Used Traub Tna480 Tx8D for sale (102)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning machine TNA480, TX8D, year of manufacture 1990, serial number 607. Servo C-axis, reinforced rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, 3-jaw chuck KNCS315, ID090090. Main drive with 2 gear stages. A8 spindle with hollow clamping cylinder Röhm SZS 86/169, ID 416530. Additional accessories, tool holders, chucks available upon request. Includes ATC optics, spare parts catalog, wiring diagram, tool holder catalog. Very good condition, operational, can be inspected while running. Machine geometry has been checked and corrected/adjusted, and a test run has been performed. Bwodpfxjz Eqh De Anpow Scraper + belt + drive sprocket, belt checked and replaced, maintenance performed at 4000 hours. Technically very good condition, guideways, spindle bearings in very good condition. Videos available upon request.

Year of construction: 2005, condition: good (used), 7-position tool holder for CNC lathes Manufacturer: TRAUB, Model TNA 480, tool holder size VDI 40. Also compatible with SAUTER tool turrets with VDI 40 mounting. Bwedpfxehwnfke Anpsw 7-position horizontal tool holder, positions no. 3/4/5/6/7/8/9 for drilling and milling, price per piece: 550,- € 2-position horizontal tool holder, positions no. 1 and 2 for tapping, price per piece: 600,- € 1 NC drilling chuck VDI 40, clamping range 1-13 mm, price: 100,- € 1 NC drilling chuck VDI 40, clamping range 2.5-16 mm, price: 150,- €

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Bsdpfx Anox A Hl Aopsww

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine Bodpfjzpf I Asx Anpsww -Tailstock -Various powered tool holders -Three-jaw chuck -Tool holder -Complete documentation Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC lathe TNS60, TX8D, year of manufacture 1990, serial no. 1403 Bodpfx Aez Eqmtsnpoww C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, through-hole chuck cylinder, collet chuck 185E, AMK drive. Very good condition, fully functional. Machine geometry has been checked and corrected/adjusted. The machine was completely overhauled in 2019 and has had few operating hours since then; guide rails, spindle bearing, and ball screws are in top condition. Scrapers and belts have been checked and replaced. The machine can be inspected while powered on.

Condition: used, Year of construction: 2017, operating hours: 13,700 h, machine/vehicle number: IntNr2316661, A CNC vertical turning center, TRAUB TNL 12, manufactured in 2017, equipped with a TRAUB TX8i-s control system and comprehensive peripherals, is for sale. The machine comes from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General technical data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Model: TNL 12 Year of manufacture: 2017 Control system: TRAUB SYSTEM TX8i-s CNC axes: 11 axes Max. bar diameter: 13 mm Max. turning length: 130 mm Operating hours (recorded) Control system ON: 22,868 h Production time: 13,620 h Spindle running time: 9,945 h Main spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Counter spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Tool carrier / Machining Tool turret: 2 turrets Tool stations: 6 stations each Powered tools: on all turret stations Tool drive (turret): Up to 8,000 rpm Tool drive power: 1.5 kW (25% duty cycle) Front machining unit: 4 tool stations Rear machining unit: 4 tool stations Simultaneous machining: Depends on the number of tool carriers Equipment and peripherals Bedpfxj Ahfare Anpsww Bar feeder: FMB minimag 20 CO₂ extinguishing system: Kraft & Bauer FB 703 Coolant treatment: RESY compact belt filter system Oil mist extraction: NOVA, mounted on the machine Electrical connection data Voltage: 400 V / 50 Hz / 3-phase Connected power: 16 kW / 19 kVA Rated current: 27 A The machine can be inspected by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Year of construction: 2003, condition: used, Max. bar capacity: 13mm, max. turning length: 130mm, connected load: 18kW, control system: TRAUB SYSTEM TX8i-s, including FMB Minimag 3200 bar feeder. Machine is fully functional, no known technical defects. An on-site inspection is possible. Bwode Ahq Raspfx Anpsw

Condition: used, Year of construction: 2002, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Machine Type: CNC short-stroke turning machine Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2002 Loading Magazine Bwjdpo Aay Aaefx Anpjw Manufacturer: FMB Model: TURBO 5-42XT/4200/C Year of Manufacture: 2002 EQUIPMENT Knoll chip conveyor Compact belt filter for high pressure Parts conveyor belt Holder Driven tools Collets Various material reducers for the loading magazine Accessories required for operation

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr2316671, A CNC vertical turning centre, TRAUB TNL 12, manufactured in 2005, equipped with a TRAUB TX8i-s control system and extensive peripherals, is for sale. This machine originates from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General Technical Data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Model: TNL 12 Year of Manufacture: 2005 Control System: TRAUB SYSTEM TX8i-s CNC Axes: 11 axes Bsdj Ahfavjpfx Anpsww Max. Bar Diameter: 13 mm Max. Turning Length: 130 mm Operating Hours (Recorded) Control ON: 38,120 h Production Time: 22,345 h Spindle Run Time: 15,543 h Main Spindle Max. Speed: 12,000 rpm Drive Power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-Axis Resolution: 0.001° Counter Spindle Max. Speed: 12,000 rpm Drive Power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-Axis Resolution: 0.001° Tool Carrier / Machining Tool Turret: 2 turrets Tool Stations: 6 stations each Powered Tools: on all turret stations Tool Drive (Turret): Up to 8,000 rpm Drive Power (Tool Drive): 1.5 kW (25% duty cycle) Front Machining Unit: 4 tool stations Rear Machining Unit: 4 tool stations Simultaneous Machining: Depends on the number of tool carriers Equipment and Peripherals Bar Feeder Magazine: FMB minimag 20 CO₂ Extinguishing System: Kraft & Bauer FB 703 Coolant Treatment: RESY compact belt filter system Oil Mist Extraction: NOVA, mounted on the machine Electrical Connection Values Voltage: 400 V / 50 Hz / 3-phase Connected Load: 16 kW / 19 kVA Rated Current: 27 A The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 Bedj Afg Tcjpfx Anpsww ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: used, Year of construction: 1992, operating hours: 27,221 h, functionality: fully functional, machine/vehicle number: 474, turning diameter over cross slide: 240 mm, turning length: 800 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,005 mm, total length: 2,953 mm, total width: 1,990 mm, type of input current: three-phase, overall weight: 4,300 kg, Last maintenance performed by INDEX-Werke GmbH & Co.KG on September 29, 2025. Chuck diameter: 200 mm Main drive: 30 kW Speed range: 40-4000 rpm Spindle bore: 65 mm Turning diameter over cross slide: 240 mm Turning length: 800 mm Cross slide with turret Bwsdpfx Aez Ng I Asnpew Tool positions: 12 Slide travel, cross/longitudinal: 220/850 Powered tools: 6 Speed at the drive wheel: 4000 rpm Tailstock Arbor diameter / Arbor travel: 85 / 140 Mount according to DIN 228: MK5 Total power: 52 kW Machine weight: 4300 kg Dimensions (L/W/H): 2953/1990/2005 Technical data subject to change without notice. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Traub Type: M125 Year of Manufacture: 1973 Machine Type: Turning Automaton MACHINE DETAILS Electrical Data Operating Voltage: 83 V Frequency: 50 Hz Dimensions and Weight Length: 1,500 mm Width: 1,000 mm Bwjdo Ad Ik Hepfx Anpsw Height: 1,600 mm Weight: 800 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Bedpfx Anez Erdtepsww Counter spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Tooling system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Rear machining station (5 tools), without drive Bar loader: IEMCA BOSS 432/44

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° Bedpo Ac Uu Nsfx Anpjww rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 7, This 7-axis TRAUB TNL 32 7B swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 7Bswiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm Bwsdpfx Asx D Drconpsw • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system not included, it is currently connected to a central one • Extraction: Connection D 150 mm for central extraction Additional equipment • bar feeder • 7B Version Technical Specification Counter Spindle No

Condition: used, Year of construction: 2016, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2016 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):35 kW Torque (max.):120 Nm Barcapacity:65 mm Workpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motor spindle, integrated in tool carrier II Speed:7.000 rpm :Power (max.):12 kW Torque (max.):22,5 Nm Chuck:Hainbuch Spanntop Kombi Axfix Gr. 42 Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Toolcarrier II (X/Y/Z): Technology:Turret with 9 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Backworking attachment: Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron) Bwedpfez A Nz Dsx Anpew Driven Tools:5 stations Tooldrive:12.000 U/min, 6,7 kW, 5,3 Nm Equipment/Accessory: Positionsensor:Direct Scales in X (up/down) Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbaletfilter and High-pressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Wasteheatmanagement:Interface for external chiller prepared Rawmaterialfeed:Barloader, FMB SL 80 V Finished part removal:Unloading device (NC-controlled) with coneyor belt Fireextinguishing unit:Kraft + Bauer Oilmistseparation:Electrostatic extraction LTA AC 3001 Further Accessory:Misc. used static and driven Toolholder

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Bwjdpozkvkqofx Anpsw

Condition: used, Year of construction: 2007, turning diameter 275 mm Bedpfx Anozwg Ndjpsww turning length 900 mm control TRAUB TX8i-s spindle passage 65 mm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min x-axis 175 mm z-axis 650/975 mm y-axis +/- 40 mm rapid traverse X/Y/Z 20 / 40 / 20 m/min feed capacity X/Y/Z 5,5 / 5,5 / 10 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,50 kW max. torque at 25% load 17,50 Nm tool taper DIN 69880 Ø30x55 spindle diameter in front bearing 110 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm Bwodju Ix N Sopfx Anpjw cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Condition: used, Year of construction: 2007, spindle passage 65 mm Bodpozyvb Ujfx Anpeww Max. Turning length 450 mm Spindle diameter in forward position 110 mm control System - TX8 I number of spindle speeds 4.000 U/min CNC lathe | TRAUB - TNC 42/65 equipped with bar loader. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 | TNC 42/65

Condition: good (used), Year of construction: 1999, operating hours: 110,000 h, functionality: fully functional, spindle bore: 42 mm, Description follows Bwsdpfxex A Ha Ho Anpsw

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2011 Bwedpozr Dd Usfx Anpjw Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier II (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier III (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and Highpressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Rawmaterialfeed:Barlaoder, FMB SL 80S Finished part removal:Unloading device (NC-controlled) with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. used static Toolholder

Condition: good (used), functionality: fully functional, 1 x Multi-spindle lathe Manufacturer: Traub Model: TK 42 Year of manufacture: 1986 With tailstock Spindle gearhead Chip conveyor Part conveyor The machine can be inspected while powered on. For an additional charge, a bar feeder can be supplied. Bwodpezz Iylofx Anpsw

Condition: good (used), Year of construction: 2013, TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Design allows for conversion between long and short turning Controlled axes: 9 Tool holder WRV on top, X/Y/Z dual drive Counter spindle with WRV on the bottom, separate drive Rear unit with drive Rated voltage 400 V, 3~, N, PE · 50 Hz Connection power 28 kVA, pre-fuse 63 A Recommended supply line: 16 mm² up to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Bjdpfx Aezzahzsnpjww Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, design type 3 small - Coolant lubrication with cutting oil — internal feed 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment system with strip filter (ELBARON) - Mist extraction and fume separator - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Workpiece removal with linear unit (part gripper) - Incl. various clamping jaws - Linear measuring system in the X-axes - TRAUB tool monitoring and WinFlexIPS programming - Bar loader FMB turbo 3-36 for bars up to 3,200 mm, with synchronous and displacement device - Chip conveyor, hinged belt - Color: Dust gray RAL 7037 Machine operating time approx. 30,600 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Year of construction: 1968, condition: used, Offered is a cam-controlled automatic lathe with bar feeder. Main spindle bore: Ø 60mm. Spindle speed: 160-1600rpm. Speed steps: 11. Distance between centers: 340mm. Center height: 125mm. Equipped with mechanical collet and bar feeder. Inspection possible by appointment. Bsds Aba Swjpfx Anpjww