Used Tns for sale (144)

Condition: new, mileage: 273 km, power: 184 kW (250.17 HP), overall weight: 17,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle M.A.N. TG3 18-ton municipal 4x4 all-wheel drive special hooklift truck without registration, suitable for fire departments, technical relief organizations, emergency services, or disaster services. Payload: 9 tons, suitable for containers from 4.00 to 5.50 meters in length, all-wheel drive (4x4) with 3 differentials locks and 4.50 m wheelbase, single tires, high-clearance chassis, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer coupling, gross train weight 28 tons, 100 km/h top speed, and no torque limitation for full engine power! And much more. Supplied with one year MAN manufacturer’s warranty from the date of first registration. Equipment: - TN crew cab with double cabin and 3 seats - High-clearance chassis, extreme off-road capability - 4,500 mm wheelbase - Single tires - MAN engine D0836 LFLBN with 250 hp, no torque restriction - Euro 6 e - 4x4 drive - Differential locks on front and rear axles - Unladen weight 7,988 kg - Payload 9,012 kg at GVW 17,000 kg - Hiab XR 10 S hooklift system - Suitable for containers from 4.00 m to 5.50 m - Hydraulic rear underrun protection, extendable - Hydraulic internal locking system - Hooklift height 1.57 m - Hookloader control unit with cable extension - 2 additional frame-mounted skip supports - 2-stage control for extending and retracting - MAN G102 transfer case with road and off-road mode - Electronic transfer case lock management (VSM) - MAN PowerMatic 08.13 OD automatic transmission - PTO OPN0L Medium Duty ISO 21308 - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - MAN TipMatic Offroad driving program - MAN TipMatic Emergency driving program - Air conditioning - Additional water heater, 4 kW - Trailer coupling (Ringfeder RF40/G150B type) with air connections - Permissible gross train weight 28,000 kg Gtodpfx Abexdgmvsreu - Trailer load 16,500 kg - Two additional heavy-duty front towing eyes integrated into the bumper - Additional front compressed air connection - Leaf suspension on front and rear axles - Front axle: 9,000 kg, outboard planetary drive, selectable, with differential lock - Rear axle HP-1333, 13,000 kg, single tires on rear axle, with differential lock - Axle ratio: i=6.00 - Stabilizer for front and rear axles - Shock absorbers front and rear - Electronic braking system (EBS) - High-performance engine brake MAN EVBec - Roll-off protection MAN EasyStart - Drum brakes on front and rear axles - ASR, ESP, ABS - Emergency brake assistant (EBA) - Front Detection - Tire pressure monitoring system (TPM) with tire temperature display - Driver alertness warning system (MAN AttentionGuard) - Preparation for alcohol interlock - Cruise control - Multifunction steering wheel - 150-liter fuel tank - Roof hatch - LED daytime running lights - LED rear lights - Stone chip protection for front headlights - Electrically adjustable and heated exterior mirrors - Premium air-suspended driver’s seat package, Plus air-suspended passenger seat package - Air-suspended comfort driver’s seat with lumbar support and shoulder adjustment - Air-suspended comfort middle seat with integrated seat belt system, offset to the rear - Air-suspended comfort passenger seat New vehicle without registration, delivered with MAN manufacturer warranty. Net price plus 19% VAT. Attractive financing options available, upon request. All information provided without liability. Subject to errors and prior sale. Internal vehicle number: 2562-K

Condition: new, functionality: fully functional, power: 22 kW (29.91 HP), fuel type: electric, color: yellow, Year of construction: 2026, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm • Length: 2500 mm • Motor power: 22 kW • Bar number: 5-9 • Elliptical bar shape Gtjdsyhz Sgepfx Abreu • Aperture: 25-150 mm • Feeding size 50-1.500 mm • Chainy drive system • Max. Capacity 200-300 T / s • Capacities calculated according to the specified material density (1.6 tn/m3)

Condition: new, functionality: fully functional, power: 22 kW (29.91 HP), fuel type: electric, color: yellow, Year of construction: 2026, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm • Length: 2500 mm • Motor power: 22 kW • Bar number: 5-9 • Elliptical bar shape • Aperture: 25-150 mm • Feeding size 50-1.500 mm • Chainy drive system • Max. Capacity 200-300 T / s Gtjdsyhz Saepfx Abrou • Capacities calculated according to the specified material density (1.6 tn/m3)

Condition: used, HYDRAULIC DOUBLE COLUMN PRESS CAMP 250 tn Double column press Gtsdpfx Aegr Ur Rsbrju Pressing power 250 tn Stroke of the piston 500 mm Table size 570 x 570 mm Distance from table to piston 600 mm Distance between uprights 570 mm Approach speed 95 mm/seg Workin speed 7.5 mm/seg Retraction speed 135 mm/ seg Engine power 30 cv

Condition: excellent (used), Brand : CORREA Model : PRISMA-20 Type : CNC Cnc : HEINDENHAIN 530 Table dimensions : 2.000 x 900 mm Number of slot: 5 x 22 mm Distance between T slots: 200 mm Axis travels (X,Y,Z) : 2.000 x 1000 x 1000 mm Head type : Universal manual Taper : ISO 50 Speed range : 550 - 3.000 Spinale power : 22 kw Gtsdpfex Dzf Tjx Abreu Rapid traverse (X) : 12.000 mm/min Rapid traverse ( X) : 20.000 mm/min Maximum weight on table : 3.500 kg Machine weight : 14 tn Machine equipped with: Fairing Electronica hadwheel

Condition: excellent (used), Brand: CORREA Model: CF-22 PLUS Cnc: HEINDENHAIN 530 Table dimensions : 2.500 x 700 mm Number of slot: 5 Slot dimensions: 22 mm Axis travels (X,Y,Z) : 2.000 x 800 x 800 mm Head type : Universal manual Tool camping : Hydraulic Taper : ISO 50 (DIN 69871) Speed range : 4.000 rpm Spinale power : 22 kw Rapid feeds : 12.000 mm/min Maximum weight on table : 4.000 kg Machine dimensions : 6.605 x 3.315 x 2.730 mm Gsdpsxr A Ilefx Abretu Machine weight : 10 tn Machine equipped with : Fairing Chip conveyor Electronica hadwheel

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, throat depth: 350 mm, total height: 3,200 mm, table width: 1,100 mm, table length: 700 mm, stroke adjustment: 150 mm, total width: 1,860 mm, total length: 3,200 mm, overall weight: 8,000 kg, pressing force: 160 t, distance table to ram: 500 mm, year of last overhaul: 2025, Equipment: safety light barrier, GARNET C-FRAME ECCENTRIC PRESS MODEL: PE4-160 – SHOWROOM MACHINE DESCRIPTION: Frame constructed from welded and stabilized steel. The slide is made of welded steel, equipped with four guides and a base designed for oil collection. Transmission between the drive shaft and the eccentric shaft is via a gear reducer with ground gears; this system allows operation at high tonnage with relatively low nominal speeds. Electropneumatic clutch-brake, equipped with dual-channel safety solenoid valve and cross-flow. The pneumatic system includes a compensation tank, filter-regulator-lubricator unit with control pressure switch, and safety valve. Centralized automatic lubrication with a progressive lubrication system. Electric panel with programmable PLC (Omron or Pilz) and electrical components by Siemens or Schneider. Operation by two-hand push button control and low-voltage electric foot pedal. Safety provided by photoelectric barriers and side guards with safety micro-switches for opening. Emergency stops. All components comply with CE regulations. FEATURES: • Welded steel structure with reinforced sections. • Four anti-friction sliding guides. • DIN-650 T-slots for tool clamping. • Dual operation: two-hand and foot pedal. • Piece counter system. • Programmable PLC. • Hydraulic overload release system for slide unlocking. • Two-cam rotary limiter. MODEL PE4 – 160 Nominal capacity tn 160 Strokes per minute 45 Nominal stroke height 6 mm Stroke adjustment 20-150 mm Godpfow S Huwox Abrjtu Max. closed die height 350 mm Table-slide opening 500 mm Slide adjustment 70 mm Table dimensions 700 x 1100 mm Slide dimensions 370 x 620 mm Table central bore diameter 280 mm Slide bore diameter 55 mm Throat depth 350 mm Main motor 11 kW Number of connecting rods 1 Number of guides 4 Safety light curtains yes Dual-body safety valve yes Pneumatic clutch yes Anti-vibration silent blocks yes Overall width (W1) 1800 mm Overall depth (D1) 1860 mm Height (H1) 3200 mm Approximate weight 8000 kg

Condition: like new (used), functionality: fully functional, total height: 3,500 mm, total width: 2,400 mm, total length: 1,000 mm, throat depth: 500 mm, pressing force: 300 t, table width: 1,000 mm, table length: 700 mm, operating speed: 14 mm/s, overall weight: 13,500 kg, reverse speed: 265 mm/s, working height: 1,100 mm, working range: 800 mm, pressure: 290 bar, Equipment: documentation/manual, safety light barrier, Power 300 TN Motor power 30 kW Gtodpfxowpf S Ds Abrou Throat depth 500 mm Working speed variable 14.9 to 9 mm/s Approach speed 178 mm/s Return speed 265 mm/s Maximum pressure 290 bar Stroke of piston 500 mm Lower table size 1,000 x 700 mm Upper table size 800 x 600 mm Max. vertical clearance 800 mm Working height 1,100 mm Total front 10,000 mm Total side approx. 2,400 mm Total height approx. 3,500 mm Weight approx. 13,500 kg.

Condition: like new (used), functionality: fully functional, machine/vehicle number: FDL-150-100E/NC, total length: 1,200 mm, pressing force: 150 t, table width: 800 mm, working height: 600 mm, clearance between the columns: 1,250 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR Gjdpfx Ajwpg Awebretu It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. • Useful lifting capacity of the table for moving 4 tons. • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 7,000 mm, total width: 4,750 mm, total length: 6,000 mm, pressing force: 1,000 t, reverse speed: 60 mm/s, The MV-1000E/NC-SINCRO hydraulic press is custom-designed for the adjustment of progressive dies. It features a tilting upper table and a movable lower table made of C45E steel, machined with DIN-650 T-slots to ensure minimal friction in the vertical movement of the upper table. This is achieved through the installation of maintenance-free bimetallic bushings and perfect parallelism ensured by four high-mechanical-resistance cylindrical columns of 300 mm in diameter, chrome-plated and rectified. STRUCTURE AND TABLES • Features a structure made from oxy-cut steel divided into three electro-welded monoblocks, exclusively manufactured from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Cylindrical columns with a diameter of 300 mm, high mechanical resistance, rectified, and chrome-plated to maintain a low friction and wear coefficient. • Upper table with T-slots and anti-fall safety system. • Useful table surface: 4,750 x 2,250 mm. • Structure designed to support 600 TN of concentrated force on 1/3 of its surface. • Lower table designed to support up to 50 TN in displacement, supported by bronze guides with graphite load and mechanical positioning centers for precise table positioning. CYLINDER AND HYDRAULIC GROUP • 6 single-acting cylinders with lapped sleeves, chrome-plated pistons, and anti-wear guides. • Four 50 TN hydraulic compensators located at the ends of the lower table. • 800-liter hydraulic group with a silent Denison pump, automatic disconnection of the fast approach pre-filling speed, and equipped with a decompression system in working speed. • Proportional pressure system and optical gauges for displacement control on the upper table, with a synchro-electronic system for compensating off-center or unbalanced forces. • Hydraulic group cooling system with an independent air-oil radiator unit. • All M series hydraulic presses include a lateral pressure switch to adjust the most suitable pressure setting for each type of work. Gtodpfx Aswpgwnebrju • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 12” touchscreen. Allows programming of semi-automatic and automatic operating modes, power, travel, and upper table dwell time. Capable of storing 300 recipes, with each recipe able to program all the above values. • Low voltage operation via two-hand pushbutton. • Anti-fall safety system with hydraulic safety jaws. • Level IV photoelectric barriers installed at the front and rear. • Lateral protections with opening and safety microswitches. TECHNICAL SPECIFICATIONS Power tn 125 - 1000 Opening Force tn 100 Powered Speeds 1 Engine Power kW 75 Fast Pre-Fill Speed mm/s 100 Variable Working Speed mm/s 12-4 Return Speed mm/s 60 Guide Diameter mm 300 Maximum Pressure Bar 290 Useful Table Area mm 4.750 x 2.200 Lower Table Displacement mm 2.200 Vertical Travel of Upper Table mm 800 Between Columns mm 5.000 x 1.490 Total Front mm 6.000 Total Side mm 4.750 Total Height mm 7.000 Weight kg 150.000

Condition: like new (used), functionality: fully functional, machine/vehicle number: MV-300E/NC, total height: 3,500 mm, total width: 1,800 mm, total length: 2,300 mm, pressing force: 300 t, table width: 1,250 mm, table length: 1,250 mm, overall weight: 18,000 kg, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The MV-300E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for deep drawing, punching, and deburring tasks. Power tn 300 Motor Power kW 18 Piston Stroke mm 750 Approach Speed mm/s 110 Variable Working Speed mm/s 5-15 Return Speed mm/s 130 Guide Diameter mm 150 Maximum Pressure Bar 320 Table Usable Area mm 1.250 x 1.250 Between Columns mm 1.250 x 940 Vertical Clearance mm 1.000 Total Frontal mm 2.300 Total Lateral mm 1.800 Total Height mm 3.500 Weight kg 18.000 Godewphhnjpfx Abrjtu STRUCTURE AND TABLES Consists of three electrowelded blocks made exclusively of S355JR steel. Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. The bottom table has a 50 Tn hydraulic cushion with a useful surface of 950 x 750 mm and three front consoles to support the die outside the press.Incorporates a SIEMENS KP-700 COMFORT NC for the regulation of the top table stroke, speed changes, and cushion regulation. CYLINDER AND HYDRAULIC GROUP 2 single-acting cylinders with lapped sleeves, chromed pistons, and maintenance-free anti-wear guides. 2 auxiliary double-acting cylinders for fast approach and return speeds. Variable speed motorized hydraulic group. Includes cylinder decompression valve. Silent hydraulic pump. All hydraulic presses of the M series include a pressure switch located on the side, allowing the most suitable pressure setting for each type of work to be regulated. Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY Incorporates a Siemens SIMATIC S7 1200 safety PLC and a 7” KTP-700 COMFORT touch screen located on the electrical panel. Allows programming of semi-automatic and automatic modes, power, stroke, and dwell time of the top cylinder and cushion. It has a storage capacity of 300 recipes, each recipe can program all the above values. Prepared for Industry 4.0. The electrical panel includes a selector that allows choosing the type of work to be performed in manual, semi-automatic, or automatic mode and a selector to choose operation in fast or slow speed. Electrical and hydraulic maneuvers are redundant and self-controlled. They incorporate an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of correct operation and safety distance for photocells. Operation is carried out by low voltage electric pedal. For safety, they incorporate category IV photoelectric barriers located in the front working area, two fixed side guards, and a practicable guard with a magnetic disconnection detector located at the rear.

Condition: like new (used), functionality: fully functional, machine/vehicle number: MV-600E/NC, pressing force: 600 t, table width: 990 mm, table length: 890 mm, operating speed: 5 mm/s, overall weight: 23,000 kg, reverse speed: 18 mm/s, Equipment: documentation/manual, safety light barrier, The MV-600E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for stamping, deep drawing, punching, and deburring tasks. Power tn 600 Motor Power 40 HP a 440 Vca / 60hz Working Speed mm/s 5 Approach Speed mm/s 15 Return Speed mm/s 18 Piston Stroke mm 1.015 mm - (40”) Guide Diameter mm 200 Table Usable Area mm 990 x 890 x 130 (39” x 35” x 5”) Between Columns mm 990 x 370 Vertical Clearance mm 1.625 - (64”) Working Height mm 990 - (39”) Lower Hydraulic Knockout Tn 80 Lower Knockout Stroke mm 406.4 - (16”) Upper Hydraulic Knockout Tn 80 Upper Knockout Stroke mm 406.4 - (16”) Total Frontal mm 1.850 Total Lateral mm 1.700 Total Height mm 4.500 Weight Kg. 23.000 Kg. approx. Equipped with a top and bottom table made of C45E steel, machined with DIN-650 slots, and a removable upper counter-table of 990 x 890 x 130 mm for die holders with “T” slots. We ensure minimal friction in the vertical movement of the top table through the installation of maintenance-free bimetallic bushings, with perfect parallelism achieved by four chromed and ground cylindrical columns. It uses an optimized hydraulic system with a pressure of 320 Bar, ensuring prolonged durability and reliability in its performance. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of three electrowelded blocks made exclusively of S355JR steel. Gsdpfx Aewpggiobretu • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Incorporates a SIEMENS SIMATIC S7 1200 PLC and a 7” HMI KTP-700 touch panel. This allows programming of the power, cylinder stroke, and speeds, with a storage capacity of 300 memories for different work cycles. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chromed piston, and maintenance-free anti-wear guides. • Motorized hydraulic group with two speeds and automatic disconnection of fast speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A pressure switch located on the side allows the most appropriate pressure setting for each type of work. • Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel incorporates a selector to choose manual, semi-automatic, or automatic operation modes, and another selector for fast or slow speed operation. • Equipped with a PLC to internally assist with maneuvers and decompression time. • Operation is carried out using a low-voltage electric two-hand button panel. • Electrical and hydraulic maneuvers are redundant and self-controlled, incorporating an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of proper operation and safety distance for photocells. • For safety, category IV photoelectric barriers are incorporated in the front work area, two fixed side protections, and a movable protection with a magnetic disconnection detector at the rear. • Machine equipped with an IXON system for online communication in case of faults or reprogramming. • Ladder with upper walkway for repair access (scaffold).

Condition: like new (used), functionality: fully functional, total height: 3,250 mm, total width: 3,650 mm, total length: 6,000 mm, pressing force: 400 t, table width: 2,520 mm, table length: 6,000 mm, operating speed: 3 mm/s, overall weight: 28,500 kg, reverse speed: 18 mm/s, pressure: 319 bar, power: 11 kW (14.96 HP), The TL-400-6000E hydraulic press belongs to the T/NC series and is custom-designed for straightening large welded structures and oxy-cut plates. Gtedpewpgmvefx Abrju Like all the hydraulic presses in the T/NC series, its design facilitates the loading and unloading of large pieces, plates, or structures. It allows access to different pressing points without the need to move the piece, thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge. Power tn 400 Engine Power kW 11 Working Speed mm/s 3 Approach Speed mm/s 10 Return Speed mm/s 18 Maximum Pressure Bar 319 Piston Stroke mm 450 Lower Table mm 6.000 x 2.520 Front Clearance mm 2.560 Vertical Clearance mm 700 Head Displacement mm 1.900 Bridge Displacement mm 4.900 Working Height mm 800 Total Front mm 6.000 Total Side mm 3.650 Total Height mm 3.250 Weight mm 28.500 STRUCTURE AND TABLES • Features an electrowelded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Longitudinal bridge movement is achieved using a frequency inverter and toothed belt. • Lateral movement of the head is motorized and controlled via a frequency converter. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides. • Equipped with a removable and interchangeable pad to prevent wear on the piston and machined at the end to adapt to tooling. • Includes a standard anti-rotation device for the cylinder and a calibrated front with end-of-stroke switches to adjust the cylinder's travel. • Motorized hydraulic group with two speeds and automatic deactivation of high speed. • Includes a cylinder decompression valve. • Pressure regulator. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel includes a selector that allows choosing between manual or semi-automatic operation. • Also includes a selector for choosing high-speed approach or low-speed working. • Operation is carried out via a suspended control station with emergency stop and low-voltage operation. • Includes a maneuver confirmation button. • Includes a perimeter-mounted safety rope device.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,085 mm, total width: 1,290 mm, total length: 1,160 mm, pressing force: 50 t, table width: 700 mm, table length: 450 mm, overall weight: 1,750 kg, working height: 850 mm, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The motorized hydraulic C-frame presses of the CM/NC series have four different powers ranging from 50 to 150 tons. Specially designed for stamping, die cutting, and forming work. The latest generation CM/NC series hydraulic presses have evolved into a versatility of uses, such as the possibility of incorporating these machines into automatic production lines. Model CM-50/NC Power 50 tn Motor power 5,5 kW Throat depth 265 mm Working speed 9,9 mm/s Approach speed 45 mm/s Return speed 60 mm/s Maximum pressure 320 bar Piston stroke 250 mm Lower table 700×450 mm Upper table 550×300 mm Maximum vertical light 400 mm Working height 850 mm Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg Gtedpfx Aowphvrsbrsu

Condition: used, Year of construction: 2023, New demonstration machine! List price: €86,567 net Base machine complete in standard configuration for drilling and grooving: For detailed technical data, please refer to the ProTec Type 0571 data sheet. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed modemax. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holders HSK63F with collet chuck 462E/OZ25, cutter length up to 130 mm. Information: Machining unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Network TN or TT Pneumatic connection 7 bar (102 psi). At the machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory-supplied. For the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, inner hose diameter 12 mm (min.). Compressed air consumption continuous operating air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection 3x extraction outlets dia. 80 mm. Extraction air velocity 30 m/sec - measured at the extraction outlet. Extraction requirement min. approx. 2500 m3/h. Machine weight approx. 1650 kg (with options!). Machine installation area: In general, a ProTec fix can be bolted to the floor. A concrete floor (or foundation) is required (at least at the four machine corners/feet). Equipment: Protec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm. Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device with lamella curtain. Prerequisite for horizontal routing for Lamello P-System (without Lamello P-System tools). Drill bit set for Protec shank ø 10 mm with clamping surface (JSO) 1 HW-roof tip drill bit 5x70mm (NL 35mm), LH # 30566-5-05035-L 3 HW-dowel drill bits 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW-dowel drill bits 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW-dowel drill bits 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW-dowel drill bits 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW-dowel drill bits 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW-cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW-cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW-cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R 1 HW-grooving cutter ø 125/30 mm groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and subject to agreement Tool holder HSK63 F 3.00 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm 3.00 pcs Indexable insert shank cutter Z1+1 1.00 pc HW with indexable insert drill tip ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert drill tip, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separat Gtsdpfow Tfzfsx Abrju

Condition: used, mileage: 138,023 km, power: 316 kW (429.64 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space volume: 46 m³, loading space length: 7,380 mm, loading space width: 2,490 mm, loading space height: 2,530 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, Tail lift Bär 1,500 kg, 1,800 mm. * Refrigeration unit Thermo King T-1000 R, diesel + 380 V, temperature recorder. * Full service history ----Deep-freeze box body Lamberet. ATP/FRC certified. ----* 12-speed automatic transmission * Box body with rear doors and tail lift * MAN EasyStart (hill-hold assist) * MAN EVBec (electronically controlled exhaust valve brake) * Front axle air suspension * Rear axle differential lock * Traction control system (ASR) * Rear axle air suspension * Anti-lock braking system (ABS) * Emergency braking assistant (EBA) * Two-line trailer brake system (EC) * Retarder * Electronic stability program (ESP) * Disc brakes * Full brake assistant * Driver attention warning MAN AttentionGuard * Electrically operated sliding/lifting glass sunroof * Battery main switch * Lane departure warning (LDW) * External transparent sun visor * Electrically adjustable and heated exterior mirrors * Electric windows for driver and passenger doors * TN cab – the flexible cab (narrow, long, standard height) * Cab suspension air-sprung * Central locking with remote control * Immobilizer (transponder) * MAN TipMatic 12 28 OD transmission * Automatic climate control * Auxiliary hot water heating * 590-liter fuel tank * Fog lights * Euro 6 E engine version * Engine version with AdBlue * Aluminum cargo floor * Towing hitch (jaw/maul type) * Air-sprung driver’s seat * Cornering light * Lower bunk * Adaptive cruise control (ACC) with stop-and-go function * Load securing rails * Refrigerator drawer under the bed * EBS * No spare wheel Gedpfx Aex Dn R Nobrotu ----Sale to business customers only! No guarantee for the above information! Subject to prior sale! Our general terms and conditions exclusively apply! We are happy to provide you with a leasing or financing offer.

Condition: excellent (used), Bomar Type: Bandsaw CLS 420.420 Dimensions: 2654 x 2135 x 1870 LxWxH Power supply: 3x400V,50Hz;TN-C-S 4,5 kw, 16A Belt size: 4670x34x1.1 mm Cutting speed: 20-120 m/min Weight: 950 kg Gtodevb Dy Eepfx Abreu Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Gtodpfxsw Uifdj Abrou Complete system Including safety screen (CE-compliant, with electric interlock) Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Condition: ready for operation (used), Supfina 811-507.4 feed device NC consisting of: ZARN 2052 TN needle axial cylindrical roller bearing, 811-507:03-2 bearing plate, 811-507.2:01-2 guide sleeve, 811-507.2:02-2 roller screw drive, used, normal signs of use, 100% functional, scope of delivery as per photos Gtodpfxexah Sfs Abrsu

Condition: new, Tyrolit REI 103467 TN 34200609 dressing roller for Schaudt Mikrosa, unused in opened original packaging, 100% functional, scope of delivery as per photos Gtodsxaicxspfx Abrju

Condition: new, mileage: 273 km, power: 184 kW (250.17 HP), overall weight: 17,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle M.A.N. TG3 18t 4x4 all-wheel-drive special roll-off tipper without registration. Payload: 9 tonnes, suitable for container lengths from 4.0 meters to 5.50 meters, payload 9 t, Wheelbase: 4.50 m, all-wheel drive (4x4) with 3 differential locks, single tires, high chassis design, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer coupling, and much more. Includes 1 year MAN manufacturer warranty from the date of registration. Equipment: - TN double cab with 3 seats - High chassis design - Wheelbase: 4,500 mm - Single tires - Engine: MAN D0836 LFLBN, 250 hp - Euro 6 e - 4x4 drive - Differential locks on front and rear axle - Unladen weight: 7,988 kg - Payload: 9,012 kg at GVW 17,000 kg - Hiab XR 10 S roll-off tipper - Suitable for container lengths 4.00 m to 5.50 m - Hydraulically extendable underrun protection at rear - Hydraulic interior locking - Hook height: 1.57 m - Roll-off tipper control unit with cable extension - 2 additional chassis supports for tipper - 2-stage control for extension and retraction - Transfer case MAN G102 with road and off-road mode - Electronic transfer case lock management (VSM) - MAN PowerMatic 08.13 OD automatic transmission - PTO OPN0L medium duty ISO 21308 - MAN Idle Speed Driving transmission function - MAN TipMatic Efficiency drive program - MAN TipMatic Offroad drive program - MAN TipMatic Emergency drive program - Air conditioning - Additional water heater, 4 kW - Trailer coupling (AHK) Ringfeder type RF40/G150B with air supply connections - Permissible gross combination weight: 28,000 kg - Permissible trailer load: 16,500 kg - Front and rear axle with leaf springs - Front axle 9,000 kg planetary axle, engageable, with differential lock - Rear axle HP-1333, 13,000 kg, single tires on rear axle, with differential lock - Axle ratio: i=6.00 - Stabilizer for front and rear axle - Shock absorbers on front and rear axle - Electronic braking system (EBS) - High-performance engine brake MAN EVBec - Roll-back prevention system MAN EasyStart - Drum brakes on front and rear axle - ASR, ESP, ABS - Emergency brake assist (EBA) Godpsxdgllsfx Abrotu - Front Detection - Tire pressure monitoring system (TPM) with tire temperature display - Driver alertness system MAN AttentionGuard - Preparation for alcohol interlock - Cruise control - Multifunction steering wheel - 150-liter fuel tank - Roof hatch - LED daytime running lights - LED tail lights - Stone guard for front headlights - Electrically adjustable and heated exterior mirrors - Premium air-suspended driver's seat package, Plus air-suspended passenger seat package - Air-suspended comfort driver's seat with lumbar support and shoulder adjustment - Comfort center seat, air-suspended, with integrated belt system, rearward position - Comfort air-suspended passenger seat New vehicle without registration with MAN manufacturer warranty Net price plus 19% VAT. Attractive financing options available upon request. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2562-Z

Condition: used, mileage: 9,300 km, power: 346 kW (470.43 HP), first registration: 08/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,500 mm, total height: 3,350 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, As-new and excellently maintained M.A.N. TGS 18-ton flatbed truck with Palfinger PK 14.502 SH crane with 6 hydraulic extensions, offering a lateral outreach of approx. 17 meters and a vertical reach of approx. 20 meters, radio remote control, 5th and 6th control circuit, 6.20 m long flatbed, payload of 6.1 t, engine with 470 HP and 5.50 m wheelbase, with only 9,300 km, PTO, rear air suspension, retarder, air conditioning, auxiliary heater, MAN Opti_View digital mirror replacement system, and much more. Equipment: - Permissible gross weight: 20,500 kg - TGS TN long cab with sleeper bed and rear wall window - Wheelbase: 5,500 mm - Euro 6 e engine - 4x2 drive - Curb weight: 11,860 kg - Payload: 6,140 kg at 18,000 kg permissible gross weight - Payload: 8,640 kg at 20,500 kg permissible gross weight - New aluminum flatbed with split drop sides and 4-way sliding access steps - Flatbed dimensions approx. length 6.20 m x width 2.48 m x height 60 cm - Palfinger PK 14.502-SH folding crane, mounted behind cab - Crane was inspected at a Palfinger workshop - Crane UVV inspection new until October 2025 - Max. lifting moment: 13.8 mt - Only 610 operating hours according to hour meter - PAL com P7 radio remote control - Engine start/stop with RPM incr. - Crane with 6 hydraulic extensions - Slewing and grab control - 10.5 kW oil cooler - Crane outreach up to 16.80 meters - Lifting capacity at approx.: 4.20 m / 2,950 kg | 6.20 m / 1,840 kg | 8.20 m / 1,300 kg | 10.30 m / 970 kg | 12.50 m / 780 kg | 14.60 m / 660 kg | 16.80 m / 530 kg - 2-way hydraulic stabilizers with swinging supports - Transport position monitoring - HPSC additional ballast function - Crane UVV inspection newly passed - PTO, gearbox-dependent, type NH/4c, without flange, f=0.97, at approx. 3:30 position - Rear axle differential lock - MAN TipMatic 12.26 DD gearbox - MAN retarder with MAN EVBec, multi-stage - MAN Idle Speed Driving gearbox function - Gearbox rocking function - Air conditioning, Climatronic - Additional water heater, 4 kW - Ringfeder 400 G 150A coupling with air connections - Permissible gross combination weight: 44,000 kg - Trailer load: 26,470 kg - Front axle leaf, rear axle air suspension - Front axle: 9,200 kg, Rear axle: 13,000 kg - Final drive ratio: i=2.85 - Front and rear axle stabilizer - MAN EasyStart hill hold - Full brake assist - Emergency brake assist EBA - EBS, ABS, ASR, ESP - Lane Departure Warning LDW - MAN Attention Guard - Reversing warning - Cruise control - Sun visor - Multifunction steering wheel - MAN EasyControl panel, 4 functions operable from outside with open door - Electric glass sunroof - Electrically adjustable and heated exterior mirrors - Electric windows - MAN SmartSelect infotainment with touchpad and direct access buttons - MAN Mediasystem Professional Navigation 12.3" - MAN sound system - Digital side mirrors - Driver comfort seat with air suspension, lumbar support, shoulder adjustment, and heating - Comfort-quality seat covers - 2 air horns on roof - 2 beacon pre-installations - Like-new condition Gtedpex Al Txefx Abreu Net price plus 19% VAT. Attractive financing offers on request. All information provided without guarantee. Subject to errors and prior sale. Internal vehicle number: 2475

Condition: used, mileage: 472 km, power: 375 kW (509.86 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGS 33.510 BB 6x4 CH chassis truck with first registration in 05/2025, 33 ton variant, 6x4 drive, wheelbase 3.30 m, 510 hp, with PTO, air conditioning, refrigerator, trailer coupling, gross train weight 59 tons, with manufacturer’s warranty, and much more. MAN ATS warranty valid until 25.09.2026 Rated payload: 33 tons Permissible gross vehicle weight: 26,000 kg Permissible total vertical load (technical, plus): 28,000 kg Medium-high design TN long cab with single sleeper bunk and rear window Diesel engine with 375 kW (510 hp) and 2,600 Nm torque 6 x 4 drive Wheelbase: 3,300 mm, rear frame overhang: 800 mm Differential locks on rear axles MAN TipMatic 12.28 OD gearbox Transmission PTO, gearbox-dependent, type NH/4c, without flange, ratio f=1.14, position approx. 2:30 High-performance engine brake MAN EVBec, adjustable MAN EfficientRoll transmission function MAN Rocking mode (creep mode) Transmission for increased thrust during driving operations MAN Idle Speed Driving transmission functionality MAN TipMatic Performance and Efficiency drive programs, up to 70,000 kg MAN TipMatic Offroad drive program, up to 70,000 kg MAN TipMatic Manoeuvre program for low-speed maneuvering MAN EasyStart hill start assist Full brake assist ABS, EBS, ASR, ESP Front and rear axles leaf sprung Front axle: 9,500 kg; rear axle: 13,000 kg Stabilizer on front and rear axles Axle ratio i=3.63 ROCKINGER type 400 G 150A drawbar coupling with air connections for trailer load up to 40,000 kg (technical plus) 59,000 kg permissible gross train weight (technical plus) Automatic climate control (Climatronic) Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind driver's cab roof 2 LED roof beacons on driver's cab LED tail and daytime running lights 2 LED contour and side indicators Preparation for reversing camera Extendable refrigerator in cab Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operating panel, 2 functions, operable from outside with door open Air-suspended and heated driver comfort seat with lumbar support and shoulder adjustment Comfort seat covers Smartphone integration MAN SoundSystem MAN Media System Advanced Navigation, 7-inch New vehicle with manufacturer’s warranty Gsdpjx Txxxjfx Abrotu Price NET excluding 19% VAT. We are happy to offer you attractive financing options. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2509

Condition: used, mileage: 273 km, power: 184 kW (250.17 HP), first registration: 12/2025, overall weight: 17,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle: M.A.N. TG3 18t 4x4 all-wheel drive special roll-off tipper without registration. Payload: 9 tons, container lengths from 4.0 meters to 5.50 meters, payload 9 t, wheelbase 4.50 m, all-wheel drive (4x4) with 3 differential locks, single tires, high chassis design, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer coupling, and more. Supplied with 1-year MAN manufacturer's warranty from the date of registration. Equipment: - TN double cab with 3 seats - High chassis design - Wheelbase 4,500 mm - Single tires Gtedpoxdglrefx Abreu - MAN D0836 LFLBN engine with 250 hp - Euro 6e - 4x4 drivetrain - Differential locks on front and rear axles - Unladen weight: 7,988 kg - Payload: 9,012 kg at GVW 17,000 kg - Roll-off tipper Hiab XR 10 S - Container lengths: 4.00 m to 5.50 m - Hydraulically extendable rear underrun protection - Hydraulic interior locking - Hook height: 1.57 m - Roll-off tipper control unit with cable extension - 2 additional frame tipper supports - 2-stage control for loading/unloading - MAN G102 transfer case with road and off-road modes - Electronic transfer case lock management (VSM) - MAN PowerMatic 08.13 OD automatic transmission - PTO OPN0L medium duty ISO 21308 - MAN Idle Speed Driving gearbox function - MAN TipMatic Efficiency driving program - MAN TipMatic Offroad driving program - MAN TipMatic Emergency driving program - Air conditioning - 4 kW water auxiliary heater - Trailer coupling Maul Ringfeder type RF40/G150B with air brake connections - Permissible gross train weight: 28,000 kg - Towing capacity: 16,500 kg - Front and rear axles leaf-sprung - Front axle: 9,000 kg, outboard planetary drive, selectable, with differential lock - Rear axle HP-1333, 13,000 kg, single tires, with differential lock - Axle ratio: i=6.00 - Stabilizer for front and rear axle - Shock absorbers on front and rear axle - Electronic braking system (EBS) - High-performance engine brake MAN EVBec - Creep start system MAN EasyStart - Drum brakes on front and rear axles - ASR, ESP, ABS - Emergency brake assist (EBA) - Front Detection - Tire pressure monitoring system (TPM) with tire temperature display - Driver attention warning system MAN AttentionGuard - Alcohol interlock preparation - Cruise control - Multifunction steering wheel - 150-liter fuel tank - Roof hatch - LED daytime running lights - LED rear lights - Stone guard for front headlamps - Electrically adjustable and heated exterior mirrors - Premium air-suspended driver’s seat package, Plus co-driver’s seat package - Air-suspended comfort driver’s seat with lumbar support and shoulder adjustment - Air-suspended comfort center seat with integrated belt system, offset to the rear - Air-suspended comfort co-driver’s seat New vehicle without registration with MAN manufacturer’s warranty. Net price plus 19% VAT. We are happy to offer attractive financing options. All information is without guarantee. Errors and prior sale reserved. Internal vehicle number: 2562-Z

Condition: new, mileage: 273 km, power: 184 kW (250.17 HP), overall weight: 17,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle M.A.N. TG3 18t municipal 4x4 all-wheel drive special roll-off tipper, not registered, ideal for fire departments, technical relief organizations, emergency services, and disaster response. Payload: 9 tons. Container lengths: 4.00m to 5.50m. All-wheel drive (4x4) with 3 differential locks and 4.5m wheelbase. Single tires, high chassis, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer coupling, Gross Train Weight (GTW) 28 tons, max speed 100 km/h, no torque limiter—full engine power available! And much more. Includes 1-year MAN manufacturer's warranty from date of registration. Equipment: - TN double cab with 3 seats - High chassis, extremely off-road capable - Wheelbase: 4,500 mm - Single tires - MAN D0836 LFLBN engine, 250 HP, no torque limitation - Euro 6e emission standard - 4x4 drive - Differential locks on front and rear axles - Unladen weight: 7,988 kg - Payload: 9,012 kg at GVW 17,000 kg - Hiab XR 10 S roll-off tipper - Container lengths from 4.00 m to 5.50 m - Hydraulically extendable rear underrun protection - Hydraulic internal locking - Hook height: 1.57 m - Roll-off system control unit with cable extension - 2 additional frame supports for tipper - 2-stage operation for loading and unloading - Transfer case MAN G102 with on-road and off-road ranges - Electronic transfer case lock management (VSM) - MAN PowerMatic 08.13 OD automatic gearbox - PTO OPN0L Medium Duty ISO 21308 - MAN Idle Speed Driving transmission function - MAN TipMatic Efficiency, Offroad, and Emergency drive modes - Air conditioning - 4 kW water auxiliary heater - Trailer coupling Ringfeder RF40/G150B with pneumatic connections - Permitted gross combination weight: 28,000 kg - Towing capacity: 16,500 kg - 2 heavy-duty front towing eyes integrated into the bumper - Additional front compressed air connection - Leaf spring front and rear axles - Front axle: 9,000 kg driven outer planetary axle, switchable, with differential lock - Rear axle: HP-1333, 13,000 kg, single tires, with differential lock - Axle ratio i=6.00 - Stabilizer bars for front and rear axles - Shock absorbers front and rear - Electronic brake system (EBS) - High-performance engine brake MAN EVBec - Roll-away prevention MAN EasyStart - Drum brakes on front and rear axles - ASR, ESP, ABS - Emergency brake assist (EBA) - Front Detection - Tire pressure monitoring system (TPMS) with tire temperature display - Driver attention warning (MAN AttentionGuard) - Alcohol interlock preparation - Cruise control - Multifunction steering wheel - 150-liter fuel tank - Roof hatch - LED daytime running lights - LED tail lights - Stone guard for front headlights - Electrically adjustable and heated exterior mirrors - Premium air-suspended driver seat package, Plus co-driver seat package - Air suspended comfort driver’s seat with lumbar support and shoulder adjustment - Air suspended comfort middle seat with integrated belt system, set back Gedpfoxdgmpjx Abretu - Air suspended comfort passenger seat New vehicle, not registered, with MAN manufacturer warranty. Price NET plus 19% VAT. Attractive financing offers available on request. All information is provided without guarantee. Errors and interim sales reserved. Internal vehicle number: 2562-K