Used Translation Stage for sale (2,918)

Condition: good (used), V-belt pulley, belt pulley, engine pulley, transmission pulley, triple pulley -V-belt pulley: 5-stage Ø 40 to 90 mm -Hole: Ø 14 mm -Number: 6x pulley available -Price: per piece -Dimensions: Ø90 x 55 mm Gsdpfx Akew U Ty Esyeuc -Weight: 0.8 kg/piece

Condition: good (used), Stage lights, spotlights, lamps, searchlights Gsdpsb A Nw Tsfx Akyouc -Ultralite Quadro-500 -Technical data: -Power supply: 15/230 V 50/60 Hz -Lamp: GY9.5 500 W -Weight: 3 kg -Average operating distance: 4-10 m -Swivel range: 45°-45° -Beam angle: Min/Max 8°-37°

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Double filter, stage filter Gedpfoxf Uukjx Akyeuc Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Condition: new, power: 90 kW (122.37 HP), Year of construction: 2026, A double rotor hammer crusher is a type of crusher in which two rotors are mounted on a single shaft, combined to form a spinning rotor. The double rotor arrangement enhances the crushing capabilities and provides a more efficient and reliable crusher design compared to single rotor crushers. Here are some key features and aspects of a double rotor hammer crusher: 1. Two Rotors: As the name suggests, the crusher has two rotors that rotate in opposite directions on a common shaft. This dual rotor configuration allows for increased impact and crushing power. 2. High Capacity: The dual rotor design enables the crusher to handle larger feed sizes and higher capacity compared to single rotor crushers. It is suitable for crushing materials with high hardness and large sizes. 3. Versatility: Double rotor hammer crushers are versatile and can be used in various applications, including the reduction of limestone, gypsum, coal, and other similar materials in the mining, cement, and building materials industries. 4. Impact Crushing: The primary mechanism of crushing in a double rotor hammer crusher is through the impact of the hammers against the material. The material is fed into the crusher, and the high-speed rotating hammers impact and shatter the particles. 5. Adjustable Gap Settings: These crushers often have adjustable gap settings between the rotors and the impact bars, allowing control over the final particle size. 6. Durability: The robust design of the double rotor hammer crusher makes it durable and capable of handling tough materials and continuous operation. 7. Reduced Wear: The dual rotor arrangement can help distribute wear more evenly across the hammers and other wear parts, potentially extending the overall lifespan of the crusher. Typical Technical Specifications While exact numbers vary by manufacturer, these are the standard ranges for industrial models: Model (Rotor Size),Max Feed Size,Output Size,Capacity (t/h),Total Motor Power 600 × 400,≤110 mm,≤3 mm,10 – 15,18.5+18.5 kW 800 × 600,≤120 mm,≤3 mm,40 – 50,45+45 kW 800 × 800,≤180 mm,≤3 mm,50 – 60,45+55 kW 1000 × 800,≤180 mm,≤3 mm,70 – 80,75+55 kW 1100 × 1000,≤200 mm,≤3 mm,70 – 100,90+110 kW Gjdpfx Akjq Nf Enoyouc 1400 × 1200,≤200 mm,≤3 mm,90 – 110,132+160 kW For more details about double stage hammer crusher, or double rotor crusher, welcome to leave us a message, our team will get back to you at the earlist.

Condition: excellent (used), The set consists of 18 elements and was developed as a step for a coordinate measuring machine measuring 6.00 m x 2.50 m. It can also be used as a mobile stage or platform. Minimum height: 0,5 m Gusdpefg Rkcsfx Akyec edge length largest element: approx. 2.50 m

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Principle of operation, machine with lifting door Gsdpfjvvuzcex Akysuc The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Condition: used, functionality: unexamined, machine/vehicle number: G&L Series SSV, Used Goulds SSV Multi-stage Booster Water Pump Manufacturer: Goulds G&L Model: G&L Series SSV Gsdex A Ax Sjpfx Akyeuc 3500 RPM 1.5 HP 360 PSI Max 230°F Max Complete with original manuals Sold per unit

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD700 can easily handle cleaning applications with high flow and pressure requirements. The pump is powered by a 6-cylinder Volvo diesel engine. There are two variants of the engine with an exhaust system according to EU Stage V / US EPA Tier 4 final or with an exhaust system according to EU Stage 2 / US EPA Tier 2. The Stage V solution is a pure SCR exhaust system. The frame is manufactured to be corrosion-resistant and is primed and painted for an attractive appearance. The frame is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully built-in solution in a trailer or container. The CD700 can be equipped with a manual gearbox, which allows the pump to be operated in several flow ranges and even manual operation in the lowest gear is possible. Similar but no Falch, Hammelmann, Kamat, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD700-1000 1000 bar 261 Lpm General specifications: ----- Guedpfshgblksx Akysc Max. Pump speed: 522 rpm Drive engine: 6 cyl. Volvo Diesel EU Stage V or EU Stage II Power of the drive motor: 522 kW Drive engine speed: 1800 rpm Diesel tank: 800 L Max. Fuel consumption: 90 L/h Dimensions and weight on base frame: 3100mm x 1700mm x 2300 mm (5850 kg)

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing device, high-pressure mounted washer on a hot-dip galvanized and painted high-quality steel frame with forklift slots, suitable for installation in commercial vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL, and 50/300XL—comparable but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, etc. The following models are available: Moses 60/200 | 60 l/min at 200 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 75/150 | 75 l/min at 150 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 30/300 | 30 l/min at 300 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses XL 75/210 | 75 l/min at 210 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 84/190 | 80 l/min at 190 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 102/150 | 102 l/min at 150 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 50/300 | 50 l/min at 300 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V DIMENSIONS / WEIGHT: Dimensions for models with 27.5 kW without water tank (LxWxH): approx. 910 x 1,220 x 1,200 mm Dimensions for models with 35.5 kW without water tank (LxWxH): approx. 1,240 x 1,310 x 1,300 mm Unladen weight without water tank: approx. 550–700 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW for standard models and ELS for XL models - Flow rate: max. 102 l/min - Operating pressure: max. 300 bar ENGINE: - Manufacturer: Yanmar - Model: 3TNV88C and 4TNV88C - Fuel: Diesel - Cooling: Water-cooled - Cylinders: 3 and 4 - Max output: 37–48 HP (27.5–35.5 kW) - Max engine speed: 3,600 rpm TRANSMISSION: Pulley and belt drive CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low oil pressure - LED indicator for clogged air filter - LED indicator for RPM monitoring - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRIC CONTROLS: - Hydraulic hose reel wind/unwind - Bypass on/off - Speed control +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage safety device to protect the high-pressure pump from running dry with automatic shut-off function. Guedpfxsf Ar Exs Akysc SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: 180° swiveling, hydraulic hose reel - Material: Stainless steel - Capacity: max. 100 m ½” - Hose: 80 m ½” high-pressure hose (included) - Hose guide: manual WATER SUPPLY HOSE REEL: - Type: manual - Material: Stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) FUEL / OIL TANK: - Fuel: approx. 13 l - Oil: approx. 13 l INCLUDED IN DELIVERY: - Multifunctional IMET radio remote control - Engine on/off - Bypass on/off - Speed control +/- - Hydraulic hose reel wind/unwind - Emergency stop button - Battery charger for radio remote control - 500, 800, or 1000 l water tank

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers pressures from 200 to 2,800 bar and flow rates from 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is constructed from hot-dip galvanized steel, ensuring long durability and corrosion resistance. For an attractive appearance, the frame is primed and then painted. The machine’s dimensions are 2,250 x 950 mm. The frame is equipped at all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side bracket for protection and storage, for example for high-pressure hoses. Comparable but not the same as Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 Lpm CD200-250 250 bar 250 Lpm CD200-1000 1000 bar 63 Lpm CD200-1380 1380 bar 42 Lpm CD200-2500 2500 bar 25 Lpm CD200-2800 2800 bar 23 Lpm OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optionally without AdBlue) Drive engine power: 149.1 kW Drive engine speed: 1,950 rpm Gusdpehgbhnjfx Akyec Tank: 135 L for skid version, 200 L for trailer version Max. fuel consumption: 18-20 L/h Dimensions and unladen weight SKID: 2,170 mm x 1,350 mm x 1,810 mm (1,785 kg) Dimensions and unladen weight TRAILER: 3,800 mm x 1,900 mm x 2,000 mm (2,500 kg) Includes standard accessories.

