Used Stanchion for sale (378)

Condition: used, maximum load weight: 31,050 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2009, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2009, Schwarzmüller flatbed semi-trailer plus Kennis roll-on/roll-off crane, type 16,000 with hydraulic supports ----* Manufacturer: Schwarzmüller * Type: Flatbed semi-trailer plus Kennis roll-on/roll-off crane, type 16,000 with hydraulic supports * First registration: 02/2009 * Gross vehicle weight: 39,000 kg * Unladen weight according to vehicle registration document: 7,950 kg * Payload: 31,050 kg * Axles: 3 x Mercedes, with 1st axle as a lift axle / 3rd axle forced steering * Suspension: Air suspension with raising and lowering function * Tires: 385/65 R 22.5, approx. 50% tread * Internal dimensions of the flatbed: approx. 13.50m long x 2.48m wide x 1.00m high * Color: Chassis black, side panels yellow * EBS * Kennis roll-on/roll-off crane, type R-16/7.10, year of manufacture 2009, with hydraulic supports * 3 hydraulic outriggers * Max. lifting capacity at 7.10m = 2,100 kg * Lifting capacity with short arm at 3.50m = 4,500 kg * 5th and 6th control circuits * Elevated platform with joystick control * Hatz diesel engine with silent pack * Container locking devices for 20 ft or 40 ft containers * 5 split aluminum side panels Hodpegt Si Tefx Agkjp * Rear tailgate * Rear left access ladder * Removable stakes * Perforated rails on the left and right for load securing * Floor: wood/steel * 2 toolboxes on the left * 1 toolbox on the right * Individual fenders * Full load support * Reversing lights * Spare wheel holder * Pallet forks available at an extra charge

Condition: used, maximum load weight: 32,120 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2014, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 100 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2014, Equipment: ABS, SDP 27, LASI EN 12642 Code XL Mileage 282,371 km Construction inside / outside: * Sliding tarpaulin left + right * Quick release front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height at front approx. 3,000 mm * Lifting roof * Perforated outer frame (Multilock) * Pallet stop right and left * Screen-printed floor for 7,100 kg forklift axle load * 32 aluminum insert slats * 3 pairs of sliding stanchions, movable * Rear portal doors with double locks * Access ladder * 2 x storage box * Reversing light * Rear fog light Chassis / other equipment: BPW Eco Plus axles * Brake approx. 80% * Air suspension * Raising and lowering Hodpfx Aomu Dy Djgkjp * ABS, EBS * Tires 445/45 R 19.5 * Remaining profile approx. 1st axle 7 - 9 mm, 2nd axle 6 - 7 mm, 3rd axle 7 mm ---- Offer subject to change from the Bocholt location, subject to prior sale and errors. Sale only to businesses or export.

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Hedpfx Agovy Tvtjkop Further information New: No

Condition: new, maximum load weight: 8,770 kg, Year of construction: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with many extras Equipment includes: - 2 spring-assisted lifting devices for 400 mm high steel side walls - Reinforced and certified construction according to EN 12642 XL load securing certificate - 10 UVV lashing rings integrated into the existing external frame hole pattern - Additional wooden floor in clamped design Hjdpfoxcxmfex Agkop - Tyres: 235/75R17.5 - Four BPW axles instead of GIGANT - Platform extension by 870 mm, total length 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg payload capacity Paintwork: - Wheels: silver - Chassis/front wall/drawbar/rear wall/stanchions/ramps: hot-dip galvanized - Axles/springs: black - Side walls: RAL2011 deep orange We are happy to offer you suitable financing, hire purchase or leasing options. Delivery or shipping by arrangement. We always have a selection of new machines in stock, as well as demonstration units. Contact us today! We rent vehicles and machines with or without operator. A wide range of used machines and equipment always available. Technical changes, errors and prior sale excepted.

