Automatic bar machine

TRAUB TNC42 DG

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm max. swing diameter 175 mm max. bar length 3.000 mm Ffodsxbtq Nspfx Afnsu control System TX 8F travel -x axis 140 mm travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Condition: excellent (used), Year of construction: 2001, operating hours: 47,600 h, machine/vehicle number: 325, System: TX8H Spindle passage: 80 mm Turning length max: 750mm Turning diameter: 340mm Fedpfx Aoh Dzqlofnjfu Power: 22kw Number of tool holders: 12 Shaft diameter: 40 Powered tools in all positions X axis Z axis C axis Automatic tailstock chip conveyor

Condition: used, Year of construction: 1995, Traub Type TNC 42/65 DG CNC Lathe with Traub System TX8F Control,Twin Spindle with Collet Chucks, (2) x 10 Station Turrets, Swarf Conveyor. S/No. 251 (1995). Country of Origin: Germany Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fodpfxoyfgmms Afnefu

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER Ffedpsup Hwxefx Afnsu - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 50223 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t Ffsdpfxjwbi A Do Afnju - Operating hours: 48,690 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING Ffedpfxouq Iwps Afnou

Condition: new, High quality benchtop bending machine with a top equipment. FLOTT TB 13 Plus MK II (212503) FLOTT TB 13 Plus B 16 (212500) Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - EMERGENCY STOP button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with Schuko plug - 3 years warranty for one-shift operation Technical data: Drilling depth (mm): 60 Tapping capacity (depending on pitch): M10 Speed display: Digital Fedpfxei Hpyqs Afnefu Drilling depth display: Digital Drilling depth stop: Stop ring (form fit) Feed (mm/rev): by hand Table height adjustment: with toothed rack motor three-phase current - frequency controlled, mains connection 230 V (kW): 0,54 continuous/normal drilling capacity (mm): 13/15 (in E335/ST60) throat depth (mm): 220 column diameter (mm): 70 Usable working surface (W x L) (mm): 300 x 250 Spindle/working surface (mm): 85-370 (table), 420 (foot) T-slot size (arm), distance (mm), dimension width (mm): Cross grooves, number 2, 14/26 machine dimension without packing (mm): 400 x 520 x 850 machine dimension with packing (mm): 452 x 700 x 1.130 Weight (kg): 62 Note: All other models are available on request.

Condition: used, Year of construction: 2010, USED MACHINING CENTER HERMLE MODEL C 40 UP Year of manufacture: 2010 Control unit: HEIDENHAIN iTNC 530 Travel: X 850 mm, Y 700 mm, Z 500 mm Linear axes (X-Y-Z): Dynamic version Milling spindle: 18,000 rpm Spindle taper: HSK-A63 Tool magazine with 38 positions NC tilting rotary table, diameter 800 mm for PALLET CHANGER C axis with torque motor, A axis with tandem drive includes pallet clamping system, hydraulic and pneumatic extension, Ffsdpfx Aexvq Iusfnsu bed wash, automatic opening/closing cabin door (Load capacity 1,400 kg) Pallet changer device PW 800 for SRT 800 PW - 630 x 630 Load capacity: 800 kg Rotating load/unload station for PW 800 Additional control for clamping system operation for PW 800 Internal coolant supply 80 bar including: Paper filter, Standard coolant system, Linear scale pressurization, bed wash Chip conveyor Air blow cleaning device Manually opening/closing cabin cover Polycarbonate safety windows HEIDENHAIN thermal compensation Electronic handwheel Renishaw touch probe incl. pre-arrangement Laser system – Blum Chip cleaning gun Signal lamp 2 pallets 630x630 mm Additional articulated arm

Condition: good (used), Year of construction: 2004, operating hours: 77,711 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 77,711 h | Spindle ON: 16,294 h - Spindle HSK-A63, 10,000 rpm - 32 tool positions - Rotary table SRT 280 mm with integrated clamping system SK50 (can be closed off if not needed or converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun Fjdpfx Ajxcp R Isfnjfu - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool positions plus 87 additional positions (ZM87) - Thermal compensation - BLUM tool measurement (probe on machine column) - Renishaw measuring probe - Chip container - Status beacon The machine has been thoroughly inspected; a geometry protocol and circularity test measurements are available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: good (used), Year of construction: 2008, HWACHEON HI- TECH 200B CNC LATHE MAKE HWACHEON, MADE IN SOUTH KOREA MODEL HI TECH 200B YEAR 2008 CONTROL FANUC O i-TB SWING OVER BED 500.0 mm Fjdpfst Urwhox Afnefu SWING OVER SADDLE 390.0 mm MAX MACHINING DIA 350.0 mm MAX WORK LENGTH 400.0 mm TRAVERSES (XZ) X AXIS: 195.0 mm Z AXIS: 430.0 mm CHUCK DIA 250.0 mm MAX. SPINDLE SPEED 3,500 RPM SPINDLE NOSE A2-8 SPINDLE BAR CAPACITY 76 mm TURRET 12 STATIONS MACHINE WEIGHT 4,500 kgs PLUS RENISHAW PROBE PARTS CATCHER TAILSTOCK SWARF CONVEYOR MACHINE MANUALS MACHINE IN GOOD WORKING ORDER