Used Traub Tns 65 D for sale (89)

Condition: good (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center - TX8 D control - Complete technical data see photos - Year of manufacture 1994 - Hydrobar bar feeder - Various driven tool holders - Tool holders - Three-jaw chuck Rbjdpfx Absyc Nnzemjt - Complete documentation Subject to errors and omissions.

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D Rodot Hwq Depfx Abmobt bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details.

Condition: used, Year of construction: 1995, Traub Type TNC 42/65 DG CNC Lathe with Traub System TX8F Control,Twin Spindle with Collet Chucks, (2) x 10 Station Turrets, Swarf Conveyor. S/No. 251 (1995). Country of Origin: Germany Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Rjdpfx Abjyfgmmomebt

Condition: good (used), Year of construction: 2012, functionality: fully functional, Description follows Rjdpfxex A Hdfe Abmebt

Condition: excellent (used), Year of construction: 1996, operating hours: 46,282 h, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,600 mm, total length: 11,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: TRAUB, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, number of slots in tool magazine: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission value at operator position: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Air humidity: max. 70% - Workpiece removal via sub-spindle - Max. sub-spindle speed: 4000 min-1 - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input and output resolution: - X/Z: 0.001 mm - C axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Largest thread pitch: 999.999 mm - Largest radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Speed override: 50…120% - Speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-functions: 3 digits - B-functions: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C AXIS): Main spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 min Sub-spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 min TOOL CARRIER 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm Rbedjwpa Ruopfx Abmet - Tool holder/tool carrier quantity: 10 (14) - Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm - Chisel cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Switching time one station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z DIRECTION): - Max. speed: 4000 min-1 - Max. clamping diameter: 65 mm - Three-phase motor steplessly programmable: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw operation: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT LUBRICATION: - Per tool carrier: 1-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTICE: Due to sporadic work, the operating hours may still change slightly.

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm max. swing diameter 175 mm max. bar length 3.000 mm control System TX 8F travel -x axis 140 mm travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Technical data of the machine will follow soon. We ask for your understanding ! Rbedpjxbtq Njfx Abmst - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Condition: ready for operation (used), Year of construction: 1996, operating hours: 38,433 h, functionality: fully functional, machine/vehicle number: 489, bar diameter (max.): 65 mm, controller model: TRAUB TX8F, bar length: 3,000 mm, number of axes: 7, Equipment: bar feeder, chip conveyor, CNC automatic lathe with seven axes as well as main and counter spindle! TECHNICAL DETAILS Axes and spindles Number of axes: 7 Main spindle: present Counter spindle: present Number of turrets: 2 C-axes: 2 Y-axis: 1 Control: TRAUB TX8F MACHINE DETAILS Operating hours: 38,433 hours EQUIPMENT Bar loading magazine Stamag DN61 (bar diameter 65 mm, bar length 3 m) Coolant system Parts discharge Rsdpfew Uiktox Abmsbt Chip conveyor Air filter

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Rbodpfxjv Scrho Abmst

Year of construction: 2015, condition: ready for operation (used), A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible. Rbjdpfx Absv Scrbemst

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Rjdpfxju Eug Io Abmebt With lots of accessories.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Traub CNC Lathe TNC65DGY, TX8H, 2001 Rsdswi Izhspfx Abmjbt • 2x 10-station turrets with VDI30 rotating tool drive • C-axis on main/counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts list, circuit diagram, ATC optics Very good condition. Can be viewed under power. The machine's geometry has been checked and corrected/adjusted.

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) Rsdpfxoq Npqmo Abmjbt 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Rbodpfxsx Sw Ics Abmst Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm Rodpfx Abjwp D Nbemebt z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. * Rsdpfsu Ix N Ssx Abmjbt

Condition: used, Year of construction: 2003, max. bar material dia. 65 mm max. bar length 3.000 mm control System TX 8H CNC lathe | TRAUB - TNC 65 equipped with bar loader . The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Rjdpoxbtp Ejfx Abmjbt Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 12 - Number of turrets : 3 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 24 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 175 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 28 [kW] - Spindle speeds : 7.000 [rpm] - Max. bar diameter : 42 [mm] Redpfx Aouhadzobmjbt - C axis indexing precision : 0,001 [°] - Travel : 700 [mm] UPPER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] LOWER LEFT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] LOWER RIGHT TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 175 / 650 [mm] - Y stroke : +/- 40 [mm] - Tool type : VDI 30 - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 95 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.450 x 2.318 [mm] - Machine height : 2.258 [mm] - Machine weight : 10.000 [kg] MACHINE HOURS - Number of working hours : 50000 [h] EQUIPMENT - CNC : Traub TX8i-S - Electronic handwheel - 3 colors status lamp - Coolant tank : RESY * with high-pressure pump * with paper filtering unit - Chips conveyor - Parts catcher - Parts conveying strip - Number of turning tool holders : 6 - Number of fixed tool holders : 33 - Collet chuck : 2 HAINBUCH

Year of construction: 2001, condition: good (used), bar diameter min. 18mm / max. 63mm Redpfei Dagcex Abmsbt bar lenght min. 1000mm / max. 4200mm

Condition: used, Year of construction: 1990, Numerous tool holders Power chuck 12-position turret Machine type: CNC lathe Year of manufacture: 1990 Control: Traub TX 8 F Turning diameter: 480 mm Turning length: 800 mm Spindle bore: 65 mm Spindle speed: 40 - 4000 rpm Redpfxeyc Hgbo Abmsbt Weight: approx. 5000 kg Dimensions (W x D x H): approx. 2950 x 1990 x 2000 mm Condition: used

Condition: ready for operation (used), A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible. Redpoyfhmhofx Abmjbt

Condition: used, Year of construction: 1988, Technical details: Rsdpfeu Rqabex Abmobt turning diameter over bed: 360 mm turning dia. over face-slide: 160 mm turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Condition: excellent (used), Year of construction: 1991, Multi-spindle & bar turning machines TRAUB TD 26 1991 * Spindle power 2.2 kW * Number of spindles 4 * Spindle bore 26 mm Rbsdswc Aqwopfx Abmet * Speeds 1.18 > 4750 mm * Total power 3.2 kW * Length L - R 1800 mm * Width V - H 1000 mm * Height 1400 mm * Weight 800 kg * Tool changer 6 tools Additional information * Max. round: 26 mm, max. square: 18 mm, max. hexagon: 22 mm * * Bar loader available

Condition: good (used), Year of construction: 1999, operating hours: 110,000 h, functionality: fully functional, spindle bore: 42 mm, Description follows Rbjdpfx Aox A Ha Hebmot

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T Rbjdpfxsx Ed A Do Abmot - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: good (used), Year of construction: 1989, 1 x automatic lathe Traub Rodpfx Abevga A Tomsbt TD 16 year of manufacture: 1989 with hydraulic single-bar feed LNS Hydrobar 3.16 -HS 4.4 Year of construction: 1989 Equipment: 6-fold star turret Material quick clamping. Long turning device Central lubrication Vogel Accessories: see photos The machine can be inspected under power.