Used Thermal Oil Furnace for sale (12,826)

Condition: repair required (used), Thermal Binding Machine PLANAX COPY BINDER 2 Needs repair: Error code AC13. It is a mechanical fault. A motor continues to run (although it should stop) after the binding process. The heating circuit appears to be functioning correctly. Sheet capacity: 5 – 330 sheets Credpfx Asxuicueh Usi Format: Mainly up to DIN A4 (according to binding strip length) Machine dimensions approx.: 355 × 588 × 283 mm (D×W×H) Weight: approx. 21 kg Power supply: 230 V, 50 Hz, 400 W Warm-up/binding time: Previous model: Warm-up time approx. 6 min; Operating temperature approx. 143°C Materials & consumables: Uses Copy Strips – thermal binding strips made of 100% linen structure, available in various widths and colors. Manual unfortunately not available. Price negotiable. Offers are welcome.

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Cjdsxt Rmljpfx Ah Ujri

Condition: used, Storage location: Supplier Csdow N S Anjpfx Ah Ujri

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I Cedpfx Asd I T Exoh Uori For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Weishaupt RL70/1-A Burner Cjdpfx Ajxt U Exoh Usri Manufacturer: Max Weishaupt GmbH Model: RL70/1-A Type: Industrial oil burner (Monarch series) Version: ZM Year of manufacture: 1993 Serial number: 3966779 Fuel type: Light fuel oil (Heizöl EL) Compliance: DIN 51603 Performance range: 106 – 716 kg/h Certification: DIN certified (compliant with German industrial standards) The Weishaupt RL70/1-A is a high-performance oil burner designed for industrial boilers and large-scale heating systems. It ensures stable combustion, high energy efficiency, and reliable operation even under demanding industrial conditions. Burners from the Monarch series are renowned for their robust construction, durability, and easy access to service components. The RL70/1-A model is suitable for large heating installations, steam generators, and industrial furnaces.

Condition: used, ABC Electric Arc Furnace No.1 with Control Room Crodpfxexq A Dqs Ah Uji Capacity 30 Ton. With Hydraulic Room (Motors, Pumps, Tanks), Manual Hydraulic Control Station, Electrical Control Room, Heraeus Multilab Inspection Units, Cooling System & Stantioning.

Condition: excellent (used), Year of construction: 2001, JUN-AIR Compressor in soundproof housing Model 2000-25M Credpext D Eusfx Ah Uei Power (PS) 16.0 bar Continuously adjustable Volume 25 liters Air dryer integrated Very well maintained Only 204 operating hours in a clean environment. Dimensions (LxWxH) in mm: 450 x 660 x 860 Swivel casters with parking brake Noise level up to 52 dB, suitable for use in noise-sensitive environments.

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Cjdpsiryyaofx Ah Ujri Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 546228, volume flow: 1,600 m³/h, input voltage: 400 V, overall weight: 85 kg, type of input current: three-phase, noise level: 66 dB, extraction nozzle diameter: 250 mm, total height: 645 mm, total length: 985 mm, total width: 485 mm, power: 0.75 kW (1.02 HP), IF VARIO M 1600 – Mechanical Industrial Filter – Oil Mist Separation Manufacturer: IFS - Industriefilter - Service GmbH Suction plate with hose connection D = 250 mm, RAL 7035 Mechanical air filter for oil and emulsion mist Filter equipment: Pre-filter element: Aluminum wire mesh Exchangeable frame with pre-filter mat PPI30 Exchangeable frame with filter mat M5 (new) HEPA filter H13 (new) Airflow approx. 1100 m³/h Extraction capacity max. 800-1600 m³/h Incl. sound insulation Exhaust grille Siphon set 1" for liquid drainage, consisting of: 1-inch siphon 1-inch elbow I/A Csdpswbf I Ajfx Ah Ujri Hose clamp 2.5m oil return hose 1-inch 1-inch threaded connection with seal The filter system is mounted with vibration dampers on the head frame of the single-column base frame. Single-column base frame H=2200mm for Vario M 1600 oil mist separator Serviced by IFS and in good used condition. All technical details are subject to typing errors/mistakes. Price on request Sale exclusively within EU member countries.

Condition: used, Year of construction: 2001, MAPPI AU 1F 1S 900 1800 O.4 R.S.A. – year 2001 Tempering furnace Cjdpoxup Eijfx Ah Usri Max. glass dimensions: 900x2000 mm Thickness: 4-19 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON Credoxtf Dfjpfx Ah Uji HTF ProE – 2448-ADS-R 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Noise reduction cabin included 160 kW compressor for 3 mm glass included In good condition.

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Crjdpjxl Aauefx Ah Uei

Condition: used, functionality: fully functional, Mobile oil heater, suitable for heating construction sites, industrial halls or storage areas. Technical data: • Manufacturer: HEYLO GmbH • Type: HEYLO K100 • Rated output: 116 kW • For heating oil only, in compliance with EL DIN 51603 Csdpfx Ahsw Tauto Ueri • Condition: used, in good working order • Further details: see type plate Optional: matching 1000 L tank available.

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: Codec Rt D Nspfx Ah Ujri at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Connection: 400V, 1.5KW Crsdjxri T Uepfx Ah Uei Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code

Condition: used, Year of construction: 1993, machine/vehicle number: 5/4573, total width: 7,500 mm, total height: 11,400 mm, overall weight: 45 kg, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Csdpsqmmaljfx Ah Ueri Price on request.

Condition: good (used), Heraeus MR 170 E Muffle Furnace 1000 °C Manufacturer: Heraeus Type: MR 170 E Rated Temperature: 1000 °C Rated Voltage: 400 V, 50/60 Hz Weight: 45 kg Usable Space Dimensions: Width: 170 mm Height: 90 mm Crsdpfjxqy Utjx Ah Usi Depth: 250 mm External Dimensions: W x D x H 560 x 690 x 650 mm Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Credpjxnlwzsfx Ah Usi Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: excellent (used), Manufacturer / Type: Nabertherm L 08/14 with programmable C19 controller Configuration: horizontal Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower) Chamber volume: 8 liters Description: • Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm • External dimensions (W×H×D): approx. 61 × 140 × 71 cm • Weight: approx. 100 kg • Maximum power consumption: 3.3 kW • Plug: 380 V CEE (three-phase, 16 A) Scope of delivery: Furnace only, no additional accessories – see original photos Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational. Shipping: Freight forwarding or personal pickup Additional information: • Fast heat-up times (in test: approx. 30 minutes to 1000 °C) • Labotherm, Tmax 1400 °C Codpfxoxr S Rpe Ah Ujri • High-quality Al₂O₃ fiber insulation for rapid heating • Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life) • Heating from both sides • Low external casing temperature • Integrated control system with electronic safety interlock • Programmable control via C19 controller

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm Crjdpjhz D Iwefx Ah Usi 150-500 Degrees MARCELS MASCHINEN AG

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: Crodpfxexpuahj Ah Uei wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Condition: excellent (used), Standard steam boiler 2000 kg/h 22 Bar (2166) oil or gas burner Codpexqr E Dsfx Ah Ujri

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Temperature 1150° MARCELS MASCHINEN AG Csdpfxsvhazfe Ah Usri

Condition: excellent (used), Viessmann Vitoplex 105 kW low-temperature boiler (0025) for oil or gas Cjdpfsxqr Aiex Ah Uori

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° MARCELS MASCHINEN AG Crsdpfow Nnqujx Ah Uei