Used Trash Compactor for sale (212)

Condition: like new (used), mileage: 195,000 km, fuel type: hybrid, Year of construction: 2019, IVECO DAILY 35-14 NP PETROL/METHANE YEAR 2019 FARID COMPACTOR WITH REAR LIFTER AND INTERNAL SHOVEL 195,000 KM TYRED SINGLE OWNER FINANCING AVAILABLE BENITO 3383844139 MICHELE 3394588233 Redpewxawyefx Aglon

Condition: like new (used), mileage: 43,000 km, Year of construction: 2020, IVECO DAILY 35-14 YEAR 2020 FUEL PETROL METHANE ENGINE 3000 KM 43000 FARID COMPACTOR WITH EPRESSA COMB TIPPING TANK SINGLE OWNER Redpfx Aevnzpwjgljn FINANCING POSSIBILITY

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Redpfx Agowg Sgcjlen Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: used, mileage: 364,441 km, power: 95 kW (129.16 HP), first registration: 07/2015, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: blue, gearing type: automatic, emission class: euro5, Year of construction: 2015, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Mercedes-Benz 313 CDi BERTSCHE lightweight refuse compactor / collection vehicle First registration: 07/2015 * Wheelbase: 3,250 mm * Rotating beacon Rodpfjxntprex Agljn * Electrically folding warning panel * Complete service history exclusively at DAIMLER Special equipment Hill start assist, additional reinforced battery, digital tachograph (download-capable), 180 A alternator, programmable special module, rotating warning beacon, acoustic reverse warning (external signal), front mudflaps, seat upholstery: artificial leather (cab), passenger double seat in cab, rear stabilizer, reinforced front stabilizer, reinforced shock absorbers, isolating relay for additional battery, 95 Ah AGM battery, reinforced front axle Further equipment: Adaptive brake light, driver's airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, 74 Ah battery, brake assist, ABS+ASR braking system, cab roof lining, lockable glove compartment, body/structure: standard flatbed, fuel tank: main tank 75 l, headlight range adjustment, truck approval, model revision, engine: 2.1 L - 95 kW CDI KAT (2143 cc), wheelbase 3250 mm, smoker package, tire repair kit with compressor, low emission according to Euro 5, driver's side seatbelt system with warning device, passenger seat adjustable in cab, steel rims 6.5x16, Assyst maintenance interval display, heat-insulating glazing, permissible total weight: 3.5 t

Condition: used, functionality: fully functional, mileage: 129,904 km, power: 106 kW (144.12 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 2,310 kg, overall weight: 3,000 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, suspension: steel, number of seats: 3, loading space volume: 5 m³, Year of construction: 2012, Equipment: ABS, air conditioning, power assisted steering, Refuse collection vehicle: Redpfx Ajx Igz Rsglen + Toyota + Dyna 100 D-4D + First registration: 04/06/2012 + 129,904 km + 4-cylinder diesel engine, 2,982 cc; 144 HP + 3-seater + 5-speed manual gearbox + Reversing camera + Airbag + Air conditioning + Electric windows + Amber beacon + Unladen weight: 2,310 kg; GVW: 3,000 kg Refuse body: + Faun / Provence Benne + M50 TH LC SAD + 5 m³ aluminium trough + Bin lift + Compactor Vehicle from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typographical mistakes excepted; subject to prior sale!

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), fuel type: diesel, overall weight: 1,880 kg, empty load weight: 1,880 kg, operation weight: 1,880 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, digging bucket width: 500 mm, Year of construction: 2025, Equipment: UVV, additional headlights, adjustable chassis, cabin, gripper hydraulics, hammer hydraulics, head guard, hydraulics, onboard computer, rubber tracks, standard shovel, SHANTUI SE18SR – PROFESSIONAL MINI EXCAVATOR WITH VARIABLE UNDERCARRIAGE, PROPORTIONAL CONTROL, AND MS01 QUICK COUPLER Vehicle No. 0111 The Shantui SE18SR is a high-performance 1.9-ton class mini excavator, ideal for landscaping, civil engineering, municipal applications, and private construction projects. Equipped with advanced technology, a robust Kubota engine, and precise hydraulics, it offers an outstanding price-performance ratio. TECHNICAL DATA Engine: Kubota D902, 16 HP, EU Stage V Operating weight: approx. 1,880 kg Variable undercarriage: 990 – 1,300 mm (ideal for narrow entrances) Articulated boom for extended reach Digging depth: approx. 2.38 m Ground reach: approx. 3.95 m Dump height: approx. 2.50 m HYDRAULICS AND OPERATION AUX 1 proportional via rocker switch on right joystick AUX 2 proportional via rocker switch on left joystick High-quality Hengli hydraulic pump – ideal for hammer, grab, compactor, and other attachments Precise pilot control as found in larger machines Standard with MS01 quick coupler for fast tool changes FEATURES MS01 quick coupler Variable undercarriage Articulated boom LED lighting Comfort operator seat Robust protective covers and premium components Redpfxjx Hx I Tj Aglsn PRICE €19,995 net €23,794 gross FINANCING / DEMONSTRATION For business customers, we offer hire purchase and leasing on attractive terms. Inspection and testing of the excavator is possible by appointment. Contact Bagger2Go now – we are happy to advise you and provide a tailored offer.

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), fuel type: diesel, color: yellow, overall weight: 1,800 kg, empty load weight: 1,800 kg, drive condition: 100 %, chain condition: 100 %, emission class: euro5, digging bucket width: 500 mm, Year of construction: 2025, operating hours: 1 h, Equipment: UVV, additional headlights, adjustable chassis, gripper hydraulics, hammer hydraulics, head guard, hydraulics, onboard computer, rubber tracks, standard shovel, SHANTUI SE17SR – COMPACT 1.8-T MINI EXCAVATOR WITH REMOVABLE CANOPY, PROPORTIONAL CONTROL & MS01 COUPLER Vehicle No. 0121 The Shantui SE17SR is a high-performance 1.8-ton class mini excavator that impresses with its compact dimensions, outstanding stability, and precise hydraulics. Featuring a removable canopy, it is ideally suited for work in confined spaces, indoors, or where height clearance is limited. Perfect for landscaping, earthmoving, as well as municipal and commercial applications. TECHNICAL DATA Engine: Kubota D902, 3-cylinder, 16 hp, EU Stage V Operating weight: approx. 1,800 kg Undercarriage width: approx. 990 mm – ideal for tight job sites Articulated boom for maximum flexibility and reach Digging depth: approx. 2.30 m Ground reach: approx. 3.90 m Dump height: approx. 2.45 m HYDRAULICS & OPERATOR COMFORT AUX 1 & AUX 2 proportional functions, directly controlled via thumbwheels on joysticks Powerful Hengli hydraulic pump – suitable for breaker, grab, compactor, and more Sensitive pilot control for precise operation, just like larger excavators MS01 coupler for fast and secure attachment changes Rodsx Hx Iaspfx Aglon FEATURES MS01 quick coupler Removable canopy for maximum flexibility Articulated boom LED work lights Comfort seat Robust and field-proven construction PRICE €18,995 net €22,604.05 gross FINANCING & INSPECTION Attractive leasing and hire purchase options available for business customers. Inspection and test run possible by appointment at any time. Contact Bagger2Go now – expert advice and a personalized quote included.

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. The offer concerns the Zentex PPH5 waste paper and film baler : - Manufacturer: ZENTEX - Product condition: used - Year of manufacture : 2010,2012,2013 - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm Rodpondcxgsfx Aglsn - Weight: 360 kg - Power: 1500 w - Voltage: 400 v Net price : 1890.00 euro each year of manufact. 2010 (Product code: MTP000234) 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,420 mm, loading space length: 4,200 mm, loading space height: 600 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, Internal reference number for customer inquiries: 4-017 MAN TGM 18.320 4x2 BB WITH PAVIC 3-Way TIPPER BODY AND FASSI CRANE A vehicle suitable for landscaping and gardening, road construction, site operations, or use as a municipal vehicle! Vehicle: MAN TGM 18.320 4x2 BB Crane Tipper Cabin type CC: Compact (narrow, short, standard height) Wheelbase: 3,875 mm B3L9Ugpg3S Leaf spring suspension front/rear (also available as leaf/air at the front axle) Drive: 4x2 Tyres: FA 2x 295/80R22.5, RA 4x 295/80R22.5 Gross vehicle weight: 18,000 kg Automatic transmission MAN TipMatic 12 12 OD Diesel engine MAN D0836 LFLAP, 235 kW (320 hp), 1,250 Nm torque, Euro 6d Gearbox feature: EfficientRoll H8Xnjhfzf Cruise control Rear axle differential lock MEILLER axial pump 270/45 Tipper body operation from inside the cab Control panel MAN EasyControl, 4 functions, operable from outside with door open Trailer coupling RINGFEDER Type 4040/G150B Brake coupling: dual-line at end of frame Rsdpfoxnn T Eox Aglen Sun visor in front of windscreen Central locking with remote control MAN Media System Navigation Advanced 7 inch Online traffic for navigation functionality Smartphone integration Heated and electrically adjustable rear-view and wide-angle mirrors Air-suspended comfort driver’s seat with lumbar support, shoulder adjustment and heating Adjustable seatbelt height, driver’s seat 2 work lights on cab roof 2 halogen beacon lights on cab roof and much more. Body: 3-way tipper body, 4200x2420 mm, manufacturer PAVIC Front wall height: 800 mm Sideboard height: 600 mm 8 fully retractable lashing eyes in the load deck (4 per side) Material: Hardox 450 Support for horizontaly placing the sideboard with rubber pad (for long goods transport) Springs as sideboard lifting aids for easier opening and closing 2 lashing rings at front wall (e.g. for securing a compactor or grab bucket) Tipper with hot-dip galvanizing; sideboards and accessories fully painted with 2K truck paint in RAL 9016 Subframe galvanized and painted in RAL 9011 Left and right sides made in one piece, can be pneumatically opened on both sides via air valve from driver’s cab, openable from below all around (pendulum action), from top to bottom manually, removable central stanchions. Springs as sideboard lifting aids for easier opening and closing. Body additional equipment: Provisions in the pillars for optional retrofitting of mesh side extensions (sideboard extensions PLUS 500mm, e.g. for hedge trimmings transport) Loader crane: FASSI F195A.2.24 e-dynamic Lifting moment: 162 kNm (16.51 mt) Hydraulic four-times extension, 12.7 m E-dynamic hose equipment for 2 additional devices Slewing range: 400° Double linkage system with PROLINK (overbending knuckle boom up to 15°) Electronic overload shutdown device with FX 500 FASSI Stability Control FSC incl. LMB II Fassi RCS maxi radio remote control – 6 functions with 3 joysticks (2-2-2) Special stabilizers, stabilizer span 6.64 m hydraulically extendable incl. FSC Outriggers operable by radio control FL-System (Full Lift) switchable high-speed valve for hydraulic extensions LED work light Financing as well as leasing or hire-purchase is possible. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 4,200 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Internal reference number for customer inquiries: 3164 ---- MAN TGM 18.320 4x2 BB WITH PAVIC THREE-WAY TIPPER BODY AND PALFINGER CRANE An ideal vehicle for landscaping, civil engineering, construction site operations, or as a municipal utility vehicle! Vehicle: * MAN TGM 18.320 4x2 BB loader crane tipper * Cab type CC: compact (narrow, short, standard height) * Wheelbase: 3,875 mm * Suspension: leaf/leaf (front suspension available as leaf/air) * Drive: 4x2 * Front tyres: 2x 295/80R22.5, Rear tyres: 4x 295/80R22.5 * Gross vehicle weight: 18,000 kg Redexnnvtepfx Aglen * Automatic transmission: MAN TipMatic 12 12 OD * Diesel engine: MAN D0836 LFLAP, 235 kW (320 hp), 1,250 Nm torque, Euro 6d * Transmission function: EfficientRoll * Cruise control * Rear axle differential lock * MEILLER axial pump 270/45 * Control for tipper body in cabin * MAN EasyControl panel, 4 functions, operable from outside with door open * Trailer coupling: RINGFEDER type 4040/G150B * Dual-line brake connection at end of frame * Sun visor in front of windshield * Central locking with remote control * MAN Media System Navigation Advanced 7 inch * Online traffic for navigation function * Smartphone integration * Rear-view and wide-angle mirrors heated and electrically adjustable * Air-sprung comfort driver's seat with lumbar support, shoulder adaptation, and heating * Height-adjustable seatbelt on driver's seat * 2 work lights on cab roof * 2 halogen beacon lights on cab roof * much more Superstructure: * Three-way tipper body 4200 x 2420 mm, manufactured by PAVIC * Front wall height: 800 mm * Sideboard height: 600 mm * 8 fully recessed lashing rings in bed floor (4 per side) * Material: Hardox 450 * Support for horizontal placement of the sideboard with rubber pad (for transporting long loads) * Spring-assisted sideboards for easier opening and closing * 2 lashing eyes on the front wall (for securing e.g. a compactor or grapple) * Tipper with hot-dip galvanization; boards and accessories fully painted with 2K truck coating in RAL9016 * Subframe galvanized and painted in RAL9011 * Side panels each made from a single piece, can be pneumatically opened from both sides via air valve in the cab; can swing down on all sides from below (pendulum style), manually from top to bottom; center stanchions removable * Spring-assisted sideboards for easier opening and closing * Additional superstructure equipment: pre-prepared mounting points in the pillars for optional future installation of leaf racks (side wall extensions PLUS 500 mm for e.g. transport of clippings) Loader Crane: * Palfinger PK 14.501 K SLD 5 * PALFINGER SOLID truck-mounted loader crane with KTL coating * Four hydraulic extensions – reach: 11.7 m * Lifting moment: 142.4 kNm (14.5 mt) * Slewing range: 420° * Electronic overload protection PALTRONIC incl. EMERGENCY STOP and load indicator * Operating hours counter with service interval display * Scanreco radio remote control * Load and overload indicator (PALTRONIC) on remote control unit * 5 selectable operating speeds Financing, as well as leasing or hire purchase, is available. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: used, mileage: 104,487 km, power: 107 kW (145.48 HP), first registration: 08/2011, overall weight: 5,200 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro5, loading space width: 1,600 mm, loading space length: 2,050 mm, loading space height: 400 mm, Year of construction: 2011, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, parking heater, soot filter, Multicar M30 FUMO Carrier 4x4 3-way tipper, short wheelbase, 3.0L diesel engine, 107kW/145HP Euro 5 with large municipal hydraulics, air conditioning, and auxiliary heater in municipal orange RAL 2011 – Ready for immediate use! ---- First registration: 08/2011 Mileage: 104,487 km Operating hours (vehicle): 7,958 h Operating hours (hydraulics): 1,374 h Previous owner: 1 (municipal vehicle, single owner) Specifications: - Iveco engine 3.0L, 107kW/145HP, EURO 5 with DPF - 5-speed manual transmission - Gross vehicle weight: 5,200 kg (can be downgraded to 3,500 kg) - Digital tachograph - Pioneer radio with CD player - Air conditioning - Webasto auxiliary heater with timer - Electrically adjustable and heated exterior mirrors - Electric windows - 3-way tipper completely new! (Vehicle previously had refuse compactor body) - 3KH tipping cylinder module - Trailer hitch with ball coupling – 3,500 kg towing capacity - (Pintle coupling – 3,500 kg towing capacity available as a retrofit) - Switchable all-wheel drive with mechanical rear axle differential lock and low range - Large municipal hydraulics - Trailer tipping hydraulics - Yellow beacon Rodpfx Aovwhzrjglen - Lighting bar plus auxiliary work lights - Driver’s suspension seat and adjustable ISRI passenger seat - Front mounting plate for attachments with quick-change system SWV 500 - 4x winter tyres 225/75R16C - New professional snow plough for municipal use (2.0m or 2.20m width) available immediately for an additional charge ---- Immediately ready-to-drive and work-ready vehicle from first owner, in tidy and well-maintained condition! The vehicle was previously used by city cleaning services as a refuse collector with compactor body, so it was not used for winter service – no rust! Low hydraulic hours! MOT/emissions inspection, battery, and maintenance service will be renewed upon delivery! ---- Your contact for this vehicle: Daniel Seidler Phone: Mobile: (also WhatsApp) Email: Errors and changes excepted!

Condition: used, mileage: 10 km, first registration: 07/2011, Year of construction: 2011, Selling a Hagemann HG3 waste collection body with hydraulic waste compactor suitable for all Multicars with short wheelbase and similar vehicles 2x identical available year of construction 7/2011 Type HG3 Payload 1350KG Weight 990KG Capacity 3 m3 Mounted on the original ball mount of the tipper. Redpfx Ajvgpfwsglsn Good condition - ready for immediate use! Errors and modifications excepted!

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2024, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. Redsu Th D Rspfx Aglon 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Rodpfx Ageu Thkaolen Scope of delivery for the baler: 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), functionality: fully functional, fuel type: diesel, color: yellow, Year of construction: 1999, machine/vehicle number: 1012, Product Description Used mobile crusher Manufactured by KOMATSU Model BR500JG-1 SERIAL : 1012 YEAR : 1999 Max Crushing Capacity : 120-460ton/hrs Rjdpoumtg Ujfx Agljn Max feed size of Trash : 1200x850x600 mm Please contact IVAN HOW JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Year of construction: 2025, condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Rodpfewg R Rtox Aglsn

Condition: new, Year of construction: 2025, Arjes / Eggersmann Impaktor 250 EVO 2 - incl. 1 set of shafts NEW - Arjes Impaktor 250 EVO 2 with one set of shafts Rodpownpwzjfx Aglon Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight: 14,500 kg Standard engine configuration: Volvo-Penta, Stage V / 129 kW Hook lift Track chassis Overband magnet with discharge container Water spraying for less dust spreading Remote control 1 set of shafts of choice, Shafts installed and incl. quick-change cassette and breaker bars Star shafts (tires, trash, plastic) Concrete shafts (demolition waste, asphalt) Paddle shafts (green waste, wood) Optional on request: - Crushing baskets for concrete and wood - Winding fans - Finger screen, disc screen - and more…

Condition: good (used), Year of construction: 2009, operating hours: 37,500 h, functionality: fully functional, machine/vehicle number: 1653, total width: 2,000 mm, total height: 2,100 mm, total length: 3,000 mm, overall weight: 5,500 kg, Hydraulic system: - Power-regulated axial piston double pump  Maximum operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm  Motor designed as an energy-efficient motor, efficiency class EFF1  Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 liters) with additional cooling and fine filter circuit, 5µm filter unit, drive 2.2 kW - Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the supporting frame Electrical configuration: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet Rjdpfoxxk D Usx Aglen - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - with Siemens TP 177B operation and display panel  Display and modify operational states and values  Perform operations  Display error messages - Automatic start/stop via light barrier integrated in the feed hopper - All initiators with contactless switching - Gear motors and pump motor with thermal winding protection contacts Material feed: - Feed hopper with fill opening of 800 x 400 mm - Robust sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, powered by 0.55 kW drive - Feed screw with 1.5 kW drive - Feed time automatically controlled by PLC Pre-compactor: Vertically arranged, hydraulically operated. - Pre-compactor pressure adjustable via TP 177B - Dust-tight control enabled by the distance measurement system developed and patented by RUF Main compactor: Horizontally arranged, hydraulically operated. - Press pressure adjustable via TP 177B up to 300 bar - Hydraulic cylinder 350, with a pressing force up to 300 tons Press output: - Depending on settings and material, up to 600 pieces per hour (approx. 800 - 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length 70 - 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Condition: good (used), Year of construction: 2013, operating hours: 37,400 h, functionality: fully functional, machine/vehicle number: 2110, total width: 2,000 mm, total height: 2,100 mm, total length: 3,000 mm, overall weight: 5,500 kg, Hydraulic system: - Power-regulated axial piston double pump  Maximum operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm  Motor designed as an energy-efficient motor, efficiency class EFF1  Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 liters) with additional cooling and fine filter circuit, 5µm filter unit, drive 2.2 kW - Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the supporting frame Electrical configuration: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet Rsdpoxwizijfx Aglen - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - with Siemens TP 177B operation and display panel  Display and modify operational states and values  Perform operations  Display error messages - Automatic start/stop via light barrier integrated in the feed hopper - All initiators with contactless switching - Gear motors and pump motor with thermal winding protection contacts Material feed: - Feed hopper with fill opening of 800 x 400 mm - Robust sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, powered by 0.55 kW drive - Feed screw with 1.5 kW drive - Feed time automatically controlled by PLC Pre-compactor: Vertically arranged, hydraulically operated. - Pre-compactor pressure adjustable via TP 177B - Dust-tight control enabled by the distance measurement system developed and patented by RUF Main compactor: Horizontally arranged, hydraulically operated. - Press pressure adjustable via TP 177B up to 300 bar - Hydraulic cylinder 350, with a pressing force up to 300 tons Press output: - Depending on settings and material, up to 600 pieces per hour (approx. 800 - 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length 70 - 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Condition: used, Year of construction: 1990, color: green, mileage: 1,001 km, first registration: 01/1990, gearing type: other, driver cabin: other, Vehicle location: incoming / in transit Body: various roll-off containers from approx. 9 m³ to approx. 36 m³ Price depending on condition: from €1,800 net up to €2,900 net 2x 15 m³ 3x 20 m³ / 22 m³ 2x 25 m³ 7x 30 m³ 3x 36 m³ Redow S Ni Depfx Aglsn 3x 40 m³ A side loader compactor will also be included! Manufacturer cannot be determined as the type plate is missing. All information subject to change as the vehicle is in transit! Accessory specifications non-binding, changes, prior sale, and errors excepted!