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, The tractor unit and trailer can also be sold separately upon request. Mercedes Arocs 2546 6x4 HAD (Vehicle Number: 11765) L-cab StreamSpace driver’s cab, 2.30 m wide, 170 mm engine tunnel * Driver’s cab suspension, comfort, air-sprung * Rear cab wall without window * External storage compartment flap, left * Exterior sun visor, transparent * Air horn * Rotating beacon * Central locking system * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Reversing camera * Automatic climate control * Residual heat utilization * Additional water heating, cab * Electric stationary air conditioning * Construction site air filter * Storage compartment lids, driver and passenger side * Drawers under bed & under window ledge * Overhead storage compartments above windscreen * Electrically operated tilting roof * Refrigerator, drawer type, under bed ----Electric and electronics: additional 12 V/15 A socket, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, right sidewall storage * Additional functions for bodybuilder * 15-pin trailer socket, 24 V * Reverse warning system ----Safety and assistance systems: Stability control assistant * Anti-roll assistant * Lane keeping assistant * Distance assistant * Attention assistant * Active Brake Assist 4 * Driver airbag * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine: OM470, I6, 10.7 L, 335 kW (455 hp), 2200 Nm * Euro VI D engine spec (Truck) * High performance engine brake * Two-cylinder air compressor * Insect protection grille, in front of radiator * Regulated water pump ----Drivetrain: twin-disc clutch * Transmission: G 281-12/14.93-1.0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: leaf/air suspension * Steerable and liftable trailing axle * Drawbar coupling with Doumatik ----Palfinger M10L80 YCrane on 2 LK: * 2 hydraulic outriggers * 4 adjustable timber stanchions (ECCO ALU 4) * Logging seat * Timber grab * Year of manufacture: 2019 * Operating hours: 4,459 h * Next inspection: Technical data * Front axle tyre size: 385/65R22.5 * Rear axle tyre size: 315/80R22.5 * Fuel tank: 510 l * AdBlue tank: 60 l * Permissible gross weight: 26,000 kg * Curb weight: 13,630 kg * Permissible towing capacity: 35,000 kg * Overall length: 10,200 mm * Safety inspection due: 05/2026 -----Janzen System T19 tandem timber trailer (Vehicle Number: 11676) * 4 adjustable stanchions ECCO ALU 4 * Wabco SmartBoard * SAF axles with disc brakes Hedpfxsx Tylgs Agkop * First registration: 01.11.2019 * Total length: 7,650 mm * Perm./tech. gross weight: 18,000/19,000 kg * Curb weight: 2,950 kg * Tyre size: 385/65R22.5 * MOT: 11/2026 * Safety inspection: Vehicle number: 11675+1167----Subject to errors and prior sale----Advertising and lettering have been digitally removed.----We are happy to assist you with all necessary formalities involved in the purchase of a vehicle. Simply let us know your requirements and suggestions and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV/safety inspections * Complete export processing * Arrangement of financing * Application for export number plates * Vehicle transfer * Vehicle registration * Vehicle recovery and transport ----YOUR VTS TEAM

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2013, Equipment: ABS, * Air suspension * SAF axles Hjdpswtaz Ijfx Agkop * Stanchions * Twist-locks for containers * Unladen weight: 8,390 kg -----Internal vehicle number: 11009----Errors & prior sale excepted. WhatsApp support available! If you have questions about the vehicle or need further information, please feel free to contact us via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic.

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside Hedpfx Agolthguskep * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: used, mileage: 44 km, power: 125 kW (169.95 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,215 mm, next inspection (TÜV): 11/2027, color: white, driver cabin: other, emission class: euro6, number of seats: 3, loading space volume: 25.9 m³, loading space length: 4,850 mm, loading space width: 2,260 mm, loading space height: 2,280 mm, number of beds: 1, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, soot filter, traction control, Navigation via mobile phone possible. High tarp, wind deflector, fresh water tank on the right, 9-speed automatic transmission, air conditioning, central locking with remote control, electrically adjustable and heated exterior mirrors, electric front windows, onboard computer, multifunction display, cruise control, multifunction leather steering wheel, rear parking assist, external storage compartment, spare wheel in running gear, summer tires, light and rain sensor, high beam assistant, LED daytime running lights, fog lights, radio with large display and Bluetooth hands-free system, touchscreen, USB interface, Apple CarPlay, Android Auto, long wheelbase, sleeper cab with auxiliary heating, heat-insulating glazing, storage package, tachometer, driver airbag, anti-lock braking system (ABS), traction control (ASR), comfort seats, center armrest, height-adjustable driver’s comfort seat with armrest and lumbar support, start/stop function, particulate filter, full service history, sleeping area, immobilizer, headlight range adjustment, sleeping option, side marker lights, outside temperature display, power steering, loading area for up to 10 Euro pallets, sliding curtain on the right, central stanchions, storage box left and right, overhead storage above windshield, permitted gross weight 3.50 t, front mud flaps, shift point indicator, interior pollen filter, multifunctional double passenger seat, overhead storage, electronic brake force distribution, brake assist, height-adjustable steering column, electronic stability program (ESP), generator 185 A, body/build: flatbed with tarpaulin and sleeper cab, wheelbase 4,215 mm, drive type: front-wheel drive, over 150 transporters and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank, or Auto Europa Bank; we are happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed features may need to be checked separately. Modifications, errors, and prior sale reserved. Delivery available at extra cost. Export license plates available on site. Trade-in of your old vehicle possible. Retrofitting of: - Tow bars up to 3,500 kg possible - Auxiliary heaters - Screen for reversing camera and/or navigation via mobile (Android Auto) - Reversing system with rear camera - Workshop fittings - Cruise control - Retrofit of tail lift (LBW) and further individual solutions for your business needs available at additional cost. Hodsx E U I Hepfx Agkop

Condition: excellent (used), functionality: fully functional, empty load weight: 7,664 kg, maximum load weight: 20,336 kg, overall weight: 28,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 600 mm, suspension: air, Hüffermann HPA 24.88 / Multifunctional turntable trailer / Air suspension • Manufacturer: Hüffermann • Type: HPA 24.88 • Year of manufacture: 01.2009 Hjdpfsy Tw Irsx Agksp • Air-to-air suspension • Platform dimensions: Length: 8.80 m x Width: 2.50 m • Platform height: 0.60 m • Telescopic, manually adjustable, and removable supports for long materials • Stanchion height 2.90 m from the platform – removable • Container/support dimensions: Length: 6 m x Width 2.30 m • Turntable design • Air suspension, manually adjustable for raising and lowering • Hook attachment for ramps • Multifunctional trailer for: container transport, long materials, construction machinery, etc. • 40 mm drawbar eye • Duomatic coupling • Unladen weight: 7,664 kg • Payload: 20,336 kg • Gross weight: 28,000 kg • German machine • Immediately ready for use • This offer is non-binding and without obligation. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, maximum load weight: 31,505 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2014, next inspection (TÜV): 03/2027, loading space length: 13,670 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, Year of construction: 2014, Equipment: ABS, * NET TOP PRICE * Schmitz Rotos axles with disk brakes * Lift axle * SPEED CURTAIN tarpaulin L+R loading and unloading without stanchions/support slats * Pallet stop L+R Hsdpfxjvaq N Re Agkjp * Varios hydraulic lifting roof with pump * Portal doors * Spare wheel holder * Tool box * Lashing eyes * LxWxH: 13.64 x 2.48 x 2.80-3.00 * Unladen weight: 7,295 kg * Tires: 385/55 R22.5 * German vehicle * good condition Subject to errors and prior sale !!! Sale takes place under exclusion of any warranty! - Mi goworim po Russki - We speak english - Mówimy po polsku

Condition: used, maximum load weight: 31,599 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2018, next inspection (TÜV): 10/2024, loading space length: 13,630 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, Year of construction: 2018, Equipment: ABS, * NET TOP PRICE * Schmitz Rotos axles with disk brakes * Lift axle * SPEED CURTAIN tarpaulin L+R loading and unloading without stanchions/support slats * Pallet stop L+R * Varios hydraulic lifting roof with pump * Portal doors * Tool box * Lashing eyes Hodpfxjwwd Hcj Agksp * LxWxH: 13.63 x 2.49 x 2.80-3.00 * Unladen weight: 7,401 kg * Tires: 435/50 R22.5 * German vehicle * Top condition WhatsApp: Errors and prior sale reserved !!! Sale takes place under exclusion of any warranty! - Mi goworim po Russki - We speak english - Mówimy po polsku - Hablamos español

