Used Swing Chisel for sale (2,848)

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, number of seats: 23, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily New Vehicle, Stock Vehicle, Immediately Available for Delivery at Special Price / Special Offer - Length: 7618 mm - Width: 2174 mm - Height: 2900 mm - Wheelbase: 4100 mm The base vehicle is extensively equipped, including: - Air suspension - Telma retarder - Additional hot water heater - Automatic air conditioning - 8-speed automatic transmission - GSR systems - Air-cushioned driver's seat with seat heating Interior conversion/modifications as follows: Gujdpfjz Sktvox Aihjh - Thermal and acoustic insulation - Electrically operated external swing door - Webasto RT 145 air conditioning (dual climate control) - Ceiling duct left and right with service sets - Multi-stage night lighting - Half-level podium/no wheel arch in passenger area - Deepened luggage compartment - 22 passenger seats, GRL, adjustable backwards, with magazine net and folding table - Tour guide seat - USB ports in every passenger row - Clock in passenger compartment Net export possible

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 30, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Vehicle in stock. Now with a modified body and 200 mm increased length for more legroom. School bus/transfer bus built on a Sprinter 907 chassis, model 519. A vehicle that may not win any design awards, but is 100% functional. It features a pleasant interior design and optimal use of space. Body made of fiberglass and sheet metal. Frame made of galvanized steel. Permissible total weight up to 6650 kg. Unladen weight 4350 kg Length 7800 mm Width 2280 mm Chassis with the following equipment: - Front air conditioning - Hot water auxiliary heater - Suspension seat with heating - Electric exterior mirrors - Radio with hands-free system - Multifunction steering wheel (adjustable in height and inclination) - Cruise control - Euro 6E engine - Automatic transmission, 519 engine, - MBUX multimedia system, 10 inches - LED and fog lights - Rear and front cameras - Panoramic windows, tinted, single-pane - 2 plus 2 seating arrangement - = 29 seats - + Tour guide seat --> Total seats including driver: 31 - Emergency exit door - Roof hatch/emergency exit hatch - Electric exterior swing door with recessed entrance at the front Gusdpfx Aijz Sktpehjh - Driver's door, original MB - Convector heater in the passenger compartment on the left and right (thermostatically controlled) - Climate control, Webasto - RIGA 12 kW plus front air conditioning MB 7 kW = Dual climate control Rear trunk - Luggage racks on the left and right GSR 3 systems Optional: Price: Chassis 519, 129,990.00 Euro

Condition: new, mileage: 10 km, power: 121 kW (164.51 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,040 mm, loading space height: 98 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), German new vehicle with day registration: * Euro 6E * 6-speed gearbox * 3 seats * 90 L tank * Gross vehicle weight 3,500 kg * ABS + ESP * Driver airbag * Mirrors for body width 2,350 mm * Reinforced rear axle springs * Radio with Bluetooth and steering wheel controls * Central locking with remote control * Electric windows * Electrically adjustable/heated exterior mirrors Three-way tipper: * Subframe: steel, hot-dip galvanized * Operation: electro-hydraulic with remote control Gedoz Sirdjpfx Aihjuh * Floor: galvanized steel plate * Drop sides: foldable aluminum, 40 cm high * Swinging mesh side extension, 58 cm high * Internal dimensions approx. LxWxH 360x204x98 cm * Trailer hitch 3,000 kg * Tool box Load securing equipment also available: * Lashing and tension belts * Cargo bars * Safety vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * etc. Financing and leasing available We manufacture bodies in any size and for any chassis. Tarpaulin, GRP sandwich, aluminum lightweight alloy Visit us at: Bodies – Complete vehicles – Trailers – Consultation – Financing Subject to change and prior sale, no liability for printing or input errors.

