Used Tool Room Set Up for sale (47,710)

Condition: used, New: Yes Empty weight: 30 kg Part suitable for: trucks 80mm Bwedpoxhzbisfx Aaqow 85mm 90mm 95mm 100mm 105mm Article nr.: Y500999084N-veiling Tools Krachtdop 80-105mm

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 3197, travel distance Y-axis: 420 mm, travel distance Z-axis: 420 mm, Equipment: documentation/manual, Tool presetting device Manufacturer: KECHL Type: Trabant 351-2/M Year: 1995 Movable by hand / with handwheel / button for feed and rapid traverse. Travel paths: X/Y 270 mm In good condition. Bwodpfx Aow N N I Usaqow Documentation available.

Condition: good (used), Year of construction: 1998, measuring range X-axis 330 mm measuring range Z-axis 400 mm range L-W-H 880 x 520 x 990 mm Spindle type: SK 50 (pneumatically fixable, 4×90°) Bodpfx Aow Ht R Aoaqeww Measuring systems: Heidenhain optoelectronic (LS series) Measurement: via integrated projector (20× magnification) Device weight: approx. 250 kg

Condition: used, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 300 mm, Zoller tool presetting device with adapter for SK50, SK40, turning: VDI30 and VDI50. Still in operation and can be tested on site. Bsdpfx Ajxlbc Ioaqoww

Condition: good (used), Manufacturer: SOMET Tip: SDJ 300 Measurable tool diameter: 6 - 300 mm Measurable tool length: 40 - 500 mm Accuracy: 0.002 mm 1x Swap socket ISO 40 1x Swap socket ISO 45 1x Swap socket ISO 50 1x Test mandrel ISO 50 Bwsdpfx Aasd N S Ubeqsw used! Dimensions: 1250 x 600 x 1870 mm

Condition: good (used), Year of construction: 1986, functionality: fully functional, Dimensions (LxWxH) approx. 1,700 x 950 x 1,700 mm Weight approx. 1,300 kg Machine number 833, Digital display Kelch PICO version A 23, Ground clamping surface 1,800 x 520 mm, Clear width in the passage (portal) 740 x 320 mm Hswvu Noitvr Rou Iok Tool plate D 700 mm with 4 holding stations, 3 built-in tool holders. Bsdpfjv Um Rtox Aaqoww

Condition: good (used), Year of construction: 2014, 1 used tool presetting device Make: DMG Mori Model: UNO 20/40 Year of manufacture: 2014 Technical details Measuring range X-axis: 200 mm Measuring range Y-axis: 400 mm Measuring range Z-axis: 400 mm Overall width: 510 mm Overall length: 1,300 mm Bjdpew Skltjfx Aaqjww Overall height: 1,800 mm

Condition: like new (used), Year of construction: 2003, Type VSM400-00185 Voltage 230 V Tolerance -10% - +6% Frequency 50/60 Hz Performance < 1000 VA DIN EN 61010-1 Standard Pneumatic 4 - 6 bar Weight 900 N Year 2003 Bwodpjixqwqofx Aaqjw Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2002, measuring range X-axis 330 mm measuring range Z-axis 400 mm 1 tool presetter Make: KELCH, type: Kalimat C34, year 2002 Measuring range X/Z 330 x 400 mm Bedsw N S Epepfx Aaqjww Easy-Wrap Set measuring software 2 adapters VDI / HSK, tool table

Condition: good (used), Year of construction: 1998, Tool presetter KECHL Type:Trabant 271-2/M Year 1998 Movable by hand / with handwheel / button feed and rapid traverse. Bwjdpfxsr H D N Ao Aaqsw Travel : X/Y 270 mm In good condition . Documentation available .

Condition: new, Year of construction: 2025, Diameter of bolts in the set – 12 mm. Used for milling, iron working, mechanical and drilling processes. In the set: Extension nuts – 4 pieces Flanged nuts – 6 pieces T-slot nuts – 6 pieces Stepped support – Support block, stepped (3 types, 4 pieces each) – 12 pieces Bwsdpfx Aasvxta Nsqsw Stepped clamp (3 types, 2 pieces each) – 6 pieces 3', 4', 5', 6', 7', 8' stud bolts - 4 pieces each Manufacturer: Cormak

Condition: used, Tool presetting device SOMET type SPS 500 U Machine no.: S1 Year of construction: 1987 Table surface: 545 x 1000 mm Travel paths: X = 500 mm, Y = 340 mm Width in portal: 550 mm Bwodpfxedzqrte Aaqjw Height table to portal underside: 250 mm - Longitudinal portal guide right and left on the table - Adjustment via very fine threaded spindles with handwheel - Quick adjustment by electric release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 clamping fixtures for tool measurement - On base with shelf and drawer Required space (L x W x H): 1100 x 700 x 1650 mm Weight: 560 kg Good condition

Condition: new, Year of construction: 2022, functionality: fully functional, Tool length presetting - For CNC-controlled, vertical machining centers - Tool wear/ breakage control - Temperature compensation - Installation on the horizontal table or a slide unit TOTAL TRANSITION 6 mm LED On = push INTEGRATED INTERFACE Yes CABLE OUTPUT 1 = radial CABLE LENGTH (COIL LENGTH) 6 m (3 m) Ø CONTACT 20 mm CONTACT LENGTH 3 × 106 cicli TYPE OF PROTECTION (standard IEC 60529) IP67 Switching signal (skip) FORECAST ≈0 MEASURING FORCE 1.5÷2.2 OPERATING MODE NC & NO REPEATABILITY (2σ) 1 μm PROBING SPEED 50÷200 mm/min CONTACT LOAD 24 Vdc - 20 mA max Bwedpet Sc Sqofx Aaqow Overflow signal OVERFLOW 3 mm OPERATING MODE NC CONTACT LOAD 24 Vdc - 20 mA

