Used Table Lathe for sale (21,781)

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Dsdpetk Ikmjfx Ahnjuu Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Dimension workbench approx. 2.940 x 800 x 985 mm (W x D x H) Dimension shelf approx. 1,730 x 320 x 985 mm (W x D x H) Included in delivery are: 03 x shelf upright S-1, completely galvanized total height 1.972 mm Depth up to height 985 mm: 800 mm Depth from height 985 mm: 320 mm 02x Shelf upright S-1, completely galvanized total height: 985 mm Depth: 800 mm 10 x plastic cover caps 10 x steel feet 33 x shelf beams, S - 2, 1.650mm clear width 10 x shelf beams, S - 1, 600mm clear width Dusdjhy Nl Ijpfx Ahnsu 28 x shelves, H 25, 300 x 800 mm 04 x shelves, H 25, 150 x 800 mm 06 x shelves, H 12, 600 x 320 mm 03 x shelves, H 12, 450 x 320 mm 14x open fronted storage boxes, new, dim. approx. 350 x 210 x 150 mm, blue 15x open fronted storage boxes, new, dim. approx. 500 x 315 x 200 mm, blue Remark: The trash can is not included in the offer! Our services at a glance: (Prices on request) assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data for the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: Dedjthfddjpfx Ahnsuu 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 3,200 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,980 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 08x Z-bracket, used for locking / inserting chipboard Surface galvanized Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 3,200 x 700 mm / 2 levels / (271.00€ incl. 19% VAT) Workbench 3.200 x 800 mm / 2 levels / (282,00€ incl. 19% VAT) Workbench 3.200 x 900 mm / 2 levels / (293,00€ incl. 19% VAT) Workbench 3,200 x 1,000 mm / 2 levels / (304.00€ incl. 19% VAT) Workbench 3,200 x 1,050 mm / 2 levels / (309.00€ incl. 19% VAT) Workbench 3.200 x 1.100 mm / 2 levels / (315,00€ incl. 19% VAT) Workbench 3,200 x 1,200 mm / 2 levels / (325.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. Duodpfxothi Huo Ahnsu You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 3,180 x 700 mm / 2 levels / (184.00€ incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (186.00€ incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (188.00€ incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (190.00€ incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (192.00€ incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (194.00€ incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (198.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 2,470 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x workbench stand, used Material color: anthracite Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( screwed framework ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm clear width: 2,300 mm 08x Locking pin, second-hand Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 2,470 x 700 mm / 2 levels / (166.00€ incl. 19% VAT) Dodpeth N Slefx Ahnsuu Workbench frame 2,470 x 800 mm / 2 levels / (168.00€ incl. 19% VAT) Workbench frame 2,470 x 900 mm / 2 levels / (170.00€ incl. 19% VAT) Workbench frame 2,470 x 1,000 mm / 2 levels / (172.00€ incl. 19% VAT) Workbench frame 2,470 x 1,050 mm / 2 levels / (174.00€ incl. 19% VAT) Workbench frame 2,470 x 1,100 mm / 2 levels / (176.00€ incl. 19% VAT) Workbench frame 2,470 x 1,200 mm / 2 levels / (178.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,300 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 3,000 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,300 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Djdjtk Irkspfx Ahnsuu Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Djdpfowgicbox Ahnjuu Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,900 mm 02x CS Sigma profile, used Dodpfx Ahstk Iwajnouu Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x workbench frame, new Material color: anthracite total width: approx. 1.750 mm total height: approx. 865 mm total depth: approx. 600 mm 01x Worktop, new total width: approx. 1.750 mm material thickness: approx. 35 mm total depth: approx. 600 mm Notes: - The workbenches are commissioned unassembled Dedoh Euk Uopfx Ahnsuu General Item Information: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 800 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 800 mm surface: coated if necessary (if necessary in two parts) 01x Chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 800 mm surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. Dujdsi Ewqrspfx Ahnsu - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 1.000 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled Duodpfx Aoi Ewqyehnsu ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 1.000 mm Surface: coated if necessary (two-part if necessary) 01x Chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 1.000 mm Surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Depth of chipboard: approx. 850 mm Dedpfetk Iwpsx Ahnouu Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: adjustable from 750 - 1,250 mm Scope of delivery includes: 01x Workbench frame, new Frame color: grey Bench leg adjustment: 700-1,250 mm adjustable 01x Drawer cabinet, new Cabinet color: grey Door color: blue Lockable: yes Number of drawers: 3 pcs Duedov Tm Icepfx Ahnju Drawer height: 115 mm 01x Worktop, new Material: multiplex Material thickness: 38 mm Total width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for pick-up. Any additional transport or shipping of this item is subject to extra charges, which can be quoted separately by us depending on the delivery location and delivery scope.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm Duodpfsrtqm Djx Ahnsu 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm 06x self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, CNC Control: Fanuc Series 18i-T X-axis travel mm: 242 Y-axis travel mm: - Z-axis travel mm: 1,300 Capacity / swing mm: 570 Max. length mm: 1,280 Max. turning diameter: 350 Bar capacity mm: 90 Spindle speed rpm: 3,500 Spindle power kW: 22 Nose / taper: A2-8 Chuck / table: 10 inches Turret / tool changer: 12 stations / live tools Series: 30LM0121 Manufactured in: Korea Dedpfxozawvuj Ahnsuu EQUIPMENT: Powered tools Fixed tool holders Steady rest: Included Self-centering chuck: Included Electrical cabinet: Included Manuals

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm turning speeds: 12.000 / 12.000 U/min number of tools: 29 driven tools: ja / yes 19 control: FANUC 16 iT total power requirement: 9 kVA weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Dedpfx Ajvivygshnouu Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] *

Condition: new, Year of construction: 2025, operating hours: 40 h, functionality: fully functional, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 828D, workpiece length (max.): 550 mm, workpiece diameter (max.): 400 mm, total height: 1,900 mm, total length: 3,010 mm, total width: 2,500 mm, rotational speed (max.): 3,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 3,000 rpm, input voltage: 400 V, type of input current: AC, turning diameter: 400 mm, turning diameter over cross slide: 570 mm, bar passage: 87 mm, turning diameter over bed slide: 570 mm, turning length: 550 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, GEWA UT300 - Demonstration machine - Equipment: Control system: Siemens 828D Siemens drive components Centralized automatic lubrication system External enclosure Telescopic way cover Transformer Control cabinet Operator work area lighting Signal tower light LCD monitor Linear guides Servo tailstock Hydraulic chuck Sauter tool turret with 12 driven tools (BMT55) Renishaw tool measurement system Machine operating manual Pneumatic air gun Water gun Oil skimmer Duodpfsyr A U Tsx Ahnsu Chip conveyor and coolant tank This and other machines from GEWA Werkzeugmaschinen GmbH can be inspected at our facility in the Eifel region.

Condition: used, cutting height (max.): 145 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 3,600 rpm, rotational speed (min.): 2,800 rpm, total length: 2,000 mm, total width: 1,300 mm, total height: 1,500 mm, overall weight: 800 kg, No. 3276 Sliding table saw Kölle K 45 Used Sliding table length approx. 2000 mm Sliding table with swing arm and fence rail Max. cutting height 145 mm Max. saw blade diameter 400 mm Cutting width 1250 mm Speeds 2800 / 3600 rpm Manual saw blade tilting 0° - 45° Manual cutting height adjustment Table size 1180 x 1150 mm LW Adjustable upper saw blade guard Dedpezbu Evofx Ahneuu Transport dimensions approx. 2000 x 1300 x 1500 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, functionality: fully functional, Full Newman M3 Roller Frame Setup - Selling due to business closure 23 X 31 inch frames (60+ frames) - some are meshed, some are just the frames Newman Stretching Table (requires air - small compressor or link up to current air supply) Selection of mesh panels (approx 10) - or can be used with rolls of mesh of your choice 40n tension can be achieved £1,200 + VAT (ONO) Sold as seen, all in good working order Duedpfezb Rgpjx Ahneu Mid-Wales - UK Buyer responsible for collection or pallet delivery (2) can be arranged at buyers expense

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 110 kg, total length: 800 mm, total width: 3,500 mm, total height: 850 mm, TOP work table AT 3500 with beech wood top Stainless steel work table AT 3500 with beech wood work surface and back rail 3 x stainless steel flour trolleys, each with a capacity of 100 kg with a storage grid in the middle Drawer unit on the right Dimensions: 3500 x 800 x 850 mm (W x D x H) Used equipment Top has been newly sanded. Dusdpfx Ahjygcxusneu We have many more work tables in stock!

Condition: excellent (used), functionality: fully functional, total length: 800 mm, total width: 1,880 mm, total height: 930 mm, Mobile work table AT 1880 with stainless steel top Work table / baker’s table Stainless steel worktop with rear gallery Reinforced, welded construction Storage rack underneath Stainless steel version, mobile Dimensions approx.: 1880 x 800 x 930 mm, WxDxH Dsdpfxeygc U Ns Ahnjuu Top-quality used equipment We have other tables in stock!

Condition: used, Year of construction: 2016, REF: MM6451 1 x Edmolift UK Limited TL1000XB hydraulic scissor lift. Serial no. 119233. Date of manufacture – 2016. All equipment to be removed from the factory by the Buyer. Dodpfezcb Rzex Ahneuu

Condition: used, Year of construction: 2005, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 13.TS3.7, JUARISTI Drilling and Table Milling Machine Model: TS3-MG20 Year of manufacture: 2005 Machine overview: The JUARISTI TS3-MG20 is a powerful drilling and table milling machine with a sliding column T-design, designed for demanding applications in heavy-duty machining. The machine impresses with its robust construction made of high-quality GJL 300 cast iron. Steel flat guides in combination with INA-SCHAEFFLER RUS circular roller bearings offer maximum stiffness, highest stability and consistently high precision throughout the machine’s service life. The spindle head is arranged centrally in the column portal and features a combination of sliding guides and pre-tensioned linear guides for maximum stability and dynamics. Main features: • Spindle diameter: 130 mm • Max. speed: 3,000 min⁻¹ • Main drive power: 37 kW • Tool holder: ISO 50 DIN 69871 AD • Travel range Y-axis: 2,000 mm • Travel range W-axis: 800 mm • Travel range Z-axis: 1,800 mm • Travel range X-axis: 3,000 mm • Rotary table size: 1,600 x 2,000 mm • Max. workpiece weight: 18 t • CNC control: HEIDENHAIN iTNC 530 with HR 420 handwheel • Drive system: SIEMENS Digital Design and construction: Spindle head • Main spindle Ø 130 mm, nitrided and ground • Angular ball bearings • Oil-air lubrication of the spindle bearings • Separate oil circuit for cooling and thermal stabilization • Programmable spindle orientation • 2-stage mechanical gearbox • Hydraulic counterbalancing Guides and axes • Combination of sliding and roller guides with plastic coating (SKC) • Inductively hardened and ground guideways • Ball screw drives with double nut in all axes • Rotary table (B-axis) • Clamping surface: 1,600 x 2,000 mm • 9 T-slots (28H7) • Max. workpiece weight: 18 t • Rotation speed: up to 3 min⁻¹ • Drive via backlash-free double pinion Feed forces and speeds Feed forces • Y-axis: 20,000 N • W-axis: 20,000 N • Z-axis: 20,000 N • X-axis: 25,000 N • B-axis: 35,000 Nm Rapid traverse • Y-axis: 15 m/min • W-axis: 10 m/min Duodpfx Ahezaqinsnju • Z-axis: 15 m/min • X-axis: 15 m/min • B-axis: 3 min⁻¹ Working feed rates • Up to 5,000 mm/min (linear axes) Measuring systems • Resolution: 0.001 mm • Linear scales: HEIDENHAIN LS 186 C • Rotary encoder: HEIDENHAIN ROD 880 C CNC control • HEIDENHAIN iTNC 530 • Electronic handwheel HR 420 • Preparation for wireless measuring probe and Ethernet connection Standard equipment Electrical • Control cabinet with heat exchanger • Main switch and safety systems • Infinitely variable drives Hydraulics • Tool clamping/unclamping • Table clamping • Gear shifting Pneumatics • Cleaning of the spindle taper • Compressed air preparation Lubrication & cooling • Central lubrication system • Oil-air lubrication of the spindle • Thermally monitored oil cooler Optional equipment Coolant system • Internal and external • Tank volume: 1,000 liters • External: 40 l/min at 6 bar • Internal: 20 l/min at 15 bar • Paper band filter Tool changer • 60 tools • Max. tool length: 600 mm • Max. tool weight: 30 kg Other options • Spindle support bearing: 500mm • Manual universal swivel head • 2 extension swivel heads • Complete documentation Electrical connection data • Mains connection: 3 x 400 V • Compressed air: 6 bar Standards and conformity • CE conformity 2005

Condition: refurbished (used), Conventional parallel lathe MORANDO Mod. SR26 1300 X 7000 mm Completely reconditioned CE machine. New Turcite, new electrical/hydraulic part. Grinding. Accident prevention regulations with guards. Heavy series with a single cast iron casting. Guides like new. 4-jaw platform diameter mm 1700. Nr.02 Steady rests. Admissible weight between the centers without steady rests Kg 25,000 – 30,000. Admissible weight between the centers with steady rests and tailstock kg 38,000. Height of points: 1300 mm. Vaulting above the guides: 2615 mm. Vaulting above the carriage: 2240 mm. Bench width: 1500 mm. Distance between points: 7000 mm. Platform diameter: 1700 mm. Spindle motor: 50 – 80 Hp. Speed ranges: No. 24. Spindle speed range: 1 – 200 rpm. Dimensions: Length 11,800 mm. Height 3000 mm. Weight approx. 35,000 kg. Visible in operation. Dedpfx Ahjwbfw Donjuu

Condition: used, functionality: fully functional, spindle bore: 62 mm, turning diameter: 410 mm, center height: 205 mm, turning length: 1,500 mm, type of input current: three-phase, Parallel lathe Norwich Orion Mod. c 6241 / YZ 1500 Centre height: 205 mm Swing over bed: 410 mm Distance between centres: 1500 mm Bar passage: 62 mm Main motor power: 5.5 HP Steadies included Dusdpfey N T R Isx Ahnou