Used Tns for sale (128)

Condition: used, CUT-TO-LENGTH LINE IPM 1250x1.5x15 Technical data Thickness range: 0.4 – 1.5 mm Coil Width: 350 - 1250 mm Coil weight: 15 Tn Coil outer diameter: max. 1580 mm Coil inner diameter: 508 - 610 mm End sheet length: 400 - 5000 mm Scope of supply 1. Uncoiling cantilevered mandrel with hold down roll 2. Guiding table 3. Levelling machine 4. Loop pit with tiltable covers 5. Start-stop shear 6. Band conveyor 7. Stacker for 400 – 5000 length bundles 8. Switch cabinets & control desks 9. Hydraulics Lodeymb Arspfx Afuort 10. Existing documentation 11. Hydraulics Thickness range: 0.4 – 1.5 mm Coil Width: 350 - 1250 mm Coil weight: 15 Tn Coil outer diameter: max. 1580 mm Coil inner diameter: 508 - 610 mm End sheet length: 400 - 5000 mm

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Lrodpjymax Eofx Afuet Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: new, mileage: 1 km, power: 353 kW (479.95 HP), tire size: 325/95 R 24, axle configuration: 6x4, fuel tank capacity: 590 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel, Year of construction: 2026, Equipment: onboard computer, - 1 fuel tank - Autoradio - PTO - Sun visor MAN TGS 40.480 6x4 BB SA Tractor Head | 480 HP | EURO-5 | Heavy-Duty | STOCK The MAN TGS 40.480 6x4 BB SA Tractor Head is for sale and configured for professional heavy transport, machinery haulage, construction logistics, industrial transport and demanding semitrailer operations. Powered by the proven MAN D26 6-cylinder EURO-5 diesel engine producing 480 HP / 353 kW and 2,300 Nm of torque, this heavy-duty MAN tractor combines a robust 6x4 drivetrain with two driven planetary rear axles, differential locks on both driven rear axles, heavy-duty leaf-spring suspension and the MAN TipMatic 12.28 OD automated transmission. Designed specifically as a heavy-duty semitrailer tractor, the MAN TGS 40.480 combines a technically permissible gross vehicle weight of up to 40,000 kg with a technical gross train weight of 56,000 kg, extending to 86,000 kg Technical Load Plus. Its heavy-duty chassis, warm-country configuration, raised engine air intake, engine air pre-separator, reinforced driveline, large 325/95 R24 tyres and specialised semitrailer equipment make this MAN TGS particularly relevant for international heavy transport operations where traction, durability and load capability matter. Available through Schaften Automotive for worldwide export. QUICK HIGHLIGHTS - MAN TGS 40.480 6x4 BB SA - Heavy-Duty Semitrailer Tractor - MAN D26 6-Cylinder Diesel Engine - EURO-5 Emission Standard - 480 HP / 353 kW - 2,300 Nm Torque - MAN TipMatic 12.28 OD Transmission - 6x4 Drive Configuration - Two Driven Rear Axles - Differential Locks on Both Driven Rear Axles - Heavy-Duty Planetary Rear Axles - 16,000 kg Technical Capacity per Rear Axle - Leaf / Leaf Suspension – BB Configuration - 3,900 mm Main Wheelbase - 1,400 mm Rear Axle Spacing - Up to 40,000 kg Technical Gross Vehicle Weight - Up to 56,000 kg Technical Gross Train Weight - Up to 86,000 kg Technical Load Plus Gross Train Weight - JOST JSK 38 C 3.5" Fifth-Wheel Coupling - Gearbox-Dependent MAN NH/4c PTO - 400-Litre Steel Fuel Tank - 35-Litre AdBlue Tank - Warm-Country Vehicle Configuration - Raised Engine Air Intake Behind Cab - Engine Air Intake Pre-Separator Lrsdpfsz Etquex Afujt - Reinforced Driveline Propshafts - 325/95 R24 Tyres - Twin Rear Tyres - MAN EVBec High-Performance Engine Brake - EBS & ABS Braking Systems - ADR Type AT Equipment Configuration - MAN TN Cab - Air Conditioning - Cruise Control - Air-Sprung Comfort Driver's Seat - Driver's Bunk - Left-Hand Drive - Designed for Heavy Transport & International Operations - Available for Worldwide Export Built for Serious Heavy Transport Heavy transport requires much more than engine power alone. A tractor operating with demanding combination weights must bring together engine torque, drivetrain strength, traction, axle capacity, cooling, chassis stability and the correct semitrailer equipment. The MAN TGS 40.480 6x4 BB SA has been configured around exactly those requirements. The vehicle is classified as a dedicated Semitrailer Tractor (SA) and uses a heavy chassis configuration developed specifically for heavy transport applications. Its 6x4 drivetrain transfers engine power through two driven rear axles, while differential locks on both driven rear axles provide...

