Used T-Nut for sale (71,830)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Dedjfdkb Uopfx Anwjut The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Djdpfxeguk A Ho Anweut Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) Dedpfxjmidyfs Anwout - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Djdpfx Anofdkbhjwjut Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Dusdpfx Aeguk Dksnwet 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth Duedpfx Anomhhf Sjwet 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Dujdomhhl Hopfx Anwst Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Dusdpfx Aemhh Dtenwot Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Dujdpfsqt Dmyox Anwjt Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Dujdjguk Dvspfx Anwst Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 280,000 km, power: 94 kW (127.80 HP), first registration: 07/2014, fuel type: diesel, overall weight: 2,950 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 2,320 mm, loading space width: 1,790 mm, loading space height: 1,590 mm, Equipment: ABS, central locking, had accident, soot filter, !!!!! ENGINE CLACKLES !!!!! 3-seater, power steering, 6-speed manual transmission, electric windows, radio-CD, 3-pin power connection, Euro 5, Relec Froid TR22 cooling unit, single rear door, etc. Unladen weight: approx. 1,900 kg, payload: 1,050 kg. Subject to errors, prior sale, and typos. Sale to businesses and export only. Fg-6167 Dusdpfx Anjwik A Uowot Key No. 34 !!!!!

Condition: used, mileage: 125,689 km, power: 94 kW (127.80 HP), first registration: 04/2016, fuel type: diesel, overall weight: 2,950 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 2,300 mm, loading space width: 1,790 mm, loading space height: 1,590 mm, Equipment: ABS, central locking, had accident, soot filter, !!!!! ENGINE NOISE !!!!! Dedpfx Asv Hvkgonwjut 3-seater, power steering, 6-speed manual transmission, electric windows, radio-CD, 3-pin power connection, Euro 5, Carrier Xarios 200 cooling unit, single rear door, etc. Empty weight: approx. 1900 kg, payload: 1050 kg, errors + prior sale + typos reserved. For sale to businesses and export only. !!!! Fg-80247!!!! Key no. 115!!!!! Test drive to Tüv Dekra or Fiat possible!!!!!

Year of construction: 2010, condition: excellent (used), Complete euroblock cheese production line designed for efficient processing of milk into Euroblock cheeses. The system can be easily expanded to produce various sizes of round cheeses with a weight of approximately 4–5 kg. It can process 6.000 liters of milk per batch, up to 4 batches a day. The line exists out of: Milk reception (by a mobile centrifugal pump) Milk receiving pump from the truck or truck with pump unloaded itself. 1. 2 pieces raw milk storage tanks (refrigerated), 6.000 liter per tank. • Manufacturer: Mueller • Year of make: 2012 • Horizontal, insulated and cooled milk storage tank, cip cleanable. • Cooling compressor Freon 2. Milk reception valves • Valve manifold to automatically send the milk to the selected tank, to pump the milk from the tank into the pasteurizer and to CIP (cleanable). • Set of 4-way butterfly valves with controls. • Manufacturer: GEA – Tuchenhagen 3. Complete pasteurize installation • Manufacturer: C van ’t Riet • Year of make: 1996 • Capacity: 6.000 liter • Complete on a skid. • With Balance tank, pumps, heat exchanger, holding tube, hot water control, valve interconnecting piping. Control system with temperature recorder. • In 4-65/75°C Holding tube -> 25/35°C cheese-making temperature. 4. Buffer tank for pasteurized milk 6.500 liter. • Manufacturer: Zero • Top insulated • Function: To store/ buffer warm milk so that the pasteurizer can continue running and two batches can be processed more quickly directly after each other. 5. Cheese vat • Manufacturer: Damrow (Gea) Double 'O' • Volume: 6.000 liter per batch • Closed cheesevat with whey extraction sieve from above. • Self-priming pump for cip and whey. • Placed on a stainless-steel frame for a free fall to the drainage tank. • Separate control system. • Valve manifold (Tuchenhagen) for importing milk from a pasteurizer or buffer tank, valved design so buffertank can independently be cleanded. Dsdjyzxdkopfx Anwout 6. Automatic prepressing and cutting vat • Manufacturer: C van ’t Riet • Year of make: 2010 • Including CIP-pump • Capacity of the curd mixture 6.000-liter vat (for curd processing) • Transfer from curd vat: by gravity • Number of cheeses from 6000 liter: 42 cheeses of 15 kg (approximately) 7. Pressing system • Tunnel press, 42 positions for euroblock. • Pall lane system by pneumatic cylinders to convey the moulds automatic in and out of the press. With controls and press program. 8. Moulds • Micro-perforated LAUDE moulds, 15 kg euroblock. • Molds have been partially replaced and are only a few years old. 9. Mould washing • 2 pieces of mould washing bassins 10. Brine • 8 pieces brine cages/racks (without brine boxes, those are cast in concrete) • 2 pieces brine cooling compressor and tanks (on top) 11. Whey tank • Horizontal whey tank (+/- 7.000-liter capacity) 12. CIP-system (fully automatic Siemens S7) • Consisting one tank with three compartments • Heat exchanger • Automatic valves • CIP pressure pump • The entire pre-factory has a fully automatic CIP and automatic control CPU Siemens S7 (support from the original supplier is possible/delivered by Gea)

Condition: used, mileage: 35 km, power: 110 kW (149.56 HP), first registration: 06/2024, fuel type: electric, overall weight: 7,490 kg, next inspection (TÜV): 05/2028, gearing type: automatic, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,150 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 1530 Location: OsnaTruck Commercial Vehicle Service GmbH in Osnabrück (postal code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Heated exterior mirrors Duedpfx Aoy Acv Tenwjt * Rear traction tires Interior * Driver comfort suspension seat, sprung and heated * Automatic climate control Safety * Driver airbag Comfort and Environment * Reverse warning system Miscellaneous * 2 DIN 7" touchscreen radio, including Apple CarPlay and Android CarPlay, hands-free system * Reinforced vehicle battery, 2x80Ah (2 batteries) * Manual engine speed control * Rear underrun protection * Incl. roll-off container 4000 x 2150 x 500 mm * Heated leather steering wheel * Metallic paint * Lease-purchase/financing or leasing possible via Daimler Truck Financial Service Deutschland (DTFSD). We are happy to provide you with a quote. * Engine version B "zero emission", eCanter * Mechanical power take-off (mPTO) * Payload 3,195 KG * Palfinger telescopic roll-off tipper * Interface, fleet management system (FMS) * Fuso safety package including floor mats * Medium-length mirror brackets * Day registration to Daimler Truck AG * Heated laminated green windscreen * Rear axle stabilizer Other information: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all commercial vehicles: Optional 12 or 24 months Mercedes-Benz used vehicle warranty available by request. * We are happy to take your current vehicle in part exchange, offset it against your new vehicle, or purchase it from you directly. * Leasing and financing options available through Mercedes-Benz Bank. We are happy to provide a quote. * No liability for typographical or printing errors * Subject to error and prior sale ----.

Condition: used, mileage: 35 km, power: 110 kW (149.56 HP), first registration: 06/2024, fuel type: electric, overall weight: 7,490 kg, next inspection (TÜV): 05/2028, color: grey, gearing type: automatic, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,150 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 153409 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (Postal code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Heated side mirrors * Traction tires on rear axle Interior * Driver’s comfort air-suspension seat, heated * Automatic climate control Safety * Driver airbag Comfort and Environment * Reversing warning system Additional Features * 2-DIN 7" touchscreen radio including Apple CarPlay, Android CarPlay, and hands-free system * Reinforced vehicle battery, 2 x 80 Ah (dual batteries) * Manual engine speed controller * Rear underrun protection * Includes roll-off container 4000 x 2150 x 500 mm * Heated leather steering wheel * Metallic paint finish * Hire purchase/financing or leasing via Daimler Truck Financial Services Germany (DTFSD) possible. We are happy to provide you with an offer. * Engine variant B "zero emission", eCanter * Mechanical power take-off (mPTO) * Payload: 3,195 kg * Palfinger telescopic roll-off tipper * Fleet Management System (FMS) interface * Fuso safety package incl. floor mats * Mirror bracket, medium length * Day registration to Daimler Truck AG * Laminated windscreen, green-tinted, heated * Rear axle stabilizer Miscellaneous: Dodpfoy Acwdox Anwsut * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all transporters: 12 or 24 months Mercedes-Benz used vehicle warranty available upon request. * We are happy to take your current vehicle in trade, offset it against the new one, or pay you the purchase price. * Leasing/financing through Mercedes-Benz Bank. We are happy to make you an offer. * No liability for printing or typographical errors * Subject to prior sale and errors

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Manufacturer: Norweld, drying oven with isolation transformer -Type: ES 2 -Usable space: Ø 100 x 430 mm -Number: 2x drying ovens available Dodsyuvp Aspfx Anwsut -Price: per piece -Transport dimensions: 520/230/H560 mm -Weight: 14 kg/pc.

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible Dsdpfx Anjyuut Howsut -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Condition: used, mileage: 58,594 km, power: 129 kW (175.39 HP), first registration: 08/2023, fuel type: diesel, empty load weight: 4,017 kg, maximum load weight: 3,183 kg, overall weight: 7,200 kg, tire size: 225/75 R16, axle configuration: 4x2, wheelbase: 5,100 mm, next inspection (TÜV): 08/2025, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 35 m³, loading space length: 6,080 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, CERTIFIED PRE-OWNED Plus, color white IC 194, body manufacturer: Saxas, unladen weight: 4017 kg, permissible total weight: 7200 kg, cargo area (L W H): 6,080 mm x 2,480 mm x 2,380 mm, 1st axle: 225/75 R16, fabric seats, leaf suspension, 1 x airbag, tail lift: Dhollandia DHLMQ.10, digital tachograph, Electronic Stability Program (ESP), Traction Control System (ASR), automatic climate control, hydraulically damped driver’s seat, driver’s armrest, dual passenger bench seat, radio, digital radio receiver (DAB), USB port, Bluetooth hands-free preparation, lane departure warning, power steering with City function, adjustable steering column, electric windows, outside temperature display, electrically adjustable and heated exterior mirrors, immobilizer, central locking with remote control, tinted windows, spare wheel, daytime running lights, cup holder, speed limiter: 90 km/h, plywood box: Saxas MKD 61ME. Dhollandia DHLMQ.10 tail lift with 1,000 kg lifting capacity. 2 rows of lashing rails. Lashing rings in the cargo floor. Front wall impact protection. Grab handle on A-pillar. Central storage compartment with USB charging port. Technical reconditioning prior to vehicle handover, including maintenance service according to maintenance interval, and new general inspection (HU). Optional at additional cost: 1-year used vehicle warranty from mobile. Truck Performance Package 60 with deductible. For further inquiries, Jan Furtak will be happy to assist you. Tel. . Errors and changes excepted. Sale to commercial customers only. Former rental vehicle. Dodpfxexuy Sys Anweut

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Duedpoyt Spcefx Anwst

Year of construction: 2002, condition: used, functionality: fully functional, Machine for cutting aluminium and copper pipes with the option for pipe end processing. Dsdpfx Aoyt Spponwout

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 24,000 rpm, overall weight: 545 kg, spindle motor power: 4,000 W, number of axes: 3, This 3-axis T-Rex Servo-0609 was manufactured in 2023. It features a CNC portal milling machine with a KinetiC-NC control system and PC software. The travel dimensions are 900 mm (X) × 600 mm (Y) × 200 mm (Z). It includes a Hiteco 4.0 kW ATC spindle, air-cooled, with a 24,000 rpm and an automatic 4-fold tool changing station. Consider the opportunity to buy this T-Rex Servo-0609 gantry milling machine. Contact us for more information about this machine. Additional equipment • Accessories: Electronic handwheel, Gigabit network switch (5 ports) Dodjx H A Nnopfx Anwout Machine Benefits Technical Machine Benefits • Drive: servomotors with automatic lubrication • Clamping system: vacuum plate with t-slot rails • Tool change: 4-fold changing station (iso30), automatic (atc) • Tool holder: 6× sk30/er32 with nuts and tightening bolts • Single collet er32 (3. 175 mm, 0. 0006” concentricity) • Vacuum generation: side channel blower 2. 2 kw (520 mbar, 155 m³/h) • Transportation: box dimensions: 175 × 180 × 200 cm Extra Information Machine still under power

Condition: used, Year of construction: 2017, Simex T300 (FT300) attachment trenchers suitable for skid steer loaders! ----* Manufacturer: Simex * Model: T300 (FT300) * Year: 2017 * Unused / Stock equipment * Multiple units available (3 x) * Suitable for skid steer loaders * Cutting depth: 30 cm * Weight: 845 kg * Max. operating pressure: 215 bar * Price: €8,900 net + 19% VAT. ----For further questions, please call: Erik Kortum: WhatsApp Dujdpsyx Rr Ujfx Anwet All information is provided without guarantee or warranty. Errors and interim sale excepted.

Condition: used, maximum load weight: 2,820 kg, overall weight: 4,500 kg, axle configuration: 1 axle, first registration: 06/2010, loading space length: 8,100 mm, total width: 2,550 mm, total height: 3,850 mm, Vehicle description: For sale is a well-maintained Müller curtain side and post trailer in very good technical condition Features & details: * Manufacturer: Müller FZ-Bau Duedpfx Ajxar Ahsnwot * Model: SDAH Curtain Side & Post Trailer * Year of manufacture: 2010 * Twin axle * Gross vehicle weight: 4,500 kg (upgradable to 5,500 kg) * Unladen weight: approx. 1,820 kg * Payload: approx. 2,680 kg * Tyres: 235/75 R17.5 143/141J * Inspection / TÜV: valid until * Very stable build with curtain side and posts Condition: * Well-maintained, immediately ready for use * No known defects

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately Dujdpfx Aow Nygnjnwst 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries Djdpfxjw Nyfwe Anwout 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*