ourselves as an extension of the production department. If required, the machines can be demonstrated, along with expert advice and professional training. We offer individual advice tailored to your needs and look forward to your inquiry. Dkedpfxszuvayj Ap Iou The Prod-Masz RED2200/0.8 bending machine, mounted on transport rollers with a 60mm/45° cutout, is available for testing and immediate purchase. Technical data: -Working width 2140mm -Sheet thickness - steel up to 0.8mm -Non-ferrous metals 30% greater sheet thickness -Bending angle up to 145° -Bending flange: 15 mm -Throughput: 80 mm -Degree scale -Stop for pre-set bending angles -Storage for sheets -Front depth stop -Weight approx. 250kg Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140mm) available upon request. Please note that all prices are subject to 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Accessories: Roller shear 350 EUR Shipping within Germany 180 EUR

Condition: excellent (used), Year of construction: 1994, Metal cutting Tooling COLOMBO & LENNA - 600 MACH-ID 4214 Make: COLOMBO & LENNA Type: 600 Year: 1994 Diameter: 600mm Dsdpfozc Ix Ejx Ap Ioku 4 chuck: x Spindle bore:115mm Connector: 11 Diameter 600 mmConnection Camlock 11Bore 115 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0312101, working width: 550 mm, overall weight: 3,000 kg, power: 32 kW (43.51 HP), TECHNICAL DETAILS Number of stations: 1 Station type: Belt grinding Maximum working width: 550 mm MACHINE DETAILS Power: 32 kW Control system: Conventional Machining process: Dry Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Dry weight: 3,000 kg Shipping packages: 2 EQUIPMENT CE marking Dkedpfx Apszrmqqe Iou

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,250 kg, total length: 137,000 mm, load per truss pair (max.): 3,250 kg, number of shelf rows: 10, frame height: 5,000 mm, clear span: 3,300 mm, frame width: 1,100 mm, shelf height: 5,000 mm, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) Dkodpozrbxcefx Ap Iju - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: like new (used), functionality: fully functional, machine/vehicle number: S0711Q0147, Year of construction: 2019, total length: 1,445 mm, total height: 1,680 mm, total width: 730 mm, overall weight: 650 kg, input voltage: 230 V, laser power: 200 W, TRUMPF TruPrint 1000 – 3D metal printer in near-new condition A well-maintained TRUMPF TruPrint 1000 from 2019 is for sale. The machine is a compact and professional 3D metal printer based on laser metal fusion and is suitable for the production of complex metal parts, prototypes, and small series. The metal printer was purchased and installed at Herningsholm Vocational School and Gymnasium in the summer of 2019. It has only been used for educational purposes and has therefore only produced a very limited number of prints. The laser has only a few operating hours, and the machine is in near-new condition. The printer has been used for printing in stainless steel 316L. All prescribed service inspections have been carried out. The latest service was performed in January 2026, and the machine has not been used for printing since. The service report is attached to the advertisement and can also be sent upon request. Djdpfezrfirjx Ap Isku Various consumables and spare parts are included. Machine data Manufacturer: TRUMPF Model: TruPrint 1000 Year of manufacture: 2019 Machine type: 3D metal printer Condition: Near new Build volume: Ø98.5 x 100 mm Material used so far: Stainless steel 316L Latest service: January 2026 Location: Herningsholm Vocational School and Gymnasium, Herning - Denmark The machine can be inspected by appointment. The buyer is responsible for moving the machine.

Condition: good (used), functionality: fully functional, XOCA 2000/5 sheet metal bending machine. Dedszurxlspfx Ap Isku

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Euro Fintec 410 is a deburring machine which has a 1 inch belt. The belt assembly can be easily adjusted to accommodate complex deburring operations. It comes complete with a dust collection bag to ensure safe operation It is in excellent condition and comes complete with a number of deburring belts. Djdpozmafqofx Ap Isku

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Dedpfxehwrhmj Ap Ijku Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System. -Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick. -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Dedpfx Apjhq A Txo Ieku Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries. Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance. Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability. Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output : Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time.

Condition: new, Year of construction: 2026, -TFON Leveltech® XS-3520 Leveling Machine. Dedpfx Apjityvfe Isku -The TFON Leveltech® XS-3520 is a compact and efficient leveling solution designed for thin materials and smaller widths. Equipped with advanced electromechanical controls and user-friendly touchscreen operation, it delivers precision leveling with reliable overload protection for enhanced safety.. -Key Specifications: Material Thickness: 0.3 mm – 5.0 mm. Maximum Material Width: 200 mm. Minimum Material Length: 70 mm Flattening Gap Adjustment: Electromechanical / PLC Controlled. Overload Protection: Standard. Control Interface: Touchscreen HMI Machine Weight: 2,000 kg. Machine Dimensions: (L × W × H): 2,225 × 1,595 × 1,850 mm