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 41.520 8x8 with Fassi F705R.2.6 Loading Crane MAN Equipment: * TGS 41.520 8x8 BB CH * 382 kW (520 hp) * TN driver’s cab * Main wheelbase: 2980 mm * 2 batteries, 12 V, 175 Ah * 390 l fuel tank capacity, left side * 35 l AdBlue tank capacity, right side * Air compressor, 1-cylinder, 360 cc * Pneumatically controlled compressed air preparation * Full braking assistant * MAN EVBec high-performance engine brake, multi-stage * Drum brakes Lsdpfx Afoywfv Sjujrt * MAN D2676 LF78 diesel engine, 375 kW (510 hp) output, 2,600 Nm torque, Euro 6d * Fuel pre-filter with oil/water separator * Automatic transmission * Front axle tyres: 385/65R22.5 * Rear axle tyres: 315/80R22.5 * Differential locks on driven front axles * Differential locks on driven rear axles * Mechanically operated roof hatch * Central locking with remote control * LED daytime running lights * 2 rotating beacons on cab roof, one right and one left * 2 work lights on cab roof, one right and one left * Exterior mirrors, electrically adjustable with manoeuvring assistance, heated * Preparation for 2 cameras, one linked to reverse gear * Driver’s seat heating * Driver comfort seat, air-sprung * Multifunction steering wheel, height and tilt adjustable * 2 sockets, centrally in cab, 12 V and 24 V * Air conditioning, Climatronic * Auxiliary water heater, 4 kW * Interior front windscreen sun visor, foldable * Side window sun blinds * MAN Media System Navigation Advanced 7" * MAN Sound System Advanced with subwoofer * Navigation maps for Europe and Russia * Smartphone integration * Cab topcoat painted in REINWEISS RAL 9010 Crane Equipment: * FASSI F705R.2 TECHNO loading crane * Infinite slewing range * Double knuckle system with PROLINK (knuckle arm can be overextended up to 10°) * Electronic overload protection with FX900 * FASSI stability control FSC-SII incl. LMB II * Emergency stop and optical alarm (at 90% and 100%) * XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) * Radio remote control with linear levers and display of pressure values (in bar and %) * Emergency controls for crane operation * Separate hydraulic tank (260l) with filter and oil cooler mounted at crane base * Hydraulic outriggers, extendable on both sides, support width 8.29m * Outriggers operable via remote control * Standard paint RAL 3020 traffic red – all cylinders painted black * Load hook and mounting brackets (short/500 mm) The complete vehicle specification is available upon request. We are happy to provide further information on request.

Condition: used, mileage: 1,126,054 km, power: 265 kW (360.30 HP), first registration: 06/1999, fuel type: diesel, overall weight: 26,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 6x4, wheelbase: 4,600 mm, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, low noise, parking heater, seat heater, spoiler, trailer coupling, Vehicle location: Bovenden, Lg. House, 1x air seat, 1x couch, seat heating, electric mirror, heated mirror, electric window right, air conditioning, sun visor, cruise control, center console, auxiliary heating, switch 16, ABS (anti-lock braking system), roof spoiler, central lubrication system, differential lock, work lights, leaf suspension, tow bar air-light-hydr., low-noise G1, environmental badge red Lredpfxsvhg Ire Afust Wheelbase: 4600 mm 6-cylinder engine, 8.0 tn front axle ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Lodpfx Afjx Ihiijujrt Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology Lrodpowb A Hijfx Afuet ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages Lsdpfx Ajy Uhxksfuort - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 41.520 8x8 with Fassi F705R.2.6 Loading Crane MAN vehicle equipment: * TGS 41.520 8x8 BB CH * 382 kW (520 HP) * TN driver’s cab * Main wheelbase: 2,980 mm * 2 batteries, 12 V, 175 Ah * 390-litre fuel tank, left * 35-litre AdBlue tank, right * Air compressor, 1 cylinder, 360 ccm * Pneumatic air processing unit * Emergency braking assistant * MAN EVBec high-performance engine brake, multi-stage * Drum brakes * MAN D2676 LF78 diesel engine, 375 kW (510 HP), 2,600 Nm torque, Euro 6d * Pre-fuel filter with oil/water separator * Automatic transmission * Front axle tires: 385/65R22.5 * Rear axle tires: 315/80R22.5 * Differential locks on driven front axles * Differential locks on driven rear axles * Mechanical roof hatch * Central locking with remote control * LED daytime running lights * 2 rotating beacons on cab roof (1 right, 1 left) * 2 work lights on cab roof (1 right, 1 left) * Exterior mirrors, electrically adjustable with maneuvering feature, heated * Prewiring for 2 cameras, one linked to reverse gear * Driver’s seat heating * Comfort driver’s seat, air-suspended * Multifunction steering wheel, height and tilt adjustable * 2 power sockets (12 V and 24 V) in cabin center Lrjdpfx Ajywfw Aefust * Air-conditioning system, Climatronic * Additional water heater, 4 kW * Folding interior sun visor (windscreen) * Sunblinds for door side windows * MAN Mediasystem Navigation Advanced 7 inch * MAN Soundsystem Advanced with subwoofer * Navigation maps for Europe and Russia * Smartphone integration * Cab finish: PURE WHITE RAL 9010 Crane equipment: * FASSI F705R.2 TECHNO loading crane * Continuous slew range * Dual linkage system with PROLINK (overextendable jib up to 10°) * Electronic overload cut-off device with FX900 * FASSI stability control FSC-SII incl. LMB II * Emergency shut-off as well as visual alarm (90% and 100%) * XF System (Extra Fast) + XP System (Extra Power) + FL ? System (Full Lift) * Radio remote control with linear levers and display of pressure values (in bar and %) * Emergency manual control for crane * Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base * Hydraulic outriggers, extendable on both sides, support width 8.29 m * Outrigger operation by radio remote * Standard color RAL 3020 traffic red – all cylinders painted black * Load hook and mounting brackets (short/500 mm) Full vehicle equipment available on request. For further information, please feel free to contact us.

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes Lodpfx Aoymaw Usfuert - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: used, Year of construction: 1998, functionality: fully functional, Machine Type: Automatic hot foil stamping and die-cutting machine Year: 1998 Manufacturer: Yawa Maximum Sheet Size: 780 mm x 540 mm Maximum Die-Cutting Pressure: 120 tons (or 144 Tn) Processing Speed: Up to 5,500 sheets per hour Hot Foil Stamping Features: 6-zone heating system Can process both longitudinal and transverse foils Material Thickness: From 90 to 600 gsm Other Features: Lredjxg Hzfepfx Afuot Front and side lays Non-stop feeder and delivery options Includes chases for both die-cutting and stamping

Year of construction: 1994, condition: used, Technical data: - Manufacturer: Cefla with cross axle - Type: TN/L Lrjdoya H Hiepfx Afuot - Length: 1740 mm - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: used, Automatic rebar mesh welding machine MCC001 Lodjymcpyspfx Afuert The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Minimum step between longitudinal bars: 100mm Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Pneumatic indicators: Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Lrsdsx Ihg Iopfx Afust Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg Lrjdpfsrb E Ewex Afuet

Condition: excellent (used), Brand : CORREA Model : PRISMA-20 Type : CNC Cnc : HEINDENHAIN 530 Lsdex Dzf Topfx Afujrt Table dimensions : 2.000 x 900 mm Number of slot: 5 x 22 mm Distance between T slots: 200 mm Axis travels (X,Y,Z) : 2.000 x 1000 x 1000 mm Head type : Universal manual Taper : ISO 50 Speed range : 550 - 3.000 Spinale power : 22 kw Rapid traverse (X) : 12.000 mm/min Rapid traverse ( X) : 20.000 mm/min Maximum weight on table : 3.500 kg Machine weight : 14 tn Machine equipped with: Fairing Electronica hadwheel