Condition: excellent (used), Swing over bed 410 mm Distance between centers 1'000 mm Spindle speeds 4-3'000 rpm Control: WEILER Misc. accessories Gusdpfx Aijk D S Rqjhsh MARCELS MASCHINEN CH

Year of construction: 2003, condition: good (used), Sub-spindle, Y-axis, B-axis SIEMENS 840D Powerline Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Misc. accessories MARCELS MASCHINEN CH Gedpeglf A Hjfx Aiheuh

Condition: good (used), Used Pinacho L1-260 lathe Distance between points: 1625 mm Gsdpfxoudw Iij Aihsuh Max. turning on bed: 520 mm Length of neckline: 350 mm Tilting on longitudinal carriage: 470 mm Turning on the transversal carriage: 320 mm Swing in dive: 770 mm Reed pitch: 68 mm Main engine power: 7.5 hp *It will be delivered with 3-jaw chuck. *Price can be requested with or without CE regulations.

Condition: used, Year of construction: 2015, operating hours: 24,952 h, CMZ TA 20 Y-400 Swing over bed / carriage: 760 / 600 mm Maximum turning diameter: 460 mm Distance spindle – wheelset: 473 mm Travel X / Y / Z / B: 310 / +70 / -50 / 640 / 640 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Main spindle: Maximum speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Bearing outer / inner: 150 / 100 mm Spindle bore: 73 mm Bar capacity: 66 mm Chuck diameter: 210 mm Guedoymc U Aopfx Aihsh Tailstock: Quill stroke: 400 mm Tool turret: 12 stations, all powered Maximum speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm CNC Control: FANUC 32i TB Voltage: 400 V / 50 Hz Connected load: 45 kVA Dimensions (approx. L x W x H): approx. 2.5 x 1.8 x 2.1 m Weight: approx. 6 t Operating hours: approx. 24,952 hours Scope of supply: Bar feeder IEMCA KID 80/16, year 2018 Coolant unit

Condition: excellent (used), Swing over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing over slide 700 mm Spindle bore 128 mm Gusdpfewhkdcox Aihoh Spindle speeds 6.4-1'600 rpm SIEMENS 810 D control Misc. accessories MARCELS MASCHINEN CH

Condition: used, functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 82 mm, turning diameter over bed slide: 870 mm, overall weight: 4,000 kg, spindle mount: MK 5, Conventional Lathe Brand: Geminis Model: GE 870 Power: 12.5Hp Distance between centers: 4,000mm Maximum swing over bed: 870mm Maximum swing in gap: 1,100mm Maximum swing over carriage: 580mm Gap length: 340mm Spindle bore: 82mm Speeds: 18 (16-1250) Carriage width: 620mm Tailstock: Morse taper 5 Includes: - 3-jaw chuck 310mm with internal, external, and soft jaws - Faceplate 700mm - Steady rest (closed type) 360mm - DIN backplate for 330mm chuck - Main faceplate / accessory 500mm - Various gears for different thread types Godpeyc Ryljfx Aihsuh Weight: 4,000kg

