Used Torque 600 Nm for sale (15,572)

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Dwedpfxe Ain Rge Aarjd Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, overall weight: 11,000 kg, Equipment: documentation/manual, saw blade guard, scorer, BIESSE Selco WNTR 600 with turning table . Made in 2003 • Max. blade projection: 132 mm • Cutting lengths: 4,500 mm • Main saw motor: 18 kW • Main saw blade diameter: 430 mm • Scoring saw blade diameter: 200 mm • Saw carriage speed: up to 150 m/min (brushless drives) • Pusher speed: up to 90 m/min • Pusher grippers: independent pneumatic grippers • Control system: OSI Plus numerical control Dodpfe Ahnc Tox Aarowd • Machine layout: angular panel sizing possible by turning table, make it possible to cut two lines for automatic rip and cross-cutting . First time installed in 2004 and stil located on its original place , all machine function are 100% operative. Price 12 500 euro ex. VAT is included disassembling, packing and loading by crane. No VAT for sale outside Norway. Rekman Maskin&Service work with service of Biesse machine since 1986 here in Norway.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: Dwsdpfxj Ain Rce Aarod The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, Manufacturer: Bridgeport / Hardinge Model: GX 600 Dwedjz Rz Igopfx Aarod Year of construction: 2008 Control system: Siemens 810D Machine type: CNC vertical machining center Axes: 3 (X, Y, Z) Travel distances: X-axis: 600 mm Y-axis: 540 mm Z-axis: 540 mm Distance from spindle nose to table: 145–685 mm Work table: Table dimensions: 750 × 540 mm Max. table load: 700 kg T-slots: 3 × 18 mm Main spindle: Spindle speed: 8,000 rpm Spindle power: approx. 15 kW Tool holder: SK40 Tool changer: Tool magazine: 20 positions Max. tool diameter: 94 mm Max. tool length: 250 mm Max. tool weight: 6 kg Tool change time: approx. 6 seconds Feed rates: Rapid traverse X/Y/Z: 36 m/min Max. working feed rate: 12,000 mm/min Accuracy: Positioning accuracy: 0.010 mm according to ISO 230-2 Machine data: Machine weight: approx. 5,260 kg Coolant tank: 230 liters Compressed air supply: approx. 5 bar

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC lathe Okuma LU 3000 EX 2ST-600, 224198 Dodj Ah Satjpfx Aarowd Control: OSP-P300LA Year of manufacture: 09/2019 Internal machine number: 85 Turning length: 600 mm Maximum turning diameter: 410 mm Swiveling diameter over bed: 580 mm Spindle speed: 50 - 5,000 rpm 2 tool turrets A-turret: 12 tool stations B-turret: 8 tool stations Equipment / accessories: - Chip conveyor - One Touch IGF - Blum 3D measuring probe tool monitoring system - Reinforced coolant pump, 80 bar, Interlit Drum filter with additional water tank and high-pressure pump, 80 bar - Hainbuch clamping chuck, Kombi 100 - Automatic door - Touchsetter

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC lathe Okuma LU 3000 EX 2ST-600, 224197 Control: OSP-P300LA Year of manufacture: 06/2019 Internal machine number: 84 Turning length: 600 mm Maximum turning diameter: 410 mm Dsdps Ah R Rrefx Aarjwd Swiveling diameter over the bed: 580 mm Spindle speed: 50 - 5,000 rpm 2 tool turrets A turret: 12 tool stations B turret: 8 tool stations Equipment / Accessories: - Chip conveyor - One Touch IGF - Tool monitoring system Blum 3D measuring probe - Reinforced coolant pump, 80 bar, Interlit Drum filter with additional water tank and high-pressure pump, 80 bar - Hainbuch chuck combination 100 - Door automation - Touch setter

Condition: ready for operation (used), Year of construction: 2007, Make: DMG Type of machine: Nef 600 Year of manufacture: 2007 Control system: Fanuc 210 is Machine's weight: 5,5 t Tool holder: VDI 40 x-travel: 320 mm z-travel: 1250 mm Speed range: 3000 U/min Cutting diameter: 600 mm Turning length: 1250 mm Overall dimensions: 4000 x 2200 x 2000 mm Tool turret - slots: 8 Pl. Dwjdpfx Aaexnpbqorod Spindle opening: 90 mm

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Dods Ahkxcjpfx Aarjwd Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: used, total length: 2,000 mm, total height: 2,400 mm, total width: 1,350 mm, Year of manufacture: 2017 Colour: Grey Empty weight: 2.500 kg - Details: - └ Description: Excluding magnet - Year: 2017 - Serial number: 600 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Hydraulic unit power [kW]: 3.0 - Oil tank capacity [L]: 48 - Number of shafts [pcs.]: 1 - Opening width [mm]: 600 - Opening length [mm]: 250 Dwodj Ab An Iopfx Aarsd - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 20+ - Transport dimensions: 2000mm x 1350mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: repair required (used), Compressor-Controlled Expansion Vessel Automation, Flamco Flexcon M-K 1600, Used machine Manufacturer: Flamco B.V. (Netherlands) – Premium manufacturer of HVAC and heating system technology Type / Series: Flexcon M-K 1600 (Compressor-controlled expansion automaton) System type: Diaphragm expansion vessel with control unit for heating and cooling systems Nominal capacity: 1600 liters Condition: Used, Compressor is missing from the vessel Overall dimensions: Dwjdpfx Aozkbcrearod Technical and operating parameters: Maximum working pressure: 6.0 bar / 10.0 bar (depending on specific model variant, to be verified on nameplate) Maximum system temperature: 120 °C Maximum continuous diaphragm temperature: 70 °C Control / Supply voltage: 230 V / 50 Hz (or 400 V depending on the compressor block configuration) Protection class: IP 54 (Dust and splash-water protected control cabinet) Suitable Application Areas: The Flexcon M-K is a high-performance, compressor-controlled expansion unit specifically designed for pressure maintenance in sealed heating, solar, and cooling systems. Industrial and district heating systems: Precise, fluctuation-free pressure maintenance for large-scale heating networks and thermal stations. Office buildings and public facilities: Expansion volume compensation for central HVAC, cooling, and heating systems. Optimal degassing: The compressor-controlled operation minimizes system pressure drops, preventing bubble formation and reducing pipeline corrosion.

Year of construction: 2022, operating hours: 2,200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VSSN49LWAPFP4PC, Steam sterilizer for use in laboratories, research, the pharmaceutical industry, biotechnology, etc. • 600-liter stainless steel chamber, AISI 316L • Double sliding door • HMI – Operating panel with a 7" Allen Bradley touchscreen, featuring a PLC, positioned on top of the chamber. • Onboard thermal printer • Water ejector • Cooling system • Solenoid valves or pneumatic valves • Load control probe • Gravity cycle • Liquid cycle • Pre- and post-vacuum cycles • Leak test Dodo Aiikbspfx Aarjwd • Chamber rails Electric steam generator Valves and components made of high-quality AISI 316L stainless steel.

Condition: good (used), Year of construction: 1988, Ref. -No.: 10396 Manufacturer: KELLENBERGER Type: 600 U - Nr. 40 Year of construction: 1988 Type of control: Konventionell Control: N/A Storage location: Halberstadt Dwedpfx Ao Ahmupsarsd Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500/1700/2200/3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400/10-400 Max. Grinding length: 900 mm

Year of construction: 2021, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VSSN49LWAPFP4PC, Steam sterilizer for use in laboratories, research, the pharmaceutical industry, biotechnology, etc. • 600-liter stainless steel chamber, AISI 316L • Double sliding door • HMI – Operating panel with a 7" Allen Bradley touchscreen, featuring a PLC, positioned on top of the chamber. • Onboard thermal printer Dwsdpfe Aiihnjx Aarod • Water ejector • Cooling system • Solenoid valves or pneumatic valves • Load control probe • Gravity cycle • Liquid cycle • Pre- and post-vacuum cycles • Leak test • Chamber rails Electric steam generator Valves and components made of high-quality AISI 316L stainless steel.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 55, working width: 600 mm, compressed air connection: 6 bar, type of input current: AC, total width: 2,250 mm, total length: 7,220 mm, total height: 1,840 mm, stack height: 500 mm, overall weight: 3,000 kg, Equipment: CE marking, PERONDI C800 laminating machine and PERONDI R4L 600 in good condition, available for sale. The sale also includes the following equipment, providing a complete and versatile production setup: Hot-melt glue system Feeder Vacuum belt Pressing rollers Dwsdpfx Aasz Hm Ntorjd All included equipment has been part of the production setup and is offered together with the machines. The equipment has been well maintained and carefully operated and is in good condition. Machine highlights: Manufacturer: PERONDI Good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for continued production Inspection possible by appointment This is an attractive opportunity to acquire a well-maintained PERONDI C800 and PERONDI R4L 600 laminator with limited daily use and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 516367X00016, Year of construction: 2020, operating hours: 11,276 h, load capacity: 3,500 kg, lifting height: 5,950 mm, load center: 600 mm, mast type: duplex, battery voltage: 80 V, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 5,950 mm Overall height: 2,800 mm Fork length: 1,200 mm Load center: 600 mm Dsdpfx Aas Ah Rczjrowd MACHINE DETAILS Mast type: Duplex mast Front work lights: 3 units Rear work lights: 6 units Total weight: 4,752 kg Overall height: 2,800 mm Operating hours: 11,276 h EQUIPMENT Duplex mast Double auxiliary hydraulics Full cabin with heater Battery with charger Blue Spot Work lights, front and rear Windshield wipers, front, rear, and top Radio

Condition: used, NEOS PA Range Ventilated negative temperature refrigeration Temperature range: -20 to -10 °C Power supply: 230 V single-phase 50 Hz Power consumption: 580 / 840 W Refrigerating capacity: 600 W Volume: 486 L Capacity: 20 trays 600 × 400 mm 1 full door with automatic closure Interior: AISI 304 stainless steel Cabinet / door insulation: 75 / 65 mm Adjustable stainless steel legs: 120 to 150 mm Refrigerant: R290 Hot gas defrosting: 4 cycles / 24 h External dimensions (W × D × H): 790 × 820 × 2025 mm Internal dimensions (W × D × H): 640 × 682.5 × 1440 mm Weight: 140 kg The ILSA NEOS PA AN64S2510 negative temperature pastry cabinet is designed to store pastries at temperatures between -20 and -10 °C. Suitable for 600 × 400 mm trays, it combines ventilated refrigeration, a full door, and a gross capacity of 630 L, or 486 L net. What sets this model apart This version features an exterior coating of PPS on steel and an interior of AISI 304 stainless steel. The 20 pairs of stainless steel slides included as standard organize the storage of the trays. The tropicalized monoblock refrigeration unit ensures rear-ducted airflow within the compartment. Key benefits Tiered storage for 600 × 400 mm trays Ventilated refrigeration with rear-ducted airflow Dwodpfx Aao Agu D Nsrjd Automatic defrosting with hot gas Automatic condensate evaporation Rounded interior corners for easy cleaning Full door with automatic closure and standard lock Adjustable stainless steel legs for leveling

Condition: used, Year of construction: 2004, Horizontal band saw HEMA HTR 600 Dsdpfxj Aigk Te Aarewd Year of manufacture: 2004 For various materials (depending on the installed saw blade) Technical data: Wheel diameter: 600 mm Working height: 955 mm Total height: 1800 mm Total width: 2550 mm Total length (conveyor belt): 2820 mm Max. cutting height (distance conveyor belt - saw blade): 140 mm Saw blade length: 5600 mm Saw blade width: 8 to 25 mm Saw blade thickness: 0.65 mm Cutting speed: 1640 m/min Conveyor belt speed: 0.5 to 5 m/min Conveyor belt width: 650 mm Weight approx. 700 kg Dust extraction connections - Cutting point: 100 mm - Deflection point: 100 mm - Conveyor belt extraction connection: 100 mm Motor power - machine: 2.2 kW Motor power - feed: 0.12 kW Voltage: 3 x 400V

Condition: used, Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table width: 550 mm, table length: 700 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSK 40, number of slots in tool magazine: 20, Vertical Machining Center Manufacturer: RÖDERS Model: RFM 600 DS Year of manufacture: 2008 Control system: Röders RFM 600 DS Technical data: - X-travel: 600 mm - Y-travel: 450 mm Dedpfx Ajx Iwg Dearowd - Z-travel: 300 mm - Spindle speed: 42,000 rpm - Table size: 700 x 550 mm - Tool holder: HSK 40 - Number of tool positions: 20 Equipment: - Extraction system (Keller) - Pallet system (Röders RC 2) Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2000, 1 Coordinate drilling machine HARTKÄMPER KB50-600 Manufacturer: HARTKÄMPER, Type: KB50-600, Year of manufacture: 2000 Djdo Ahna Hepfx Aarjwd Dimensions (W x H x D): approx. 100 x 220 x 250 cm, moving carriage above the spindle, 2-hand operation, operator terminal, and roller conveyors on both sides approx. 60 x 600/700 cm with supports and table frame.

Condition: excellent (used), Professional height gauge from the renowned Japanese manufacturer Mitutoyo. The device is designed for precise height measurement and scribing on surface plates. This model offers a measuring range up to 600 mm and is equipped with a dial indicator and fine micrometric adjustment, ensuring very precise dimensional control. The robust construction and high-quality workmanship characteristic of Mitutoyo guarantee repeatable and reliable measurements. — Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator Dwedpoz Smxhsfx Aarjd • Indicator scale division: 2.5 µm • Micrometric adjustment • Stable, heavy base • Clear measuring scale — Applications: • Measurement of component heights • Scribing on granite surface plates • Dimensional inspection • Workshops, tool rooms, quality control departments — Condition: Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. — Scope of delivery: • Mitutoyo height gauge • Dial indicator • Micrometric adjustment mechanism

