Used Thread Milling And Hobbing Machine for sale (69,547)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Milling machine Macmon M 434 NC Manufacturer: Macmon Type: 434 NC Control: Heidenhain TNC 128 Fpsdjztw Ehjpfx Al Ujn Year of manufacture: 2008 Condition: used X-axis: 400 mm Y-axis: 250 mm Z-axis: 400 mm Clamping surface 600 x 320 mm Main drive: AC motor kW 3 Speed range: Vertical infinitely variable 30 - 6300 Horizontal stepless 0 - 4200 - Feed rate 0 - 10 m/min Tool holder ISO 40 Operating voltage 400 / 50 Volt / Hz Control voltage 24V Weight 1200 kg Scope of delivery - Documentation - Machine feet - Coolant system - Spindle guard - Machine light - HR410 Handwheel - Horizontal spindle Counterholder

Condition: used, Year of construction: 2013, functionality: fully functional, KUNZMANN WF 600M Milling Machine (2013) Manufacturer: KUNZMANN Type: WF 600M Milling Machine Year of manufacture: 2013 Condition: Used X/Y/Z: 600/400/400 mm Spindle taper: SK 40 Milling table clamping area: 800 x 425 mm Clamping slots: 6 slots, width 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Fpodpfx Alozy Srce Ujn Feed rate: 0 – 2000 mm/min Rapid traverse X and Y: 5000 mm/min Rapid traverse Z: 4000 mm/min Hydraulic clamping system Main drive motor: 5.5 kW Weight: approx. 2000 kg - Dimensions: approx. 2 x 2 x 2 m

Condition: used, Year of construction: 2011, Control Heidenhain x-travel 600 mm y-travel 855 mm Fpodpfx Alsz Hz Nze Uen z-travel 750 mm tool taper HSK 63 number of tool places 40 Pos. Condition: Used Technical features & accessories: - KNOLL 500K-1/10 chip conveyor (right-hand side) - BÄR TFK140 belt filter - ARO belt filter Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 1978, Technical details: table surface area: 1970 x 400 mm distance between table/spindle: min./max. 150 / 250 mm rapid traverse: 1 / 2 m/min revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min milling spindle taper: DIN 2019 = Nr. 40 (SK40) axial adjustment: manuell = 150 mm quill feed: 0,012 / 0,025 / 0,05 mm/U feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min total power requirement: ca. 8,4 (10,5 kVA) kW machine weight approx.: 3000 kg dimension machine xH: 3,05 x 2,7 x 2,0 m wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Fedpfxou Ndhie Al Ujpn Further features: - distance spindle axis / lower edge counterholder: 55 mm - axial movement of the counter bearing sleeve 50 mm - milling carriage movement horizontal 1000 mm (automatic + manual by hand) and vertical 100 mm by hand + max. 5mm automatic/hydraulic Equipment: - chip container 470x300x300mm - 2x oil collecting basins (3200x1500x70 and 3200x800x60mm) - some accessories/tools *

Condition: good (used), Year of construction: 1976, max. wheel diameter 2300 mm gear width 1000 mm max. module 22 min. module 1 total power requirement 45 kW weight of the machine ca. 22 t Fpedozr Rpdepfx Al Uen dimensions of the machine ca. 5x3x4 m

Condition: used, machine/vehicle number: 51235/08, This universal milling machine with a lid, type: FP1, will be auctioned off online as part of our industrial auction / machine auction due to the closure of Trola GmbH – machines, workshop equipment, plastic parts, and material handling equipment. Fsdjz Ndblopfx Al Ujpn You can find this and many other items on our platform.

Condition: used, Year of construction: 2013, x-travel 762 mm y-travel 508 mm z-travel 508 mm b-axis ° c-axis 360 ° spindle tunring speed 12.000 U/min Fodez Nqavepfx Al Ujpn tool taper SK 40 number of tool places 40 Pos. Condition: Used Technical features & accessories: - Chip conveyor Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: used, Year of construction: 2013, Control Heidenhain x-travel 800 mm y-travel 650 mm z-travel 550 mm b-axis -5 / +110 ° c-axis 360 ° table dimensions 800 x 700 mm max. workpiece weight 600 kg spindle tunring speed 18.000 U/min Number of working hours ca. 71.618 h spindle hours ca. 33.508 h Condition: Used Includes ZERO CLAMP loading robot Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Fpsdpfxjz Hqkzs Al Ujn Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP4M Active Manufacturer: Deckel Type: FP4M Condition: used, good Digital readout: 3 - axis digital readout Heidenhain Travels: X - axis: approx. 500 mm Y - axis: approx. 400 mm Z - axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 - 2500 rpm Tool holder: ISO 40 Fpjdpfx Ajzgvmdjl Usn Hydraulic tool clamping Drive power: approx. 6.0 kW Feed rates & rapid feeds: in all 3 axes Feed range: approx. 8 - 630 mm/min Rapid traverse: approx. 3.0 m/min L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg Machine light Spindle guard Scope of delivery: - 10x tool holders - Allmatic high-pressure vice - documentation - Spindle guard

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Fpedpfxszx Nybe Al Uen Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components Fjdjw Uab Nspfx Al Uspn This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: used, BÄUERLE SFM spindle moulder - used - Fpjdswmctyjpfx Al Ujn Planed cast iron table, Finely adjustable milling stop, Right/left rotation ----- Technical specifications ----- Table size: 1100 x 920 mm, Work table height: 830 mm, Spindle diameter: 30 mm, Speeds: 2,800, 4,500, 5,600, 6,000, 9,000, and 12,000 rpm.

Condition: excellent (used), Huron SXB 523 CNC Bed Milling Machine Heidenhain CNC control Year 1991 Table 110" / 2794mm x 24" / 609 Fpedpfsz Hdvksx Al Usn 7,716lbs / 3499kgs max table load 78.7" / 1998mm X travel 59" / 1498mm Y travel 33.5" / 850mm Z travel 30-3000RPM spindle 30 ATC 3 Axis

Condition: used, Year of construction: 2008, Control HEIDENHAIN iTNC 530 x-travel 1.850 mm y-travel 1.400 mm z-travel 900 mm c-axis 360 ° b-axis -20 / +120 ° Condition: Used Technical features & accessories: - Cooling unit BURN RW12000-N15 - Chip conveyor BMF KFE63/50-275Z60 - Belt filtration system - Coolant system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale. Fpedoz N Hxzepfx Al Ujn

Condition: used, Year of construction: 1986, functionality: fully functional, Deckel Maho 800E, manufactured in 1986: - Table surface area: 600 x 1100 mm - Travel distance in the x-axis: 800 mm - Travel distance in the y-axis: 450 mm - Travel distance in the z-axis: 500 mm - Weight: approx. 4000 kg Fpjdpfx Aez I Iiqol Ujn

Condition: good (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (max.): 5,100 rpm, spindle speed (min.): 10 rpm, table width: 230 mm, table length: 1,245 mm, type of input current: three-phase, overall weight: 950 kg, input voltage: 380 V, Used turret milling machine Brand: Optimum Model: OPTIMILL MF 2V Year: 2018 Weight: 950 kg Swiveling head with Siemens variable speed drive. 3-axis dimension display. Type: Turret milling machine with swiveling head ±90° (left/right) and tilting ±45°. Spindle taper: ISO 40 (DIN 2080 / DIN 69871) Speeds: Continuous electronic variable speed drive (typically 10 to 5,100 RPM). Table surface: 1,245 x 230 mm Travel (X / Y / Z): 800 mm / 305 mm / 406 mm Motor power: 3.7 kW (Three-phase 380V) Fpodpoz Ducvsfx Al Ujn Automatic quill feeds: 3 Automatic motorization in X and Y axes with variable speed control and rapid traverse mode. Machine complies with CE regulations.

Condition: good (used), rotational speed (max.): 2,050 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, table length: 600 mm, table width: 210 mm, Used conventional milling machine Make: Metba Model: MB-1 Features a 3-axis dimension display. Table: 600x210mm Travel: - Longitudinal with motor / Manual table: 290mm / 300mm - Vertical manual with bellows / without bellows: 270mm / 320mm - Vertical motorized with bellows / without bellows: 260mm / 310mm - Cross travel of the headstock, manual: 180+120mm Automatic feeds: Fpjdpfez Dtw Ssx Al Uon - Vertical and longitudinal: 15 to 500 mm/min. - Slow feed: 7 mm/min. - Rapid traverse: 1200 mm/min. Speeds: 12 (From 45 to 2,050 rpm) Motor power: 5Hp (Three-phase 380V) Headstock type: Swivel / Universal (accepts arbor or vertical headstock). Common uses: Machining of small/medium-sized parts, prototyping, and maintenance or restoration work. Includes: - Vise with swivel - Collet chuck with various sets of collets - Various milling tools (See photographs of the material on the floor)

Condition: used, Year of construction: 1978, Technical details: Fsdsu Nc Rvopfx Al Uepn x-travel: 1200 mm y-travel: 500 mm z-travel: 650 mm w-axis: 90° rechts/links table-size: 1600x500 mm revolution per minute: 24 - 1600 / 12 step U/min tool taper: SK 50 distance spindle nose and table: min/max: 150/800 mm distance spindle center to column: min/max: 200/800 mm table surface area: 1200 x 520 mm total power requirement: ca. 25 kW weight of the machine ca.: 5600 kg dimension machine xH: 2,4 x 3,0 x 2,4 m dimensions electric cabinet LxWxH: 1,1 x 0,5 x 1,8 m Further technical specifications: - horizontal spindle: rpm 25 - 1200 with 12 level, taper SK50 - controlled via control panel - incl. coolant device - equipped with measuring system manufacturer Millvision *

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 Fedpfx Aljzb Evlo Uopn The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm Fodpfxoyrhb So Al Uopn • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Type: WF 4/3 Milling Machine Fjdpfozza Smex Al Ujpn Year of manufacture: 2009 Condition: used, from a training workshop, cleaned and operational, ready for demonstration Spindle hours: 2,542 hours X-axis travel: 400 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 - 4,500 rpm Feed rates: 0 - 2000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Motor power: 5.5 kW Weight: 1920 kg Space requirement: approximately 2000 x 2000 x 2100 mm Total power consumption: approximately 7 kVA Central lubrication system Coolant system CE compliant Scope of delivery: – Technical documentation – Full protection enclosure – LED machine light

Condition: used, x-travel 2000 mm y-travel 1500 mm z-axis 3000 mm spindle diameter 100 mm Fpjdpfx Ajzmitdsl Ujn table surface area 1.400 x 1.300 mm tool taper MK | dimensions 6,4 x 3,2 x 3,4 m weight of the machine ca. 11,0 t used table borer. - some tool holders - turntable with motor - coolant system - facing plate Ø 660

Condition: used, Year of construction: 1992, total height: 2,700 mm, total width: 3,000 mm, total length: 5,300 mm, Colour: White Empty weight: 11.000 kg Price: On request - Year: 1992 - Documentation available: No - CE certificate present: No - Serial number: 9220212 - Drive system: Conventional - Bed milling machine model: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 3200 - Y-axis travel [mm]: 1000 - Z-axis travel [mm]: 1000 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 3500 - Table width [mm]: 800 - Tool holder: ISO50 - Main spindle power [kW]: 15 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout - └ Type of digital readout: Sony 3-A Fpsdezwn Egspfx Al Uen - Transport dimensions: 5300mm x 3000mm x 2700mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, 1 unit of IXION BT 25 STPF drilling and milling machine with various accessories Color: as shown in the pictures, according to the images and upon inspection Fpodpfxjz I Nkcj Al Uen Condition: used Location of the goods: workshop Payment method: prepayment via bank transfer Shipping: Self-collection only from the location in Bischofswiesen

Condition: used, This universal engraving and copy milling machine, type GK21, is being auctioned off online as part of our industrial auction/machine auction due to the closure of Trola GmbH – including machines, workshop equipment, plastic parts, and material handling equipment. Fpedez Ndcpspfx Al Uon You can find this and many other items on our platform.