Used Transducer for sale (113)

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines Guodpfsy A Iftjx Aiheh -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm Gujdpfx Aisdcmdlohoh 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA200 Platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Made entirely of stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control system: Fatek, HMI: Weintek Godpsv U A Izefx Aihsuh Electrical power: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface washing/oil separator for bath maintenance - Ultrasonic immersion transducer with 2-way sound - Power: 2,000 watts eff. / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration system from the Glogar Technology Center, available immediately

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Number: 4x lowering unit available -Price: per piece -Dimensions: 250/220/H85 mm -Weight: 2.3 kg/pc. Gusdpsxzb E Ijfx Aihoh

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed Godpfxexrz Tao Aiheuh -Manufacturer: Nucleus, lowering unit - flatbed for ultrasonic welding machines -Eco FR360102 -Servomotor: NuDC42I25R-1000 Voltage 24 V -Number: 5x lowering unit available -Price: per piece -Dimensions: 340/240/H130 mm -Weight: 4.5 kg/pc.

Condition: used, The used Coperion K-Tron K-ML-FB-130QC gravimetric dry solids feeder is a high-precision dosing system with a differential belt scale, manufactured in stainless steel. The unit combines continuous and particularly gentle product conveying via a dosing belt with precise gravimetric control, enabling uniform and controlled dosing of bulk materials Name: Powder Feeder Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year built: Unknown Condition: Used Price: On demand -Hopper capacity: Storage hopper with an approximate capacity of 75 liters -Drive power: Main drive for the dosing belt and material feed powered by a 0.25 kW electric motor. Vertical agitator with an independent 0.25 kW drive -Agitator speed: Low operating speed of 5.6 rpm for particularly gentle product handling -Weighing technology: High-precision SFT (smart force transducer) load cell technology for accurate gravimetric control and precise dosing. Godpfx Asiv Ic Ejihjuh -Material: Hopper and product-contact components manufactured from robust stainless steel -Dosing belt: Polyester fabric belt with a polyurethane coating, designed for easy cleaning. The support structure can be completely removed for cleaning and maintenance purposes -Dimensions: Length: 800 mm x Width: 700 mm x Height: 1.200 mm -Empty weight: Approx. 100 kg

Year of construction: 2025, operating hours: 50 h, condition: as good as new (ex-display), Spray-flood cleaning system – parts cleaning system for the highest requirements or precision and fine cleaning. Basket useful dimensions, loading basket: L x W x H 600 x 400 x 300 mm Maximum loading weight: 150 kg; loading trolley in front of the system included. 3-tank design: Cleaning (600 liters) Rinse 1 (600 liters) Rinse 2 (600 liters) System electrically heated - Cleaning processes: Spraying, injection flooding, ultrasonic - Ultrasonic (rod transducer): 3,000 watts effective / 6,000 watts peak - 30 kHz Godpfx Aeg Itg Esihjuh - Basket remains stationary, oscillates, or rotates during the cleaning, rinsing, and drying process (freely selectable in the program) - Hot air and vacuum drying (vacuum pump, manufacturer Leybold, 300 m3/h) - Full filtration of all tanks (3), each with a Topline bag filter (manufacturer Eaton), filter fineness freely selectable - Automatic water replenishment per tank - Preparation for coalescing oil separator - Preparation for the installation of a closed-loop system for the treatment of rinse water Control: Siemens S7-1200 with 16 programs Year of manufacture: 12/2025

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Maximum usable height: 450 mm Maximum load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Completely constructed from stainless steel Thermally and acoustically insulated External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical power requirement: 15 kW Includes: Guodexuzyfspfx Aiheh - Automatic pneumatic goods lift - Surface spray/rinse and oil separator for bath maintenance - Ultrasonic submersible transducers with dual-side sonication - Output: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Demonstration unit from the Glogar Technology Center, available immediately

Condition: used, Pressure sensor, pressure transmitter, pressure transmitter, pressure switch, pressure transmitter, absolute pressure transmitter, measuring transducer -Manufacturer: hwg halstrup walcher, absolute pressure transmitter unused in original packaging -Type; AD 1000 -Measuring range: 800 - 1200 mbar -Dimension: 150/120/H75 mm -Weight: 0.7 kg Godpfx Aioqrwyfshsuh

Year of construction: 2002, condition: good (used), Complete Desoutter screwdriver system consisting of: 1 x Transducer controlled angle screwdriver Desoutter ERA40J Art.Nr .: 6151650800 Torque range: 8 to 40 Nm Output: 3/8 " Number of revolutions. 900 min-1 Length: 458 mm Weight: 2.1 kg 1 x Transducer controlled angle screwdriver Desoutter ERA60J Art.Nr .: 6151650810 Torque range: 15 to 60 Nm Output: 3/8 " Number of revolutions. 570 min-1 Length: 469 mm Weight: 2.2 kg 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Moeliche screw strategies: Torque control with angle control Rotation angle control with torque control Gusdpfxsdcmizo Aihjh Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 2 x motor cable for hand screwdriver 5 m length Art.Nr .: 6159170720 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: excellent (used), Pressure sensor, pressure transmitter, pressure transducer, flush-mounted pressure sensor -Condition: Original packaging very good -Manufacturer: WIKA, Pressure transmitter type Transmitter S-11 -Measuring range: 0-600 mbar -Input: 10-30 VDC -Output: 4-20 mA -Thread: 1 inch -Quantity: 1 sensor available -Price: per piece -Cardboard dimensions: 180/80/H60 mm -Weight: 0.4 kg Guedpfx Ajzufh Toihjh

