Used Sealpac 800 for sale (8,288)

Condition: used, Year of construction: 2005, x-travel 800 mm y-travel 550 mm z-travel 550 mm table dimensions 1.150 x 550 mm Control Matsuura G-Tech 30i spindle tunring speed 12.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant supply (ICS) - 4th axis (Nikken) Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Pedpfx Afsx U Em Eo Iogg Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2014, operating hours: 8,500 h, functionality: fully functional, turning diameter over cross slide: 800 mm, turning length: 900 mm, turning diameter: 500 mm, spindle bore: 77 mm, spindle speed (max.): 3,200 rpm, Spinner TC 800-77 MCY Year of manufacture: 2014 Maximum turning diameter: 500 mm Maximum turning length: 900 mm Control: Fanuc 31i Maximum swing diameter: 800 mm Main spindle: Maximum speed: 3,200 rpm Drive power (main spindle): 24 / 33 kW Maximum torque: 630 Nm Chuck diameter: 250 mm Pgedeyax Hbepfx Af Isg Spindle nose: A8 Bar capacity: 77 mm Travel distances: X-axis: 360 mm Y-axis: 120 mm (-55/+65) Z-axis: 900 mm C-axis: 360° Tool turret: Tool stations: 12 positions Driven stations: 12 positions Tool holder: VDI 50 Speed range (driven tool stations): max. 4,000 rpm Drive power (driven tool stations): 5 / 9.6 kW Torque: 18 / 35 Nm Feeds: Rapid traverse X: 15 m/min / Z: 24 m/min Total power requirement: - kW Machine weight approx.: 7.5 t Space requirement approx.: 4.3 x 3.0 x 2.2 m Control ON hours: 44,700 Operating hours: 8,518 Machining hours: 6,631

Condition: used, Year of construction: 1990, pressure 50 t distance between columns 800 mm stroke 4 - 60 mm no. of strokes 30 - 300 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 350 mm table surface area 780 x 640 mm hole in the table 690 x 140 mm table height over floor 1150 mm ram surface 800 x 460 mm power requirement 26,0 kW weight of the machine ca. 9,00 t required space 2,4 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the German Safety Regulations (UVV) Pgedpfx Afevut Hus Isg with infinitely variable drive, automatic stroke adjustment electronic roll feed (PBK, WV 65-DSM 300P, yom. 2007) can be offered without or with putting into operation in given condition - video at seller's site before dismantling available

Condition: ready for operation (used), Year of construction: 2010, screw diameter: 25 mm, This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information. • Tiebar spacing: 470x470 • Single platen: Yes Pgodsx D R Epopfx Af Ieg • Operating voltage: 400 V 3~ 50 Hz • Control voltage: 230 V ~ 50 Hz, 24 V DC • Motor/heating rated current: 76 / 59 A • Total rated current: 135 A • Total connected load: 76 kW

Condition: new, Year of construction: 2024, GT SERIES KNIFE MILLS MACHINES IN SOUND-ABSORED HOUSING COMPLETE WITH BIG-BAG STATION OPEN ROTOR WITH V-CUTTING SYSTEM THE FOLLOWING MILL SIZES ARE AVAILABLE IN STOCK GT300/600 ROTOR DIAMETER 300MM ROTOR LENGTH 600MM MAIN ENGINE 15KW Psdpfx Afjudyghs Iegg GT300/800 ROTOR DIAMETER 300MM ROTOR LENGTH 800MM MAIN ENGINE 22KW GT400/800 ROTOR DIAMETER 300MM ROTOR LENGTH 800MM MAIN ENGINE 30KW

Condition: used, Year of construction: 1975, turning diameter over bed 820 mm turning diameter over slide rest 575 mm turning length 3300 mm centre height 410 mm spindle bore 125 mm spindle turning speed range 7,1 - 1400 U/min total power requirement 22,0 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,3 x 1,6 x 2,0 mm Lathes with: - Digital readout Pgedpfxsyfwykj Af Ijg - Rapid traverse - Röhm 3-jaw chuck 315mm - 4-position tool post - 2 steady rests - Coolant system - Emergency stop device - Machine light - Chuck guard - 2 chip trays - Spare jaws (internal and external)

Condition: good (used), Quick-change tool holder size D with base Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Podsw Ec Eyspfx Af Iogg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Clamping Unit Clamping force: 8000 kN Max. platen size: 1520 mm Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Max. platen opening: 2300 mm Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm Pgodpfsx Up Utox Af Ieg 1st Injection Unit Screw diameter: 105 mm Shot volume: 4160 ccm 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Condition: used, Year of construction: 2001, operating hours: 10,900 h, functionality: fully functional, A fully functional scrap shear is being offered for sale. Pedpfx Aoyftwxef Iogg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,608 h, controller manufacturer: SIEMENS, This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine. Podex U D Hqepfx Af Ijgg • Tools: 30 pcs • Incl tools shown on the pictures • Excl barfeeder