Condition: used, mileage: 131,963 km, power: 316 kW (429.64 HP), first registration: 04/2006, fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2026, color: blue, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,800 mm, loading space length: 4,908 mm, loading space width: 2,499 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Cab and Comfort* Cab: High-roof 'LX', 2240 mm wide, 2280 mm long * Driver's comfort seat: Air-suspended, with lumbar support, shoulder adjustment, and heating * Passenger seat: Adjustable in length and backrest angle * 2 sleeping berths with storage space, mattresses on top and bottom, 2 pillows * Seat covers in comfort quality * Cooler box * Air conditioning system AC R134A, CFC-free, with automatic temperature control * Auxiliary air heater EBERSPÄCHER D4S * Trucker package with hot air heating * Electric windows for driver and passenger * Electrically adjustable and heated mirrors (including wide-angle and curb mirrors) * Multifunction steering wheel, adjustable in height and inclination * Central locking * Armrests for driver's seat ----Multimedia* Navigation system BECKER Indianapolis RDS with TMC, CD player, MP3-compatible Gedpfx Aezpdv Ejihouh * D-Phone NOKIA 810 (permanently installed) * Instrument panel km/h 'High-Line' * MAN Tronic (on-board computer) * Batteries: 2 x 12 V, 225 Ah ----Lights and Visibility* Headlight range adjustment * Additional high and low beam headlights * Halogen double headlights H7 * 2 work lights on the cab roof * Entryway lighting * Sun visor ----Safety and Electronics* Electronic braking system MAN BrakeMatic * Anti-lock braking system (ABS) * Electronic speed limiter (85 km/h) * Cruise control * Disc brakes front and rear * Digital axle load indicator (ALM) * Emergency steering pump * Steering wheel lock with immobilizer ----Engine and Drive* Engine: D2066LF01, 430 hp / 316 kW, EURO3, 2100 Nm, Common-Rail * Transmission: ZF 16 S 222 OD with MAN ComfortShift * Differential lock in rear axle * 2nd axle steered ----Exterior and Functionality* Aluminum wheels (ALCOA and MAN) on all axles and as a spare wheel * Trailer coupling ROCKINGER 400G150A * Storage boxes ----Platform Body* Side panels swing open * Wooden floor * Tie-down points embedded in the floor on the sides ----PALFINGER PK 72002 Loading Crane, Year 2006* 4-point outriggers * Continuous slewing range * Knuckle system * Radio control * Crane weights * 2 slewing gears * 400 kg crane base * Max. lifting capacity of 22000 kg * Max. reach 9.4 m & 6900 kg lifting capacity ----* Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 400 liters * Technical total weight: 35000 kg * Tare weight: 21200 kg * Permissible trailer load: 24000 kg * Overall length: 5900 mm * Wheelbase: 17-95 mm * Next inspection due: 10.2026 ----Vehicle number: 12149----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We will be happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an extra charge: ----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM

Condition: good (used), Code: 0417 Brand: PEGIC - ITALY Gjdpfx Ajzfp Avoihjuh Model: DIAMANT 10 - CE Standard Water-cooled sharpening machine and grinder with base for sharpening tools, chisels, drill bits and various tools – CE Standard Technical data: Water-cooled grinding wheel: Wheel diameter 250 mm Hole 25 – Rpm 400 Grinder: Grinding wheel diameter 150 mm Hole 16 – Rpm 2800 Three-phase motor 0,75 Kw Overall dimensions mm 700 x 450 x 1100 h Weight kg 6

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1105, spindle bore: 48 mm, center height: 170 mm, total length: 1,800 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, input voltage: 380 V, input frequency: 50 Hz, WEILER CONDOR B – Guide and Feed Spindle Lathe Guedpfxoztwwkj Aihoh - Connection: 4 kW - Rated current: 9.5 A - Distance between centers: approx. 900 mm - Distance between centers above the bed: approx. 170 mm - Swing over bed: approx. 340 mm - Distance between centers above the carriage: approx. 90 mm - Swing over carriage: approx. 180 mm - Spindle bore: approx. 48 mm The machine is equipped with a tailstock, a Multifix tool holder, and a digital display from the manufacturer ACU-RITE. The machine comes from a training workshop; therefore, the guide and feed spindle are covered. FCA D-73235 Weilheim Teck – loaded onto a truck.

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Guodsy D Nktjpfx Aihjh Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: used, mileage: 34 km, power: 92 kW (125.09 HP), first registration: 10/2026, fuel type: gasoline, overall weight: 2,140 kg, color: black, gearing type: automatic, number of seats: 5, total length: 4,343 mm, total width: 1,813 mm, total height: 1,841 mm, loading space length: 808 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 4134.NW26.TM76050 Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Tow hitch, fixed * Driver Assistance Pack 2: Ford Audio with 8-inch touchscreen and Ford SYNC 4 - Pre-Collision Assist, camera-based - Automatic High Beam - Lane Keeping Assist including Lane Departure Warning - Cruise Control - Intelligent Speed Limiter with Speed Limit Display - Wrong-Way Driving Alert - Traffic Sign Recognition - Front and rear parking sensors - Rear view camera - Electric front windows with quick up/down function for driver and passenger * Halogen headlights with LED daytime running lights, including black headlight surrounds * Wheels: Steel wheels 6 J x 15 with 195/65 R15 all-season tires, suitable for winter conditions * Side windows from the 2nd row of seats and rear window, tinted * Fixed side windows, third row, left and right * Winter Pack 2 (Van): Heated steering wheel - Heated windshield - Automatically dimming interior mirror - Seat Pack 5: - Driver's seat, 6-way adjustable and heated - Passenger's seat, 4-way adjustable and heated - Driver's seat lumbar support - Driver's seat armrest - Removable mesh bulkhead FURTHER EQUIPMENT * 12-volt socket in the passenger compartment * ABS * Airbag, passenger side - with airbag deactivation function - Airbag, driver side - Head/shoulder airbags - right and left - Side airbags, right and left * Exterior mirrors, electrically adjustable and heated, in plastic * On-board computer with fuel consumption and mileage information (e.g., remaining range) as well as outside temperature display * Double-wing tailgate * ESP * Vehicle modem 5G * Remote control for central locking with two keys, folding * Ford Easy Fuel - comfort fuel filler cap and misfuelling protection * FordPass Connect * Glove compartment with lid Guodpfx Aiozp Avwshoh * Rear window, fixed - Heated rear window - Rear window wiper * Rear swing door * Interior lighting with delay function with reading lamps in the front * Air conditioning, manual * Headrests (2) height adjustable * Continuous rear floor mat * Steering wheel: Audio controls on the steering wheel * Center console, large * Fog lights * Emergency brake light - pulsating illumination of the brake lights during hard braking * Emergency Call Assistant * Gasoline particulate filter (OPF) * Upholstery: Fabric City * Tire repair kit * Tire pressure monitoring system * Windshield wiper intermittent function * Sliding door, right and left * Side windows, 2nd row, with hinged window left and right * Power steering * Seat belts - Seat belt tensioners and force limiters in the front - Warning system for unbuckled seat belts for driver and passenger * Seats: Rear seat back foldable, split 40:60 * Sun visors without mirror * Start-Stop system * Daytime running lights * Carpet floor mats, front * Traction control * Bulkhead: Folding mesh bulkhead * Immobilizer * Central locking with remote control ... and more ----First owner. German version. Errors and prior sale excepted. 2 years factory warranty from registration (can be extended on request). We will gladly accept your vehicle as part of the deal. Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you! Since a deviation of the vehicle from the above description cannot be ruled out despite existing checks, we would like to point out that the vehicle description only serves to generally identify the vehicle and does not constitute a guarantee in terms of contract law.

Condition: like new (used), Year of construction: 2023, Maximum turning diameter 220mm, distance between centres 800mm, swing over bed 240mm, Gusdpfx Asz D Eupoihoh spindle speed 4,000rpm, milling speed 12,000rpm, sub-spindle speed 4,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 66mm, 2 X 12 station turrets, spindle power 35Kw, Y axis + /- 45mm, swarf conveyor, coolant., Fanuc 31i.

Condition: new, empty load weight: 3,280 kg, maximum load weight: 8,620 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gedpfxez Nv Huo Aiheuh