Condition: like new (used), multifunctional tool for checking the safety of low voltage electrical systems SEFT950 Carlo Gavazzi SEFT 950, serial number: 002814/21006, instrument complete with transport bag, cables of various sizes, transducer for converting the measurements stored on the PC, equipment for measurements in medical offices, pegs for step and contact measurements or ground measurements, performs all types of electrical measurements, with an instruction manual. Measure Low-Ohm = Rpe Measure isolation = Riso Measurement of earth and ground resistivity = Re/p Measure LOOP = LOOP Measure RCD = RCD Measure voltage drop = %ΔU Measure the cyclical voltage of the phases = O/V Guodpfxeg Tdxds Aiheh Price Euro 800 + VAT Delivery condition, FCA: Oradea/Romania We can deliver/export everywhere in the World. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic washing system – ultrasonic cleaning unit Chamber made of stainless steel 1.4401 (AISI 316L) - including insulated hinged lid - including level monitoring / dry-run protection - including 1 stainless steel basket Gsdpokuy D Hofx Aihsuh - Bottom ultrasonic transducers, frequency: 38 kHz, power (effective/peak): 1,600/3,200 watts - Heating up to 80°C, adjustable; power: 6,000 watts - Basket dimensions: L x W x H 920 x 380 x 350 mm - Tank dimensions: L x W x H 1,000 x 450 x 450 mm - External dimensions: L x W x H 1,210 x 690 x 900 mm - Max. load weight of the basket: 50 kg - Total weight of the system: 160 kg - The unit is mobile

Condition: excellent (used), SIEMENS Guodpfx Aioxmv Injhsh TELEPERM measuring transducer 315 bar Further data: see photos The measuring transducer is available in multiple units.

Condition: ready for operation (used), smar LD 301 Intelligent measuring transducer, serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Gjdpfxez Acz Ts Aihouh

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic washing system – ultrasonic cleaning device Chamber made of stainless steel 1.4401 (AISI 316L) - includes insulated hinged lid - includes level monitoring / dry-run protection - includes 1 stainless steel wire mesh basket - Bottom ultrasonic transducer, frequency: 25 kHz, power (effective/peak): 600/1,200 watts - Heating up to 80°C, adjustable; power: 2,600 watts - Basket dimensions: L x W x H 320 x 320 x 280 mm - Tank dimensions: L x W x H 420 x 400 x 350 mm Guodpfxolccuze Aihoh - External dimensions: L x W x H 520 x 650 x 850 mm - Max. load capacity of the basket: 30 kg - Device is mobile

Condition: new, Type CK-3000B Height of working table 800mm Working depth 65mm Working length 3100mm Guedpfxeqxtf Ds Aiheh Motion controller Loran Max traveling speed 150m/min Max working speed 105m/min Control system TPR Spindle power 2x 2.2 kW Spindle speed 0-18000 rpm Transducer Jiale Air pressure 0.6-0.8 Mpa Motors power 750+750+400W Transport dimensions 4200x1700x1400mm Weight 900KG Price 6499 Eur (EXW Jonava, Lithuania)

Condition: as good as new (ex-display), Year of construction: 2025, Manual operation Temperature control via a digital thermostat. DIMENSIONS External dimensions: 1490 x 900 x 970 mm Internal dimensions of the cleaning tank: 900 x 600 x 640 mm Usable working dimensions: 870 x 525 x 400 mm Operating height: 970 mm Capacity of the cleaning tank: 351 l Material: Stainless steel. Thermoacoustic insulation: 50 mm ULTRASONIC Transducer: Piezoelectric Ultrasonic power: 4 kW Ultrasonic frequency: 28 kHz Frequency sweep: Yes Power regulation: 16 positions Heater: 7.5 kW Lid: Manual Gsdpfx Asf Hqayeihouh Drain valve ("): 1 ¼ " Touchscreen: 4.3 " Heater timer: Yes

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables. Guodpfefz I N Tox Aihsh

Year of construction: 2025, condition: new, machine/vehicle number: H3000-H5000TM, Universal Testing Machine H3000TM-H5000TM according to DIN EN ISO 7500 Gusdeiq Hxkopfx Aihoh The H3000TM-H5000TM series universal testing machine is a single-spindle machine with a robust design made of aluminum and V2a, featuring ball screws, ball bushing guides, and a toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a foil keyboard. A 2-line LCD display shows the force and displacement. The testing machine can be used as a standalone unit or connected to a PC via a USB interface. The displacement measurement is performed using an encoder with a visible resolution of 0.01 mm on the LCD (internally 0.0001 mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally, a second channel can be added for a second force transducer or a displacement sensor. The universal testing machine is manufactured with two different travel distances, 500 mm or 1200 mm (without load cell and testing tool). Further scope of supply: A load cell up to the nominal load, 220-volt cable, USB cable, description, CE declaration of conformity. Further information can be found in the attached description. Force transducer 3000N-5000N Measuring range: 5-5000N tensile and compressive, with nom. 2mV/V Output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate. Long-travel extensometer HE 900mm measuring path, measuring arms motorized, including electronics. Accuracy class Class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optically incremental Measuring path 900 mm, less the measuring length Display error 6 µm or 2 % Resolution 1 µm Actuation force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo setting is done manually Measuring arms Opening and closing are motorized Specimen diameter 0-30 mm Specimen thickness 0-30 mm Specimen width 0-100 mm Weight approx. 32 kg Scope of supply Extensometer complete with electronics Cutting, round: 1 set of hard metal / rubber Wear parts Measuring blades optional rectangular blades CAUTION: When using optional blades, a readjustment of the Lo stop is required.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Guedpfefz Dtzox Aihoh materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 250 mm capacity 90 degrees: square 250 x 250 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 260 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm band speed 15 - 100 m/min dimensions of saw-band 3650 x 27 x 0.9 mm Control MEP CNC total power requirement 2.2 kW weight 1190 kg Fully automatic electro-hydraulic band saw, featuring additional operating modes: * semi-automatic * semi-automatic dynamic * manual Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) * MEP Direct control technology * User interface with intuitive 10" touchscreen display * Mechanical buttons for saw operating functions * Guarantees reliable, simple, and intuitive operation * Real-time monitoring of all cutting parameters * Pivoting arm allows for convenient and safe operation * Display and logging of alarm and error messages * Massive data storage: up to 100,000 programs and 9,999 cutting sequences - Miter cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic, and manual cycles * Miter cuts from 45° right to 60° left - Selectable manual or semi-automatic dynamic cycle * For performing cuts without programming - Protective enclosure for operator safety - Infinitely variable cutting speed regulation from 15 to 100 m/min * Via frequency inverter - Latest-generation hydraulic power unit * High performance with low energy consumption - Material feed via stepper motor and recirculating ball screw * Mounted on opposed ball bearings * Repeatable 600 mm single stroke for cutting any length - Saw head positioning and feeder movement via joystick - Automatic detection of the initial cut position - Manual band tension monitoring with display readout * Via electronic transducer - Automatic cutting load monitoring * Via a servo valve mounted directly on the cylinder - Coolant tank integrated into the machine base - Chip-clearing brush Gujdjz Albiepfx Aihoh - Bi-metal saw blade for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = +/- 0.1 mm per feed stroke Manufacturer information – please note: If this saw is installed on a mains circuit equipped with a residual current device (RCD), the RCD must be universal-current sensitive (Type B) and rated at no less than 300 mA.

Condition: new, Year of construction: 2026, Ultrasonic cleaning system – ultrasonic cleaning unit Chamber made of stainless steel 1.4401 (AISI 316L) - including insulated hinged lid - including level monitoring/dry-run protection - including 1 stainless steel basket Gedelcctgspfx Aiheuh - Bottom-mounted ultrasonic transducers, frequency: 25 kHz, power (effective/peak): 500/1,000 watts - Heating adjustable up to 80°C; power: 5,000 watts - Basket dimensions: L x W x H 520 x 230 x 200 mm - Tank dimensions: L x W x H 600 x 300 x 270 mm - External dimensions: L x W x H 680 x 420 x 490 mm - Max. load weight of the basket: 20 kg - Unit is mobile

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Guedsfzk Ewjpfx Aihoh In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: DZ-202409012, heating capacity: 3 kW (4.08 HP), power: 1.5 kW (2.04 HP), operating temperature: 95 °C, usable tank capacity: 99 l, Equipment: documentation/manual, The machine was purchased new from the manufacturer in 2024, has only been used briefly, and is therefore in like-new condition! The system consists of four independent chambers and enables a complete cleaning process, including washing, rinsing, and drying. TECHNICAL DETAILS Number of units: 4 Housing material: Stainless steel AISI 304 Wall thickness: 2 mm Units: Ultrasonic washing chamber and ultrasonic rinsing chamber Ultrasonic power: 1,500 W (30 transducers) Frequency: 40 kHz Heating power: 3 kW Gujdpfxeyx Anne Aihoh Maximum operating temperature: 95 °C Circulation and filtration system Dynamic lifter system (“up & down” technique) for enhanced cleaning performance Final rinse chamber Tank capacity: approx. 99 l Heating power: 3 kW Hot air drying chamber Heating power: 3 kW High-performance blower Temperature control MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,880 x 1,350 x 1,180 mm Machine weight: approx. 480 kg EQUIPMENT Separate fluid supply and discharge for each chamber Suitable for use with industrial cleaning chemicals Stainless steel wire baskets Drain valves and level sensors Electronic control system Complete technical documentation and certificates The washing system is designed for precision cleaning of machined metal parts, particularly for the removal of machining oils, chips, and fine particles following turning, milling, or grinding operations.