Condition: new, Year of construction: 2024, Operating massive working pieces? Then this CNC laser machine would be the ideal option. The Wattsan 2030 Flat Bed is a laser cutter designed to work with large materials. There is no need for extra preparation; go right to work! This CNC laser machine has a table size of 2000x3000 mm. It also includes a trash collecting container, which will make the job much more enjoyable. Wattsan 2030 can cut materials such as cloth, plywood, cardboard, rubber, acrylic, plexiglass, and wood. Rsdpfx Asry Uf Asgljn You can give our managers a call for additional details! Wattsan 2030 Flat Bed characteristics Working area: 2000x3000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 2400 x 3750 x 800 mm Packing size: 3860 x 2540 x 1020 mm Weight: 1075 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: reconditioned (used), Year of construction: 2005, Coupling containers, 30–32 m³, suitable for screw compactors, available for right or left configuration. Used, fully functional coupling containers from €4,000, depending on condition, excluding VAT. Delivery possible. Rodpfx Ajgypd Hoglsn

Condition: excellent (used), Year of construction: 2006, Balemaster Year: 2006 Rodpfx Aordwlkoglon Type: CMG 268 Waste compactor

Condition: used, functionality: fully functional, fuel type: gasoline, overall weight: 32 kg, DGUV certified until: 03/2026, Year of construction: 2018, machine/vehicle number: 20008074, Equipment: UVV, Specifically designed for compaction of pipe collars in trenches. Other areas of application: compacting edge zones of walkways; installation of drainage systems. Due to its low weight, it is easy, flexible, and safe to operate even on slopes and in very confined spaces. Rodpfx Agoxpu Tbjlen

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, overall weight: 5,000 kg, input current: 44 A, table width: 1,200 mm, table length: 2,700 mm, The compactor is designed to compact the bottoms and tops of pallets. After one cycle one pallet is nailed. Nailing is carried out mechanically. The machine automatically takes nails from the storage bins, where they are in bulk. The pallet components are taken from the external magazines by two people . Rjdpet Tyn Ssfx Agljn The XP 1000 nailing machine is designed to produce industrial pallets in the 800-1200/1200-2600 size range . The nailing cycle is adjustable from the control panel , takes a minimum of 10 seconds . Hammer plates adjustable on the full range of hammer . Standard equipment of the nailing machine includes 16 hammers on eight plates and one set of 800/1200 pallet molds . Other molds on request for an additional fee . The performance of the machine depends on the workers and their speed in stacking the parts.