Used Tool Room Lathe for sale (37,570)

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Power: 9850 Watts Hedpfxsvzb Nqj Ag Isi The device has: - vacuum pump vaccum - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Hodpfsx Emfkex Ag Ioi Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Hjdpex Hgmwefx Ag Iei Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Hjdpjyg Ea Usfx Ag Iei Price is for the entire unit.

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Because of CANCELLED PROJECT of the construction of a nuclear power plant, we are able to offer you.... Hedpfovldr Aex Ag Iji NEVER USED - complete metal forming / processing plant (about 80 machines) Please contact us for full machinery list and more photos. Thank you!

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir Hedpfxjyc Ig As Ag Ioi • Manufacturer's manual • Accessories as shown in the photos

Condition: excellent (used), Year of construction: 1996, operating hours: 73 h, Complete equipment for orbital welding and bevelling of pipes in all kinds of materials and all kinds of thicknesses in diameter from 20 to 170mm for sale. Manuals and part lists are included. In addition to welding equipment, a TRI-Tool 206B and a Wachs SDB 103/3 bevelling machine are included. They will efficiently make all kinds of joints like V, J or U bevels. The equipment can be delivered free of charge "to the door" anywhere in Europa and up to 1 week of training is included. All three included welding heads are of the same type (original Dimetrics FFIP heads- Full Function In Place) with both oscillation and AVC. (Automatic arc length) All three welding heads each have their own feeder for 100mm wire spools. The equipment consists of the following: *1 pc Dimetric Gold Track 3 (hour meter shows 72.6 hours "weld time" and 1088 hours "stand by" *1 pc welding head FFIP Small for Ø20- Ø 50mm *1 pc ditto but Medium, for Ø 48 – 90mm *1 pc ditto but Large, for 100-170 mm Completely ready to weld with all cables and remote control The welding heads are in solid transport boxes. Furthermore; *1 case with Tri-Tool 206 B bevelling machine pneumatic drive, 2"-6" •very little used • Bevel pipes from 2" to 6" (60.3 to 168.28mm) • Wall thickness up to 22.23mm) *1 case with Wachs SDB 103/3 pneumatic drive Capacity from 1" to 3'" well used but in good working condition. Dimetric's equipment has welded approximately 70% of the world's nuclear power plants, - both due to precision, operational reliability and robustness. Dimetrics was also the first to be certified to weld hydraulic systems on aircraft. Dimetrics (now together with Canadian Liburdi) is still a leader in welding nuclear power plants. For example, "Framatome" is responsible for the construction of 13 new nuclear power plants in France - and they only use welding equipment from Liburdi - Dimetrics, now Gold Track 7. Hjdpfx Ageycvifs Isi All welding heads can still run on the latest Dimetrics welding machines. My equipment is from the 90s, and I got it from a shipyard that had produced nuclear-powered submarines where this particular equipment was on standby, but was never used for anything other than testing and training. A new piece of equipment with only one welding head and the same functions (AVC and oscillation) quickly costs from the very cheapest some €75.000 and up- of course without bevelling machines. I bought the equipment for use on a job that never materialised (!), and because I had 4 other orbital machines from before, this was rarely used. Now I am stopping working with orbital welding after 50 years in the industry, and continue as a consultant and supplier. This gives me time to load the equipment into a cabinet trailer, connect it to my camper and deliver it anywhere. Price complete delivered anywhere in Europe, including up to 1 week of training, €20000 excl. VAT.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING. Hodpfxox I A Hco Ag Iji

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Hedpfx Asdkp D Hjg Isi Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Heating plates Chamber frame Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Condition: excellent (used), Year of construction: 2007, Tool Tempo Type : TT 280 BJ CA 2007 Hodpfx Aomxkm Asg Ioi

Condition: good (used), Year of construction: 2004, Peripheral devices MArke: Tool - Temp Type : TT - 157E Available 14x pieces Hedpfeh Hbpwjx Ag Isi

Condition: used, Used temperature control unit Hjdpfxeuuacfs Ag Ioi Item number: 10636 Make Tool-Temp Up to 90°C Total height 720mm Overall length 730mm Total width 300mm

Year of construction: 2017, condition: good (used), Temperature control unit Tool Temp TT-181 Stock no.: 503647 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Type: TT-181 Hodpex A Swqofx Ag Ioi Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: good (used), Year of construction: 2018, Temperature Control Unit Tool Temp TT-181 Stock No.: 503645 Machine/Device Type: Temperature Control Unit Manufacturer: Tool Temp Model: TT-181 Year of Manufacture: 2018 Max. Operating Temperature: 150 °C Oil Max. Operating Temperature: 90 °C Water Heating Capacity: 9 kW Water / 3 kW Oil Hsdpjx A Swkjfx Ag Isi Circulation Medium: Water or Oil

