Used Tig Welding Machine for sale (66,504)

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Dedpfxjd N E Rvs Affocf Test welds with stick electrodes show excellent welding results.

Condition: used, Spot welding machine DALEX type SL 16 EA Machine No. 68611900-5 Year of manufacture: 1986 Rated power at 50% duty cycle: 16 kVA Maximum welding power: 50 kVA Throat depth: max. 500 mm Electrode force: max. 17 - 278 daN Electrode arm diameter: Ø 45 mm Electrode holder diameter: Ø 25 mm Arm spacing: 140 mm / 280 mm Power switch: 8 stages Control: 4 times with single and series spots Operating pressure: 1-6 bar Open circuit voltage: 1.8 to 3.6 volts Connected load: 37 kVA Electrical connection: 400 Volt, 50 Hz - Welding cycle initiated via electric foot switch - Welding time infinitely adjustable - Water-cooled Space required (L x W x H): 1100 x 600 x 1200 mm Weight: 200 kg Dedpfx Ajwwaz Noffscf Good condition

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. Dcsdpodz Sq Ejfx Affsf For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: MF13BB05 - 532, MF13BB05 - 539, type of input current: three-phase, input voltage: 380 V, film width: 700 mm, overall weight: 290 kg, input current: 6 A, heating capacity: 2.3 kW (3.13 HP), Equipment: documentation/manual, MODULAR 70 packaging machines are sealing machines designed for plastic, heat-shrinkable films as well as non-shrink films, offering a compact design and high performance. They can process single-layer films with thicknesses ranging from 15 to 50 microns, suitable for both technical and food-grade use. The machine can achieve up to 900 packs per hour. Both machines were in operation from 2012 to 2019 and have since been stored unused in a heated warehouse. Machines can be purchased individually. Djdpeyu Rvkjfx Affjcf

Condition: like new (used), Year of construction: 2021, – Year of manufacture 2021 (the machine has never been used) – Capacity 20 kVA – Pneumatic Dsdpfxeytr N No Affocf – Control TE101 – Cooling – Documentation – 400V

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Dodpfsx Ic T Ajx Affecf Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Weight: 77.5 kg All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial no. Year of manufacture approx. 1990 Comprising three water-cooled transformers with water-cooled rectifier block Technical data: Total rating at 50% duty cycle: 210 kVA (total output from 3 transformers) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 20.1 kA (total from 3 transformers) Primary connection: 380 volts, 50 Hz (three-phase) Details per each transformer: Rating at 50% duty cycle: 70 kVA (per transformer) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA (per transformer) Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on secondary side Dsdpfx Ajdzp Txeffscf - DC power output via contact surfaces 50x50mm with M20x1.5mm threaded holes - Temperature sensor on each rectifier element and on each transformer winding - Connection cable: 7-core, cross section 50 mm², length approx. 6 m Overall dimensions (WxHxD): 700 x 710 x 440 mm Total weight: 480 kg Good condition

Condition: excellent (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm - maximum welding length: 2600 mm - support arms Dcodpfx Aoyu R Eloffjf - PLC controller

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200020800, The tools on the machine are for Kommerling 76 PVC profiles. Djdpfxeyvibvj Affjcf

Condition: used, Year of construction: 2015, Type: LBS043 / 80 / 1.5 Coil joining machine. With Fronius Trans Tig 2200 Job G/F Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 mm. Used machine in working condition. Strip width: 15 – 80 mm. Strip thickness: 0.5 – 1.5 mm. Power: 400 V / 50 Hz. Dcodpfx Afelddxhefjf Shears on the right not included. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Condition: used, Year of construction: 2003, functionality: fully functional, PVC 4 corner welding and cleaning machine Hollinger-Rotox Dcedpfx Asyu H T Soffef Maximum frame size 3800 x 3800 mm The machine is functional and disassembled. Transport and installation of the machine are not included in the price.