Condition: used, mileage: 615,000 km, power: 427 kW (580.56 HP), first registration: 11/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, loading space length: 6,700 mm, Year of construction: 2017, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Scania R580 6x4 timber vehicle, folding rear crane Palfinger Epsilon 150Z (year of manufacture 2017), Euro 6, automatic transmission, retarder, long-distance cab CR19, leaf-air suspension, timber superstructure with stanchions, trailer coupling, ACC, lane keeping assist, leather seats, automatic climate control, auxiliary heater, TV, beacon lights, air horns, navigation system, fridge compartment, coffee machine, heated seats, electric windows. Hodpfx Asyy Hdcegksp

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Axle lift for 1st and 3rd axle incl. drive-off aid, operation "3x brake activation" ROTOS SCB running gear system (disc brake) Schmitz Cargobull floor fully sealed around the perimeter and between floor joints 2 wheel chocks with holder Front wall anodized, steel corner posts galvanized Rear wall anodized, STEEL corner stanchions galvanized Load securing: body certified according to EN 12642 XL with beverage certificate Main beam height front 125mm, rear 400+28mm, Smart Generation Spare wheel holder, basket design, bolted for 2 spare wheels, behind the unit Continuous lashing points in the outer frame 2 LED reversing lights, separate 2 steel corner supports at the rear for SCHMITZ sliding roof, with integrated curtain tensioner Additional pair of straight plastic mudguards between the axles Row(s) of ALUMINIUM sideboards with V-profile Curtain tension ratchet at the front All-round curtain rope with holder on the front wall (not a customs seal) Tyre brand SCB "SELECTION" Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone Hedpfxox Ayf Nj Agkjp Regional transport tyre tread (M+S) Plastic toolbox with lid holder, shelf, and drawer behind the unit With German registration documents The vehicle complies with EC type approval with Certificate of Conformity (CoC) Rear contour marking all around, color: red Side contour marking on curtain, color: white Wheels & tires: 385/65R22.5 Despite careful inspection, input or data transmission errors cannot be excluded. All information, including equipment, is therefore non-binding and without guarantee. Prior sale, changes, and errors reserved. This advertisement does not constitute a binding offer within the meaning of § 145 BGB, but is for information purposes only. Binding equipment specifications are stated exclusively in the purchase contract.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27, L214 Jib, and Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Dual-axle single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Hedpfx Agex A Npdokjp Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E - Onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front-view mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic light switching between daytime running and dipped beam Automatic headlamp leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED beacon lights (orange), mounted on the front of the cab roof Cab roof pass-throughs, both sides Pre-wiring for roof-mounted headlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and CB radio preparation Roof bar for accessories, front Emblems/type designation factory-mounted Emission type plate (Euro...) L plate (low-noise vehicles -96) Flatbed executed as steel/welded construction, fixed-mounted, low design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Recessed lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible positioning 6 x stake pockets for stanchions (3 per side) Hydraulic extension of the flatbed up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underrun protection, as low as possible, operable via radio remote control Robust front wall made of welded frame with recessed stanchion depot pockets Cladding panels, fenders made of tread plate, sandblasted, powder-coated and painted in vehicle color Toolboxes between rear axles fitted with tread plate 5 pcs. toolboxes, natural finish tread plate, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted, powder-coated and painted in vehicle color. Mounting of rear underrun protection and additional stabilizer, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle lever system with PROLINK (overbending articulation up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on the display Danfoss D850 control block with 4 control valves mounted on the crane column Emergency control for crane operation High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-axle stepped saddle plateau with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross beams made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate with all necessary chassis reinforcements and cross connections Axles 2 BPW axles with a load capacity of 10,000 kg each with 17.5" drum brakes ABS: 1 axle sensing Wheelbase: 1,810 mm Tires 8-wheel type 235/75 R17.5 Rims Aluminum rims, 10-hole, centered, ET= 122 mm Lighting system 24V lighting system in accordance with EU directives 76/756/EEC ff. with: 2x2 three-chamber LED lights 1x reversing light LED 1x LED fog light LED side marker lights Lane departure lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket connected according to EU standard Floor Galvanized grating covering on drop deck Steel tear plate in the axle area Load securing Outer frame with lashing hole profile D030 mm in the slope 2x12 lashing points 8,000 daN in the outer frame 3x combi row of stanchion pockets for 80x80 mm stanchions in the drop deck Accessories 2x wheel chocks with holder Spare wheel holder Winch 2x storage box with drawer (chain storage) Surface protection Steel construction: blasted and primed Coloring Chassis/frame/floor frame: single color in RAL 3020 (traffic red) Axle hubs: single-colored in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminum Durabright Hedpfx Asn Hrtgegkep With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beam 360 ° working range approx. 90 % to the front For further information please do not hesitate to contact us

