Used Swu 250 for sale (9,752)

Condition: used, The press is extremely stable thanks to its heavy steel construction, which is fully welded. The working surface of the press can be easily raised and lowered to any position by means of a hydraulic actuator. Additional tools are available and your own tools can be adapted. Specification: Tonnage: 250 T Ksdpfx Ajugtv Isb Towu Year: 1991 If you have any further questions, we will be happy to answer them.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: ready for operation (used), Technical characteristics Power and Motors Power: 1.5 Kw Overall dimensions Lenght: 560 mm Width: 730 mm Kwsdpfotv Tkysx Ab Teu Height: 410 mm

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and finished welded elements as well as for dismantling mining and other machine assemblies. It is used in mechanical, production, repair plants, etc. Manufacturer: PATENTUS S.A. Kwodpfxjhktq As Ab Tou Type: PAT 300-2/250-2 Year of production: 2017 Technical parameters: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of the cylinders of the gate 1: 2 x 300 mm Diameter of the cylinders of the gate 2: 2 x 250 mm Pressure of the cylinders of the gate 1: 2 x 1768 kN Pressure of the cylinders of the gate 2: 2 x 1228 kN Clearance max. 1240 mm Working cylinder stroke: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - working cylinders x 4 - gate travel cylinder - working cylinder travel cylinder - power unit with pump T-100/30 (2006 with renovation in 2011) Technical condition: used, for inspection

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, number of shelf rows: 10, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) Ksdpfsv Uqwdsx Ab Tjwu - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 9550006, bending force (max.): 254 t, stroke length: 265 mm, overall weight: 18,900 kg, working length: 4,100 mm, TECHNICAL DETAILS Working length: 4,100 mm Pressing force: 2,500 kN Max. stroke: 265 mm Kwodpfxjylv T Ne Ab Tju Rapid traverse speed: 190 mm/s Working speed: 10 mm/s Return speed: 150 mm/s MACHINE DETAILS Electrical data Main motor power: 22 kW Total connected load: 26 kW Line voltage: 3 PH 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Rated current: 63 A Weight: 18,900 kg EQUIPMENT Bending aid

Condition: as good as new (ex-display), power: 129 kW (175.39 HP), fuel type: diesel, color: red, Year of construction: 2023, operating hours: 18 h, Equipment: air conditioning, General information Field of application: Construction Applicable material: Waste Serial number: 252M301318 Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: Cummins Weights Empty weight: 26.400 kg Functional CE mark: yes Ksdpfx Absx I U Tbe Towu Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Tyre size: 10.00-20/7.50 Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 5,025x2,5x3,11 Production country: DE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, diameter 250 mm bore 65 mm Machine dealer with own stock of 1600 m². Kwedpfx Abeyl Nn Hs Tju

Year of construction: 1999, condition: reconditioned (used), Table dimensions: 1200 x 550 mm Kwodpfx Asfci Dgeb Tju Stroke X: 1020 mm Stroke Y: 510 mm Stroke Z: 460 mm Spindle speed: 35-25000 rpm Number of tools: 30 Spindle cone: HSK 63 Spindle center coolant Measuring tool Chip conveyor

Condition: used, operating hours: 18,001 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, nominal power (apparent): 82 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece length (max.): 900 mm, workpiece width (max.): 900 mm, total height: 3,267 mm, total length: 4,523 mm, total width: 8,436 mm, rotational speed (min.): 12,000 rpm, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 80, Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Kjdpfjylw D Ajx Ab Towu Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26000

Condition: good (used), Year of construction: 1981, Centre height 130 mm Swing diameter over bed 260 mm Swing diameter over cross slide 140 mm Distance between centres 600 mm Spindle bore 30 mm Bed width 255 mm Spindle mount DIN 55027 size 5 Speed range 35.5 - 3150 rpm Longitudinal feed range 0.04 – 0.4 mm/rev Cross feed range 0.02 – 0.2 mm/rev Metric threads 0.2 – 18 mm Imperial threads 2 – 76 tpi Module threads 0.4 – 13.5 module Diametral pitch threads 2.6 - 36 DP Tailstock quill taper MK 4 Drive power 3 kW Dimensions L x W x H 2140 x 850 x 1400 mm Weight 1,100 kg Accessories / Special Features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Rapid tool change system “Multifix” size B • Coolant system with chip backsplash • Chuck guard • Hardened bedways • Machine lighting • Bed stop Kwedpfxjxz Rfko Ab Tsu • Emergency stop switch New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearings in 2026, cost €3,950.00 net. Option: New 3-axis digital readout K+C, fully installed €1,995.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, AL-KO POWER UNIT 250 P - Exhibition unit - Integrated pre-separator, integrated automatic extinguishing system ----- Technical Data ----- Extraction nozzle Ø: 250 mm, nominal airflow: 3,534 m³/h, max. airflow: 4,900 m³/h, max. negative pressure: 3,184 Pa, filter area: 22.4 m², chip collection volume: 2 x 250 liters, number of bags: 2 pieces, motor 400 V: 7.5 kW, dimensions (LxWxH): 2,351 x 1,058 x 2,361 mm, sound pressure level: 71 dB(A), weight: 758 kg, according to: GS - HO - new exhibition machine - Ksdpowu Hatsfx Ab Towu