Condition: excellent (used), Bosch Scara SR 800 Robot with Controller + Cell, Swivel Arm Robot with Mounting Device You are purchasing a fully functional Bosch Scara SR 800 robot with controller and complete cell. Pgsdpfx Afjyfhn Se Ijg Upon request, we can also ship the robot without the cell. Everything is in working order and has been regularly serviced. Find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2000, condition: ready for operation (used), This MELCHIORRE ELC 800 7S was manufactured in 2000. It is a surface grinding machine featuring a maximum wheel diameter of 800mm. Consider the opportunity to buy this MELCHIORRE ELC 800 7S surface grinding machine. Contact us for more information. Pgedpfx Afsx Ut Hyo Isg • Max Wheel Diameter: 800mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.) Psdpjx D Dx Asfx Af Ijgg

Operating hours: 0 h, condition: ready for operation (used), General Location: 15 x Bremen Condition used Container Manufacturer Stöcklin Volume 800 Liter Max. Overpressure 1,0 bar Max. permissible operating temperature 120 °C Design Container Standform Feet Number of feet 4 pieces Technical data / dimensions Diameter inside 1.000 mm Cylindrical height 700 mm Total height 1.590 mm Equipment manhole / dome in the upper bottom (DN 400) Type plate Equipment disc tap outlet DN50 DIN 11851 Remarks Traces of use Remarks Container in different versions, details may therefore vary; minor dents possible last Intended use Foodstuffs Material Condition Material in contact with product V2A 1.4301 (AISI304) Material Feet Stainless steel Podpjftmntefx Af Ijgg

Condition: excellent (used), Linear axis / Robot track BFW 800 / HSV 35 * Total length approx. 12,000 mm !!!! * 1 x base element, 3,250 mm long * 3 x coupling parts of 2,900 mm each Pgsdpeydmq Asfx Af Ijg

Condition: ready for operation (used), Year of construction: 1990, operating hours: 30,912 h, This 5-axis DMG DECKEL MAHO MH 800 E2 was manufactured in 1990. It features a semi-cabin splash guard, an adaptable control unit with power unit, an electrical cabinet, a MAHO vertical tool changer, an NC rotary table, and an electric manual control panel. Consider the opportunity to buy this DMG DECKEL MAHO MH 800 E2 universal machining centre. Contact us for more information about this machine. • Splash guard cabin (semi-cabin) • Control with adaptation and power unit, including electrical cabinet • Interface for connecting peripheral devices • MAHO vertical tool changer • NC rotary table • Electric manual control panel • Precision/positioning: • Position tolerance T_P: 0.020 mm • Position uncertainty P_a: 0.015 mm • Reversal span U: 0.005 mm • Position scatter: 0.005 mmAdditional equipment Psdex D Hqzjpfx Af Iogg • Damping plates

Year of construction: 2007, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ). SIMEX TF 800 Rock Cutter / Milling Attachment / Tunnel Cutter / incl. Liebherr SW48 Adapter Plate / Year of manufacture: 2007 / in stock & immediately available Price: €14,890.00 net / €17,719.10 gross Drum width: 800 mm Milling speed: 75–115 rpm Hydraulic motor power: 61 (83) kW (hp) Required oil flow: 105–190 l/min Required oil pressure: 200–350 bar Max. vertical force: 31.8 kN Operating weight (standard drum): 1,035 kg Pgedpfxeyfrp Tj Af Ijg Recommended excavator weight: 14–22 tons Equipment: - incl. Liebherr SW48 Adapter Plate We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a wide range of various attachments, all available for immediate delivery! Mr. Herden (phone ) will be happy to advise you. We are happy to provide a financing offer upon request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. Errors and interim sale excepted! Internal no.: 310390 = More information = Please contact Tobias Ebert for further details.

