Used Super Cut for sale (20,347)

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. Bsdpjv Iccfefx Agzowg • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: new, Year of construction: 2025, Cutting length 3200 mm Cutting height 1600 mm Motor output 1,3 kW Bwjdowiipmopfx Agzjg Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg

Condition: ready for operation (used), Year of construction: 2003, This DIMTER S50 Opticut was manufactured in 2003. A robust optimizing cross-cut saw, it features a processing length of 5 m and a saw blade diameter of 500 mm. A new Movidrive converter was installed in 2018, enhancing its performance. If you are looking to get high-quality cutting capabilities, consider the DIMTER S50 Opticut machine we have for sale. Contact us for more information about this machine. Application Types Bsdpex D Hxrofx Agzewg Sawing (Wood)

Condition: good (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Bwodskv Untspfx Agzjg Wood height max. 100 mm Saw 7.5 kW Feed 6 kW worked 1995 - 2012 approx. 4 hours/day

Condition: excellent (used), mileage: 133,000 km, power: 294 kW (399.73 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, total length: 11,610 mm, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, - Brake booster - Remote-controlled central locking - Refrigerator - Air suspension - Air horn - Radio/CD player - Reversing camera - Sun visor - Toolbox - Xenon lighting - Central lubrication Manufacturer: WIEDEMANN Model / Sales designation: SUPER 1000 15 Equipment number: D/BAM/1666/T Factory No.: X OW 1000 1494 Year of manufacture: 02.12.2016 Equipment: Suction / pressure tank body ADR Bedjx Nkb Rjpfx Agzjwg Sludge compartment – variable size, rear closure floor and front torispherical head made from stainless steel, material 1.4404, sludge tank in stainless steel, material 1.4404, auxiliary tipping device, sludge tank lid/ADR, sludge tank lid – hydraulically opening, central locking pneumatically operated, level indicator with scale at the tank bottom, lower suction connection with gate valve DN 125 reduced to DN 100, lower suction connection pneumatically actuated, upper suction connection with gate valve DN 125 reduced to DN 100, hydraulic telescopic piston, display of 3 pre-set piston positions, ADR equipment, tank code L4BH (without heat recovery), splash partition in stainless steel 1.4301, vacuum pump type CVS VACUSTAR 1600 – DN 100, overfill protection, vacuum pump cooling, oil separator and silencer, vacuum pump flushing device, vacuum system piping, safety fittings and fittings DN 125, suction hose reel 25 m DN 125, special spiral suction hose 25 m / DN 125, oil-resistant, transport hose reel 40 m DN 80 (side-mounted), suction and high-pressure (HP) boom, retractable suction and HP boom, water compartment – variable, water filling device, hand washing device, warm, level control – Plexiglas sight glass for water compartment, high-pressure pump type URACA P 345-60, HP system protection, high-pressure reel 220 m DN 25 or 180 m DN 32, at the boom, high-pressure hose 180 m DN 25, rubber (GrüloKan 250), large automatic winding device, pressure roller – large HP reel, meter counter, high-pressure reel 80 m DN 13, hydraulic, high-pressure hose 80 m DN 13, rubber (GrüloKan 250), water shortage protection, pneumatic system, three-stage hydraulic system, centralized lubrication system, hydraulic winch, electrical system, reversing camera system with 2nd camera, engine can be started from control panel, PLC/CAN-BUS control, control cabinet with display, radio remote control with display, equipment cabinet with single flap – one side, insert tubes for suction hoses, pump room sound enclosure, full side paneling, toolbox approx. 800x500x500 mm, stainless steel, 3 work lights (LED), 2 revolving warning lights – flashing version, operating hour meter for HP pump; operating hour meter for vacuum pump, compressed air connection, spring cable pull, ladder, ladder holder, shovel, broom, and manhole hook Next inspection dates: General inspection (HU): 01 / 2026 Section 57b test: 05 / 2025 Safety inspection (SP): 07 / 2025 GGVSEB/ADR inspection: 02.01.2026 Tank inspection: 12 / 2027 German registration In very good condition! Immediately operational Transmission Transmission: ZF, 16-speed manual transmission Axle configuration Front axle 1: steered Front axle 2: steered Rear axle 1: steered Weights Unladen weight: 21,952 kg Payload: 10,048 kg Gross vehicle weight: 32,000 kg Functionality Body make: Wiedemann Super 1000...

