Used Sus 80 for sale (17,507)

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/80 Phoenix Clamping force: 80 tons Year of manufacture: 2004 Screw diameter: 40 mm Fodsxq Ti Ropfx Apwjgf

Condition: ready for operation (used), Year of construction: 1986, Engel ES 80/35 ST Closing 35 tons Fgsdpfxjtwmv Se Apwef Year 1986 Scrow 22mm EC 88

Year of construction: 2008, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, positioning table flat short-stroke linear axis for manual adjustment -Type: RK C 80/194 -Travel: 50 mm -Number: 3x linear axis available -Price: per piece -Dimensions: 305/80/H45 mm Fedpfx Apjxln N Iewjgf -Weight: 1.6 kg/piece

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end. Fgsdpezqam Asfx Apwef

Condition: used, Year of construction: 2005, Max. pressing force 80 t Max. length 2500 mm Fgsdpfxjzdf D Uj Apwef Stroke 200 mm Machine weight 5750 kg

Condition: good (used), Press force: 200 tons Table: 1500x1000 mm Motor: 45 kW Weight: 18,000 kg Frame width: 1500 mm Fgjdpfx Aegvz Hxepwof Dimensions: Machine: 5500x2610x2150 mm

Condition: ready for operation (used), Year of construction: 2010, operating hours: 80,000 h, clamping force: 800 kN, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, product length (max.): 4,090 mm, Hydraulic injection moulding machine manufactured in 2010. This Krauss Maffei CX 80-180 features a clamping force of 80 T and a screw diameter of 40 mm. It has a shot volume of 201 cm³ and a shot weight of 183 g. The machine includes a Euromap 67 robot interface and six heating zones. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei CX 80-180 machine we have for sale. Contact us for further details. • Outer length: 670 mm • Outer width: 670 mm • Clamping force: 80.0 T • Screw diameter: 40.0 mm • Tie Bar spacing: 420 x 420 mm • Shot volume: 201.0 cm3 • Shot weight: 183.0 g • 6 heating zones • Hydraulic core Fgedezk Elwjpfx Apwsf • Includes a Sepro sprue picker with the machine

Condition: used, Manufacturer: Mesutronic Fgedpjxcudmofx Apwof Throughput: 350 x 80 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: DEM120281014, overall weight: 80 kg, total length: 1,000 mm, total width: 400 mm, total height: 1,000 mm, power: 1.1 kW (1.50 HP), type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, Schmalz VAGG 40 AC3 80 Vacuum Pump – 80 l tank, mobile, automatic ✅ Mobile on 4 wheels (easy integration) ✅ 80 l vacuum reservoir (stable pressure maintenance) ✅ Automatic control (-0.7 to -0.8 bar) ✅ Warning signal in case of underpressure/power failure ✅ Very good condition, few signs of use Ideal for CNC clamping technology, as well as for clamping and moving panels in carpentry or metal construction. Accessories for panel clamping are also available used upon request. The vacuum pump can be inspected and tested in Leinfelden-Echterdingen. Fjdszqvpyjpfx Apwegf

Condition: used, Year of construction: 1985, Used Machine Fodpfxozk N Dwo Apwsgf Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor at 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits Availability: at short notice Location: DE-63934 Röllbach

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Fgedpfx Apoy Hkd Hjwof Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Fgedpfsziy Dfsx Apwjf Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Year of construction: 2021, functionality: fully functional, Fully automatic sealing packaging line PRATIKA 80-T MPS for sale! Fgjdpfxjyxd Nmo Apwjf The basket sealing packaging line consists of equipment from various manufacturers, integrated into a single technological line that complies with CE safety directives and has been certified accordingly. The basket sealing packaging line consists of: · PRATIKA 80-T MPS, year of manufacture 2021 · 2 pcs. x 1.80 m conveyors with positioning system · 1 pcs. x 2,70 m conveyor · 2 pcs. x 3 m conveyors · 1 pcs. x 3,30 m conveyor (at the control panel) · 1 pcs. x 1,10 m conveyor · 2 pcs. push cylinders · Control Panel with Siemens controller · Electrical cabinet · Security fences Packaging line requires approx. 4 × 11 m of floor space. Layout on request. PRODUCTS SIZES. This line was used to package products with the following dimensions: Kompelement mesh basket size 500x350x160 mm. Productivity in hour 1470 pcs. Kompelement mesh basket size 500x580x160 mm. Productivity in hour 1260 pcs. Kompelement mesh basket size 750x350x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 750x580x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 1000x350x160 mm. Productivity in hour 840 pcs. Kompelement mesh basket size 1000x580x160 mm. Productivity in hour 744 pcs. Jonaxel mesh basket size 459x501x137 mm. Productivity in hour 1260 pcs. TECHNICAL CHARACTERISTICS PLC Programmable Logic Controller Siemens Input/output monitor HMI Siemens Conveyor system speed up to 20 m/min Packing system capacity up to 25 bags per minute with every second bag inserted Maximum packaging film thickness 50 microns Maximum packaging film roll diameter 350 mm Note: Labeling, printer, filter and lasers shown in the photos are not for sale.