Year of construction: 1977, condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Guedpfxet Nhmho Akyjc

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Gedpfjxu I A Tsx Akyjuc

Condition: used, 2 units single-stage screw clamping devices with exchangeable tension element thread inserts for M 85 and M100 with hydraulic aggregat Gjdpfsthtnwjx Akysuc

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A95109671P208220001 5, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,960 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Godpfjynxh Iox Akyouc

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A98341216P215160001, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,955 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Godpfsynxhzox Akyeuc

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A95109671P208220003 5, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,960 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Godpoynxhnefx Akysuc

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A95109671Pxxx, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,960 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Gusdpfx Asynxhhokyec

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A98341216P217330003, volume flow: 213 m³/h, operating pressure: 3 bar, final pressure: 4 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 31 A, type of input current: AC, type of cooling: air, rotational speed (max.): 2,955 rpm, protection type (IP code): IP55, Used, completely overhauled pump in very good condition Guedpfx Akeynxg Rjyjc

Condition: excellent (used), functionality: fully functional, mileage: 134,600 km, power: 115 kW (156.36 HP), first registration: 03/2006, fuel type: diesel, axle configuration: 4x2, brakes: other, gearing type: mechanical, number of seats: 3, Equipment: ABS, air conditioning, airbag, differential lock, electric window regulation, truck registration, MOST PROMOSTAR.3 Promotion Mini Semi-Trailer Mercedes-Benz Sprinter 416 CDI with Semi-Trailer for Promotion/Event/Stage Use Fully wrapped in red / Original color: brilliant silver metallic 9744 Gjdpfx Akox Tuiysyouc MOST Special Vehicles MB 416cdi-P3 416 CDI 2,685 cm³ 160 HP (115 kW) 5-speed manual transmission Mini tractor unit 4x2 Differential lock ABS/ASR Air conditioning Rear view camera 3 seats Bunk/sleeping area 195/70 R15C tires Air brake system for trailer MOST Special Vehicles PROMOSTAR 3 Semi-Trailer/Trailer 2-axle Right side can be opened Event/stage with lighting, stairs, and railing Front area with separate door and access via extendable stairs Additional tent Air-braked Stereo system/TV/HiFi 12V and 220V power supply 12V battery charger 2 axles with 195/50 R13C tires

Condition: like new (used), SUITABLE FOR ALL TYPES OF PRODUCTS: green peas, green beans, spinach, carrots, okra, beans, strawberries, artichokes, sweet corn, broccoli, cauliflower, mushrooms, etc. WATER CONSUMPTION: 1.5 L water per 1 KG of product. STEAM CONSUMPTION: 1.5 L steam per 4-7 KG of product. The machine can operate in three modes: with water, with steam, or as a moisturizer (hydration). Hydration Blancher Version: In this configuration, the machine is suitable for completing the rapid rehydration process of cereals or legumes pre-started with the pre-heater. - Module 1 functions to treat the product with a water spray. - Modules 2, 4, and 6 work with steam. The temperature is controlled by a probe located in module 6, which regulates the modulating valve on the steam supply line to module 6, provided the pneumatic steam shut-off valve on module 2 is open. - Modules 3 and 5 use cold atomized water. - Module 7 is designed as a water-to-air cooler. - Module 8 works with water, and its temperature does not exceed 14ºC to lower the temperature of the product. Water Blancher Version: In this configuration, the machine operates in counter-current, meaning the product moves in the opposite direction to the cooling water flow. The first seven modules are equipped with trays with rotary water recovery filters, as well as associated level controls and water recirculation pumps. - Modules 1, 2, and 3 function as pre-blanchers for the product. - Modules 4 and 5 are specifically designed for blanching with hot water. Water is recirculated by pumps, and temperature is regulated in module 4. - Module 6 acts as the first cooling module and is fitted with a by-pass pump for recirculating warm water, which is redirected to the 2nd or 3rd module; supply to the 3rd module is regulated by a solenoid valve. - Module 7 cools the product using a water mist and removes humid air with a fan. - Finally, module 8 further cools the product by spraying water above and below the conveyor net, with all water collected in module 8’s recovery tank. Steam Blancher Version: In this variant, the machine can steam-blanch vegetables across eight modules: - Module 1 serves as a barrier to prevent steam loss. - Modules 2, 3, 4, 5, and 6 operate on steam. The temperature is maintained by a probe in module 6, controlling the modulating valve on the steam supply line, provided the pneumatic steam shut-off valves are open. - Module 7 is designed for WATER-AIR cooling. Guedpfex S H U Ssx Akyec - Module 8 is water-cooled, with the temperature not exceeding 14ºC to rapidly reduce the product temperature.

Condition: like new (used), functionality: fully functional, The Manzini TE30 Single Turbo Passer is an industrial machine designed for processing fruits and vegetables, especially in the food industry. Its main function is the separation of pulp and seeds through a centrifugal refining system, enabling the production of purees, sauces, and concentrates with a homogeneous texture and free from impurities. Features: - Refining System: Utilizes a high-speed rotor that propels the product through interchangeable sieves, allowing the final texture to be adjusted according to specific requirements. - Versatility: Suitable for a wide variety of products, including tomatoes, stone fruits, berries, and other vegetables, adapting to various production processes. - Efficiency: Engineered for continuous operation, ensuring high output with minimal maintenance. Gujdpowxw A Tefx Akyjc - Hygiene: Made entirely of stainless steel with an accessible design for easy cleaning and to meet food hygiene regulations. - Output may vary depending on the processed product.

Year of construction: 1998, condition: excellent (used), functionality: fully functional, I am selling or leasing a ship landing stage for vessels up to 270 tons with a 15-meter gangway, as well as 2 pedestrian/temporary bridges, each 12 meters in length. Length: 10 meters, width: 3 meters, height: 1.20 meters, draft approx. 0.25 meters Weight approx. 8 tons I am offering a passenger vessel pontoon 10 x 3 meters complete with all accessories and structural documentation. Pontoon 10 x 3 meters, matching 15-meter gangway, suitable compression struts including all fittings and bolts, mooring winch, chains, ropes, and tensioners. Calculations and drawings for any potentially required onshore foundations are available. Further details by phone or on site. Guodpfx Asxchz Eekysc

Condition: good (used), Year of construction: 2009, Section of Double-Stage Reverse Osmosis able to treat about 60 mc/g of product Gsdpfxotv Drlo Akyjuc

Condition: new, Year of construction: 2023, functionality: fully functional, motor manufacturer: FPT, input frequency: 50 Hz, Manufacturer: PRAMAC Sound pressure level at 7m dB(A) : 64 Continuous power: 60.3 kVA / 48.2 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Diesel engine: FPT IVECO F 34 TCA Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 3400 cm³ Intake: Turbo/NK Speed: 1500 rpm Starter: 12V Engine control: Electronic Exhaust gas recirculation, particulate filter, catalytic converter, Consumption 3/4 load: 8.32 liters Consumption at full load: 13.99 liters Generator: MeccAlte ECP32-2M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) DEEP SEA ACP Digital control DGUV TYPE B Higher-level insulation monitor Sockets with Fi type B Gusdpfx Akotq Hccsyec 1x 63A 400V /5P 1x 32A 400V /5P 1x 16A 400V /5P 1x Schuko Dimensions and weight: Length: 2,400 mm Width: 1,040 mm Height: 1,745 mm Weight, dry: 1,250 kg Fuel tank: 209 liters Sound insulation hood: RAL 9016 white Main battery switch Oil drip tray Fuel three-way valve WSP water-separating diesel filter Document holder Galvanized base frame with forklift pockets

Condition: new, Year of construction: 2025, total length: 7,500 mm, total height: 3,400 mm, total width: 3,800 mm, warranty duration: 12 months, inner dimension length: 7,000 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, 🧩 Custom-Built Solution This washing system is manufactured to order. We can customize dimensions, number of stages, heating power, pump configuration, and automation level according to your individual requirements. 🟦 Automatic 5-Stage Washing Machine – Modern Surface Preparation System Modern, fully automatic spray washing system designed for surface preparation of steel and aluminium components before powder coating or other finishing processes. The unit features separate treatment chambers, each dedicated to a specific chemical stage, ensuring optimal cleaning and pretreatment quality for every material. Equipped with top transport rails, independent liquid circuits, and precise control of temperature and process time, this washing system offers high efficiency, repeatability, and low operator involvement. Perfect solution for manufacturers seeking a reliable, energy-efficient and fully automated cleaning system for metal parts. 🔹 Technical Specifications - Working chamber dimensions: 7000 × 1500 × 2200 mm (L × W × H) - Overall dimensions: 7500 × 3800 × 3400 mm - Top transport: 3 rails 60×60×4 - Non-through chamber design - 5-stage process - Independent closed liquid circuits - Washing via pressure pumps and spray nozzles (side and top) - 4 tanks: * 2 heated and thermally insulated (for chemicals) * 2 for water / demineralized water - Tank capacity: 2500 L each - Heating power: 2 × 36 kW (electric heaters) - Total electrical power: 90 kW - 5 pumps × 3.0 kW, alternating operation - Automatic transition between washing stages Gujdpfx Akexlziheyjc - Adjustable temperature and process time - Power supply: 400 V / 50 Hz 🔸 Features and Advantages - Precise and repeatable washing of steel and aluminium components - Separate chambers and liquid circuits – no cross contamination - Fully automatic control and stage switching - Adjustable temperature and time per stage - Thermally insulated tanks for energy efficiency - Can be integrated with coating or production lines