Used Spindle Hours for sale (25,644)

Condition: excellent (used), Year of construction: 2010, Panhans PF45 swivel spindle milling machine in good, fully functional condition. The machine has only been used very rarely and has hardly any operating hours. Probably less than 100 operating hours. Therefore, it is slightly dusty. Year of manufacture: 2010 Swivel range: -5° to +45° Codpfx Aoz Dp Erjkteri Spindle diameter: 30 mm Vertical adjustment: 170 mm Spindle speeds: 3000 / 4000 / 6000 / 8000 / 10000 rpm Motor power: 5.5 kW Table size: 1,300 x 850 mm Weight: approx. 530 kg Right and left rotation of the milling spindle Optionally, a matching dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses with exclusion of liability for material defects. No guarantee, warranty, or right of return.

Condition: like new (used), Year of construction: 2014, operating hours: 58 h, functionality: fully functional, load capacity: 7 kg, arm reach: 800 mm, controller manufacturer: KUKA, controller model: KRC4 SUNRISE, teach pendant manufacturer: KUKA, input voltage: 220 V, ROBOT ARM MANUFACTURER: KUKA MACHINE TYPE: LBR iiwa 7 R800 MODEL YEAR: 2014 TECHNICAL SPECIFICATIONS PAYLOAD: 7 KG MAX. REACH: 800 MM Credo Ah S Edopfx Aktji CONTROLLER: KRC4 SUNRISE Operating Time (h): 58

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, Codpfxjtty Nko Akteri the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: used, Albach Diamant 2000 Wood Chipper Year of manufacture: 06/2020 Engine hours: 5,730 h Rotor hours: only 2,213 h! Engine: Volvo TAD 1643 [770 hp / 566 kW] without Adblue (!) Rotor: GEN 7, 23 degrees Infeed width: 1,230 mm Infeed height: 980 mm Rotor speed: up to 420 rpm Max. throughput: 450 m³/h Accelerator: GEN2 Speed: 80 km/h Crane: Epsilon S110 Max. reach: 10.1 m Load at 10.1 m = 1 t Grapple: Epsilon FG 31 Tires: Nokian 645/65 R42 high speed (80 km/h) Lift cabin 2x front supports Rockinger trailer coupling Central lubrication system Crsdpfxj Aftp Ds Aktoi Air hose reel + compressed air in the cabin 2x 230V sockets 2x fire extinguishers Remote control for discharge Dometic refrigerator/radio Camera for discharge and rear Co-driver's seat Dimensions: Length: 10.43 m Width: 2.55 m Height (raised cabin): 3.95 m (4.80 m eye level) Weight: 32,000 kg We explicitly request that you arrange an appointment! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. You can find more information on our website. Errors and prior sale excepted! ABS, automatic reversing system, road approval = Further information = Year of manufacture: 2020 Operating hours: 2,213 Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2016, operating hours: 13,100 h, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: TNC 620, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 3-axis machining center Manufacturer: Spinner Type: VC-450 Year of manufacture: 2016 Control system: Heidenhain TNC-620 Operating hours: approx. 13,100 h Serial number: BV XXXX Technical parameters: ----- • Travel ranges X-Y-Z: 450 x 400 x 400 mm • Work table 770 x 410 mm • Max. workpiece weight: 200 kg • Spindle: 15,000 rpm • Tool magazine: 24 x HSK-A63 • Coolant system 20 bar including internal coolant supply, bed flushing, ..paper band filter with 300L additional tank volume • LED work area lighting • Oil mist extraction • 3D touch probe • Chip conveyor Crsdpfezytzfsx Aktsi • Machine weight: approx. 3.5 t • Dimensions: 2,400 x 1,700 x 2,500 mm Accessories: ----- • Documentation

Condition: used, total length: 1,000 mm, total width: 2,040 mm, total height: 1,710 mm, Year of manufacture: 1999 Colour: Grey Empty weight: 900 kg - Year: 1999 - CE marking present: Yes Crodpfx Ako Afy S Hetoi - Serial number: 126-02049 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 1990 - Table width [mm]: 850 - Max. tool diameter milling head [mm]: 180 - Feeding device present: Yes - Brand: Holz-her - Type: ET117 - Number of wheels [pcs]: 3 - Number of speeds: 8 - Tools (milling heads) included: Yes - Spindle speed: Manual - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 10000 - Spindle speed control: Variable - Voltage [V]: 380 - Current consumption [A]: 12 - Fuse [A]: 16 - Power [kW]: 6.2 - Transport dimensions: 1000mm x 2040mm x 1710mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Crodpfezmukusx Aktoi

Condition: excellent (used), Year of construction: 2008, operating hours: 1,000 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 180 mm, feed rate X-axis: 30 m/min, spindle diameter: 40 mm, total width: 1,900 mm, total height: 1,800 mm, total length: 5,000 mm, overall weight: 6,000 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, workpiece height (max.): 180 mm, jointer table length: 2,500 mm, workpiece width (max.): 240 mm, input voltage: 380 V, table length: 2,500 mm, number of spindles: 6, input frequency: 50 Hz, table width: 240 mm, Equipment: motor brake, 240 mm width 180 mm height 6 spindles 2 lower 2 upper Left Crodsztm Huspfx Aktei Right Electronic adjustment of width and the two upper heads. Chrome table Lower draw rollers Central lubrication Plate lubrication First owner 2008 model year

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 7,300 h, stroke length: 400 mm, operating speed: 140 mm/s, reverse speed: 180 mm/s, oil tank capacity: 350 l, overall weight: 14,800 kg, total length: 6,350 mm, total width: 3,590 mm, total height: 3,220 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 175 t, clearance between the columns: 3,550 mm, distance table to ram: 720 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, EHT VarioPress 175-40, approx. 7300 operating hours, original EHT tooling, straight bending tool 420 mm x 4000 mm, split, forming pad 220 mm x 4000 mm, split, 2 sets of dies, split, pneumatic tool clamping system, top and bottom, automatic crowning, 2 x adjustable material support arms, table/punch distance, min.: 320 mm, Crodpfx Ao Aa Nz Sektji table/punch distance, max.: 720 mm, 3 stop fingers, manually adjustable, 2 sets of upper tools, 1 x forming pad 220 mm, 1 x straight tool 420 mm, original operating manual and electrical diagrams available, annual maintenance and safety inspection carried out, last maintenance in 2025.

Condition: used, Year of construction: 2012, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2012 Control : Siemens 840 D Pre-processing Manufacturer:Index Type:A 200 Year of construction:2012 Control system:Siemens 840 D Crjdpfx Ao Ah Nc Uektei Number of slides:5 pieces Bar feeder:IEMCA Master 880 Chip disposal:Chip conveyor Processing 1 (OP10): Manufacturer:Index Type:MS 40 C Year of construction:2012 Control system:Siemens 840 D Number of spindles:6 pieces Parts handling:Streuli robot Chip disposal:Chip conveyor Coolant supply:IKZ system Processing 2 (OP20): Manufacturer:Index Type:MS 40 C Year of construction:2012 Control system:Siemens 840 D Number of spindles:6 pieces Parts handling:Streuli robot Chip disposal:Chip conveyor Coolant supply:IKZ system Linkage: Robots:Kuka Parts transport:Conveyor belts

Condition: good (used), Year of construction: 1977, functionality: fully functional, - 6 spindles - max. bar diameter: 32.0 mm - guide tubes Cedpez Iz D Isfx Aktjri - chip flushing system - accessories: cams + gears - SEMA bar feeder bundle (1989)

Year of construction: 1994, condition: used, functionality: fully functional, Lathe, including chip tray and emulsion tank with pump, machine accessories: 315 mm chuck, rotating center for tailstock, technical documentation, technical parameters: distance between centers 2000 mm, swing over bed 500 mm, swing over carriage 250 mm, spindle bore 56 mm, maximum workpiece weight 1100 kg, spindle taper M 60, 1:20, tailstock center taper MORSE 5, spindle speed range 11.2-1400 rpm, power 2 x 5.5 kW, machine dimensions (wxd) 1180 x 4420 mm, weight 3260 kg, the machine can be tested by arrangement. Cedpfj Ah S Aujx Aktori

