Center lathe

Harrison M 300

Condition: excellent (used), turning length: 635 mm, turning diameter: 330 mm, spindle bore: 38 mm, spindle speed (max.): 2,400 rpm, spindle speed (min.): 40 rpm, turning diameter over bed slide: 210 mm, Model: M300 Swing Over Bed: 330mm Swing Over Top Slide: 210mm Swing In Gap: 480mm Distance Between Centres: 635mm Spindle Speeds: 40-2400 RPM Spindle Bore: 38mm Motor: 2.2 KW Machine with: 3 Jaw Chuck Gkedpfxjy N Unns Abhed 4 Jaw Chuck 2 Axis Digital Readout Coolant Light Chuck Guard Quick Change Toolpost with Holders Dimensions: 1700 x 900 x 1470mm High Weight: 600 KGS

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Gksdpfxozb U Eps Abhod Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: reconditioned (used), BSTA 110H, with BBV 202 /120 feeder Mechanically overhauled. Gedpfx Aboizi Hmehekd CE-conversion possible. Contact us for details!

Condition: like new (used), Year of construction: 2023, operating hours: 140 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 14,000 rpm, operating hours of spindle: 45 h, spindle nose: BT40, number of slots in tool magazine: 60, Equipment: chip conveyor, CNC- milling center universal Universal CNC Machining Center Manufacturer: DMG MORI Model: DMU 50 2nd Complete Year of Manufacture: 2023 Control System: Celos with Siemens 840D sl Operate Technical Specifications: Travel Ranges: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm Main Spindle: Speed range – main spindle: 20 – 14,000 rpm Drive power – main spindle (100/40%): 20.3 / 14.5 kW Tool Changer: Tool holder: BT40 Number of tool positions: 60 pos. Feed rates: Rapid traverse (x/y/z): 30 m/min Operating hours: approx. 140 h Spindle hours: approx. 45 h Technical Features & Accessories: - Rotary table, capable of simultaneous operations - Direct position measurement system in x, y, z, b, c - Internal coolant supply, 40 bar, consisting of: - Paper belt filter - 600-liter tank - Spindle rotary joint - Enclosure roof - Rotating viewing window - Rotary joint - Chip conveyor - Flushing gun for chip flushing - Coolant/blow-off air switch - Preparation for 3D quickSET - Infrared probe, Renishaw PP40 (if available) Gkodpfx Abo Ain A Ishod - Tool probe, Renishaw TS27R (if available) - Electronic handwheel (if available) Accessories, tools shown in the illustration, and clamping devices are included in the scope of delivery only if noted in the additional information.

Condition: used, Centerless grinding machine ESTARTA 310 Gjdpeq Ehqfjfx Abhokd

Condition: excellent (used), Year of construction: 2010, Palmary GU20x40NC universal grinding mahcine Year: 2010 SPECIFICATIONS: Capacity Swivel over table Ø210 mm Distance between centers 400 mm Max. external grinding diameter Ø200 mm Max. load of centers 60 kgs Grinding wheel O.D. x width x I.D. Ø355 x 38 x Ø127 mm Linear velocity 33 M/s Grinding wheel - X axis Manual distance 135 mm Godpfsytftbsx Abhokd Auto. rapid advance 25 m/min Max. stroke 185 mm Min. setting unit 0.001 mm One turn of handwheel (graduation) 2 (0.005) mm Table - Z axis Traverse speed 1.5 m/min Max. stroke 480 mm Auto. reciprocate min. stroke 8 mm Feed of one turn of handwheel (2-step) 20 mm (2 mm) Swivel angle -3° , +12° Work spindle head Swivel angle -30° ~ +90° Center taper M.T. No. 3 Spindle speed (variable) 10~300 r.p.m. Max. load of spindle (tool holder included) 15 kgs (max. length: 100 mm) Tailstock Center taper M.T. No. 3 Stroke 20 mm Fine adjustment range ±0.03 mm Motor Wheel spindle 2.2 kW (4HP) Power Total voltage 7 KVA Tank Wheel spindle lubricant tank 7 L Hydraulic tank 46 L Coolant tank 110 L Machine weight 2000 kgs Accessories/options: - grinding wheels - flanges - internal grinding spindle - Marposs activ measuring system - DRO system for 2-axis, SINO - hand tools - documentations Under power in our warehouse.

Condition: excellent (used), Brand: ESTARTA Model: 312 Type: Centerless grinding machine Grinding Wheel dimensions: 508 x304,8 x 160 mm Ø min/max to grinding: 1,5 / 75 mm Regulating wheel width: 160 mm Regulating wheel dimensions : 304,8 x 190,5 x 160 mm Maximum length to rectify in plunge : 160 mm Maximum length to rectify in plunge : 160 mm Gkodpjx Iu E Dsfx Abhod Grinding wheel head motor power : 11 kw Machine size : 2015 x 1280 x 1440 mm Weight : 3500 kgs

Condition: used, Year of construction: 1997, Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Gsdpfxouqd Tmo Abhokd Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton Standard configuration The press was converted to CE standard in press was 2021 converted to a SIEMENS S7 control conveyor system still has a SIEMENS S5 control system. Extended machine accessories Die lifters in the table Automation Feeding unit KEMMERICH consisting ofDecoiler levelling machine roll feeder Coil loading car

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: HEIDENHAIN, controller model: TNC-620, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,600 mm, overall weight: 9,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 775 mm, spindle nose: ISO 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Used 3-axis vertical machining center with Heidenhain TNC-620 CNC Gsdps Afpq Rofx Abhjkd

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm Gedopgmpdepfx Abhskd cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm weight: 2500 kg