Condition: used, mileage: 148,050 km, power: 110 kW (149.56 HP), first registration: 12/2019, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,304 mm, total width: 1,904 mm, total height: 2,477 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 2381X ----Why autonext? Over 400 immediately available passenger cars & commercial vehicles. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options. Entire vehicle range available on autonext? Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Top condition! 1st owner, German vehicle, non-smoking vehicle. Guodpfx Ajxq E H Isihsh Complete service history exclusively at Volkswagen. Next service in 13,600 km. Like-new winter tires on the front. 8 tires, summer tires on steel rims, winter tires on steel rims. Automatic transmission. Adapted for disabled individuals. "AMF Bruns" wheelchair ramp. Wheelchair restraint system. 2x Utila transport chairs. Number of seats: 5. Rail system for seats. Electric step. Air conditioning. Auxiliary heater. Parking assistance. Rear turn signals (roof). ---- Special equipment: * Audio system Composition Audio (radio, SD card interface, MP3 playback function) * Loudspeakers (2) * Electrical package 1 * Exterior mirrors, electrically adjustable and heated. * Power windows * Heated windshield washer nozzles and indicator for washer fluid level * Heated windshield washer nozzles * Indicator for washer fluid level * Auxiliary heater with timer and auxiliary heater * 2nd battery * Permissible total weight 3.20 t * Alloy wheels * Rear turn signals (roof) * Driver assistance system: front and rear parking assistance * Folding remote key (4) * Rear swing doors (opening angle 250 degrees) * Heated rear window with windshield wiper * Climatic air conditioning (driver's cab) 2nd evaporator + auxiliary heating (cargo/passenger compartment) * Half-height cargo compartment bulkhead with padding strip * Mobile phone interface Bluetooth * Front and rear mud flaps * Seat cover / upholstery: Simora fabric * Seats in the driver's cab: armrests, driver's seat * Seats in the driver's cab: front passenger double seat * Seats in the driver's cab: driver's seat, height adjustable * Seats in the driver's cab: lumbar support, driver's seat * Tinted film for passenger compartment windows * Central locking with remote control and interior operation * Sliding door assist on the right Standard equipment: Electronic stability program (ESP) with brake assistant, ASR/ABS, EDS, and hill-start assist, Driver assistance system: hill-start assist, Sliding door strip cover, Passenger airbag can be deactivated, Airbag driver/passenger side, Anti-lock braking system (ABS), Drive type: front-wheel drive, Exterior mirror, convex, left, Exterior mirror, convex, right, Floor covering in the driver's cab: rubber, Roof lining Comfort in the driver's cab, Driver assistance system: brake assistant (HBA), Driver assistance system: multi-collision brake, Window in cargo/passenger compartment: - fixed, front and rear left, Window in cargo/passenger compartment: - fixed, front and rear right, Windshield laminated glass tinted, Transmission 7-speed - dual-clutch transmission DSG, Glove compartment lockable, Rear swing doors with glazing (extended version), Interior release of tailgate / rear swing doors, Interior filter: pollen filter, Interior mirror dimmable, Body/structure: station wagon large-volume standard, Body variant: high roof, Child safety lock on the sliding doors, Fuel tank: 70 liters, Steering column (steering wheel) adjustable, Engine 2.0 liter - 110 kW TDI, Non-smoker package, Wheelbase 3400 mm, Tire repair kit, Tir

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,245 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, total height: 2,060 mm, total width: 1,780 mm, overall weight: 3,600 kg, controller manufacturer: HAAS, controller model: NGC, product length (max.): 3,200 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2019. This HAAS ST-10 features a maximum turning diameter of 229 mm and a maximum turning length of 355 mm. It includes a spindle power of 11.2 kW and a maximum spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10 machine we have for sale. Contact us for further details. Main spindle • Spindle nose: A2-5 • Max bar capacity: 44 mm • Max turning diameter: 229 mm • Max turning length: 355 mm • Max swing over bed: 413 mmTurret and axis travels • Number of tool positions: 12Tailstock • Type: Manual • Quill taper: MT3 • Tailstock travel: 508 mm • Quill travel: 95 mmElectrical supply • Voltage: 440 V (per machine nameplate) • Phases: 3Options included: • Measuring probe • 175 mm three-jaw chuck • Hainbuch SK52 collet chuck Technical Specification Counter Spindle No Guedpfez Izyijx Aihsh Driven Tools No Taper Size VDI 40