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,820 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 3,284 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Loading space length: 13,820 mm ? Height: 3,284 mm ? Width: 2,550 mm ? Loading space length (inside): 13,620 mm ? Loading space width (inside): 2,480 mm ? Fifth wheel height: 1,150 mm ? Permissible total weight: 36,000 kg ? Empty weight: 6,530 kg ? Container locks for the following containers: - 1 x 40', 2 x 20' and 1 x 20' in the middle up to 25 ton _____ Axles ? Krone axles with disc brakes ? 1st axle lift axle ? Air suspension ? Wheel chocks ? Axle cap KM counter ? Tire brand: According to manufacturer's choice: 385/65 R22.5 ? KRONE TPMS control unit ? EBS ? Steel rims ? KRONE, air-sprung unit + self-steering axle _____ Structure / attachments ? Mechanical supports ? Steel bulkhead with stable corner stanchions, 2,000 mm high Hedpfx Agjv E Tpdjksp ? Internal bulkhead reinforcement with 9 mm thick ? 2 warning signs ? 2 sets of over-width signs including outline light ? Pallet storage box, closed, for 24 Euro pallets ? Stanchion depot on the left and right sides for 6 insert stanchions ? Forklift bracket ? Folded underrun protection ? KRONE Telematics KSC ProPlus Dry 2 ? Max. 7,000 kg forklift axle load ? 30 mm thick waterproof plate floor _____ Lighting / electrics ? LED side marker lights with direction indicator ? Rotating beacon (orange) including rod holder ? Multifunctional rear lights (full LED), Hella (Gen.2) ? 2x LED license plate lights _____ Paint finish ? Chassis: jet black - RAL 9005 ? Axle hub: jet black - RAL 9005 ? Front wall: light grey - RAL 7035 ? Rims: silver natural

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction Hjdpfx Agsy Ei R Ajkep • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2013, next inspection (TÜV): 12/2023, Krone steel mat trailers with drop sides * Krone axles * Air suspension * Disc brakes * 1st axle liftable * 2 pallet boxes * 1 plastic storage box Hjdpfspr T Tbsx Agkop * Drop sides * Plug-in stanchions * Cable winch * Lashing rings * Spare wheel holder with spare wheel * Lashing rings * Mechanical Jost landing gear * Tires 385/65 R22.5 For further information please do not hesitate to contact us

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2016, total width: 2,550 mm, total height: 3,277 mm, Equipment: ABS, Krone steel mat trailer with side walls * Krone axles * Air suspension * Disc brakes * Liftable 1st axle * 1 pallet box * 1 plastic storage box * Side walls * Plug-in stanchions * Cable winch * Lashing rings * Spare wheel carrier * Lashing rings Hjdpfev Trz Iox Agksp * Mechanical Jost landing gear * Tires 385/65 R22.5 We are happy to provide you with further information.

Condition: new, maximum load weight: 29,575 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 3,289 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Loading space length: 13860 mm ? Width: 2550 mm ? Loading space length (inside): 13620 mm ? Loading space width (inside): 2480 mm ? Wheelbase: 1,310 / 1,310 mm ? Fifth wheel height: 1150 mm ? Permissible total weight: 36,000 kg ? Empty weight: 6425 kg _____ Axles ? KRONE axles with disc brakes ? Tire brand: manufacturer's selection 385/65 R22.5 ? ABS ? Wheel nuts with protective caps Hsdpferbvqgjx Agkop ? 1st axle lift axle ? Mechanical supports ? Air suspension ? Wheel chocks ? Brake system: Knorr _____ Structure / attachments ? 4x side walls per side ? LM side walls 750 mm high, foldable/removable ? 3 pairs of folding stanchions ? Corner stanchions at the rear at side wall height, as plug-in stanchions ? Corner stanchions at the rear attached to the side ? 10 pairs of stanchion pockets 81 x 81 mm in the outer frame ? 10 stanchion pockets 81 x 81 mm in the middle of the floor ? 12 plug-in stanchions, total length approx. 1,950 mm ? 4 pairs of ship fastening straps on the side EN 29367-2 ? 1 tool box _____ Floor / tarpaulin ? 30 mm thick waterproof panel floor ? Pallet box, closed, for 24 Euro pallets ? Premium visual seal ? Floor loads up to max. 7,000 kg forklift axle load _____ Lighting / electrics ? Multifunctional rear lights (full LED), Hella (Gen.2) ? Side marker lights (flashing function) ? 2 outline lights with rubber arm, LED version ? 2 LED license plate lights _____ Paint finish ? Chassis including outer frame RAL 9005 jet black ? Axles including wheel hubs RAL 9005 jet black ? Attachments black OR GALVANIZED ? Rims silver natural ? Underrun protection white POWDER COATED ? Lighting bracket white POWDER COATED ? Support winches RAL 9005 jet black ? Ship fastening straps RAL 1004 GOLD YELLOW ? Front wall RAL 7035 light gray ? Corner stanchions rear RAL 7035 light gray ? Middle stanchions RAL 7035 light gray ? Side walls ANODIZED ? Rear wall ANODIZED ? Pallet box/storage box lid white POWDER COATED

Condition: new, maximum load weight: 37,581 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm Hsdpsmtwypefx Agkjp * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon * Tire well bridge for closing the wheel wells Chassis color RAL 3020 traffic red For further information please do not hesitate to contact us

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-axle stepped saddle plateau with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross beams made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate with all necessary chassis reinforcements and cross connections Axles 2 BPW axles with a load capacity of 10,000 kg each with 17.5" drum brakes ABS: 1 axle sensing Wheelbase: 1,810 mm Tires 8-wheel type 235/75 R17.5 Rims Aluminum rims, 10-hole, centered, ET= 122 mm Hjdet Izpyjpfx Agkop Lighting system 24V lighting system in accordance with EU directives 76/756/EEC ff. with: 2x2 three-chamber LED lights 1x reversing light LED 1x LED fog light LED side marker lights Lane departure lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket connected according to EU standard Floor Galvanized grating covering on drop deck Steel tear plate in the axle area Load securing Outer frame with lashing hole profile D030 mm in the slope 2x12 lashing points 8,000 daN in the outer frame 3x combi row of stanchion pockets for 80x80 mm stanchions in the drop deck Accessories 2x wheel chocks with holder Spare wheel holder Winch 2x storage box with drawer (chain storage) Surface protection Steel construction: blasted and primed Coloring Chassis/frame/floor frame: single color in RAL 3020 (traffic red) Axle hubs: single-colored in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminum Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beam 360 ° working range approx. 90 % to the front For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,937 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck Available immediately! TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity Hedpfx Asw Nlzqsgkop * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-wheel tires 245/70R17.5 * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm height in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified Hsdpfx Agey Ei Rvokop • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, maximum load weight: 34,815 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2026, Equipment: ABS, Cheese drill SPA Mega extendable HD platform trailer Hedpsl N Syvsfx Agksp Immediately available TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4285 mm * Platform length 8,950 mm * Extension 6,900 mm Platform extension * Extension locking positions 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Overall width 2,550 mm * Gross vehicle weight (80 km/h) 45,000 kg * Gross vehicle weight (60 km/h) 46,000 kg * Unladen weight 10,185 kg CHASSIS: BPW axles with air suspension and disc brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * 1st axle liftable * Wabco brake system * Tires 445/45 R19.5 * 1x spare wheel holder CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm hardwood floor * 8x2 side extensions extendable up to 300 mm * Telescopic support winch front 50t capacity * Mechanically folding rear outriggers 45t capacity RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * Container locks suitable for 1x20 ft , 2x20 ft , 1x40 ft , 1x45 ft , * 1,700 mm steel end wall with Code XL certificate ACCESSORIES: 1x stainless steel toolbox * Stanchion box on bulkhead * 2 x 2 extra-wide boards with LED lighting * Rotating beacon Chassis color RAL 3020 traffic red For further information please do not hesitate to contact us