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Feldpausch, conveyor belt, transport belt, belt conveyor, height-adjustable -Speed: 15 m/min -Belt width: 250 mm -Conveyor length: 2060 mm -Height: max. 920 mm -Drive: Engel 0.06 kW, see photo of nameplate -Transport dimensions: 2060/530/H810 mm -Weight: 70 kg Kodpfxoyk T Dce Ab Tjwu

Condition: used, Year of construction: 2015, Technical details: weight of the machine ca.: 4 t Ksdpfx Abol Ha Ube Tjwu

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Brush diameter 250 mm Kodjpu R Ngopfx Ab Tjwu Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Mains connection 380 Volt, 50 Hz - Material support - New deburring brush - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Kwsdpfx Aswypqrob Tju Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless Kwedpfjd N E Rvjx Ab Tju - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Condition: new, plate thickness 2.5 mm Kedpfx Absxaaw He Tjwu throat 260 mm distance between roll centers 92.0 mm weight 295 kg range L-W-H 1200 x 700 x 1200 mm Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox Kodeumvtqjpfx Ab Tswu - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

Condition: used, Year of construction: 2005, power: 5.5 kW (7.48 HP), volume flow: 4,400 m³/h, intake manifold diameter: 250 mm, total height: 2,600 mm, total length: 3,500 mm, total width: 1,600 mm, overall weight: 800 kg, Equipment: CE marking, No. 04523 Mobile extraction unit / mobile dust extractor Schuko Vacomat 250 Used, year of construction 2005 Nominal volume flow 4400 m3/h Minimum volume flow 3533 m3/h Negative pressure 2850 Pa Suction nozzle diameter 250 mm Motor power 5.5 kW Nominal speed 2880 rpm Automatic or manual operation Approved for installation in workrooms Residual dust content level H3, 0.1 mg/m3 Kwjdpfoyl Nc Dox Ab Tsu Type B1, Suitable for extracting combustible dusts in zone 22 Filter bags made of antistatic polyester needle felt Pneumatic filter regeneration, automatic or manual Automatic extinguishing device with powder extinguisher GS-tested CE-compliant Including electrical connection cable with 32 A plug Transport dimensions approx. 3500 x 1600 x 2600 mm LWH Weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1971, Pressure 063 t Kodpfx Aoylzxdsb Tewu throat 250 mm stroke 16 - 90 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 350 mm table surface area 730 x 500 mm hole in the table 180 x 180 mm table height over floor 710 mm ram surface 350 x 220 mm ram adjustment 50 mm dimensions (WxDxH) 1,3 x 2,2 x 2,4 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) Kodpfx Aovuuaisb Tjwu with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m Ksdevuuknopfx Ab Tjwu weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, weight max. 250 kg stroke / mm Ksdpoykvbqjfx Ab Tjwu Load: 250 kg Chain length: 2.5 m Weight: approx. 30 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Pressure 250 t Bending length 3100 mm Kodpfjylwm Rsx Ab Tswu Frame gap 2600 mm Control Cybelec VisiTouch 24 Stroke 300 mm Throat depth 500 mm Installation height 500 mm Rapid approach (down) 175 mm/s Bending speed 0-12 mm/s Total power requirement 22 kW Machine weight approx. 13,000 kg Dimensions 3900 x 2150 x 3360 mm Standard equipment: Basic features: - CNC control Cybelec Visitouch 24 - 6+1 axes: Y1-Y2-X-R-Z1-Z2 +V - Automated dynamic hydraulic crowning system: G-CS - Frame deflection compensation system – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display on the ram for visualizing the backgauge positioning - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliance - Upper and lower tool clamping with PROMECAM mechanical system