Condition: like new (used), Year of construction: 2021, operating hours: 1,400 h, CNC turning machine MT RENT T25FSY Year of manufacture: 2021 Control: SIEMENS 828 D Operating hours: 1400 h Technical data: * Year of manufacture: 2021 * Control: Siemens Sinumerik 828D * Operating hours: approx. 1,400 h * Max. swing diameter over bed: 600 mm * Max. turning diameter: 460 mm * Max. turning length: 558 mm * X-axis travel: 310 mm * Z-axis travel: 620 mm * Y-axis travel: 110 mm / ±55 mm * B-axis travel / counter spindle: 650 mm * Spindle bore: 77 mm * Max. bar diameter: 65 mm * Main spindle speed: max. 4,500 rpm * Counter spindle speed: max. 4,500 rpm * Main spindle motor: 23 kW Gjdpfsz I R Sbox Aihouh * 12-station BMT-60 tool turret * 12 driven tool stations * Tool shank: 25 × 25 mm * Max. drilling bar diameter: 40 mm * Hydraulic working pressure: 40 bar Equipment: * Y-axis * C-axis * Counter spindle * Driven tools * BMT-60 turret * WTO / QuickFlex tool holder * Bar loader * Chip conveyor * Hydraulic 3-jaw chuck * Coolant system * Workpiece/part catcher * Foot pedals * Flat guides

Condition: used, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: diesel, overall weight: 18,600 kg, Year of construction: 2020, operating hours: 2,450 h, drive type: dieselhydraulisch, transport length: 10,680 mm, transport width: 2,550 mm, transport height: 3,000 mm, machine/vehicle number: R 128, Throughput capacity: up to 300 t/h, feed size: max. 500 mm, feed hopper capacity: 7 m³, Screening unit: 4,200 x 1,300 mm, screen type: free-swinging, 2-point bearing, screens: upper and lower decks new, Motor: Deutz / 55 kW. Guodpfoz Hbpusx Aihoh

Condition: ready for operation (used), turning diameter over cross slide: 530 mm, turning diameter: 800 mm, overall weight: 10,000 kg, Poreba Heavy Duty Gap Bed Lathe Model: TPK 80 Distance Between Centres: 5000mm Swing Over Bed: 800mm Swing Over Topslide: 530mm Swing In Gap: 1080 x 200mm Spindle Speeds: 8-1500 RPM Spindle Bore: 95mm Motor: 23 KW Gujdpoz Dh U Ssfx Aiheh Machine With: 800mm 4 Jaw Chuck 400mm Roller Steady 300mm Pad Steady

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2000. This Gildemeister CTX 500 S2 features a maximum turning diameter of 455 mm and a turning length of 1097 mm. It includes a robust tool system with a disc turret and a maximum chuck diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 500 S2 machine we have for sale. Contact us for further details. Gsdsz Iqnpopfx Aihouh - Max. Swing Over Bed / Slide: 680 mm / 670 mm- Max. Turning Diameter over Face Slide: 455 mm- Max. Turning Length: 1097 mm / 2097 mm- Spindle Head Flange: 220 mm (Size 220h5)- Spindle Bore: 107 mm- Spindle Bearing Front Diameter: 140 mm- Max. Chuck Diameter: 315 mm / 400 mm- Tailstock Quill Taper: MK 5 / MK 6- Tailstock Quill Diameter: 120 mm- Tailstock Quill Stroke: 120 mm- Tool System: Disc Turret- Number of Slide Carriage Sets: 1- Number of Face Slides: 1- Longitudinal Stroke: 1097 mm / 2097 mm- Face Stroke: 320 mm- Max. Torque: 650 Nm / 2000 Nm- Feed Force (Longitudinal / Plan): 1 N / 8000 N- Rapid Feed (Longitudinal / Plan): 30 m/min / 24 m/min- Feed Speed Range: mm/min- Main Drive Motor Type: B3- Feed Drive X-Plan Motor: Siemens 1FK6063-6AF71-1AH0 (1.9 kW, 3000 rpm, IP64)- Feed Drive Z-Longitudinal Motor: Siemens 1FK6101-8AF71-1AG0 (4.9 kW, 3000 rpm, IP64)- Lubrication Motor: Vögele 113.50.000701C (0.13 kW, 2200 rpm, IP44)- Hydraulic Motor: 2.2 kW, 1450 rpm, IP54- Connected Load / Power Requirement: 58 kVA- Voltage: 400 V- Frequency: 50 Hz- Current: 85 A- Fuse Rating: 100 A- Control Voltage: 230 V AC / 24 V DC- Floor Space Required: 8.41 m x 4.3 m x 2.41 m (5607/6657 x 3285 x 2405 mm)- Machine Weight: 8700 kg / 10000 kg- Additional Equipment: Chip conveyor with chip container, coolant system, exhaust filter unit (IFM) Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 24” 3 Jaw manual Chuck, Godpfxez D Axfs Aiheuh Tailstock, Swarf Conveyor, Coolant,

Condition: ready for operation (used), Year of construction: 2023, operating hours: 7,032 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 271 mm, travel distance Z-axis: 830 mm, spindle motor power: 25,500 W, overall weight: 5,900 kg, controller manufacturer: SIEMENS, controller model: 840D SLIMline Multi-Touch, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 450 V3 was manufactured in 2023. It features a maximum turning diameter of 400 mm and a turning length of 800 mm, with an X-axis travel of 271 mm and Z-axis travel of 830 mm. The machine includes a 12-position VDI 40 turret and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V3 horizontal turning machine we have for sale. Contact us for further details. • Number of controlled axes: 3 (X, Z, C) • Spindle operating hours: approx. 7,032 hWorking capacity • Max turning diameter: 400 mm • Max turning length: 800 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mmAxes • Rapid traverse X/Z: 30 m/min • Main spindle C-axis • No Y-axis, no counter spindleMain spindle • Spindle nose: A2-8 • Bar capacity: 80 mm • Spindle power: 25.5 kW (40% duty) / 17 kW (continuous) • Spindle torque: 426 Nm (40% duty) / 283 Nm (continuous)Tool turret and driven tools • Turret: 12-position VDI 40 with 6 additional BT stations • Driven tools: max 4,000 rpm, 5.44 kW (40% duty), 20 Nm (40% duty)Tailstock • Tailstock travel: 800 mm • Centre taper: MT5 • Max thrust: 8 kNConstruction • 45° inclined cast-iron bed • Linear guideways Technical Specification Gjdpfxjz Inc Do Aihjuh Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2012, functionality: fully functional, Manufacturer: MORI SEIKI CO., LTD. (Japan) Machine model: NLX2500SY Year / Month of manufacture: August 2012 (08 / 2012) Machine weight: 6,360 kg Electrical connection: 3 phases / 50 Hz / 200 V AC Full load current: 144 A Spindle motor current: 177 A Connected power: 50 kVA Gujdpfx Aisz Hwknohjh Main technical specifications Working area & travels: Max. turning diameter: approx. 366 mm Max. turning length: approx. 705 mm Swinging diameter over bed: 920 mm X-axis travel: 260 mm Y-axis travel: ±50 mm (100 mm) Z-axis travel: 795 mm Max. bar diameter: 80 mm Main spindle: Speed range: max. 4,000 rpm Drive power: 18.5 / 15 kW Spindle nose: JIS A2-8 Chuck size: 10 inches Counter spindle: Speed range: max. 6,000 rpm Drive power: 11 / 7.5 kW Chuck size: 6 inches Tool turret: Number of tool stations: 12 stations (powered) Speed of powered tools: max. 10,000 rpm Power of powered tools: 5.5 / 4.2 kW