Used Section Bender for sale (3,145)

Condition: used, functionality: fully functional, Year of construction: 2011, machine/vehicle number: 606411, cutting range flat at 90° (X-axis): 600 mm, cutting range flat at 90° (Y-axis): 15 mm, cutting range square steel at 90°: 50 mm, cutting range round steel at 90°: 55 mm, cutting range angle steel at 45° (X-axis): 80 mm, cutting range angle steel at 45° (Y-axis): 10 mm, cutting range angle steel at 90° (X-axis): 150 mm, cutting range angle steel at 90° (Y-axis): 18 mm, sheet thickness (max.): 13 mm, Equipment: foot remote control, We offer this used Kingsland Multi 125 shearing machine for profiled steel, manufactured in 2011. Year of manufacture: 2011 Hnsdpfx Asz D Tf Ajk Uou Punching – dimensions: 35 × 25; 57 × 16; 30 × 20; 38 × 15 mm Bending capacity for flat bar: 250 × 22 mm Shearing of flat bar: 380 × 25; 600 × 15 mm Shearing of angle profile at 90°: 150 × 18 mm Shearing of angle profile at 45°: 80 × 10 mm Cutting of round bar: up to Ø 55 mm Cutting of square bar: 50 × 50 mm Cutting with extra blades: up to 200 mm Notching – rectangular: 60; 100 mm Notching with additional tools: 80; 90 mm Maximum material thickness: 13 mm If you have any further questions or require more information, please send us a message or call us.

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) Hodpfx Akjz Ix Uko Uenu • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: HEB IPE section bending roll, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, shaft diameter: 200 mm, roller diameter: 650 mm, bending radius (max.): 1,000 mm, pipe diameter (max.): 250 mm, overall weight: 27,000 kg, input voltage: 380,440 V, input frequency: 5,060 Hz, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending roll hydraulic model AR200, year 2008 make MG Italy Capacity bending chart and photos in enclosed -Technical data: Output shafts size 200 mm Hnjdpfx Aksz Dkr Hs Usu -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. -electric 30 Kw on the hydraulic power unit- voltage 380/50 -Digital position readout on the bending rolls -Manuals and schematics all available along with the machine. -Machine delivered in working condition. CAPACITY CHART IN ENCLOSED MG MODEL AR200 SECTION BENDING ROLL

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering Hnedpfjium Eujx Ak Uou - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 59 mm, roller (top) diameter: 59 mm, side roll diameter: 59 mm, overall weight: 420 kg, total length: 1,700 mm, total width: 400 mm, total height: 1,100 mm, input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1300 × 1.5 mm – Electric 3-Roll Sheet Metal Bending Machine MACHINE IN STOCK – READY FOR IMMEDIATE DISPATCH Price: €2,080 net EXW European delivery available – transport quotation on request. The MTP ESR 1300 × 1.5 mm is a compact, electrically driven 3-roll sheet metal bending machine designed for rolling cylindrical parts, tubes, sleeves, rings and light conical components from sheet metal. Hnedpfez Hx Eajx Ak Uou The machine combines a rigid welded frame with hardened, high-quality steel rolls and simple mechanical adjustment. It is suitable for workshops, metal fabrication companies, maintenance departments and small/medium production facilities. MAIN TECHNICAL DATA • Working length: 1300 mm • Maximum sheet thickness: 1.5 mm • Roll diameter: 59 mm • Motor power: 0.75 kW • Dimensions: 1700 × 400 × 1100 mm • Weight: approx. 420 kg • System: 3 rolls • Drive: electric • Condition: brand new MACHINE FEATURES The machine uses a three-roll bending system with eccentric pressure adjustment. The upper and lower rolls are manufactured from high-grade hardened steel, providing good wear resistance and stable forming accuracy. The rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for basic cone rolling within its standard adjustment range. The photographs show a robust and straightforward mechanical construction with: • manual handwheel and lever adjustment, • electrically driven roll rotation, • front-mounted control panel, • emergency stop button, • foot pedal operation for convenient starting and reversing of the rolling process, • safety cord / perimeter emergency protection, • solid floor-standing frame, • accessible mechanical components for easy adjustment and maintenance. Foot control allows the operator to keep both hands free for positioning and guiding the sheet during forming, which is especially useful when working with larger panels. APPLICATIONS Suitable for producing: • cylindrical sheet-metal components, • pipes and sleeves, • rings, • curved panels, • light conical parts, • workshop and fabrication components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, rolling technology and correct working parameters for different materials. We provide warranty and post-warranty service and can organise professional transport throughout Poland and the whole of Europe. The machine is brand new, CE marked, covered by the manufacturer’s warranty and available immediately from stock. Please contact us for delivery costs, additional technical information, photos or a commercial quotation.

Condition: ready for operation (used), Peddinghaus Model 210 Super 16 / Profile Steel Shear - COMPLETE TECHNICAL DATA, SEE PHOTO - Punching force 860 - 900 KN (86-90 tons) Hjdpez Dq Tkefx Ak Uenu - Punching capacity max. 31mm / 20mm thickness - Reach approx. 510mm - Punching stroke max. 29mm - Stroke rate 40-45 strokes / minute Material capacity (shearing & notching) - Round steel up to max. 50mm - Square steel 40x40mm - Angle iron (L-profile) 140x140x13mm - Notching (I & T steel up to 80x14mm) - Drive power 4 KW - WITH PUNCHING TOOLS & Punches & Spare blades - Foot switch - DOCUMENTATION Dimensions: L x W x H 2.1 x 0.8 x 2.2 meters / Weight 3700KG Subject to errors / typographical errors

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 5-station profiling steel shear from Kingsland (Haco) Type: Compact 45 Punching capacity up to 22 x 15 mm Force: 45 tons Year of manufacture: 2005 Includes bending adapters! Hnsdpjz Ilzkofx Ak Uju

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m Hnsdpfx Aexu Dxqok Ueu -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: good (used), Year of construction: 2009, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 760 mm, roller (top) diameter: 840 mm, side roll diameter: 610 mm, sheet thickness (max.): 100 mm, overall weight: 130,000 kg, total length: 7,500 mm, total width: 3,250 mm, total height: 4,250 mm, Equipment: cone bending device, hardened rollers, 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9183 Make: HAEUSLER Type: VRM-HY YOP: 2009 Force lower rol upper roll 1178 Ton Cone bending attachment Hardned and grounded rolls Width between upper and lower roll 200 mm Power 180 kW Rolling width: 3050mm Rolling thickness 3x toproll Ø:90mm Hnjdpfxoz Sy U Ie Ak Usu Rolling thickness 5x toproll Ø:100mm Rolling thickness prebending: 80mm Top Roll Ø: 840mm Bottom Roll Ø: 760mm Side roll Ø: 610mm Number of rolls: 4 Rolling speed: 1,5 / 3 / 4,5 / 6 M/Min Adjustiment lower roll: 0 - 300mm/min. Number of driven rolls: 2 Power: 180kW Length: 7500mm Width: 3250mm Height: 4250mm Weight: 130000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 60 mm, roller (top) diameter: 60 mm, side roll diameter: 60 mm, overall weight: 310 kg, total length: 1,300 mm, total width: 700 mm, total height: 1,260 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1020 × 2.0 mm – Electric 3-Roll Sheet Metal Bending Machine PRICE: €1950 NET EXW European delivery available – transport quotation on request. The MTP ESR 1020 × 2.0 mm is a robust electrically driven 3-roll sheet metal bending machine designed for accurate rolling of cylindrical components, tubes, sleeves, rings and light conical parts. Its compact footprint, rigid welded frame and hardened steel rolls make it suitable for professional fabrication workshops, maintenance departments and production facilities requiring a reliable machine for regular sheet-metal forming work. MAIN TECHNICAL DATA • Working length: 1020 mm • Maximum sheet thickness: 2.0 mm • Roll diameter: 60 mm • Motor power: 0.75 kW • Power supply: 400 V • Dimensions: 1300 × 700 × 1260 mm • Weight: approx. 310 kg • Number of rolls: 3 • Drive: electric • Condition: brand new MACHINE FEATURES The ESR 1020 × 2.0 mm uses a three-roll system with eccentric pressure adjustment, allowing straightforward positioning of the rolls and controlled forming of the workpiece. The rolls are manufactured from high-grade hardened steel, providing good durability and resistance to wear. The lower and upper rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for cone rolling within its standard adjustment range. As shown in the photographs, the machine features: • heavy-duty welded steel frame, • electric motor with reduction gearbox, • manual handwheels and levers for precise mechanical adjustment, • easy roll-position adjustment, • swing-out / releasable upper-roll arrangement for easier removal of finished cylindrical workpieces, • foot pedal for convenient forward/reverse operation, • emergency stop button, • perimeter safety cord around the working area, • clearly accessible operating controls, • CE marking and safety warning labels. Hsdpfx Akez Hx T Re Ujnu The foot-operated control allows the operator to keep both hands free for positioning and guiding the sheet during the rolling process, improving control when working with larger workpieces. APPLICATIONS Suitable for producing: • cylindrical sheet-metal parts, • tubes and sleeves, • rings, • curved panels, • light conical components, • general fabrication and workshop components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales assistance. We can help with machine selection, rolling technology and suitable operating parameters for different materials. Warranty and post-warranty service are available, and we can organise professional transport throughout Poland and the whole of Europe. Brand-new machine with manufacturer’s warranty. Available to order. Please contact us for current delivery time, transport costs, additional photographs, technical information or a personalised commercial quotation.

Condition: good (used), Year of construction: 2005, Used punching and shearing machine from Kingsland Type: Compact 45 Hnodpoz Imaujfx Ak Uju Includes tool for edge trimming

Condition: as good as new (ex-display), Year of construction: 2024, turntable diameter: 390 mm, bending angle (max.): 360 °, Stierli Radial 2500 CNC bending machine Radial bending machine with large rotary table for bends up to 360°. Bending power 2500 Nm Bending capacity flat steel 60x15 mm S235 Bending capacity round steel ø30 mm S2353 turntable ø : 390 or 550mm Pre-feed machine year 2022 incl. hand- and foot pedal Machine as new Works like a classic hand bender, but driven, very precise and programmable. Incl. stop manual or programmable CNC stop 1, 2 or 3m. The bending angles as well as the stop positions are digitally programmable and can be stored in bending programs. The standard tooling is made by simple bending pins. A driver bends the material around these bending pins. These tools can also be manufactured very easily by the customer. In addition to the standard bending bolts, we (or our customers themselves) also manufacture tools for other sections. Possible are sheet metal bending, flat steel, round steel, various profiles, frames etc.. Bending jaws can also be screwed on, which allows bending of very small radii. (similar to a hand bending machine) This machine solves your bending tasks! Hnsdpegqfp Hefx Ak Ueu

Condition: good (used), functionality: fully functional, pipe diameter (max.): 60 mm, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Max capacity flat bar: 60 × 12 mm Max capacity tube: ø 60,3 × 3,2 mm Max capacity angle: 60 × 60 × 3 mm Shaft diameter: ø 50 mm Shaft length: 115 mm Driven rolls: 3 Top roll diameter: ø 175 mm Bottom rolls diameter: ø 115 mm Height adjustment upper roll: 85 mm Shaft speed: 8–16 min-1 Control: HV control with digital readout Hjdpfx Akjz H Sfmj Ujnu Featured with: - Tubeset for ø50 mm - Machine user manuals Country of origin: Italy Motor power: 4 kW Machine (L×W×H): 125 × 77 × 140 cm Machine weight: 490 kg

Condition: good (used), punching/shearing machine GEKA Hydracrop 80/A Hsdszurz Hjpfx Ak Uenu Angle 130 x 130 x 13 mm Flat bar 450 x 15 mm Round bar 45 mm Square bar 45 mm Punch ø40 x 14mm Double-acting Equipped with an automatic side stop Weight approximately: 2500 kg

Condition: used, Year of construction: 2009, gebraucht 2009 9725 prompt, Zwischenverkauf v Spanien Hsdpfx Aowiq D Esk Ujnu 14700 € 1 110 to 300 mm 5 2 40x20 (28x28) mm 80 mm 17 1/min 600x15 (400x20) mm 605 mm 152x152x13 mm 50/50 mm 90x52x13 mm 5 kW 2130 mm 1200 mm 2200 mm 2500 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Back gauge depth: 1250 mm Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Bending die width: 10/20 mm Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Hsdjzz Adfepfx Ak Uonu Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: used, functionality: fully functional, Equipment: foot remote control, We are selling a well-maintained profile steel shear/punching machine, Peddinghaus Type 210 AD/13, from our workshop. Integrated functions: Hole punch Bar steel shear Profile steel shear Flat steel shear Notching device The machine thus combines several processing steps in a compact unit and is ideally suited for flexible use in steel and metal construction. Condition: The Peddinghaus is in perfect working order and is ready for immediate use. Accessories: Various tools included Foot pedal available Hnedpfx Aoziz Ewek Usu Important note: Due to the machine's high weight, shipping is unfortunately very difficult or only possible with significant logistical effort. We therefore recommend picking it up. Inspection: The machine can be inspected on-site at any time and tested during a trial run – this way, you can convince yourself of its functionality. We are available to answer any questions and provide further details.

Condition: used, functionality: fully functional, Kingsland 70P625 punching machine 70 tons of pressure Hodsz Ehxaepfx Ak Ujnu fully operational

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: manual, bending angle (max.): 130 °, overall weight: 430 kg, warranty duration: 24 months, Sheet Metal Bending Machine / Brake - Bender 3100mm - RG-C 3007 + Cutter RC-0.8 3-Meter Sheet Metal Bender – Professional Solution for Roofing contractors Our 3-meter sheet metal bender is a high-quality machine designed for roofing contractors and companies specializing in sheet metal processing who value precision, durability, and ergonomic operation. With its robust construction and precise craftsmanship, it ensures reliability and ease of use even under intensive working conditions. Key Features: ✅ Working length: 3 meters – allows bending of large metal sheets, increasing work efficiency. ✅ Sturdy steel construction – guarantees longevity and resistance to deformation. ✅ Precision bending – perfect for producing roofing elements, sheet metal trims, and gutters. ✅ Easy operation – an intuitive control mechanism enables quick and accurate sheet shaping. ✅ High clamping force – stabilizes the material, ensuring uniform bending along the entire length. Our 3-meter sheet metal bender is an indispensable tool on any construction site, improving the quality and efficiency of roofing work. 3-Meter Sheet Metal Bender – Technical Specifications Maximum bending length: 3100 mm / 122" Maximum bending capacity: Steel sheet: up to 0.7 mm Aluminum sheet: up to 1.0 mm Copper and zinc sheet: up to 1.0 mm Maximum bending angle: 130° Bending beam thickness: 30 mm Maximum clamping beam lift height: 80 mm Overall dimensions: 3460 x 900 x 1200 mm Weight: Approx. 450 kg (varies depending on configuration) Hnsdpfx Aksv Ax N Do Uju Clamping system: Manual with high clamping force for stable operation Construction: Heavy-duty steel frame ensuring durability and precision Accessories (included): Back support arms for large sheets Functional protractor for precise angle bending Roller cutter / shear - for quick and precise cutting of sheet metal along the working length of the bending machine Optional accessories (not included): Swivel castors with brake - (4 pcs.) - €160.00 This 3-meter sheet metal bender offers precision, durability, and ease of use, making it an ideal choice for roofers and professionals who demand reliable performance in sheet metal forming. Contact us for more information and to find the perfect model for your needs! Shipping costs on request.

Condition: used, Year of construction: 2024, Ficep Excalibur 1201 EX Sectional Steel CNC Milling & Drilling Line. Serial No. 38008 (2024),18m Fixed Extension (12m Long Section), Profile Size Min/Max 50/1200mm, 9 Position ATC, Max Drilling Diameter 40mm, Spindle Power 19kW, HSK63 Spindle Taper, Max Spindle Speed 5000rpm, Sub-Spindle Stroke 200mm, X-Axis Positioning, Clamping, Drilling Unit, Light Guard Surrounds. Country of Origin: Italy This lot has been professionally dismantled. Hsdpfx Asz Arylek Ujnu Location: These lots are located in Wolverhampton, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2007, Gebruikte pons knipmachine van Peddinghaus Hodjzul Adopfx Ak Usnu Type Peddimaster 110/170 Capaciteit ponsen 110ton Capaciteit knippen 170ton Inclusief zij aanslag en diverse gereedschappen

Condition: like new (used), Year of construction: 2012, round bar steel 45 mm square edge steel 45 mm L-beam 120 x120 x 12 mm total power requirement 5,5 kW weight of the machine ca. 1600 kg dimensions of the machine ca. 1700 x 950 x 1900 m Hnjdpfjy Hxq Isx Ak Uju

Condition: as good as new (ex-display), Year of construction: 2024, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Hjdpfx Aezzkwmsk Uonu Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 000464, Max. pipe diameter Ø 42 mm Min. pipe diameter Ø 6 mm Max. pipe thickness 2.5 mm Max. bending radius 270 mm Min. bending radius 25 mm US metric: Max. pipe diameter 1.654 inch Min. pipe diameter 0.236 inch Max. wall thickness 2.5 inch Max. bending radius Hnedpfovmpbrox Ak Uju 10.63 inch Min. bending radius 0.984 inch Throughput: 42; Rotation angle: 187°; Digital display: yes; Motor power: 95 kW; Electrical connection: 380 V; Machine weight: 1550 kg; Dimensions: 4700 mm; Width dimension: 800 mm; Height dimension: 1300 mm;

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Manufacturer: Mubea / Muhr und Bender Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Punching force: 35 t Punching: up to Ø 28 mm with a sheet thickness of 10 mm Punching: up to Ø 23 mm with a sheet thickness of 12 mm Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Hedpfx Akez Ahane Uonu Inspection is possible by prior arrangement. If you have any questions about the machine or would like further information, please do not hesitate to contact us.