Year of construction: 2024, condition: used, For enquiries regarding this attachment, please contact Mr. Herden (by phone). Holp MultiGrip Bucket / MG.075.080 / MS03 / 800 mm cutting width / HARDOX / NEW Price: €4,215.00 net / €5,015.85 gross - Excavators up to: 7.5 t - Own weight approx.: 250 kg - Capacity SAE: 237 litres - Cutting width: 800 mm - Max. opening: 1,115 mm - The bucket is manufactured entirely from HARDOX. - The MultiGrip combines the two attachments, digging bucket and grab, into one single tool. Advantages of the Holp MultiGrip Bucket: - Cylinder with hardened piston rod - Only the grab rotary lines are required for operation - Robust sidewall mountings - Secure grasping and transport - Sturdy shafts connect the two tines (creating a 3-point grip for small items) - Considerably lighter than a traditional grab - Up to 30% more soil can be handled during digging operations - Reduced risk of damage from falling material The MultiGrip is suited for all digging and gripping tasks, making it ideal for placing stones, backfilling soil, and handling wood or brushwood—while being significantly faster than a grab. It is capable of gripping and sorting all types of materials, including soil and grass. The unique design of the MultiGrip bucket ensures optimal penetration and excellent performance with bulky materials. We have many other Holp products in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. If desired, we can also provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. Podpfx Aoyfq Nfof Isgg We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range! Subject to errors and prior sale! Rental possible = Further information = Condition: New Intended use: Construction Please contact Tobias Ebert for further information.

Year of construction: 2024, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ). Holp MultiGrip Bucket / MG.095.080 / MS08 / 800 mm Cutting Width / HARDOX / NEW Price: €5,895.00 net / €7,015.05 gross Podsyfq H Rjpfx Af Ijgg - For excavators up to: 9.5 t - Own weight approx.: 345 kg - SAE capacity: 252 liters - Cutting width: 800 mm - Maximum opening: 1,200 mm - The bucket is made entirely of HARDOX. - The MultiGrip combines a trench bucket and a grab into a single attachment. Advantages of the Holp MultiGrip Bucket: - Cylinder equipped with a hardened piston rod - Only rotary lines for the grab function required - Robust sidewall-mounted bearings - Secure gripping and handling - Strong shafts connect the two jaws (creating a 3-point grip for small items) - Significantly lighter than a conventional grab - Up to 30% more earth can be loaded during digging work - Reduced risk of damage from falling material The MultiGrip is suitable for all digging and grabbing tasks, making it ideal for placing stones, backfilling soil, grabbing wood and brushwood, and it operates much faster than conventional grabs. It can handle and sort all types of materials, including earth and grass. Thanks to its unique design, the MultiGrip bucket provides optimal penetration and works well with bulky materials. We have a wide range of Holp products in stock for immediate delivery! Feel free to contact us at / . Financing options available upon request. We are an official sales and service partner for the following brands: - Holp - OilQuick - Weber MT - Magni Telehandlers - DMS - Seppi M. - Westtech - JCB construction machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp product range for you! Subject to errors and prior sale! Rental possible = More information = New: Yes Intended use: Construction Contact Tobias Ebert for more information.

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an injection molding machine from the manufacturer Arburg, model 370 C 800-100. Unfortunately, the injection unit is no longer available. Overall, the machine is in good condition. Technical Data: Year of manufacture: 2007 Clamping force: 800 kN Tie bar spacing: 370 x 370 mm Max. daylight: 750 mm Mold installation height: 250 mm Injection unit: 100 (not included) Pgjdpfxsx U Dnuj Af Ijg Transport and loading can be organized Europe-wide upon request for an additional charge. Prices include VAT. Inspection by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production line? Or would you like to sell your own? For more information or contact options, please visit our website.

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Podpfx Afsviq U Ee Isgg Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Pgjdpfxjwugczj Af Isg Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Year of construction: 2021, condition: as good as new (ex-display), Drive: electric 24V Operating hours: 30 Pneumatic tyres on rear axle: yes Side brushes: yes / 2x Cleaning area: 6,000 - 16,000 m² Max. area performance: 6,700 m²/h Working width without side brushes: 800 mm Length: 1,600 mm Width: 1,080 mm Maximum gradient: 10% Pgjdpfjxzfwnsx Af Ijg Operating hours: 30

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 259-45, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840 D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-Axis Travel: 800 mm Y-Axis Travel: 550 mm Z-Axis Travel: 550 mm Tool Holder: HSK 63 Spindle Speed: 12,000 rpm Number of Tool Stations: 65 MACHINE DETAILS Control: Siemens 840 D Pgodpfx Afoyfum Ue Isg Spindle Hours: approx. 16,000 h EQUIPMENT Chip conveyor: Knoll Paper band filter: Knoll Zero-point clamping system: System 3R GPS 240 Laser measurement system: Blum LaserControl Digital 3D touch probe: Renishaw Automation interface Automatic door Oil mist extraction Internal coolant supply

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 Psdpfx Afevuuiko Iegg overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available