Condition: used, TECHNICAL DETAILS - Active digital viewer, number of axis : 2 - Axis : X/Z - Tool holder orientation : 360 [°] - Machine's weight : 90 [Kg] - Overall dimensions machine : 800 x 650 x 1000 [mm] - Projector : 20 [x] - Tool holder : ISO 70 - Power supply : 230 [V] Bwjdpouhb Sgefx Aaqew - Pneumatic : 4 - 6 [bar] - Frequency : 50 / 60 [Hz] - Tolerance : -10 - +6 [%]

Condition: used, Year of construction: 1998, measuring range X-axis 330 mm measuring range Y-axis 400 mm weight of the machine ca. 0,250 t dimensions of the machine ca. 0,88 x 0,52 x 0,99 m Tool presetter - year of manufacture 1998 Workshop PC - year of manufacture 2008 Label printer - year of manufacture 1999 Bodpow Ap Rqofx Aaqeww --> Measuring axes 2 precision guides on both axes in a recirculating ball bearing system with maximum load capacity, each with 2 recirculating ball bearings per guideway, preventthe measuring slides from yawing and pitching. --> Optoelectronic measuring systems Heidenhain LS, centred in both measuring axes for position determination in the centre of the measuring slides. --> Tool holders Hardened SK 50 tool spindle with taper in gauge quality, mounted in precision roller bearings for maximum concentricity and reproducibility. --> Rotation of the tool spindle can be pneumatically clamped at the touch of a button, Positioning 4x 90° for stationary tools via pneumatic index bolts. --> Scanning of cutting edges High-quality profile projector with 150 mm matt disc diameter and 20- x magnification for non-contact measurement and reliable reading of the cutting position in the projector. --> Rotatable and fixed crosshairs for checking the radius and angle of the tool cutting edge. - functional - not in need of repair incl. measuring computer, label printer, screen and keyboard

Condition: excellent (used), Year of construction: 2018, Serial Number : H300F3-00120 Z-axis measuring range : 350 mm Bwsdpfx Aajwhv Nwsqjw X-axis measuring range : 300 mm Machine weight : 250 kg Mouse and USB computer display Turret table available. Multiple tool holders can be mounted on the table Machine was purchased new but never used. Very good condition, never used

Condition: ready for operation (used), Year of construction: 2005, A high-precision, modular Zoller V420DZ presetting and measuring machine for rotating tools is available. Measuring range X/Z: 220mm/500mm, max. tool diameter: 420mm, max. tool weight: 45kg, machine dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 1150kg. Including base frame, PC, monitor, printer and measuring software. Documentation available. On-site inspection is possible. Bwedpfx Ajwlt Irjaqew

Condition: used, Year of construction: 1991, measuring range X-axis 300 mm measuring range Y-axis 300 mm Table dimensions 800 x 800 mm taper ISO 30 Bwjdpfstv Icnjx Aaqsw voltage 220 V / 50 Hz total connected load 0,3 kW weight 0,5 t dimensions of the machine ca. 1,5 x 1 x 1,6 m • Tool presetter with taper SK 30, SK 40 is also optionally possible, • Display of measured value ZOLLER DA 6050 / 0266, serial no: H320/066

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 316 mm, measuring range Y-axis: 120 mm, measuring range Z-axis: 315 mm, Zoller Hyperion 320EZ Tool holders for Miyano, Boley, and Index machines Bedpewwl S Hofx Aaqeww

Condition: used, TECHNICAL DETAILS - Tool holder : HSK 40 - measuring range Z : 250 [mm] Bwedpfx Asuhb Smoaqsw - measuring range X : 300 [mm] - swiveling diameter : 240 [mm] - max. tool weight : 20 [kg]

Condition: good (used), drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, tool box -Brake piston reset tool: 22 parts -Contents: see photos -Dimensions: 200/340/H50 mm -Weight: 2.5 kg Bsdpfjvnd Ddox Aaqsww

Condition: used, TECHNICAL DETAILS - Active digital viewer, number of axis : 2 - Axis : X/Z - Tool holder orientation : 360 [°] - Machine's weight : 90 [Kg] - Overall dimensions machine : 800 x 650 x 1000 [mm] Bwsdpfouhb Syjx Aaqsw - Projector : 20 [x] - Tool holder : ISO 70 - Power supply : 230 [V] - Pneumatic : 4 - 6 [bar] - Frequency : 50 / 60 [Hz] - Tolerance : -10 - +6 [%]

Year of construction: 1998, condition: good (used), tool setting device, tool presetting device, milling cutter setting device -Measuring range X-axis radius: mm -Z-axis: 630 mm -Display accuracy: mm Bsdpfxepam Ave Aaqjww observation unit -Projector: mm -Enlargement: crosshairs -360 degree protractor -Dimensions: 570/1720/H1875 mm -Weight: 387 kg

Condition: used, TECHNICAL DETAILS Tool presetter for Deco 7 Bedeuhb Saopfx Aaqeww

Condition: used, Tool holder, milling holder, milling tool, adapter, intermediate sleeve, presetting device Bwedspix Nkepfx Aaqow -Milling holders: Adapter for tool presetting device 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Levy/Price: complete -Total dimensions: 500/300/H170 mm -Weight: 34.4 kg