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Machine is in good working condition. Fgsdszk U Unjpfx Apwof

Condition: used, Ersatzmesser für Schneidmaschinen - Spare Knife for GuillotinesPolar - Wohlenberg - Perfecta - Schneider Senator 72 - 80 - 92 - 115 - 137 - 155 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Fedpfx Aeh Ax Scspwjgf On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1992, Altarfalztasche MBO T800 - 68 - 80 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Fgjdpfsh Ax Najx Apwef Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 19028, elektrische Pappschere - electric Board Cutter Robust PS 80Serial-No. 19028 Online-Video-Inspection by Skype-Video Fgodpfx Ash Axtdepwef We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Fgodpfxjvkuqms Apwof

Condition: used, machine/vehicle number: 15177, Year of construction: 2018, operating hours: 11,573 h, load capacity: 8,000 kg, lifting height: 3,050 mm, load center: 900 mm, fuel type: diesel, mast type: simplex, construction height: 2,860 mm, fork length: 2,400 mm, Equipment: cabin, 4949984 Fgsdpsw U Hlhofx Apwef Serial Number: 517344J00032

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Fgsdpfx Ajt Hwq Depwjf Please ask for further details.

Condition: excellent (used), Year of construction: 2018, Schuma conveyor belt (80) angled, vertical length 1.00 m, horizontal length 1.05 m, belt width 0.35 m, height 1.00 m (adjustable), crossbar height 2 cm, 2018 Fsdpsw Dqhasfx Apwogf

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Aluminum storage silo with a sturdy base Technical data / Dimensions Available quantity: 1 Volume: approx. 80,000 liters Container type: Silo Condition: used Food grade: yes Design: vertical Internal diameter: approx. 3,500 mm External diameter: approx. 3,550 mm Cylindrical height: approx. 9,830 mm Total height: approx. 14,225 mm Weight: approx. 2,500 kg Specific gravity of the medium: 1 ton/m³ Operating pressure: non-pressurized Material / Construction Material of inner shell: Aluminum Note: Material AlMg3 Equipment Base design: base ring/base frame Quantity: 1 Mounting: fixed Bottom type (top): conical bottom Bottom type (bottom): cone Top: 1 x roof edge railing (height: approx. 1,200 mm) 2 x lifting lugs 1 x ventilation hood Fsdpfx Ajzpzuljpwegf 1 x access to the filter housing The filter housing contains the following connections: 6 x filter openings 1 x connection for silo pilot (level measurement) 1 x connection for level limit signal Shell: 1 x access door (approx. 1,800 x 80 mm) 1 x filling line DN 80, ending in a Storz coupling at the bottom 1 x cable protection pipe DN 50 2 x weld-in adapters for level limit signal Various pipe penetrations in the base frame Various brackets for access ladder Bottom: 1 x manhole DN 400 with cover 1 x discharge chute DN 1500 (Reimelt), ending in a cellular rotary valve at the bottom

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: A10587, functionality: fully functional, pressing force: 80 t, stroke length: 200 mm, throat depth: 250 mm, controller model: Cybelec DNC 30, distance between stands: 2,050 mm, TECHNICAL DETAILS Pressing force: 80 t Bending length: 2,550 mm Frame width: 2,050 mm Table width: 240 mm Maximum stroke: 200 mm Overhang: 250 mm Installation height: 450 mm Stroke speed - downwards, unloaded: 100 mm/s Fodpfxozk E Aco Apwjgf Stroke speed - pressing, loaded: 12 mm/s Stroke speed - upwards, unloaded: 105 mm/s MACHINE DETAILS Control system: Cybelec DNC 30 Oil capacity: 250 l Machine weight, approx.: 8,000 kg

Condition: used, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80°C – 400 V – 5 kW For sale is an industrial drying oven / heat drying cabinet from the manufacturer Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory environments. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel shelves. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Fedpfxezimf Ne Apwegf Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Max. temperature: approx. 80°C Temperature control: digital Safety thermostat included CE marking Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Fgedjzima Hopfx Apwof Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone.