Used Traub Td 26 for sale (84)

Year of construction: 2003, condition: ready for operation (used), Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass and steel), flushing gun, connected load: 33kW, control system: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in the control cabinet, operating hours: 124,705h, with FMB TURBO 5-42XT/3200/C bar feeder magazine, chip conveyor, coolant unit and basic equipment of static and driven tool holders. An on-site inspection is possible. Blodpfx Ajy U Nq Iekaeh

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Sliding Head Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Bar stock tolerance (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Blsdpoy N A S Ujfx Akash Rapid traverse Z1 (m/min): 30 Tool carrier 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1/Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool carrier 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool drive for tool carriers 1 and 2 - Max. speed (rpm): 8,000 - Max. number of driven tools: 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Sub-spindle / Front attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 / 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool positions (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (deg): 0.001 Rear attachment, driven / fixed - Z travel, driven with work spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool positions (number): 3 Rear attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool positions (number): 4 Tool drive for rear attachment (with X4 axis) - Max. speed (rpm): 10,000 - Max. number of driven tools: 4 - Clamping diameter for drilling tools: - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant system - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure system - Fire suppression system Subject to changes and errors in technical data and specifications.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC Swiss-type Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of Manufacture: 2007 TECHNICAL DATA Spindle Head - Max. bar diameter (mm): 12.7 - Material quality (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. machining length / spindle stroke - With fixed guide bushing (mm): 130 - With rotating guide bushing (mm): 80 - With programmable guide bushing (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Turret 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Turret 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Drive for Turret 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (number): 2xG - Clamping diameter for drilling tools (mm): 0.5-7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Backworking Attachment (dragged / fixed) - Z stroke, dragged with work spindle (mm): 80 - Holder diameter for tools (mm): 20 - Tool stations (number): 3 Backworking Attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Holder diameter for tools (mm): 28 - Tool stations (number): 4 Tool Drive for Backworking Attachment (with X4 axis) - Max. speed (rpm): 10,000 - Driven tools max. (number): 4 - Clamping diameter for drilling tools - driven (mm): 0.5 - 7 - non-driven (mm): 0.5 - 10 Coolant System - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 Bledpfjy N A Atex Akaeh - Pump delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure coolant system - Fire extinguishing system Subject to changes and errors in technical data and specifications.

Condition: used, Year of construction: 2022, turning diameter over bed 254 mm spindle passage 20 mm Blodpfx Akey Nfdtoaeh turning length 120 mm Control TX8i-s total power requirement 40 kW weight of the machine ca. 5 t

Year of construction: 1995, condition: ready for operation (used), Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible. Bljdpfxsy Tx Rze Akaeh

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER Bedet E Dbyjpfx Akaelh U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 Bjdpfx Asyw H Szokaslh - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 Bedsy Ed E Ujpfx Akaslh - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1975, functionality: fully functional, 1 x Multi-spindle automatic lathe Traub A 15 with loading magazine Bodpfx Ajy R Nwyekaelh Iemca AS 325/32 + Drilling and threading unit A well-maintained, complete machine in good technical condition. The machine can be inspected while powered on, or a video can be sent.

Condition: used, Year of construction: 2005, turning diameter 5-42 mm turning length 3200 mm Bedpfxoy Nd U Ds Akajlh control Traub TX8i x-axis 50 mm z-axis 50 mm weight of the machine ca. 4000 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Description follows Bodex A Hdfjpfx Akajlh

Year of construction: 1982, condition: ready for operation (used), General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible. Blodpfjy I Adbex Akaeh

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm max. swing diameter 175 mm max. bar length 3.000 mm control System TX 8F travel -x axis 140 mm travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. Bjdpfx Ajxbtq Nekajlh The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Condition: used, Year of construction: 1997, spindle passage 80 mm max. turning diameter 460 mm Max. Turning length 1.000 mm Bedpfxoxbtpxo Akajlh control System TX 8F max. Spindle speed 2.800 U/min. CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500

Condition: used, Year of construction: 1996, spindle passage 80 mm max. turning diameter 395 mm Max. Turning length 750 mm control System TX 8H max. Spindle speed 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Bedpfx Akjxbtqvjajlh #Tags:TNA400 | TNA-400

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Bodpfx Aketrvzxsaolh Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Condition: good (used), Grinding wheel puller, cup wheel puller, double bench grinder puller, surface grinder puller, cylindrical grinder puller, dressing head, dressing head for grinding machines Bljdpfx Asd R Ikdokajh Quantity: 1 piece available -Dimensions: 325/130/H135 mm -Weight: 7.3 kg

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders Blodpfsxwdw Ejx Akaoh - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, functionality: fully functional, Traub automatic lathe Bsdpfx Akewcqv Ieaslh

Year of construction: 2022, condition: used, functionality: fully functional, TRAUB Stone Dry Saw MULTI-STONE 520 MULTI-STONE 520 — Year of manufacture 2022 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Bsdpfxey A E Nie Akaolh - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 3,750 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Blodpfx Akex A Hl Asash

Condition: ready for operation (used), Year of construction: 2013, operating hours: 55,000 h, spindle speed (max.): 8,000 rpm, overall weight: 7,000 kg, controller manufacturer: TRAUB, controller model: TX8i-s, number of axes: 7, This 7-axis TRAUB TNL 32-7 horizontal turning machine was manufactured in 2013. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this TRAUB TNL 32-7 horizontal turning machine. Contact us for more information. Additional equipment • Coolant pump 3 bar / Coolant pump 8 bar • Swarf conveyor, hinged belt type H=1000 mm • Linear encoder X-axis for revolver top/bottom • Fabric filtration for coolant: grade of filtration ca. 30-40 µm • High-pressure coolant pump 20 bar • CO2 fire fight system Kraft & Bauer Machine Benefits Technical Machine Benefits Bodpjyrd H Defx Akajlh • Max bar diameter: 32 mm • Spindle stock stroke: 305 mm • Auto bar loader: fmb lsk38-3200, max. Bar length 3200 mm • Top revolver: x/y/z/h-axis, 10 tools dual drive • Bottom revolver: x/y/z/h-axis, 9 tools same drive; counter spindle independent drive • Conveyor belt for finished parts with gripper • Machine worked only with cutting oil

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 9, This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply Bedpjx D Drcefx Akajlh • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: Connection D 150 mm for central extraction Additional equipment • None specified (no robots, bar feeder, chip conveyor, or external automation listed)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Bledpfxeyn Imys Akash Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° Bljdpfx Akjym A E Ioaoh C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chucking system Two 10-station turrets with driven tool stations Counter spindle External reference: L. Schaible