Used Stahlfolder Ti 52 for sale (11,284)

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Machine configured for folding up to 16 pages. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm Kdjdpfx Ajz Dta Hop Deu High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Inverter-controlled folding speed adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4 Folding Machine Machine in very good condition, ready for operation. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 Ksdszlgc Tjpfx Ap Djdu – 4 cassettes on the second module 2.Ti-52 – Mobile delivery Infinitely variable folding speed control via inverter Cassette noise reduction Compressor included Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. Made in Germany.

Condition: ready for operation (used), Year of construction: 2003, 4 cassettes 1 knive Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – Mobile delivery Inverter-based, smooth folding adjustment Cassette noise reduction Becker compressor Double sheet sensor Kjdpfx Aexnb N Hjp Dedu Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts and tools

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, STC-Ref: G-062-4939 Stahl Ti-52/4-KBK-Fi-52, Year: 2000 equipped: Kdodpfxez Rw Uvj Ap Dou - Tri Creaser - Paper weights: 40–250 g/m² - Knife folding unit KBK 52, 1 knife/Messer - working width max. 520 mm - folding length min. 4 cm - Output max.45.000 strokes/hr. - 1st folding unit: 4 buckle plates - noise hoods - shingle delivery - cross fold unit - perforating device - Max. format: 520 × 840 mm - Min. format: 100 × 150 mm - flat pile feeder Fi-52 --> available: 12/2026

Condition: good (used), Year of construction: 2004, functionality: fully functional, - Manufacturer: Stahl Kdsdpexby E Hsfx Ap Dsu - Model: TI 52 - Machine type: Folding machine - Maximum sheet width: 52 cm - Typical application: Folding small to medium format printed sheets - Features: robust, versatile, compact design - Fields of application: commercial printing houses, bookbinderies

Year of construction: 1991, condition: good (used), machine/vehicle number: 44070/91-180102, 4 Pockets 1 Folding Knife Kodpfx Apeg I I N Io Dsdu

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: M205M410, working width: 230 mm, planing height: 160 mm, planing width: 230 mm, working height: 160 mm, overall weight: 3,800 kg, workpiece height (max.): 160 mm, type of input current: three-phase, workpiece width (max.): 230 mm, input voltage: 400 V, number of spindles: 5, input frequency: 50 Hz, For sale is a professional four-sided planer WINTER TIMBERMAX 5-23. The machine was only used sporadically for our own production and was not operated in continuous multi-shift operation. Technical data: - Manufacturer: WINTER Holztechnik GmbH - Model: TIMBERMAX 5-23 - Year of manufacture: 2017 - Serial number: M205M410 - 5 spindles - Processing range: 20–230 x 8–160 mm Ksdpfx Ajz Rpd Aop Dsdu - Feed rate: 6–36 m/min - Supply voltage: 400 V - Frequency: 50 Hz - 3-phase - Maximum power: 37.43 kW - Weight: approx. 3,800 kg - CE marking - Also suitable for processing damp wood The machine is fully functional. The machine is located in Poland, 64-920 Piła. An inspection and demonstration of the machine is possible by prior appointment. Further photos, technical documentation and a video of the machine in operation can be provided upon request.

Condition: used, Year of construction: 1986, Format: 520 mm Equipment: Exchangeable casettes format change system Kjdpfx Apozywcgs Dedu Perforation unit for Business forms Remaliner finishing options: Roll to Fold, Roll 3 Offset units 3 x 22 Zoll printing unit inserts

Condition: used, Year of construction: 1989, Format: 520 mm Equipment: Exchangeable casettes format change system Perforation unit for Business forms Remaliner 3 finishing options: Folded, Sheet and Reel 6 Offset units Kedpfjzywcmsx Ap Dsdu 6 x 24 Zoll printing unit inserts 2x UV R/V dryer

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Kjdjzuhbispfx Ap Dodu Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Year of construction: 2015, condition: ready for operation (used), A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible. Kdodpezf Ncpjfx Ap Dsu

Condition: like new (used), Year of construction: 2021, operating hours: 4,393 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 670 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, NEW: EMCO EMCOTURN E45 (year 2021) CNC lathe – FANUC 0i-TF, 4,393 hours, like new! Includes a parts collection device for removing finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of manufacture: 2021 • Serial number: S4E213351 • Control system: FANUC 0i-TF incl. manual control wheel • Operating hours: 4,393 hours (see image 263.599 minutes = 4,393 hours) • Machine type: Single-spindle lathe with parts collection device • Number of tool positions: 12-position VDI-30 axial turret with two hole circles • Condition: like new, fully functional • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Further pictures and videos of the running machine will be sent upon request. _____ Kodpfx Apozkhuhe Dedu Item description For sale is a high-precision CNC turning center, EMCO EMCOTURN E45, manufactured in 2021, with low operating hours of only 4,393 and in very good condition. Special features: • Control system: Modern FANUC 0i-TF control system for easy programming, including handwheel. • Parts collection device: The parts collection device (parts catcher) of the Emco Emcoturn E45 carefully transports finished workpieces out of the working area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-position axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical data: Working area and travel distances: • Swinging diameter over bed: 430 mm • Swinging diameter over cross slide: 300 mm • Distance between centers (spindle nose - tailstock center): 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travel (X / Z): 160 / 510 mm Main spindle and drive: • Speed range: 0 – 6,300 rpm • Main spindle drive power: 13 kW • Torque at the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-position VDI-30 axial turret with two hole circles • Mounting shank according to VDI (DIN 69880): VDI 30 • Tool section for square tools: 20 x 20 mm • Shank diameter for drilling bars: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse speed (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positioning accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of delivery & terms of sale: • CNC lathe EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included. • FANUC operating manuals and machine documentation • Loading by forklift on site is included. The machine is immediately available and can be inspected and tested under power after prior arrangement. Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 837172, total width: 1,300 mm, total length: 2,040 mm, total height: 1,560 mm, outer diameter of label roll: 300 mm, inside diameter of label roll: 76 mm, input voltage: 230 V, Top and bottom labeling machine 652C Machine direction of travel: from left to right, as viewed from the operator side - Equipped with the HERMA Eco labeler Labeling speed of 30 m/min - Side belts, approximately 350 mm long, for stabilizing and guiding the products - with mechanical unwinder, electromechanical label sensor FS03, release edge, and mechanical rewinder Further information available upon request We regularly have other demonstration machines available. We would also be pleased to invite you to our showroom to familiarize yourself with the machines during a visit or live demonstration. Please feel free to bring your own products so that we can demonstrate the application in a practical manner under your specific conditions. Kdsdpfx Apsz R Uv Sj Dju

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 17370, functionality: fully functional, TIGER 352 SX EVO - SEMI-AUTOMATIC HIGH-CAPACITY > The robust cast iron frame absorbs vibrations and ensures consistent cutting quality as well as a longer service life for the saw blade. > The two-stage gearbox ensures high cutting performance and rigidity. > The pneumatic vertical vice ensures efficient and secure clamping, even when cutting pipes. Kodpfx Asy T Eh Tsp Djdu > The control panel, equipped with a thermal relay and minimum voltage coil, guarantees the highest level of protection. In combination with an automatic pusher stop and label printing, the machine is the optimal solution for sawing your reinforcing steel in PVC window construction. The machine is still in use until June. It can be inspected at the customer's site in 49811.

Condition: good (used), Year of construction: 2020, PLC controller, central assembly, RAM, CPU, central processing unit, central device Kdjdpoxxvblefx Ap Dsu -Manufacturer: Siemens, SIMATIC S7-1500 CPU 1515-2 PN -Type: 6ES7 515-2FM02-0AB0 -CPU: 1515-2 PN -Quantity: 3x assembly available -Price: per piece -Dimensions: 125/70/H155 mm -Weight: 0.5 kg/pc.

Condition: good (used), Mobile delivery for folding machine Heidelberg SAK-66 Fully operational, ready for production. Kodpfxo Aaw T Ao Ap Dsdu Manufactured in Heidelberg, Germany. Brand new belts. Can be connected to any Heidelberg folding machine, with smooth delivery speed adjustment. Height and angle adjustment.

Condition: ready for operation (used), Year of construction: 2004, Double sided edgebander manufactured in 2004. This HOMAG OPTIMAT KFR 526/10/A3/35 features a robust design suitable for various applications. It operates at a voltage of 400 V and has a load capacity of 250 A. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG OPTIMAT KFR 526/10/A3/35 machine we have for sale. Contact us for further details. Kdedjz Ah Ixjpfx Ap Dou - Voltage: 400 V- Frequency: 50 Hz- Phase: 3~+N- Control Voltage: 24 V- Nominal Current: 190 A - Main Fuse: 250 A

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing Kdodjxdr Rtspfx Ap Dsu - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: excellent (used), Offer includes: Ti52 with 6 pockets, 2nd station with 4 pockets, Tremat feeder, very good condition, year of manufacture 2009, including SAK-52 stacking device, VFZ52 available as an option. Kdedpjzmp Nrefx Ap Deu

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 126375/99-274723, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 31.12.2025! The offer includes: Stahl Zi52/4-Fi52 (year of manufacture: 1999; serial number: 126375/99-274723) Stahl KBK 52 (year of manufacture: 1999, serial number: 121492/99-271702) The folding rollers of the machine have been replaced. The machine is manually adjustable. Kdsdexyfmaspfx Ap Dsu

Condition: used, Year of construction: 2017, Four-sided planer Kjdpfjzy Nx Hjx Ap Djdu Manufacturer: WINTER Holztechnik Type: Timbermax 5-23 Year of manufacture: 2017 Technical data - Number of spindles: 5 - Processing range: 20-230 x 8-160 mm - Feed rate: 6 - 36 m/min - Suitable for processing wet wood - Weight: approx. 3,800 kg - CE marked Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2001, MB Baeuerle Multipli CAS-524 flat pile feeder 4 buckle plates noise reduction hoods delivery conveyor belt Kjdpfx Aoh Ighhep Djdu

Condition: like new (used), functionality: fully functional, EWM acticARC Tetrix T352 AC/DC robotic TIG welding machine with cooling unit Very good condition Used very little Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. Ksdpfxjzl Ac Ao Ap Dodu The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping within Germany is possible for €100 gross. Shipping costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify the country, city, and postal code. Freight costs on request – please specify the delivery address.

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. Kdodpfeyalqyjx Ap Dju multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Kdjdpfx Aeyzumzsp Dou Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse