Used Traub Tvc 200 for sale (84)

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device Bedpfx Asu Idn Hspbelh - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: used, functionality: fully functional, Traub automatic lathe Bedpfxjwcqv Ie Apbjlh

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders Bodpfx Apsq Npqmobslh 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 124,706 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, controller manufacturer: TRAUB, controller model: TX8i (64-bit), number of axes: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details. TECHNICAL DATA • MDE Interface: Yes • Tool Monitoring: Yes • Rigid Tapping: Yes (without compensation chuck) • Main Spindle Bore: 36 mm • Main Spindle Drive Power: AC 6.7 / 10.7 kW • Top Turret Stroke X/Z: 50 / 100 mm • Rear Attachment Stroke X: 73 mm • Rear Attachment Stroke Y: ±50 mm • Main Spindle C-Axis: Yes • Hainbuch Change Parts: Yes • Hainbuch Setup Aid Base Body: Yes • Hainbuch Manual Change Device: Yes • Counter Spindle: Motor Spindle • Counter Spindle C-Axis: Yes • Counter Clamping Pressure Device: Yes • Workpiece Ejection Device: Yes • Hainbuch Axfix Chuck: Yes • Upper Tool Carrier: Yes • Electronic Gearbox: Yes • X3 Cross Axis for Front Unit: Yes • Front Unit: 5-position • Driven Tools on Front Unit: Yes • Cut-Off Side Machining Station: Yes • Driven Tools on Cut-Off Side Station: Yes • Workpiece Unloading Device: Gripper • Coolant Tank Capacity: 230 l • Coolant Pressure: 7 bar • Coolant Flow Rate: 50 l/min • Internal Coolant Supply: 30 bar • High Pressure Coolant: 120 bar (front and rear machining station) • Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter • Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel • Wash Gun: Yes • Connected Load: 22 kW • Maximum Bar Length: 3 m • Maximum Bar Diameter: 36 mm • Operating Voltage: 400 V, 3~, 50 Hz • Control Voltage: 24 V AC • Valve Voltage: 24 V DC • Clutch Voltage: 24 V DC • Total Installed Power: 33 kW • Total Rated Current: 60 A ADDITIONAL EQUIPMENT OPTIONAL • FMB turbo 5-42 XT / 3200"C" Bar Feeder • Bar Feeder Year: 2003 • Hinged Belt Chip Conveyor • Chip Conveyor Discharge Height: 950 mm • Guide Tubes D25, D36 • Running Workpiece Stop, Shank 16 × 16 mm • Brankamp CMS 100 Collision Monitoring Bodpfx Asza Ucxspbjlh Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 Bsdpfjwp D Nbox Apbolh x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm turning diameter over bed slide: 660 spindle bore: 65 mm spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m Bodpfx Asw I R Ndspbelh with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment *

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system Blodpfxjzacwds Apbeh - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Bjdpfx Asu Eug Ijpbolh With lots of accessories.

Condition: good (used), Internal item no.: 25088 Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 Bjdpfx Asxu Dcvspbslh The tool was used on a Traub TNL18 Very well-maintained condition!

Condition: good (used), Internal item no.: 25089 Tool holder Thread whirling holder Index / Traub No.: W7045012B Very well maintained condition! The holder was used on a Traub TNL18. Bledpfx Aoxu Uu Aopbeh

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm turning dia. over face-slide: 160 mm turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min Bsdpfxju Rqabs Apbolh feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. Bedpfxeu Ix N So Apbelh *

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Bsdpszaud Asfx Apbelh Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 87,094 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 450 mm, spindle motor power: 18,500 W, total height: 1,917 mm, total width: 2,076 mm, overall weight: 5,200 kg, controller manufacturer: TRAUB, controller model: TX8i, product length (max.): 4,354 mm, number of slots in tool magazine: 10, number of axes: 7, This 7-axis TRAUB TNC 65 DGY was manufactured in 2009. It features a powerful tool drive turret with a speed of 4000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics, equipped with a C-axis for numerically controlled turning and positioning. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC 65 DGY horizontal turning machine we have for sale. Contact us for further details. • Control system: TX8i with 64-bit RISC high-performance processor and additional PLC high-performance processor, integrated PC• TX8i control with TFT color flat screen and electronic handwheel• Multi-range transformer for 460V / 400V / 380V / 220V / 200V, 50 Hz• Machine operating voltage: 400V 50 Hz• Accessories operating voltage: 230V 50 Hz• Control voltage: 24V DC• Designed for machining metals and plastics with defined cutting edge• Maximum turning length: 450 mm• Main spindle bore: 65 mm• Spindle through-hole: 65 mm• Maximum clamping diameter depending on collet system: 60 mm• Front bearing diameter: 66 mm• Standard collet: DIN 6343• Maximum clamping diameter: 65 mm• Main spindle torque: 230 Nm• Main spindle C-axis numerically controlled• X-axis rapid traverse/feed speed: 7.5 m/min• X-axis feed force at 100% duty cycle: 5000 N• X-axis ball screw: 32×5 mm• Z-axis rapid traverse/feed speed: 10 m/min• Z-axis feed force at 100% duty cycle: 8000 N• Z-axis ball screw: 32×10 mm• Y-axis rapid traverse/feed speed: 3 m/min• Y-axis travel: ±35 mm• Y-axis feed force at 100% duty cycle: 8000 N• Y-axis ball screw: 25×5 mm• Tool stations: 10 (14 optional)• Tool holder size: Ø30×55 mm• Alternative tool holder size: Ø25×48 mm• Tool shank size: 20×20 mm• Alternative tool shank size: 16×16 mm• Counter spindle maximum speed: 4000 rpm• Counter spindle maximum clamping diameter: 65 mm• Counter spindle power: 11 kW• Counter spindle constant power range: 1:8• Counter spindle torque: 210 Nm• Counter spindle rapid traverse/feed speed: 10 m/min• Counter spindle travel: 520 mm• Counter spindle feed force at 100% duty cycle: 6000 N• Counter spindle ball screw: 32×20 mm• Counter spindle C-axis with speed-synchronous control• Tool drive turret 1: 3.1 kW, 4000 rpm• Tool drive turret 2: 3.1 kW, 4000 rpm• Tool monitoring TX8i with wear and breakage control via axis motor monitoring• Thread cutting without compensating chuck• TRAUB Polyform software for milling programming with C-axis (front, longitudinal, cylindrical surface)• Ethernet network connection preparation with RJ45 interface• Z/V-axis counter spindle software with defined end position (face transfer)• Hydraulic system pressure: 70 bar• Hydraulic tank capacity: 70 l• Coolant pump pressure: 12 bar• Coolant tank capacity with chip conveyor: 435 l• Electrical connected load: 39 kW• Machine weight with counter spindle and electrical cabinet: 5200 kg• Noise level: 73 dB(A)• Permissible ambient temperature: 5–40 °C• Maximum relative humidity at 40 °C: 50 %• Work area turret section: 450 mm• Work area to counter spindle: 520 mm• Total work area: 728 mm• Minimum distance F to counter spindle contour: 127 mm• The machine has a Y-axis on turret 1, but not on turret 2 Additional equipment Blsdpfxsy Sg Nie Apbsh

Condition: ready for operation (used), Year of construction: 2000, operating hours: 116,688 h, spindle speed (max.): 5,600 rpm, travel distance X-axis: 375 mm, travel distance Z-axis: 450 mm, spindle motor power: 11,000 W, total height: 1,800 mm, overall weight: 3,500 kg, controller manufacturer: TRAUB, controller model: TX8H, product length (max.): 2,700 mm, number of axes: 3, This 3-axis TRAUB TNA 300 horizontal turning machine was manufactured in 2000. It features a spindle diameter of 65 mm and includes a high-pressure coolant system, driven tools with 4 kW power, and an automatic bar change system. The machine is equipped with a chip conveyor and tool monitoring systems for enhanced efficiency. If you are looking to get high-quality turning capabilities, consider the TRAUB TNA 300 machine we have for sale. Contact us for further details. • Spindle bore / machine capacity: 65 mm • Installed 185E collet system capacity: max. 60 mm clamping diameter • Machine version: without tailstock • Basic configuration: included • Hydraulic hollow clamping cylinder: included Bjdey Sg Dgepfx Apbolh • High-pressure coolant system: 12 bar / 3 bar • Control system: TX8H, 32-bit technology; processor latest generation (at time of build); parameter data on diskette • Axes/functions: • C-axis: included (numerically controlled spindle positioning and turning axis) • Y-axis: not included • Driven tools: included; power 4 kW • Monitoring and safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive shutdown after material end: selectable via parameter • Error message via parameter: selectable • Guideway cover: included • Workholding: • Collet clamping system: ROHM • Collet system compatibility: • DIN 6343 size 48, max diameter 42 mm • Rubberflex series 52 compatible • Rubberflex series 36 compatible • Fahrion collet FM 1149 MB compatible • Fahrion collet FM 1148 MB compatible • Electrical: • Electrical system according to: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Accessory voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional equipment • Chip conveyor: included • Workpiece removal device: included; via conveyor, left side discharge • Bar feeder preparation: included • Bar feeder: TRAUB DNH 61-3000 (automatic) • Feeding: telescopic pusher system • Bar shapes: round / hexagonal / square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar change: included • Residual piece removal: forward • Central adjustment of bar diameter: included • Stepless feed force adjustment: included • Central magazine adjustment: included • No guide channel change required • No clamping sleeve change required • Short remnant pieces possible • Transverse loading system • Transport weight: approx. 2100 kg Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 1993, condition: used, machine/vehicle number: 156, CNC control Traub System TX8 F, with 1 turret with 6 tool stations and 1 turret with 6 tool stations, driven tools, bar capacity 30 mm, equipped with fleece filter system, coolant device and automatic bar loading magazine. Bodpfx Apey Sqkwobslh

Condition: used, Year of construction: 2008, machine/vehicle number: 7041245, CNC control Traub system TX8 I, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8000 rpm, 2 turrets each with 10 tool stations, driven tools, coolant system, chip conveyor KNOLL 240 S-1/50, filtration system/compact band filter RESY Bsdpfsy Sqg Ejx Apbjlh

Condition: used, Year of construction: 2004, machine/vehicle number: 1057, CNC control TRAUB System TX 8 H, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8,000 rpm, 2 turrets each with 10 tool stations, driven tools, KNOLL RP band filter system, chip conveyor. Bodpfjy Sqhiox Apbelh

Condition: used, Year of construction: 2007, machine/vehicle number: 7041219, CNC control Traub System TX8 I, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8000 rpm, 2 turrets each with 10 tool stations, driven tools, chip conveyor KNOLL 240 S-1/50, filtration system/compact band filter RESY KBF 452/500 Bjdpfx Apoy Sqg Sebelh

Condition: used, Year of construction: 1992, machine/vehicle number: 690, CNC control Traub system TX8 D, with 1 turret with 14 tool stations and 1 turret with 9 tool stations, driven tools, max. turning length approx. 1000 mm, bar capacity 80 mm, power 73 kW, with fleece filtration system and chip conveyor. Bsdpfey Sqimox Apbslh

Condition: used, Year of construction: 2007, machine/vehicle number: 7041201, CNC control Traub system TX8 I, bar capacity 42 mm, max. turning length 450 mm, max. spindle speed 8,000 rpm, 2 turrets with 10 tool stations each, driven tools, chip conveyor KNOLL 240 S-1/50, filtration system/compact band filter RESY KBF 452 Blsdjy Sqhcopfx Apboh

Condition: ready for operation (used), Year of construction: 1999, operating hours: 124,009 h, number of axes: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis main spindle: Yes • C-axis counter spindle: Yes • V-axis: Yes (programmable position) • Tool carriers: 2 (tool carrier I and II) • Driven tools on tool carrier I: Yes • Driven tools on tool carrier II: Yes • Number of tool stations: 10 per tool carrier • Thread cutting: Without compensating chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant system: Cleaning system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply for both turrets integrated • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Water-based coolant compatible Additional equipment Bsdpsy R Uvusfx Apbslh • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (preparation included) • Workpiece ejection device: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max clamping diameter 60 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 1993, functionality: fully functional, Traub CNC lathe TNS26DG, TX8F, year of manufacture 1993 • 2x 12-station turrets with rotating tool drive VDI25 • C-axis on main/sub spindle • 163E on main spindle, 161E on sub spindle • Chip conveyor, bar feeder DN26 • Spare parts catalog, electrical diagram, ATC optics Ex site, directly from production By arrangement, approx. 2-3 weeks after order 100% payment before loading Without any warranty. Ex location/dismantled, as inspected and tested. Subject to prior sale. Blsdsy D I Svspfx Apbeh

Year of construction: 2003, condition: ready for operation (used), Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass and steel), flushing gun, connected load: 33kW, control system: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in the control cabinet, operating hours: 124,705h, with FMB TURBO 5-42XT/3200/C bar feeder magazine, chip conveyor, coolant unit and basic equipment of static and driven tool holders. An on-site inspection is possible. Bodey U Nq Iopfx Apbslh

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Sliding Head Lathe Manufacturer: Traub Bodpfjy N A S Ujx Apbslh Machine Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Bar stock tolerance (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool carrier 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1/Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool carrier 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool drive for tool carriers 1 and 2 - Max. speed (rpm): 8,000 - Max. number of driven tools: 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Sub-spindle / Front attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 / 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool positions (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (deg): 0.001 Rear attachment, driven / fixed - Z travel, driven with work spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool positions (number): 3 Rear attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool positions (number): 4 Tool drive for rear attachment (with X4 axis) - Max. speed (rpm): 10,000 - Max. number of driven tools: 4 - Clamping diameter for drilling tools: - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant system - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure system - Fire suppression system Subject to changes and errors in technical data and specifications.