Condition: good (used), clear span: 2,700 mm, load capacity: 3,000 kg, Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Installation Technical Data: Number of racking rows: 01 piece Length per racking row: 16,900 mm Number of bays per row: 06 pieces at 2,700 mm each Number of levels plus ground level: 05 pieces Volume Technical Data: Pallet spaces per bay: 18 pieces Pallet spaces per row: 108 pieces Total pallet spaces: 108 pieces Assumed specifications: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Scope of supply includes: 07x pallet racking frames, used Material finish: sendzimir galvanized Frame type: P113 Profile dimensions: 100 x 100 x 2 mm Including horizontal and diagonal bracing, frame protectors and base plates Frames are pre-assembled (bolted truss structure) Height: 8,000 mm Depth: 1,100 mm 60x pallet racking beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Bracket: 5 HK (Hooks) Maximum load per pair of beams: 3,000 kg (uniformly distributed load) Note: The functionality of the beams is ensured despite the holes SSI project with heat dust shields that, according to the manufacturer's information, were bolted on! 120x Safety pins, used Material finish: sendzimir galvanized For securing the cross beams against unintentional lifting 28x expansion anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Design: completely galvanized Dwsdpox Ebrpefx Aarod For leveling the frames installed on uneven floors 01x Load sign With specifications for bay and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to extra costs, which can be requested separately from us depending on the place of delivery and scope of delivery.

Condition: used, Number of doors: 4 Configuration: single depth Capacity: 38 trays Tray size: 400 x 600 mm Layout: 1 tray per level Storage temperature: -22 to -12 °C Electronic control: Bi-Tronic Slide Standard finish: white interior and exterior Insulation: HFC-free polyurethane foam Insulation thickness: 100 mm Insulation density: 43 kg/m³ Door seals with heating wire Thermostatic expansion valve Programmable electric defrost Refrigeration unit: GN4T Refrigerant: R452A Electrical power: 610 W Power supply: 400 V three-phase / 50 Hz Optimal ambient temperature: 32 °C Maximum ambient temperature: 40 °C Feet or castors: optional Delivery: disassembled, pre-assembled Dimensions (L x W x H): 1530 x 950 x 2250 mm Weight: 349 kg HENGEL CCN40 negative temperature storage unit – 38 trays 400 x 600 mm and 4 doors General description The HENGEL CCN40 negative temperature storage unit is designed for storing previously frozen products in bakery and pastry laboratories. With a capacity of 38 trays measuring 400 x 600 mm, it allows for the organization of preparations on individual levels in a single-depth configuration. Dwsdo Ah E Apopfx Aarjd Its negative storage temperature range, between -22 and -12 °C, meets the needs for low-temperature storage. Its four independent doors facilitate access to the different levels, while the electronic Bi-Tronic Slide control ensures the management of the refrigeration operation.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,500 mm, total height: 1,900 mm, total length: 5,000 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in wood handling equipment. For the past 15 years, we have also been active in the pallet industry and have developed numerous machines for nailing, automatic feeding, and stacking of wood over the years. We manufacture both standard machines and custom-tailored solutions to meet customer requirements. The DNM1600 is a flexible, compact, and efficient pneumatic nailing machine designed for the production of decks in the pallet industry. The user-friendly program allows for very rapid changeover, and the machine can store settings for over 100 different deck specifications. It features Bostitch nail guns equipped with nail magazines for jumbo coils with indicators. The machine enables the manufacturing of asymmetrical decks and is fitted with flexible cassettes for boards. A protective cover ensures noise reduction and safe operation. The machine is operated via a 10-inch touchscreen and utilizes a Beckhoff control system. Standard machine specifications: - Deck board: Length 600–1600 mm, width 75–125 mm, height 16–28 mm - Stringer: Length 600–1500 mm, width 50–125 mm, height 16–28 mm - Deck/Stringer pallet size: Length 600–1600 mm, width 600–1500 mm Dodpfey Izb Ejx Aarewd A two-way pallet kit is available as an additional option, allowing the production of stringer pallets/two-way pallets with a maximum stringer height of 100 mm. Capacity: - 3 decks/min (with 5 deck boards) Machine dimensions: - Length: 5000 mm, width: 2500 mm, height: 1900 mm The machine is CE-marked. The machine can be equipped with automatic board feeding and automatic deck/pallet stacking. For more information, pictures, or videos, please get in touch.

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Dwjdpfjrnkhysx Aared Min. feed step: 0.001 mm Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Used Morton stainless steel model FKM600D ploughshare mixer approximately 600 litre capacity. Unit has (3) stainless steel ploughs and (2) stainless steel half ploughs. Unit is driven by a 11kW, 3-phase, 50Hz, 415V motor operating at 1460rpm through a reduction gearbox with the ratio of 10.22 giving a shaft speed of approximately 143 RPM. Unit has provision for (2) choppers. Unit is mounted on a stainless steel frame. Specifications: Bowl Volume: 600 L Dsdpfx Aaj Agvzherewd Motor Power: 11 kW Material Of Construction: Stainless Steel