Condition: excellent (used), C.N.C. WORKING CENTER 4 axes (X-Y-Z-C) Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP / IMATRONIC - BIMA Fast Cut Working table with pods and rails. No. 8 Supports (rails) of length mm 1400 Bsdpfxovxhnue Agzswg Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 4200 x 1600 x 60 Min. workpieces dimensions (X - Y - Z) mm 295 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 4250 x 2200 x 60 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 28 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 14,5 (S6) / Kw 7,5 (S1) N° 3 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) N° 5 Air cushion tables (for the panel parking before being processed) Vacuum system with suction cups (controlled by CN) to lift panel onto outfeed belts Workpieces Outfeed system (from Bima Cut) with system with motorized belts

Condition: used, mileage: 131,289 km, power: 338 kW (459.55 HP), first registration: 04/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,750 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, Scania Approved, color: White, permissible total weight: 18,000 kg, 1st axle: 385/55 R22.5, 2nd axle: 315/70 R22.5, fabric seats, interior color: black, leaf-air suspension, retarder, fifth wheel: JOST JSK37C-W 150, -660 mm, electronic braking system (EBS), electronic stability program (ESP), automatic climate control, park cooling system, adaptive cruise control (ACC), LED headlights, automatic driving lights, headlight leveling, Bluetooth hands-free system, rain sensor, adjustable steering column, roof hatch, roof spoiler, fog lights, electrically adjustable and heated external mirrors, heated kerb mirror, wide-angle mirror, immobilizer, wind deflector, axle load indicator, hill start assist, LED daytime running lights, 1x15-pin socket, coasting function, telematics system, side fairings, upper and lower bed, EGR, SCR, warranty active until: 16.04.2028, ex-rental vehicle, non-binding offer, errors and prior sale excepted. Image may not reflect the actual offer. Bjdjx Ntflepfx Agzowg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 560x500x580 mm Bwsdpfx Agjvz Hf Dozjg Weight 80 kg Total power requirement 0,75 kw

Year of construction: 2008, condition: ready for operation (used), General Data Bwedpfx Asx D E Aijgzsg Machine weight 3000 kg Main Drive Number of axis 3 Workpiece Workpiece X 350 mm Workpiece Y 250 mm Workpiece Z 220 mm This 3-axis AGIE Charmilles CUT 20 wire EDM machine was manufactured in 2008. It features a working area of 350mm (X) x 250mm (Y) with a maximum machining height of 220mm in Z. If you are looking to get high-quality EDM capabilities, consider the AGIE Charmilles CUT 20 machine we have for sale. Contact us for more information. Application Types EDM

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1832.14, feed rate X-axis: 60 m/min, cutting height (max.): 160 mm, cutting width (max.): 360 mm, total length: 1,300 mm, total width: 1,300 mm, TECHNICAL DETAILS Max. cutting height: 160 mm Max. cutting width: 360 mm Max. feed speed: 60 m/min MACHINE DETAILS Machine dimensions (L x W x H): 1,300 x 1,300 x 1,700 mm Infeed table dimensions (L x W x H): 7,600 x 2,000 x 1,100 mm Outfeed table dimensions (L x W x H): 6,300 x 2,100 x 1,050 mm EQUIPMENT Bwsdpox Ahc Asfx Agzog Under-table cross-cut saw Automatic feed

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: XLRTEH4300G267019, mileage: 592,017 km, power: 390 kW (530.25 HP), first registration: 06/2019, fuel type: diesel, empty load weight: 8,535 kg, maximum load weight: 9,465 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,800 mm, next inspection (TÜV): 10/2026, brakes: intarder, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, spoiler, • Daf XF 530 FT SSC • Second owner, accident-free • 12,902 cc, Euro 6C • Automatic transmission, 12+2 gears • Intrader, differential lock • Adaptive cruise control (ACC) • Wheelbase 3,800 mm, fifth wheel height approx. 1.17 m • Permissible gross weight 18,000 kg, technically possible up to 19,500 kg • Unladen weight 8,535 kg • Two bunks, refrigerator • Automatic climate control, parking air conditioning, auxiliary heater • ABS, EBS, ESP • Radio-CD/Aux/Bluetooth/Navigation, toll preparation • Double aluminium biodiesel tanks approx. 600 litres and approx. 340 litres Bjdpfxjx Ng Adj Agzjwg • Front tyres 355/50 R 22.5 approx. 6 mm • Rear tyres 295/60 R 22.5 approx. 8 mm

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP + IMAwinCAD Bjdpfxstixpue Agzswg Working table with pods and rails. No. 6 Supports (rails) of lenght mm 1450 - DYNAPOINT Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 6300 x 1450 x 100 Min. workpieces dimensions (X - Y - Z) mm 320 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 5600 x 2100 x 38 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 34 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 18 (S6) Circular Grooving Saw (90°) diam. (mm) 200 Edge Banding unit (always ready on board) - VT 100 Edge coils supporting unit (No. 2 reels) Combined aggregate (Flush-Trimming/Scraping) Workpieces Infeed system (to the Bima Cut) with Brush Table N° 6 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) Workpieces Outfeed (from Bima Cut) With motorized Rollers + Angular Transfer System