Year of construction: 2017, condition: good (used), Temperature Control Unit Tool Temp TT-181 Stock No.: 503648 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Model: TT-181 Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Hedpfxex A Sv Ts Ag Ioi Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: ready for operation (used), functionality: fully functional, TT-188 temperature control units with MP-888 controller from TOOL-TEMP are available for sale; 4 units in stock. Medium: water up to 90°C Heating capacity: 3KW + 6KW = 9KW Cooling capacity: 35KW Hjdpfx Agex Db Tks Iei Filling volume: 6 liters Mold drainage Pump capacity: 60 l/min, max. 4 bar Weight: 55 kg L: 670 mm - W: 260 mm - H: 650 mm

Condition: used, diameter div. Hjdjxyzxxspfx Ag Iji number 44x tool adaptor SK 40

Condition: used, diameter div. Hsdpfx Asxyzxfeg Iei number 44x tool adaptor SK 40

Year of construction: 2017, condition: excellent (used), Tool temp TT-142N/ MP-988 (2017) TOOL-TEMP TT-142 N – Full Equipment & Technical Specification (English) Application: Model N – water up to 140°C Pump with axial mechanical seal Robust high-performance pressurized water temperature control unit Heating capacity: 12 kW Standard Equipment: 1. Temperature controller with self-optimization and digital display of set and actual temperature (°C/°F selectable) 2. Automatic temperature monitoring; alarm on deviation 3. Pump pressure gauge and system pressure gauge 4. Pressure reduction, venting, automatic water filling 5. Scale-resistant heat exchanger 6. Standard pump with axial mechanical seal 7. All water-contact components made from stainless steel or bronze Hsdpfex E Uqbex Ag Iji 8. Heating elements switchable in stages 9. Safety features: automatic level control preventing dry running; mechanical safety thermostat; electronic maximum temperature limiter; main switch; isolation transformer; overload relay for pump protection; acoustic alarm 10. Visual fault indication 11. Unit on castor wheels Special Features: 1. Digital flow indicator with minimum-flow monitoring 2. Optional MP-988 controller with digital interface Technical Data: Temperature range: water up to 140°C Temperature regulation: microprocessor-controlled controller MP-888 with self- optimization; digital display of set and actual temperature; automatic temperature monitoring Flow monitoring: electronic, digital display, automatic minimum-flow alarm Heating capacity: 12 kW (6/6 kW switching stages) Cooling capacity: indirect approx. 60 kW at 140°C Pump performance: motor 1.8 kW; pressure mode max. 5 bar / 110 l/min; suction mode vacuum up to 8 m water column; no booster pump External temperature measurement: no Pressure reduction: yes Leak-stop / mold emptying: no Filling: automatic Connections: Medium: ¾” BSP female Cooling water: ⅜” BSP male (inlet with filter), ⅜” BSP female (outlet) Dimensions and weight: 870 × 360 × 915 mm (incl. wheels) Approx. 107 kg empty Color: zinc grey RAL 7001 Electrical versions: Available for all voltages from 3×200 V to 3×600 V, 50/60 Hz UL/CSA compliant For US market: NPT connections, controller display in °F Electronic Controllers: MP-888 (standard): °C/°F display; analog interfaces 0–5 V, 0–10 V, 4–20 mA; high-precision control via self-optimization; flow indication in l/min or gal/min; minimum-flow alarm MP-988 (optional): digital interfaces RS-485, RS-232, 20 mA loop, CAN-bus, Profibus; supports common communication protocols; temperature difference monitoring; display of up to three temperatures

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min Hodox Emd Topfx Ag Ioi

Year of construction: 2018, condition: good (used), Temperature control unit Tool Temp TT-181 Hjdpfx Aext Rfbog Iji Stock No.: 503646 Machine type/Device type: Temperature control unit Manufacturer: Tool Temp Model: TT-181 Year of manufacture: 2018 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: used, Avia FND-32N1 Tool Milling Machine. Please check out our other listings as well. Hsdpfx Agsv R Ipco Ioi

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obliges the buyer to collect the item punctually between 26/01/2026 and 29/01/2026! Accessories include: approx. 36 tool holders, 2 tool carrier systems. Hedpfx Ajxqmx Ssg Ioi

Year of construction: 2013, condition: used, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Specification: V: 3x380-400 Watt: 25,900 Hsdewu Adbepfx Ag Isi Hz: 50 The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: used, diameter div. number 40x Hsdpfxoww Nbxe Ag Iji tool adaptor BT 40