Condition: used, BRET Press blanking line 830x4 Technical characteristics Width: 100 - 830 mm Thickness: 1 - 4 mm Max. weight: 20 Tn Exterior diameter: 900 - 2100 mm Interior diameter with segments: 610 mm Interior diameter without segments: 508 mm Decoiling: from top or from bottom Engine power: 55 kW Elastic yield (for max. thickness): 650 Rm (Mpa) Tensile strength (for max thickness): 900 Rm (Mpa) Scope of supply 1. 4 arms coil loader turnstile 2. Coil carriage 3. Single cantilevered decoiler with hold down roll 4. Opener & centring unit 5. 17 rolls leveller 6. Pit accumulator entry basket 7. Exit basket and pulling unit 8. A 700 tons Press 9. Press side exit (2 bands) 10. Double traverse conveyor with deviation and tilting unit 11. Main stacker 12. Side tacker #1 13. Rollway at stacker’s exit #1 14. Side stacker #2 15. Rollway at stacker’s exit #2 16. Video inspection camera system 17. Pallet introduction rollways for side stackers 18. Magnetic scrap conveyor 19. Operator desks 20. Switch cabinets 21. Hydraulics 22. Existing documentation (to be checked) 23. Available spare parts DELTA Measuring system · Number of measured edges: 2 · Width capacity: 100 - 800 mm BRET Leveller · First level rolls: Ø 55 mm · Number: 17 · Thickness: 0,8 - 4 mm · Driving Power: 110 kW Press · Size of press: 800 mm · Blank length: 100 - 1790 mm · Length tolerances: +/- 0,25 mm · Pressure: 320 Tn · Maximum speed: 100 m/min Cuts/min with tensile strength = 500 Mpa · 130 cuts/min for minimum length · 80 cuts/min for 500 mm · 52 cuts/min for 1.000 mm · 38 cuts/min for 1.500 mm Engine power: 55 kW Stacker by gravity · Number of tables: 1 · Length: 1750 mm · Chain conveyor · Positions per table: Length 5 & Width 3 · Maximum stacking height (including wood): 650 mm Lsdsymbg Dspfx Afuort · Kind of pallets: Wood spacers / Square + plank / Square + square · In-line weighing Side stackers by gravity · Number of exits: 2 bands · Length 100-800 · Tilting device · Stacker height 650 · Buffer system while changing stacking column · Pallet input front the back side · Scale In both exits Magnetic scrap conveyor Video inspection system Width: 100 - 830 mm Thickness: 1 - 4 mm Max. weight: 20 Tn Exterior diameter: 900 - 2100 mm Interior diameter with segments: 610 mm Interior diameter without segments: 508 mm

Condition: used, Automatic packing machine Manufacturer : MAIR Model : .90.D.5.SL Ljdpfxevtp Hbo Afuert Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Condition: new, Year of construction: 2026, machine/vehicle number: N2097535010017, Basic machine G350 access-SERIE - FACTORY | NEW MACHINE - Lrsdpsqqi Dkofx Afuot Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 770.0 mm Travel path of the Z-axis 805.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Stainless-steel internal work area enclosure HEIDENHAIN TNC 640 with GROB4Pilot access Control panel at tool loading and unloading position Tilting table unit (A'-axis) Rotary table with T- slots (B‘- axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Scraper conveyor , discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (4 kW) Compressed air feed through spindle center Air gun at the work area Flush gun at the work area Flushing unit (Z- axis) Compressed air cleaner bar for safety screen in work area door Rotary distributor in B'-axis rotary table with hose installation Remote machine diagnostics with access control switch 12 month warranty

Condition: used, mileage: 138,200 km, power: 316 kW (429.64 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space volume: 46 m³, loading space length: 7,380 mm, loading space width: 2,490 mm, loading space height: 2,530 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, Tail lift Bär 1,500 kg, 1,800 mm. * Refrigeration unit Thermo King T-1000 R, diesel + 380 V, temperature recorder. * Full service history ----Deep-freeze box body Lamberet. ATP/FRC certified. ----* 12-speed automatic transmission * Box body with rear doors and tail lift * MAN EasyStart (hill-hold assist) * MAN EVBec (electronically controlled exhaust valve brake) * Front axle air suspension * Rear axle differential lock * Traction control system (ASR) * Rear axle air suspension * Anti-lock braking system (ABS) * Emergency braking assistant (EBA) * Two-line trailer brake system (EC) * Retarder * Electronic stability program (ESP) * Disc brakes * Full brake assistant * Driver attention warning MAN AttentionGuard * Electrically operated sliding/lifting glass sunroof * Battery main switch * Lane departure warning (LDW) * External transparent sun visor * Electrically adjustable and heated exterior mirrors * Electric windows for driver and passenger doors * TN cab – the flexible cab (narrow, long, standard height) * Cab suspension air-sprung * Central locking with remote control * Immobilizer (transponder) * MAN TipMatic 12 28 OD transmission * Automatic climate control * Auxiliary hot water heating * 590-liter fuel tank * Fog lights * Euro 6 E engine version * Engine version with AdBlue * Aluminum cargo floor * Towing hitch (jaw/maul type) * Air-sprung driver’s seat * Cornering light * Lower bunk * Adaptive cruise control (ACC) with stop-and-go function * Load securing rails Lrjdpfx Ajx Dn R Njfujt * Refrigerator drawer under the bed * EBS * No spare wheel ----Sale to business customers only! No guarantee for the above information! Subject to prior sale! Our general terms and conditions exclusively apply! We are happy to provide you with a leasing or financing offer.

Condition: refurbished (used), Kaltenbach circular saw completely overhauled. Lredovn Ic Rspfx Afujt TECHNICAL DESCRIPTION KKS 400 KKS 400 Semi-automatic, hydraulic universal circular saw with rotary table for miter cuts SAW BLADE Segment saw blade Saw blade holder according to DIN 8576 ☒ 400 x 4 ☐ 450 x4 mm 50/4x14/80 mm WORKING AREA Round material 90/45° 125 150 mm Square material 90° 115 140 mm 45° 110 130 mm Flat material 90° 305 x 40 330 x 40 mm 45° 235 x 30 250 x 40 mm U-profiles standing 90/45° 120 x 55 140 x 60 mm lying 90° 240 x 85 280 x 95 mm 45° 180 x 70 220 x 80 mm Cutting lengths from 10 mm DRIVE POWER Saw motor 1.8/2.7 kW Hydraulics 1.5 kW Coolant pump 0.1 KW CUTTING SPEEDS (standard) 11.5/23 13/26 m/min or 10/20 11/22 m/min or 13/26 15/30 m/min SAW BLADE FEED continuously adjustable according to table 0 - 1,000 mm/min Saw blade rapid return 3,300 mm/min ELECTRICAL CONNECTION TN-S system - 3 phases, neutral conductor, earth 400/50 V/Hz WEIGHT Machine without accessories approx. 820 kg

Condition: new, Year of construction: 2024, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clamping for fixtures - High pressure cutting fluid system (80 bar) _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Machine cooling system with a air-cooled cooling unit (20 kW) SIEMENS SINUMERIK 840D sl with machine control panel GROB4Pilot access Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication (GROB) GROB spindle diagnostics GSD Rotary table with GROB pallet clamping system (B-axis) Double disk-type tool magazine HSK-A 63 with 117 (57|60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Pallet change system for two pallets Setup station rotated manually Setup station door, manually-operated, for manual loading/unloading Pallet, 500x500 mm, grid with tapped holes Equipping the pallet with 4 fluid connections Scraper-type conveyor, for larger quantities, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flush gun at the work area Part clamping system in work area - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Part clamping system in setup station of pallet changer - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Preparations for using infrared touch probe OMP60 (RENISHAW) Lsdjr Nbzxjpfx Afuort Rotating inspection glass for work area door Remote machine diagnostics with access control switch 12-month warranty

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 41.520 8x8, F705R.2.7 L436 V20 TECHNO MAN Equipment: * TGS 41.520 8x8 BB CH * 382 kW (520 hp) * TN cab * Main wheelbase 2,980 mm * 2 batteries, 12 V, 175 Ah * 390 l diesel fuel tank, left side * 35 l AdBlue tank, right side * Air compressor, 1-cylinder, 360 cc * Pneumatically controlled air processing system * Advanced Emergency Braking System (full brake assist) * MAN EVBec high-performance engine brake, multi-stage * Drum brakes * MAN D2676 LF78 diesel engine, 375 kW (510 hp) power, 2,600 Nm torque, Euro 6d * Fuel pre-filter with oil/water separator Lredpfjywfw Nex Afust * Automatic transmission * Front axle tires: 385/65R22.5 * Rear axle tires: 315/80R22.5 * Differential locks on driven front axles * Differential locks on driven rear axles * Mechanical roof hatch * Central locking system with remote control * LED daytime running lights * 2 rotating beacons on cab roof, 1 right and 1 left * 2 work lights on cab roof, 1 right and 1 left * Exterior mirrors, electrically adjustable with maneuvering aid, heated * Preparation for 2 cameras, one linked to reverse gear * Driver's seat heating * Driver comfort seat, air-suspended * Multifunction steering wheel, adjustable for height and tilt * 2 power sockets in center of cab, 12 V and 24 V * Air conditioning, Climatronic * Additional water heater, 4 kW * Interior folding sun visor for windshield * Sun roller blinds for door windows * MAN Media System Navigation Advanced 7 inch * MAN Advanced sound system with subwoofer * Navigation maps for Europe and Russia * Smartphone integration * Cab finished in pure white, RAL 9010 Crane Equipment: * FASSI loader crane F705R.2.7 L436 V20 TECHNO * Infinite slewing range * Dual linkage system with PROLINK (overbending articulated arm up to 10°) * Electronic overload shutdown with FX900 * FASSI Stability Control FSC-SII incl. LMB II * Emergency stop and visual alarm (at 90% and 100%) * XF System (Extra Fast) + XP System (Extra Power) + FL – System (Full Lift) * Radio remote control with linear levers and display of pressure values (in bar and %) * Emergency manual control for crane operation * Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base * Hydraulic outriggers, extendable on both sides, support width 8.29 m * Outriggers operable via radio remote control * Standard color RAL 3020 traffic red – all cylinders painted black * Load hook and fastening clevises (short / 500 mm) The complete vehicle specification is available upon request. For further information, please do not hesitate to contact us.

Condition: excellent (used), TECHNICAL CHARACTERISTICS Capacity: Chuck diameter: 3.000 mm Maximum turning diameter: 3.110 mm Maximum piece weight: 20 Tn Revolutions: 1,5-39,5 Rpm Main motor power: 45 Kw Movable crossbeam: 1.200 mm Height under crossbeam: 1.800 mm Vertical lathe with two arms: Right carriage pentagonal turret 5 positions with automatic rotation X travel: 1,500 mm Z travel: 965 mm Left slide with RAM Travel X: 1.500 mm Travel Z: 1,200 mm Ledpfx Ajr Ddu Dofujrt Remarks: Independent control panel 2 x CNC Fagor 8055 for the control of the 2 slides from the same screen. Grinding head (optional) Year of manufacture/reconstruction: 1975/2001

Condition: used, mileage: 144,000 km, power: 177 kW (240.65 HP), first registration: 11/2011, fuel type: diesel, overall weight: 13,500 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, all wheel drive, Special equipment: Ljdpfx Aozaxthjfuort Trailer brake 2 - line, trailer coupling: towing coupling, trailer coupling: G 145, trailer socket 24V / 15-pole, audio system: CD radio (Bluetooth), differential lock front axle, cab variant: S (short with extended rear wall), electric window lifts, heated windshield, graphic info display with eco-meter, air dryer 1 chamber, heated, engine PTO front with tandem pump, parameterizable special module, reversing warning system acoustic (warning signal outside), rear window, seats in cab: driver's seat comfort suspension seat, sun visor outside, stabilizer rear axle reinforced (for extremely high load), stabilizer front axle reinforced, steel rims 11.00x20.0. Additional equipment: Emission standard EURO 5, axle configuration: 4x4, exterior mirrors electrically adjustable and heated, battery 115 Ah, cockpit distributor, sunroof (steel), differential lock rear axle, cab: tilting mechanism hydraulic, cab: S (short), suspension: leaf / leaf, generator 80 A, transmission 6-speed - type: G 60-6, urea tank (AdBlue): 25 liters, rear axle H 4, crown wheel 410, hydraulic steering gear LS 6 / LS 8, interior filter: pollen filter, body / superstructure: tipper, fuel tank: 125 liters, model update Atego 2, engine 6.4 liters - 175 kW diesel (OM 906 LA), engine start / stop system, engine brake with constant throttle, auxiliary drive MB 2C, auxiliary drive MB 60-2C with MPA, wheelbase 3260 mm, SCR system (AdBlue technology), side impact protection, seats in cab: passenger single seat, fixed, drum brake front and rear axle, underrun protection rear fixed, transfer case - VG 550 - 3W, immobilizer, permissible total weight 13.50 t.