Used Tns for sale (128)

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine -Tailstock -Various powered tool holders -Three-jaw chuck -Tool holder Njdpfx Alozpf I Aoaold -Complete documentation Errors and omissions excepted.

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Nljdpfot Hwq Dsx Alaed Very large spindle bore, with bar loading device Please ask for further details.

Condition: ready for operation (used), A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Nledoznmxgopfx Alaed

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck Nljdpozakgtofx Alaed 620mm swing 1000mm between centres 10 station turret Tailstock Coolant pump and tank Swarf conveyor

Condition: not inspected (used), Max dia Nsdpfjzi Hrvox Alasld 180 mm Max worklength 490 mm Diametre of spindle bore 60 mm Digital screen * Power needed 39 kW Long 2800 mm Wide 2130 mm Height 2090 mm Weight 4500 kg ACCESORIES * Coolant pump 1,5/5 bar-125 L

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min Njdpsu Ix N Sefx Alaold spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Year of construction: 1982, condition: ready for operation (used), General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible. Nsdey I Adbjpfx Alaeld

Condition: good (used), Technical Data for Pallet Racking System: Racking System: Arestant Type: NS Installation Specifications: Number of rack rows: 1 unit Length per rack row: 16,760 mm Number of bays per rack row: 6 units Number of levels incl. ground level: 3 units Volume Specifications: Pallet positions per bay: 9 units Pallet positions per rack row: 36 units Total pallet positions: 36 units Note: The images are for illustrative purposes only. Quantities shown may differ from the actual scope of supply! Scope of Delivery Includes: 07x Pallet rack uprights, used Color: sendzimir galvanized Profile dimensions: 80 x 70 x 2 mm Incl. horizontal and diagonal braces, baseplates Uprights are pre-assembled (bolted truss structure) 6,005 mm high 800 mm deep 36x Pallet rack beams, used Color: orange Nsdpfx Asw Tkmaelasld Beam type: M14051 Box profile: 142 x 50 mm Connector: 4 HK (hooks) Clear span: 2,700 mm 72x Safety pins, used Color: sendzimir galvanized For securing the longitudinal beams against accidental lifting 28x Anchor bolts, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 14x Shims, used Finish: fully galvanized For leveling rack uprights placed on uneven floors 01x Load sign With details for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. If transport or shipment of this item is required, additional costs will apply. These can be provided separately, depending on delivery location and scope, upon request.

Condition: good (used), Included in the delivery: 01x Base plate, new Manufacturer: Arestant NS Type designation: STD Base Plate BP80 Material finish: Sendzimir galvanized For frame profile width: 80 mm Material thickness: 6.00 mm Total width: 118 mm Total depth: 150 mm Height: 45 mm Number of mounting holes: 03 pcs. Hole diameter: 13 mm Weight per unit: 0.83 kg / pc. Nsdpexgp E Tofx Alajld Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us depending on the delivery location and scope of supply.

Condition: good (used), clear span: 2,700 mm, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the pallet racking traverse: Racking system: Arestant Type: NS The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 100 x 50 mm Beam type: 10515CN Bracket: 4 HK (hooks) Clear width: 2,700 mm max. load per pair of beams 1,500 kg, with evenly distributed load. ( observe bay load ) 02x locking pins, used Version: completely galvanized For securing the side members against unintentional lifting out General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading) Njdpfxovi Erro Alasld

Condition: good (used), clear span: 2,250 mm, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the pallet racking traverse: Racking system: Arestant Type: NS The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 100 x 50 mm Beam type: 10515CN Bracket: 4 HK (hooks) Nledpfxevi E Dho Alajd Clear width: 2,250 mm max. load per pair of beams 1,500 kg, with evenly distributed load. ( observe bay load ) 02x locking pins, used Version: completely galvanized For securing the side members against unintentional lifting out General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), clear span: 3,300 mm, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data for the pallet racking traverse: Racking system: Arestant Type: NS The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 100 x 50 mm Beam type: 10515CN Bracket: 4 HK (hooks) Clear width: 3,300 mm max. load per pair of beams 1,500 kg, Nedpfevivw Sex Alaeld with evenly distributed load. ( observe bay load ) 02x locking pins, used Version: completely galvanized For securing the side members against unintentional lifting out General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) Assembly and installation Our general assembly conditions must be observed Shelf inspection Rack inspection in accordance with DIN EN 15635 carried out in accordance with the Requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: new, AXDL160ZGR22-D-1000-1340-E0-00XX-C-A, NTN SNR planetary gearbox Njdpfx Aovrhtdjlajld Model: AXDL160ZGR22-D-1000-1340-E0-00XX-C-A Condition: New

Condition: new, Transformer 220 V mono to 380 V tri Power converter: 10 kW New, never used Nodpszm St Hjfx Alajld Dimensions (L x W x H): 800 x 600 x 500 mm

Condition: ready for operation (used), LTN Servotechnik SC100-02 / 04-L07 / L16 slip ring SN:16419395, used, normal signs of use, 100% functional, scope of delivery as per photos Nedpfxomvkpbo Alaold

Condition: ready for operation (used), Year of construction: 1989, turning diameter over cross slide: 340 mm, turning length: 560 mm, turning diameter: 560 mm, spindle bore: 63 mm, overall weight: 5,500 kg, Fanuc OT Length capacity: 560 mm Diameter over slide: 340 mm, turning diameter: 560 mm Turret: 10 stations Spindle: 11 kW Chip conveyor Nledpozbam Eofx Alajd

Condition: used, mileage: 144,000 km, power: 177 kW (240.65 HP), first registration: 11/2011, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, all wheel drive, Special equipment: Trailer brake 2 - line, trailer coupling: towing coupling, trailer coupling: G 145, trailer socket 24V / 15-pole, audio system: CD radio (Bluetooth), differential lock front axle, cab variant: S (short with extended rear wall), electric window lifts, heated windshield, graphic info display with eco-meter, air dryer 1 chamber, heated, engine PTO front with tandem pump, parameterizable special module, reversing warning system acoustic (warning signal outside), rear window, seats in cab: driver's seat comfort suspension seat, sun visor outside, stabilizer rear axle reinforced (for extremely high load), stabilizer front axle reinforced, steel rims 11.00x20.0. Additional equipment: Njdpfszaxthox Alaeld Emission standard EURO 5, axle configuration: 4x4, exterior mirrors electrically adjustable and heated, battery 115 Ah, cockpit distributor, sunroof (steel), differential lock rear axle, cab: tilting mechanism hydraulic, cab: S (short), suspension: leaf / leaf, generator 80 A, transmission 6-speed - type: G 60-6, urea tank (AdBlue): 25 liters, rear axle H 4, crown wheel 410, hydraulic steering gear LS 6 / LS 8, interior filter: pollen filter, body / superstructure: tipper, fuel tank: 125 liters, model update Atego 2, engine 6.4 liters - 175 kW diesel (OM 906 LA), engine start / stop system, engine brake with constant throttle, auxiliary drive MB 2C, auxiliary drive MB 60-2C with MPA, wheelbase 3260 mm, SCR system (AdBlue technology), side impact protection, seats in cab: passenger single seat, fixed, drum brake front and rear axle, underrun protection rear fixed, transfer case - VG 550 - 3W, immobilizer, permissible total weight 13.50 t.

Condition: good (used), functionality: fully functional, machine/vehicle number: 24732, Ficep 1105 punching machine, 110tns, multifunction machine, punching 30 x 25, shear 510 x 16mm, 400 x 19mm, 300 x 22mm, 200 x 25mm, 90º angle cutting 150 x 150x16mm, 45º angle cutting 100 x 10 mm, round and square cut 50mm, punching max diameter 32 thickness 26mm, with several working elements, with electric stop, with different accessories, in good condition Nledpfx Aetvfcmjlajd

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Nledpfx Aljzizrkeajd Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, We are offering this like-new Focke HMP cardboard case packing machine, manufactured in 2021. The Focke HMP (Highly Modular Packer) is a compact and modular packaging machine from FOCKE & CO, which combines the erecting, grouping, filling, and closing of cardboard boxes on a single platform. It packages products such as trays, wrap-around cartons, or trays with lids at a high speed. Year of manufacture: 2021 Serial/Documentation number: 21570 Power supply (customer) – Voltage: 3 × 400 V Mains frequency (customer): 50 Hz Rated current: 25 A Rated short-circuit switching capacity (Icu): 10 kA Minimum single-phase short-circuit current: 0.35 kA Protective grounding system (customer): TN-S Power supply (machine) – Voltage: 3 × 400 V Mains frequency (machine): 50 Hz Nlodpfozncw Sox Alajd Control voltage: 24 V DC Protective grounding system (machine): TN-S If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Nlodpfx Asxhf Hiolaod Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1810 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h Njdszim Ecspfx Alaeld • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, mileage: 1 km, power: 353 kW (479.95 HP), tire size: 325/95 R 24, axle configuration: 6x6, wheelbase: 3,900 mm, fuel tank capacity: 590 l, color: white, driver cabin: sleeper cab, emission class: euro2, suspension: steel, Year of construction: 2026, = Additional options and accessories = - 1 fuel tank - PTO Nedpfjzl Uagsx Alajld = More information = Cab: TN Tyre size: 325/95 R 24 Brakes: drum brakes Suspension: leaf suspension Number of cylinders: 6 Number of berths: 1 Engine type: in-line Gearbox type: TipMatic

Condition: good (used), PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 Nlsdpfx Asrb E Ewelasd -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump -Manufacturer: Rietschle, rotary vane vacuum pump type KTA 80/1 (08) TN -Suction capacity: 80 m³/h -Pressure: 0.71 / -0.6 bar -Drive: CSM 4 kW / 1420 rpm -Dimensions: 840/420/H310 mm -Weight: 101 kg Nedezhkfwopfx Alajld