Condition: used, Year of construction: 1999, max 70 mm Bodpfx Agjw Sygaszewg hydraulic ja

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x800x1900 mm Weight 2400 kg Total power requirement 16 kw Bwjdpevz E Nuefx Agzeg

Year of construction: 2024, condition: ready for operation (used), This EXPERT cut Expert ecocam 2 was manufactured in 2024. It features a high positioning speed of 90 m/min and can handle cutting heights up to 100 mm. The machine operates on a PC-based NC software and supports various tool options including electric oscillating knives and driven circular knives. Ideal for cutting leather, textiles, and foams. For more information about this machine, please reach out to us. Bwedpfsx D Nnpsx Agzog Application Types Other Machine Tools

Condition: used, Year of construction: 2007, total height: 1,750 mm, total length: 1,000 mm, total width: 1,810 mm, Weight: 1.240 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 100658 - Main motor power [kW]: 7.5 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Power [kW]: 8.0 - Transport dimensions: 1000mm x 1810mm x 1750mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bodpswniuajfx Agzswg Yorick Diebels

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x930x1080 mm Bodpovz Et Hsfx Agzjwg Weight 390 kg Total power requirement 1,5 kw

Condition: used, Year of construction: 2016, total height: 1,600 mm, total length: 14,100 mm, total width: 1,600 mm, Weight: 2.500 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes Bsdpewnh N Njfx Agzswg - CE certificate present: No - Serial number: 6237 - Voltage [V]: 415 - Current consumption [A]: 20 - Transport dimensions: 14100mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, HM-ZN 8500 undercutting saw Bedpfxewnhz Sj Agzewg Serial number: 277 Connection Voltage: 400V- 6,6KW Weight: 1400 KG Saw blade max: 700mm Saw blade min: 600mm Bore: 30mm Saw blade tiltable Length automatic feed: 9500 mm Length output conveyor: 4300 mm Total dimensions: 15000x1500x1800 mm (LxWxH) - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total height: 1,750 mm, total length: 1,350 mm, total width: 1,350 mm, Price: On request Optimization cross-cut saw Stromab TR 500 Matrix 4 4000 Year of construction 2005 Engine power 10 hp Auto push-up system Inkjet printer - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 250143 Bjdjwq U Dxepfx Agzswg - Main motor power [kW]: 7.5 - Max. saw width [mm]: 375 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 4300 - Output table length [mm]: 2000 - Transport dimensions: 1350mm x 1350mm x 1750mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, total height: 1,700 mm, total length: 1,500 mm, total width: 1,200 mm, - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 263989 - Max. saw width [mm]: 380 - Max. saw blade diameter [mm]: 550 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 14.5 - Power [kW]: 5.7 - Transport dimensions: 1500mm x 1200mm x 1700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bwjdpfjxdl E Rex Agzjg Yorick Diebels

Condition: used, Year of construction: 2002, Dimensions (LxBxH): 160 x 766 x 209 cm Price: On request Four-side moulder Weinig Profimat 26 S, 6head Year of construction 2002 Machine number 95514 min/max Working height 8/120 mm min/max Working width 20/230 mm Working speed 5/24 m/min Spindle speed 6000 rpm Spindle diameter 40mm Engines 1. Spindle - under ..kW 2nd/3rd Spindle - left/right .kW 4. Spindle - above 11kW 5. Spindle - above 11kW 5. Spindle - under ..kW Dimensions 3900 x 1800 x 1900 mm (L x W x H), weight 2500 kg - Year: 2002 - Documentation available: No - CE certificate present: No - Transport dimensions: 1600mm x 7668mm x 2090mm (l x w x h) Bodpfx Agswng I Dszewg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, total height: 1,600 mm, total length: 1,300 mm, total width: 1,350 mm, - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 24.095.2 - Transport dimensions: 1300mm x 1350mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bwedpfx Aswnilrogzeg Yorick Diebels

Condition: used, Year of construction: 2001, Dimensions (LxW): 170 x 544 cm Price: On request - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 92789 - Voltage [V]: 380 - Current consumption [A]: 85 - Fuse [A]: 100 - Power [kW]: 38.0 - Transport packages [pcs.]: 1 Bwedpfx Agjwnizmezjg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, Undercut cross-cut saw HM-D 6500-R Serial number: 319 Connection Voltage: 400V- 11KW Weight: 2450 KG Saw blade max: 550 mm Saw blade min: 500mm Bore: 30mm Length automatic feed: unknown Available from August 2024 Bjdpfjwng Sisx Agzjwg - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 319 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels