Used Stage Press for sale (15,001)

Condition: ready for operation (used), Mechanical spindle press / four-column press - Four-column press - Pressing force approx. 40 tons Dimensions: L x W x H 1.5 x 1.5 x 2.0 meters / Weight 1000 kg Ndsdpjzta Tusfx Afusb Errors and omissions excepted.

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option Ndodpfx Afjzk Eqmoujb - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Nodpfx Aszb Aivjfuodb Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: new, pressure 20,0 t stroke 185 mm Ndedpsxaapcsfx Afueb table surface area 170 mm Breite column travel between the guideways 510 mm weight of the machine ca. 112 kg dimensions of the machine ca. 1630 x 560 x 730 mm Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump - Robust construction with welded steel frame

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 82225, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 100 t, stroke length: 200 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, table width: 160 mm, throat depth: 250 mm, clearance between the columns: 2,050 mm, oil tank capacity: 200 l, total length: 3,000 mm, total width: 1,700 mm, total height: 2,400 mm, overall weight: 6,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake HACO ERM 25100 Year of manufacture: 2005 100Tx2500 Light barrier: Fiessler AKAS Ndedpfx Aoz Er E Defuob Tool holder: AMADA Promecam Typ A tool holder Backgauge: Controlled X-R-Z1-Z2 axes New 2026 control system! Immediately available! Can be viewed under power!

Condition: used, Year of construction: 2011, functionality: fully functional, operating hours: 1,000 h, input voltage: 380 V, type of input current: three-phase, pressing force: 1,200 t, stroke length: 600 mm, table width: 3,000 mm, table length: 2,000 mm, table height: 700 mm, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 700 mm, oil tank capacity: 700 l, total length: 2,000 mm, total width: 3,000 mm, total height: 4,200 mm, overall weight: 60,000 kg, control cabinet height: 2,000 mm, control cabinet width: 400 mm, distance between stands: 2,200 mm, Equipment: safety light barrier, H-frame, 4 columns, daylight 700 mm, stroke 600 mm, distance between columns 2200 mm x 1260 mm, dimensions (LxWxH) 3000x2000x4200 mm, 380V-15kW, weight 60,000 kg Njdpfexn Rvcox Afuedb

Condition: used, functionality: fully functional, year of last overhaul: 2023, Sennerskov through-feed hot press. In good condition, with new pressure cylinders installed. The unit can be connected to a heating pipeline, which helps keep operating costs reasonable. Dimensions of the product to be laminated: Max width: 1000 mm Max thickness: 170 mm Ndsdpfxez D Ayce Afusb Max length: 2200 mm Infeed conveyor dimensions: Width: 1100 mm Length: 2650 mm Height: 930 mm Weight: approx. 1000 kg Outfeed conveyor dimensions: Width: 1160 mm Length: 2550 mm Height: 860 mm Weight: approx. 1000 kg Press dimensions: Width: 2150 mm Length: 2300 mm Height: 1600 mm Weight: 6000 kg

Condition: like new (used), Year of construction: 2009, functionality: fully functional, operating hours: 4,000 h, input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, type of input current: DC, pressing force: 160 t, stroke length: 150 mm, operating speed: 50 mm/s, reverse speed: 10 mm/s, table width: 1,300 mm, table length: 2,500 mm, table height: 150 mm, throat depth: 1,300 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 200 mm, clearance between the columns: 2,500 mm, retraction force: 100 t, oil tank capacity: 50 l, total length: 3,500 mm, total width: 4,500 mm, total height: 2,300 mm, overall weight: 6,000 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, We offer this Dimter Profitest 2500 gluing press in like-new condition, manufactured in 2009. Manufacturer: Dimter Model: Profitest 2500 Year of manufacture: 2009 Condition: like new Nedpfx Aozin Aiefujdb Type: gluing press If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Njdodzqltjpfx Afusdb Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Ndedpfx Afecmat Usuob Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Njdpfx Aou Axfcsfusdb Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop Ndsdjz Duhxepfx Afusb The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Items for sale: 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Ndjdpfx Afjzxwypeujb Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2009, functionality: fully functional, pressing force: 60 t, filling opening width: 1,000 mm, filling opening length: 1,450 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, total width: 2,500 mm, total height: 3,500 mm, total length: 9,255 mm, overall weight: 14,000 kg, warranty duration: 12 months, transport height: 2,587 mm, transport width: 2,500 mm, transport length: 6,645 mm, Equipment: documentation/manual, For sale is a bale press, model EP 6000 V5, manufactured in 2009. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the demands of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, sliding guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the bale tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Ndsdpjzgf Hgjfx Afuob Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We would be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 19439, pressing force: 38 t, type of input current: three-phase, input voltage: 400 V, input current: 32 A, pressure: 200 bar, oil tank capacity: 80 l, year of last overhaul: 2023, operating pressure: 200 bar, input frequency: 50 Hz, Avermann AVOS SP-12 stationary baling container | Overhauled in 2023 | Not used since For sale: Avermann AVOS SP-12 stationary baling container, year of manufacture 2014. This reliable Avermann baling container was overhauled by us in 2023 and has not been used since the overhaul. As a result, this is an interesting machine for anyone looking for a well-maintained used baling container that can be put back into operation immediately. Nodpfx Afjz Enubouodb The AVOS SP-12 is a robust baling container, suitable for compacting various waste streams and ideally applicable in industries, logistics companies, manufacturing companies, and waste processing plants. Technical data: Brand: Avermann Type: AVOS SP-12 Year of manufacture: 2014 Serial number: 19439 Power: 7.5 kW Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic pressing unit Large feed opening Suitable for transport with a hook lift Specifics: The machine was overhauled by us in 2023. After this overhaul, the baling container has not been used and has been idle since. The machine is in good used condition visually. There are, of course, some minor signs of wear and tear that are consistent with the age and type of machine. A great opportunity for companies looking for a professional Avermann baling container at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, AVOS, SP-12, baling container, waste compactor, container compactor, waste compaction, recycling, compactor, pressing unit, self-compacting container.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: E16352-1, Avermann AVOS SP-12 stationary baling press | Overhauled in 2023 | Not used since For sale: Avermann AVOS SP-12 stationary baling press, manufactured in 2010. This robust Avermann baling press was overhauled by us in 2023 and has not been used since. This makes it an interesting machine for those looking for a well-maintained used baling press that can be put back into operation immediately. The AVOS SP-12 is a robust baling press, suitable for compacting various waste streams and ideally applicable in industries such as manufacturing, logistics, production companies, and waste processing. Technical specifications: Nedpfx Afez Eqr Aouedb Brand: Avermann Type: AVOS SP-12 Year of manufacture: 2010 Serial number: E16352-1 Power: 7.5 kW Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic press system Large feed opening Suitable for transport with a hooklift Special features: The machine was overhauled by us in 2023. After this overhaul, the baling press was not used and has remained idle since. Visually, the machine is in good, used condition. There are, of course, some minor signs of wear that are consistent with the age and type of machine. A great opportunity for companies looking for a professional Avermann baling press at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, AVOS, SP-12, baling press, waste compactor, container press, waste compaction, recycling, compactor, press system, self-compacting container.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the “Minolta bizhub PRESS 2250P.” Items for sale: 1 x Minolta bizhub PRESS 2250P with the following features: Includes internal controller Includes LS-506/RU-510/PI-PFU finisher Includes paper deck Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 7,836,379 pages Ndjdpfxszl S Tqs Afujb Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, you’re welcome to contact us directly.

Condition: used, Year of construction: 1986, Colour: Green Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. Ndodpfx Aowng S Aofueb With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Main motor power [kW]: 7.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Max. workpiece height [mm]: 120 - Total stroke [mm]: 150 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 10 - Cylinder diameter [mm]: 130 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 16632, pressing force: 34 t, overall weight: 18,200 kg, tank capacity: 60 l, type of input current: three-phase, input voltage: 400 V, electrical fuse: 25 A, empty load weight: 6,200 kg, Husmann 22 m³ compaction container with tilting mechanism | Geesink connection | Hook and cable For sale: Husmann compaction container with a capacity of 22 m³, equipped with a hydraulic tilting mechanism with a Geesink connection. This robust compaction container is suitable for professional use in various sectors, including waste collection, industry, logistics, production, and recycling. Thanks to the integrated tilting mechanism, containers can be easily emptied mechanically into the compaction container. The machine can be attached to the front using either a hook or a cable. The container is also equipped with a connection at the rear, but this side is only suitable for hook attachment. This makes the compaction container versatile and compatible with different transport systems. Technical specifications: Brand: Husmann Capacity: 22 m³ Machine number: 16,632 Year of manufacture/refurbishment: 2017 Power supply: 400 V Nodpfoz Ep Upjx Afuodb Power: 5.5 kW Fuse: 25 A slow-blow Weight: approx. 6,200 kg Load capacity: 12,000 kg Color: RAL 7016 Hydraulic tilting mechanism with Geesink connection Front: hook and cable attachment Rear: hook attachment Large intake opening Heavy-duty industrial design Condition: The compaction container has been used and shows clear signs of wear, consistent with its age and use. The machine has not been cosmetically refurbished but is still functional and ready for use. The robust Husmann construction, large capacity of 22 m³, and integrated tilting mechanism make this an interesting machine for companies looking for a functional compaction container at an attractive price. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Husmann, compaction container, 22m3, 22 m³, waste compactor, container compactor, tilting mechanism, Geesink, Geesink connection, lifting tilting mechanism, hook attachment, cable attachment, waste compaction, recycling, compactor, waste container.

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure Njdpfxezu Aibs Afuedb - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 24559, pressing force: 34 t, total width: 2,400 mm, total length: 6,500 mm, total height: 2,400 mm, overall weight: 4,635 kg, filling opening length: 1,000 mm, filling opening width: 1,900 mm, power: 5.5 kW (7.48 HP), Well-maintained waste container Husmann SPB20SEN Nsdpfx Ajz En Dpofusdb Lifting and tilting mechanism for 660-liter roll-on/roll-off containers Lifting and tilting mechanism with increased height for a 1,200 mm high platform Discharge flap

Year of construction: 1992, condition: good (used), Control system upgrade in 2022 to CYBELEC VisiTouch Pac Press force: 200 t Nodpfx Aoim R N Hofuedb Bending length: 3050 mm Frame width: 2550 mm Control system: CYBELEC VisiTouch Pac Ram stroke: 524 mm Machine weight approx.: 17,000 kg Equipment: - Control system upgrade in 2023 to CYBELEC VisiTouch Pac - Controlled axes: Y1, Y2, X, R, crowning - Hydraulic ram clamping - Hydraulic die clamping - 4-stage pneumatic die adjustment

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance Njdpfxjzktg Aj Afuedb • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Njdpfxjyxp Two Afuodb Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Dear Ladies & Gentlemen, We are offering a XEROX Colour Press C550 with CREO CX560 Print Server (Activation dongle for monitor, keyboard and mouse is included, the accessories themselves are not included!), i1 Spectrophotometer, A3+/SRA3 High Capacity Feeder with 1 Tray & Professional Booklet Maker Finisher for sale. Ndsdpfx Afozrulpjuob OPTIONAL: As an alternative to the CREO Print Server we can also attach an integrated FIERY EX-i 560 controller to this machine at the same price. Please ask for the FIERY in this case. The machine will be delivered with either CREO Print Server or FIery Controller. Counter: ONLY 1.730.992 prints total This machine was fully and professionally checked in the seller's workshop and is in excellent condition with perfect print image quality. Please contact us with questions! We will be happy to help you!