Condition: new, functionality: fully functional, Weinig Hydromat 4300 Credpfx Ako Ah Rrdjtji NEW / UNUSED EQUIPMENT Working Width: 30 – 300 mm (with tool diameter 203 – 250 mm) Working Height: 10 – 120 mm (with tool diameter 203 – 250 mm) 50mm spindles 6,000 RPM Bottom Horizontal Spindle Motor: 75 kW, 6000 RPM. CNC radial adjustment and positioning. Fully automatic straight jointer. Hydro Lock counter-bearing. Top Horizontal Spindle Motor: 75 kW, 6000 RPM. CNC radial & axial adjustment and positioning. Fully automatic straight jointer. Hydro Lock counter-bearing. Right Vertical spindle Motor: 37 kW, 6000 RPM. CNC radial & axial adjustment and positioning. Fully automatic straight jointer. Left Vertical spindle Motor: 37 kW, 6000 RPM. CNC radial & axial adjustment and positioning. Fully automatic straight jointer. Top Horizontal Spindle Motor: 55 kW, 6000 RPM. Segmented pneumatic pressure shoe with MarathonPower coating CNC radial & axial adjustment and positioning. Fully automatic straight jointer AND profile jointer Hydro Lock counter-bearing. Bottom Horizontal Spindle Motor: 55 kW, 6000 RPM. CNC radial & axial positioning. Adjustable and lockable table plates. Table plates with wood insert. Additional pressure shoe with wood insert for ripping operations. Max sawing height 65 mm with 100 mm flange diameter. Fully automatic straight jointer. Rotaplan pressure plate above bottom spindle. Hydro Lock counter-bearing. Feedworks Short 1.5 m infeed table with heavy 4-roller feed system 6x powered top feed rollers 11kW each (250mm). 5x bottom bed feed rollers 11kW each. (121kW total feeding power) Continuously variable electronic feed speed: 30 – 300 m/min. CNC controlled up/down feed movement positioning. Freewheel gearboxes on 4x roller feed system 250mm x 300mm wide Other information Frequency inverter drive for spindle startup/shutdown. Operating Voltage: 400 V (380-420 V range), 50 Hz; Control Panel mounted on a swivel arm. Separate control cabinet located 2.5 m from planer. Air conditioning unit for switch cabinet to prevent inverters overheating. Integration for third-party mechanization. WEINIG Machine Control (WMC): 21.5" multi-touch screen. MarathonPowerCoating PLUS special wear-resistant table coating. Automatic lubricant pump with 30L tank. Remote Support / VPN Diagnosis Network. Internal workpiece monitoring system. Safety Enclosure: Full soundproof/safety housing Slide-away anti-kickback guard for ripping.

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 2,148 h, load capacity: 3,500 kg, lifting height: 3,600 mm, load center: 500 mm, fuel type: electric, mast type: other, battery capacity: 775 Ah, remaining battery capacity: 76 %, battery voltage: 80 V, DGUV certified until: 11/2027, fork length: 1,200 mm, tire condition: 75 %, total height: 2,450 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, full service history, hydraulic fork positioner, lighting, sideshift, · Lifting capacity: 3,500 kg · Lifting height: 3,600 mm · Overall height: 2,450 mm · Year of manufacture: 2008 · Operating hours: 2,148 STILL 3.5-ton electric forklift, good battery, standard free-lift mast, side shift, 4th valve, single-pedal operation, mechanical multi-lever control, lighting compliant with StVZO (German Road Traffic Licensing Regulations), fork length 1,200 mm, charger Price ex works, incl. 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Additional attachments such as fork positioners, rotating devices, extension forks, etc., as well as other fork lengths, are available upon request. Inspection, demonstration, and test drives are available by appointment. Sales are exclusively to commercial businesses. Subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp trailer (transport costs upon request). Csdpfx Ake Ahztceteri You can find more information and offers on our newly designed website!

Condition: used, Year of construction: 1973, Used Machine Year of Manufacture: 1973 Features and Technical Specifications - Table milling machine for profiling, grooving, and rebating with appropriate milling tools - Three speed settings to accommodate different tools and machining operations - Spindle speeds: approx. 2,500 / 4,500 / 6,000 rpm - Milling arbor diameter: 30 mm - Height adjustment of the milling spindle: approx. 70 mm Codpfxezy Dzve Aktori - Milling stop ruler with fine adjustment for tool diameters up to 250 mm - Weight: approx. 385 kg - Caution: The machine does not have a motor brake! - Availability: available shortly

Condition: used, Year of construction: 1988, tilting spindle: Ja -5 bis 45° height adjustment: elektrisch tilting adjustment: elektrisch fence adjustment: manuell height indicator: digital tilting indicator: digital Codpfx Aszq Dc Ijktori fence indicator: Scala spindle diameter: 30 mm speeds: 3000, 4500, 6000, 8000, 10000 motor power: 6 kW motor brake: Ja, automatisch sustion connection: 2 x 120mm machine length: 1200mm machine wide: 1400mm weight: 1100kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, DMG Gildemeister GMC20, manufactured in 2010 • Siemens 840D Powerline control system • Six spindles plus 6-2 backworking • All front spindles with X, Z, and W axes • Hainbuch SZ9012B2 collet chucks on the front, equipped with Hainbuch collets in sizes 6 mm, 10 mm, 12 mm, 14 mm, 16 mm, 20 mm, and 24 mm; bar feed accessories included • 9012 ETPU special collet chuck installed on the rear. Various sizes from 3 mm to 22 mm included • HP cutting oil supply • Front tool stations with 30-degree taper on all six spindles. 25 holders included • 15 turning tool holders with 12x12 cross-section • 4 round tool holders with 16 mm diameter • Double “X” axis driven tool holder for use in position 5 • Single “X” axis driven tool holder for use in position 4 • Single “Z” axis driven tool for use in 6-2 backworking • Iemca SIR 25P bar feeder Csdpfxj Adp H No Aktori • Part ejector, collection device, conveyor belt, and collection container • Losma Filtermist • Kraft & Bauer fire extinguisher