Condition: refurbished (used), Year of construction: 2026, Power at 50%: 40kVA Short circuit-current: 26,2kA Electrode force: 65-390daN / single stroke Dcedjyrx Ddspfx Affef Throat depth: 250-550mm --- Weld control: MPS 10 (5-times, 8-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Year of construction: 2004, functionality: fully functional, RS125 Friction Welding Machine, max. upsetting force 190 tons, KUKA friction welding machine. Modernized by the manufacturer KUKA in 2016. This machine is currently being fully overhauled by us. Equipment: servo hydraulics, facing unit, new steady rest, 2/3-jaw chuck, 'positioned welding' possible, e.g., for drive shafts. The friction welding machine is currently in use in our production for manufacturing hydraulic piston rods, aluminum-brass connections, production of small and large thread taps, manufacture of pressure rollers, etc. You are welcome to inspect this machine. Dcjdpfxjq Aurvo Affef

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Dcsdeyhq A Rspfx Affsf Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: ready for operation (used), throat depth: 550 mm, Output: 25 kVA Dcodpfx Aoyk S Utjffef Design size: 550 mm

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, total height: 340 mm, total width: 280 mm, total length: 660 mm, ground cable length: 2,500 mm, overall weight: 31 kg, type of cooling: air, hose package length: 5,000 mm, electrical fuse: 32 A, protection type (IP code): IP23, welding current (min.): 100 A, welding current (max.): 1,000 A, Equipment: documentation/manual, type plate available, incl. welding torch A12 – gas length 5 m, with shielding gas stand PSS-2 and accessories for ARC 6 to 12 mm gas, protective hose for hose assembly Application: - Particularly suitable for thicker sheet metal from approx. 2 mm - Stud welding of welding nuts type HexNut M6 to M8 (special accessory required) - For welding on perforated and non-perforated sheets Features: - Microcontroller control - Function monitoring - Error code display Dcjdpfeyrtp Uex Affef - Lift-off test - Library function - Process flow control Safety: - Integrated mains filter - Optimal for construction sites with high mains voltage fluctuations - EMC tested - High voltage testing - Restart lockout - Thermal monitoring of the transformer - Thermally controlled fan - Galvanic isolation between control and welding cables - Maximum protection against external interference - Protection class IP 23

Condition: good (used), Messer Griesheim welding machine Unitig GW 300 with torch earth cable direct alternating current Djdpeugv S Sefx Affscf

Year of construction: 1995, condition: used, 1 used well preserved water cooled inert gas welder MIG-MAG Make: ARTEC Model: W 501 Year of manufacture: 1995 Technical data: Welding current range up to 500 A Weight approx. 250 kg Accessories / special features: - water cooling - separate wire feeder ARTEC DV-W1 with 4 rolls wire feeder - incl. hose package, pressure reducer and ground cable Further technical data see pictures! Dcedjb Nd E Repfx Affof Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: used, functionality: unexamined, No. 453 Ess TM 30-151MS-1/2 No. 7/0501 Tool EI 84, BI210770 No. 454 Grau ASM 30-60 1990 No. 7.040.90, EI 30-60, BI210790 No. 455 Ess TM 30-122 Tool EI 66 TM 30-122 /S1/2-2/N4, No. 82/0701, Control PLS 510/MS54/82/0702 No. 456 Grau ASM 60-120, 1988, No. 8.020.88 BI210810 No. 457 ESS TMR /IA/S4/30-84 EI 84 Rotating table No. 83, Control type PLS 53, No. 83, Tools EI 48, 54, 60, 66, 84, 66/84 Dcedpfx Afjyntu Aofjf No. 478 Waasner TKSM/H No. 5709 EI 66, Cooler and transformers missing No. 479 Waasner TKSM/H. No. 5519 EI 66, Cooler and transformers missing No. 480 Ess TM 30-151 MT-MS-40-4 No. 9/1105 9/1106 1979 MIG / MAG Tools EI 66, EI 78

Condition: excellent (used), Year of construction: 1999, Welding machine make DALEX Type:VARIO MIC 400L year 1999 Dsdpfsfgvvaox Affscf in very good condition, little used.

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN Dsdpfxsu Nv Eaj Affscf PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *

Year of construction: 2007, operating hours: 800 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 01277, Perfect machine, a tiltable head for out-of-square welds 0 - 90° Dcjdpjyq N D Ssfx Affsf

Condition: used, Automatic rebar mesh welding machine MCC001 The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Minimum step between longitudinal bars: 100mm Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Pneumatic indicators: Working medium: Compressed air Working pressure: 6 bar Djdpoymcpysfx Affecf Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 with TIG welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 18 – 63.5 mm Dedjymautspfx Affscf - Thickness : 0.5 – 3 mm - Length : 3 – 6 m - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min

Year of construction: 2016, condition: ready for operation (used), An industrial TIG welding power source Merkle in AC/DC version is available. Insulation class: S, Cooling: AF, Voltage: 400V, Power factor: 0.95. Documentation available. An on-site inspection is possible. Dcsdpfxoynatre Affef