Used Tig Welding Machine for sale (85,805)

Condition: used, TIG Welding Machine MESSER GRIESHEIM Type Combitig GW 23 AC/DC The machine only operates with direct current welding and contact ignition Serial No. 445276 Year of manufacture: approx. 1990 Output: 230 Amps = 35% duty cycle 180 Amps = 60% duty cycle 140 Amps = 100% duty cycle Infinitely variable setting range Current type: DC Mains connection: 400 V, 50 Hz, 32 A plug - 2-stroke / 4-stroke welding mode - DC welding with contact ignition works - AC welding and high-frequency ignition do not work - 7 meter hose package with hand torch - Connection plug for remote potentiometer (foot pedal) – foot pedal not included Ijdpfx Aedzqa Ijhyjal - Air-cooled - Gas pressure regulator Required space (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg The welding test shows good results when welding stainless steel with DC; the HF ignition does not work, but the arc can be ignited via brief contact. When welding aluminum with AC, no arc is formed.

Condition: used, TIG welding machine Output: 220 Amp = 35% duty cycle (ED) 160 Amp = 60% duty cycle (ED) 130 Amp = 100% duty cycle (ED) Iasdpfx Ahow Htywsyjl Current type: AC and DC Mains connection: 400 V, 50 Hz, 32 Amp plug - infinitely variable power setting - high-frequency ignition - 2-stroke and 4-stroke operation - water cooled - 7.5 meter TIG torch package with hand torch - shielding gas pressure regulator Space requirement L x W x H: 900 x

Year of construction: 2003, condition: used, machine/vehicle number: 06H 127; Lg-Nr. 06565, Technical data: - water-cooled DC-AC equipment TIG TR 4, - water-cooled MIG-MAG equipment DV - IV - XT - E. Welding machine STH 400 - for welding of: Stainless steel , steel , aluminium , etc. - 16-fold welding program preselectable with: - - Preset: E-welding , TIG - welding AC / DC, MIG-MAG welding - Digital Volt + Ampere display - Welding current infinitely variable from 10 A / 15 V to 400 A / 34 A - max. welding current max. 400 A 60% ED - 315 A 100% ED - Power consumption 400 V / 43 A / 16 kVA - pulse device - Welding current increase and decrease adjustment - Backfire adjustment - Gas pre - post current adjustment - water-cooled WIG - hose package 8 running meters, light version - E.- welding cable + earth cable - water cooled MIG - MAG hose package Iasdpfx Ahjcinmbeyjl - Separate wire feeder case DV - IV - XT for MIG - MAG welding - 4 rolls - wire feeder - Intermediate welding set - wire feed case 4500 mm - pressure reducer - E. - welding cable + earth cable - Space requirement approx. W 550 x H 1650 x D 1100 mm - Weight approx. 350 kg

Year of construction: 2004, condition: excellent (used), Offered from an insolvency is a DC TIG welding machine Manufacturer Migatronic Model Pilot 2400 Year of manufacture 2004 Machine No. 04050694 Technical data: 380 volts Welding range 5-240Amps Ijdpfx Asfthy Rshyeal Welding power: 240Amps at 35% ED 170Amps at 100% ED 2/4 beat Pulse function HF ignition additional water cooling KG 2 No.25730509 220 Volt 8meter burner package with ground cable ---- without pressure reducer-- Dimensions in mm approx. 510x370x220

Condition: good (used), Year of construction: 2019, functionality: fully functional, total height: 215 mm, total width: 130 mm, total length: 360 mm, overall weight: 7 kg, warranty duration: 12 months, type of cooling: air, product height (max.): 10 mm, welding current at 60% duty cycle: 150 A, welding current at 100% duty cycle: 130 A, welding current (min.): 5 A, welding current (max.): 200 A, - Tested used device in very good condition directly from the manufacturer - - Several devices available - MicorTIG 200 DC ControlPro (Accu-ready) TIG-DC welding inverter with MicorBoost technology (including gas management, high-frequency ignition and electrode welding function). All-in technology for power grid, generator and battery - "3 steps and weld" operating concept - Simple one-button operation - Continuous current setting - Ampere-accurate digital display - With graphical user guidance in the OLED graphic display - Maximum customization thanks to detailed welding sequence control - Job memory for 10 welding tasks Current new price (02/2025): 2,277.00 € plus VAT Scope of delivery: System including removable power cable, carrying strap, gas hose and operating manual THE MicorTIG SERIES. THE POWER PACKAGES FOR MOBILE TIG WELDING. Whether for professional TIG welders or occasional welders: The welding machines in the MicorTIG series from Lorch are the ultimate TIG machines for assembly use, but also for the workshop - suitable for steel and stainless steel. Whether for production or repair, with or without a power socket on site: The MicorTIG series improves the work results of TIG welders around the world - and makes their everyday life easier. Quite literally: At just 6.8 kg, you can easily take your Lorch MicorTIG welding machine with you anywhere - including accessories in the assembly case. Small but powerful: With the patented MicorBoost technology, the welding machines in this series get 200 amps from any normal power socket. INTUITIVE OPERATION. Thanks to the ampere-accurate digital display and clearly structured user interface, intuitive and at the same time very precise operation is possible. Also optionally available: an operating concept using a graphic display. NON-CONTACT HF IGNITION. TIG ignition is contactless with high-voltage pulses at the push of a button. Since the tungsten electrode does not touch the workpiece, there are no inclusions in the seam and the electrode is protected. PULSING AND FAST PULSING UP TO 5 kHz. Iedpfxovxid Rj Ahyeal The integrated pulse and fast pulse function up to 5 kHz is particularly suitable for processing thin welding sheets. It enables outstanding melt pool control and perfect results even with difficult welding tasks. JOB MEMORY FOR UP TO 10 WELDING TASKS. With the job function, you can save the parameters of up to 10 welding tasks and call them up quickly when required. Recurring tasks are completed quickly and efficiently. PERFECT FOR ELECTRODE WELDING. Lorch's MicorTIG welding machines are suitable for every electrode type and offer a convenient preselection for CEL and standard electrodes. Even special electrodes are no problem. During welding, the arc force control takes effect and ensures arc stability and perfect material transfer. The anti-stick system prevents the electrode from sticking or burning out. WITH MicorBoost TECHNOLOGY – UP TO 200 A FROM THE SOCKET. The patented MicorBoost technology provides enormous voltage reserves and regulates the TIG arc in an extraordinarily stable, controllable and precise manner – even with fluctuating mains voltage. This allows you to weld with up to 200 amps from a regular socket.

Condition: ready for operation (used), Merkle W 420 AC/DC TIG Insquare welding machine Welding system Technical data see picture no. 2 You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Iaodpfeu Hg Aqsx Ahyol Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustment range: infinitely variable Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg Ijdpfx Ahedzqb Eeyeal The welding test shows very good results when welding stainless steel with direct current. Overall in good condition.

Condition: good (used), We are selling a TIG welding machine ESS TIGARC 300 Iaodpfxou Sr Upe Ahyel

Year of construction: 2017, condition: new, functionality: fully functional, 2 TIP TIG WIG 500i ACDC/HW 160i Extreme case version units, complete with hot wire power source, water cooling, wire feeder, and each with 1-1 TIP TIG DV Extreme case version remote control units. TIP TIG WIG 500i ACDC HW 160i Extreme case version intermediate cable package. TIP TIG remote control (TIP TIG manual DV and welding current control 5-500A) TIP TIG remote control cable 5m TIP TIG remote control storage box TIP TIG transport frame, Extreme case, complete TIP TIG ground cable 500A 10m TIP TIG cable package HW TW 18 SC 4m, Teflon core, orange TIP TIG spare parts box L large, HD / KD 18 SC, gas lens Jumbo TIP TIG adapter DIX KAB 70/95 (all unused) 2 TIP TIG handheld hot wire welding systems complete with wire feeder and each with 1-1 FRONIUS Magic Wave 5000 Job G/F as a water-cooled power source TIP TIG High Speed Edition Handheld HD/KD (hot wire/cooling wire) TIP TIG HD module TIP TIG connection cable 1.4 m TIP TIG intermediate hose package FRONIUS, 3 m TIP TIG hose package HD, interchangeable torch 18 HC, 7 m, orange Teflon core Isdjwa S Tiopfx Ahyjal TIP TIG spare parts box large, interchangeable torch 18 HC TIP TIG adapter DIX KAB 70/95 (all unused) 4 TIP TRIMMER combi 230V 50/60Hz (demonstration models) Total new price: €98,358.49 net Used price: €49,180.00 net

Condition: used, TIG welding machine, electric welder KESTRA type WIG 350 AC/DC E-welding machine Serial No. Year of manufacture approx. 1985 Output: 350 amps = 60% duty cycle Adjustment range: 3 stages and fine adjustment Current type: AC / DC Power connection: 400 V, 50 Hz, 32 A plug - 4-metre hose package with TIG torch - 2-stroke / 4-stroke welding function - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with DC Iaodpfxsdzql So Ahyjl and good results when welding aluminium with AC. The HF ignition does not work, the arc can be started via brief contact.

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer Ijdodzqacopfx Ahyoal - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: good (used), Messer Griesheim welding machine Unitig GW 300 with torch earth cable direct alternating current Ijdsugv S Sspfx Ahysal

Condition: used, TIG and Electric Welding Machine / Inverter ESAB Type LTN 160 TIG Welding Machine for TIG and Electrode Manufacturer No. 405-423-0479 Year of manufacture approx. 2010 TIG Output 160 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Electrode Output 140 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Power supply 230 Volts, 50 Hz, Schuko plug - Continuous power adjustment - 2-stroke and 4-stroke operation - Stick electrode operation - 12-meter TIG hose package with hand torch - Direct current only (DC) - HF ignition - Shielding gas pressure regulator - Mobile trolley with cylinder holder Space requirements L x W x H 800 x 690 x 1120 mm Iasdpsv Uragefx Ahyol Weight 60 kg Good condition

Condition: new, functionality: fully functional, As a machine dealer in Offenburg, we offer premium welding machines from Rehm. Many machines are immediately available from stock. We are also happy to advise you with regard to individual wishes and requirements. Give us a call. Technical data Model: 280 AC/DC Setting range TIG [A]: 3-280 Electrode (BOOSTER) [A]: 3-280 Duty cycle (ED) at Imax. (10 min.) TIG [%]: 100 Electrode (booster) [%]: 60 Welding current at 100 % duty cycle at 40°C TIG [A]: 280 Electrode (booster) [A]: 260 Fuse protection (slow) [A]: 16 Torch cooling: Water Protection class: IP 23 Iajdpfx Aew Eil Tjhyel Power factor [cos phi]: 0.96 Power consumption at Imax. [kVA]: 11.9 Mains voltage [V]: 3 x 400 Mains frequency [HZ]: 50 Control socket [pol.]: 12 Welding cable socket [mm]: 13 Weight [kg]: 27 Dimension [mm]: 520 x 360 x 460 Possible accessories: Hand burner earth cable Pressure reducer Available immediately. For collection by the customer. Forklift available. Shipping is also possible.

Year of construction: 2018, condition: ready for operation (used), 3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site inspection is possible. Iasdpfx Ahsxdda Teyol

Condition: good (used), Two Messer Griesheim UNITIG GW 450 TIG welding machines are for sale. Water cooling, proven thyristor transformer technology, simple operation, before gas supply - after gas, forced shutdown, ramp-down, crater filling, any material incl. weldable aluminum, HF ignition, stick electrode welding, 1-6mm, ammeter, change in aluminum penetration + points, rectangular sine in the AC Super Alu range. Iodou Sqi Sepfx Ahysal Weight: 420 kg The price is per welding machine.

Condition: used, functionality: fully functional, machine/vehicle number: 127814, protection type (IP code): IP23, Equipment: type plate available, The machine on offer is a used Rehm Invertig 260 AC/DC. The machine is in perfect technical condition and is fully functional. Unfortunately, there are signs of wear and tear visually. All switches and the digital display work and the machine welds perfectly. The Invertig 260 AC/DC is in our warehouse ready for welding. Test welding is possible at any time, but it is best to arrange an appointment with us beforehand. Iaodpfx Ahev H Afwjyol With the Invertig 260 AC/DC you can weld TIG and electrodes. The machine combines professional welding with the simplest operation. The welding parameters can be individually set using the digital display. 3 languages (German, English and French) are already stored on the machine. The Invertig 260 AC/DC from Rehm offers a welding current range of 5-260 A with a high duty cycle. The individual welding current ranges and duty cycles for TIG or electrode welding can be found on the type plate. Optimal seam formation thanks to selectable current rise time/current fall time, gas pre-flow and gas post-flow time and starting current/end crater current. Narrower seam surface thanks to direct current pulses up to 500 Hz. Automatic saving of the last device setting via the digital display The scope of delivery includes a used water-cooled 8m TIG torch TIGZONE CS310A.

Condition: used, functionality: fully functional, machine/vehicle number: 171941, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, protection type (IP code): IP23, welding current (min.): 5 A, welding current (max.): 260 A, The machine on offer is a used Rehm Transtig 260 DC. The machine is technically in perfect condition and is fully functional. Visually, there are slight signs of use. All switches and the digital display work and the machine welds perfectly. The Transtig 260 DC is ready for welding in our warehouse. Test welding is possible at any time, but it is best to make an appointment with us beforehand. Iaodjupih Hepfx Ahyel You can use the Transtig 260 DC for both TIG and electrode welding. The machine combines professional welding with extremely simple operation. The welding parameters can be set individually via the digital display. The Transtig 260 DC from Rehm offers a welding current range of 5-260 A with a high duty cycle. Please refer to the type plate for the individual welding current ranges and duty cycles for TIG or electrode welding. ATTENTION: The offer is for the machine only! Torches, earth cables, pressure reducers, etc. can be offered for an additional charge. It goes without saying that these are new items!

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Iajdpfx Aouxbx Djhysl

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg Iaedpfjxy Hqtox Ahyol

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. Isdemk S Sljpfx Ahyoal In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Iaodpfxsxfrv Es Ahyel Gas clean

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE Ijdpfewbixrox Ahysal A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Friction welding machine from MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315 - Rexroth hydraulics Iaodjv Uzf Eopfx Ahyjl - German user interface - CE Upon request, this machine can also be converted for many other welding tasks.

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Isdsxddamepfx Ahyoal