Condition: good (used), Code: 0512 Brand: CASOLIN - ITALY Model: F 45 KL - CE STANDARD Crsdpfx As Ahrhqjktei Automatic spindle moulder with tilting spindle (-10 to +45°), extended tables and automatic feeder, for joinery, furniture, custom-made furniture, window and door frames, doors, panels, sawmills, plastics and various – CE Standard Spindle diameter 35 mm Motorised spindle lifting Motorised spindle tilting (-10 +45°) Decimal display for spindle height Digital display for tilting Digital display for speed Precise worktable adjustment system by handwheel positioned on the front of the machine Extended worktables (2550 mm) with a removable support for large workpieces Spindle head movement by prismatic guides: high positioning accuracy Micrometric adjustment of the feed table with millimetre scale Quick locking and unlocking operations for spindle head positioning Spindle rotation reversal Useful spindle length 140 mm Vertical stroke 155 mm Motor power 7,5 Hp Worktable height 900 mm N° of speeds rpm 3000/4500/6000/8000/10000 Aluminium guides HERMETIC N° 2 suction inlets diameter 120 mm Automatic 4-roller feeder MAGGI Overall dimensions mm 2550 x 1200 x 1600 h Weight kg 920

Condition: used, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Year of manufacture: 2001 Colour: Grey Credpfjymlahox Aktsi - Details: - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - CE marking present: Yes - Serial number: AB/143039 - Spindle diameter [mm]: 40 - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes - Tool key included: Yes - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm Cjdpfxsztxt He Akteri - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty.

Condition: good (used), Year of construction: 2018, Further details will be provided via email upon request. Csdpfx Aks Af U Dcstsri

Condition: used, Year of construction: 1963, Rigid milling machine Year of manufacture: 1963 Codpfxjzk N Iis Aktjri Spindle diameter 30 mm Availability: at short notice Storage location: Röllbach

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, _KRAUSSMAFFEI KM 1300 MX – SP 8100_ _Screw Ø105 mm_ _CLAMPING UNIT_ • Clamping force: 13,000 kN / 1,300 t • Mold opening force: 910 kN • Moving platen force (open/close): 159 / 153 kN • Platen dimensions: 2,150 × 1,910 mm • Tie bar distance (H × V): 1,550 × 1,250 mm • Opening stroke: 2,350 mm • Mold height (min./max.): 700 / 1,400 mm • Maximum daylight: 3,050 mm • Ejector stroke: 350 mm • Ejector force (forward/backward): 250 / 125 kN • Optional mold height (min./max.): 950 / 1,650 mm • Daylight with increased mold height: 3,300 mm _INJECTION UNIT – SP 8100_ • Screw diameter: 105 mm • L/D ratio: 23 • Max. injection pressure: 1,778 bar • Stroke volume: 4,546 cm³ • Shot weight (PS): 4,137 g • Injection flow rate: 805 cm³/s • Screw speed (nominal/max.): 126 / 159 rpm • Plasticizing rate PS (nominal/max.): 147 / 187 g/s • Plasticizing rate PE (nominal/max.): 116 / 147 g/s • Nozzle contact force: 166 kN _ELECTRO-HYDRAULIC EQUIPMENT_ Cedpfoztpkpox Aktori • Pump motor power: 110 kW • Installed heating capacity: 59 kW • Barrel heating zones: 7 • Dry cycle rate (Euromap 6): 761 cycles/h • Dry cycle time (Euromap 6): 4.7 s • Oil tank capacity: 1,500 l _DIMENSIONS & WEIGHT_ • Net weight incl. cabinet: 77 t • Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m • Maximum mold weight: 29,000 kg _ELECTRIC SCREW DRIVE_ • Screw drive power: 117 kW • Screw speed (nominal/max.): 123 / 193 rpm • Plasticizing rate PS (nominal/max.): 144 / 226 g/s • Plasticizing rate PE (nominal/max.): 114 / 178 g/s _ACCUMULATOR (ZE)_ • Injection flow rate: 1,732 cm³/s _EQUIPMENT_ • Removable tie bar (retractable tie bar) • Euromap 67 – robot interface • 48 hot runner controllers • 8 pneumatic cascades • 6 hydraulic cascades • 2+2 cores • MC6 control panel _PROCESSED MATERIALS_ • PP, PC

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Type of control: Digital Control: Digital Storage location: Halberstadt Country of origin: Germany Crodpfjy Ed Atex Aktei Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Cjdpfx Aezt Ai Eskteri Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation