Used Trumabend for sale (45)

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 38,990 h, Hydraulic Press Brake Manufacturer: TRUMPF Model: TrumaBend V170 Year: 2001 Technical Details Manufacturer: TRUMPF Model: TrumaBend V170 Year of manufacture: 2001 Operating hours: 38,990 h Pressing force: 170 t Bending length: 4080 mm Stroke: 365 mm Frame gap: 3680 mm Hfsdpfoyvqiuex Ahaoh Table width: 200 mm Throat depth: 410 mm Rapid traverse: 200 mm/s Working speed: 1 – 11 mm/s Return speed: 135 mm/s Connected load: 21.4 kVA Oil capacity: 350 l Dimensions (approx.): L 4.70 x W 2.40 x H 2.98 m Weight: 18 t Features • DA 2D graphic control • Hydraulic upper and lower tool clamping • Hydraulic WILA tool system • CNC-controlled crowning • Controlled axes: X, R, Y1, Y2 • 4 movable backgauge fingers, pneumatically clamped • Upper tool: 60°/R4, H 195mm, L = 3,850mm, segmented • Lower tool: V16/30°, R 1.6, H 100mm, L = 3,550mm, segmented • Lower tool: V40/80°, R 5, H 100mm, L = 3,100mm, segmented All information without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2001, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tools and products library * Graphical 2D programming * automatic bending sequence calculation and collision detection * EMERGENCY stop button at the front - CNC axis adjustment: * Y1 - Y2 - X - R axis CNC crowning * Manual adjustment of the 2x stop fingers, from the front (Z axes) - CNC electro-motorized table crowning - CNC electro-pneumatic die displacement (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable Hedpfx Ahsyn R Hvoajfh - 1x freely movable 2-hand/foot control - 1x free-moving foot switch - Lateral safety device (hinged doors) - rear safety device (sliding doors) - original operating instructions ( french )

Condition: excellent (used), functionality: fully functional, controller manufacturer: Delem, bending force (max.): 170 t, control type: CNC control, number of axes: 4, type of crowning: CNC-controlled, Equipment: CE marking, foot remote control, lower tooling, safety light barrier, upper tooling, Used Trumpf Trumabend V170 CNC Hydraulic Press Brake For Sale Hfjdpjx R Ul Aefx Ahaeh Subcategory: Press Brakes Tonnage: 170Ton Manufacturer: Trumpf Model: V170 Trumabend Condition: Used Trumabend DA65 2D CNC Controls 4 Axis machine, complete with i axis 2 Axis CNC Back Gauges R and X Axis complete with 4 fingers on the back stop CNC Ram Control Y1, Y2 CNC Bed Crowning Die Shift (iaxis) Pedestal Controls Electric Foot Switch Safety Light Guards

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, stroke length: 215 mm, throat depth: 410 mm, bending force (max.): 85 t, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Hodpfoyhmdqsx Ahaefh Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions: 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Wila tool clamping Adjustable die position Crowning system Tool cabinet

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, stroke length: 215 mm, controller manufacturer: Delem, working width: 1,280 mm, bending force (max.): 50 t, control type: CNC control, number of axes: 4, Equipment: CE marking, foot remote control, Used Trumpf Trumabend V 50 Hydraulic cnc 50ton x 1.2metre Press Brake For Sale Brand: Trumpf Type/Model: Trumabend V50 Hfjdpfsx Nip Hjx Ahaoh Year:2000 Trumabend V 50 Technical details Capacity: 50ton x 1.2metre: Full bed length: 1280 mm CNC Brand: Delem Total axis: 4 Y1, Y2, X and R Axis

Condition: good (used), Year of construction: 2005, functionality: fully functional, Used 2-meter CNC press brake from Trumpf Hfjdpfx Aex I N Awshajh Model: V85 Capacity: 2050 x 85 tons Delem CNC control CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Year of manufacture: 2005 Without tools

Condition: used, Year of construction: 1996, pressure 130 t Hfedpfx Aexabqbehash chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 215 mm dayligth 385 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10 mm Number of working hours 53.820 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 16.0 KVA weight of the machine ca. 11250 kg range L-W-H 3640 x 2210 x 2375 mm - in checked condition - machine video - ?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * tool & program library * including new TFT-LCD industrial monitor - CNC controlled axes: Y1 + Y2 / X / R - CNC electro-motor / controlled back stop (X axis) - CNC electro-motor / controlled height adjustment (R axis) - manual adjustment of the 2x stop fingers, from the front (Z axes) - manual adjustment of the die displacement, from the front (I axis) - WILA manual table crowning, including analog value display - TRUMPF hydraulic upper tool clamp - TRUMPF manual lower tool clamp - 1x freely movable 2 hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + CE declaration + circuit diagram

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm Hsdsxcp Rbspfx Ahajfh - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 885669, functionality: fully functional, stroke length: 365 mm, throat depth: 410 mm, clearance between the columns: 2,800 mm, working width: 3,050 mm, bending force (max.): 130 t, TECHNICAL DETAILS Pressing force: 130.0 t Working area Working width: max. 3,050 mm Max. stroke: 365 mm Throat depth: 410 mm Distance between columns: 2,800 mm Number of axes: 6 Control Control: CNC Control type: Delem DA65 Controlled axes: Y1-Y2 + X-R-Z1-Z2 + I + crowning Hfjdow Dqckepfx Ahaeh MACHINE DETAILS Dimensions and Weight Overall length: 3,500 mm Overall width: 2,200 mm Overall height: 2,400 mm Weight: 11,000 kg EQUIPMENT WILA hydraulic clamping Angle measurement system Documentation CE marking

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM Hjdpfx Asu T Nknohajfh - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: good (used), Year of construction: 1999, machine/vehicle number: 883345, Offer 25513 Technical Data: - Max. working length: 2050 mm - Distance between uprights: 1750 mm - Max. pressing force: 850 kN - Distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 365 mm - Stroke speeds: - Rapid downstroke speed: 200 mm/sec - Return speed: 135 mm/sec - Pressing downstroke speed: 1 - 11 mm/sec Hfsdpfx Aox Exzkshajh - Total drive power: 13 kVA - Space requirement approx.: W 2700 x H 2900 x D 2100 mm - Weight approx.: 9100 kg Equipped with: - 5-axis CNC control DELEM, DA - Y1 + 2; X; R; Z - Two-hand control panel with foot switch - CNC-controlled crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic tool clamping - Pneumatically assisted die table displacement

Condition: good (used), Year of construction: 1997, machine/vehicle number: 885258, Offer 25514 Technical Data: - Max. working length: 3060 mm - Frame opening: 2690 mm - Max. pressing force: 1300 kN - Max. distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds: - Downward idle speed: max. 200 mm/sec - Upward speed: 135 mm/sec - Pressing speed (downward): 1 to 11 mm/sec - Total drive power: 18 kW - Pneumatic connection: 6 bar - Required space: approx. W 3800 x H 2700 x D 2400 mm - Weight: approx. 11,500 kg Hfjdpfx Asx Ew Dqshaoh Features: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal - Crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Pneumatically assisted die table shifting

Condition: good (used), Year of construction: 2000, machine/vehicle number: 883454, Offer 25515 Hfsdpfxsx E Rfbe Ahash Technical data: - Max. working width: 1040 mm - Max. material thickness (at 40 kg strength): 3.5 mm - Table width: 300 mm - Throat depth: 100 mm - Working height: 880 mm - Front angle stop - 3 additional front support arms - Rear stop manually adjustable: 5 – 550 mm - Drive: 400 V / 5.5 kW - Electric foot switch - Required space including rear stop, without front support arms: approx. W 1500 x H 1250 x D 1400 mm - Weight: approx. 1400 kg

Condition: used, Year of construction: 1992, pressure 125 t chamfer lenght 3000 mm distance between columns . mm Control CNC type DA 65 R Hfodpsyqvc Iofx Ahajh stroke 200 mm safety distance 136 mm rapid traverse - down 100 mm/sec rapid traverse - up 92 mm/sec working feed 1-10 mm/sec weight of the machine ca. 13 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1997, Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available. Hsdpfjtqfqiex Ahajfh

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Hfedew Tcncopfx Ahajh Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2000, functionality: fully functional, operating hours: 22,325 h, stroke length: 365 mm, operating speed: 10 mm/s, reverse speed: 125 mm/s, throat depth: 400 mm, oil tank capacity: 500 l, total length: 4,600 mm, total width: 2,400 mm, total height: 3,100 mm, overall weight: 24,500 kg, travel distance X-axis: 600 mm, controller manufacturer: DELEM DA 65, working width: 4,080 mm, bending force (max.): 320 t, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 250 mm, distance between stands: 3,680 mm, installation height: 535 mm, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: CNC-controlled, Equipment: documentation/manual, • Pneumatic die shifting • 2 movable support arms • Hydraulic tool clamping at top and bottom Hfjdpfsyarkaex Ahaoh • CNC-controlled crowning

Year of construction: 1996, condition: excellent (used), Used very clean, well maintained Trumpf V series hydraulic down stroke cnc pressbrake for sale Trumpf v85 2metre x 85ton – 4axis cnc pressbrake in good condition – video at the bottom of the listing Make: Trumpf Model: Trumabend v85 Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 79ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Complete with: • Daylight: 390mm daylight • 2 axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling Hodei Igi Sopfx Ahajfh • Fully serviced / Good condition

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Used very clean, well maintained Trumpf V 85S series hydraulic down stroke cnc pressbrake with a large amount of tooling for sale Trumpf v85s 2.5 metre x 85ton – 4axis cnc pressbrake in good condition Make: Trumpf Hfedpfer Hcl Asx Ahaeh Model: Trumabend v85s Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 86ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Large amount of upper and lower Trumpf tooling, some tooling is brand new Complete with: • 2 axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: ready for operation (used), Year of construction: 1995, machine/vehicle number: 885802, functionality: fully functional, operating hours: 29,650 h, stroke length: 215 mm, oil tank capacity: 150 l, total length: 3,640 mm, total width: 2,210 mm, total height: 2,375 mm, overall weight: 13,000 kg, travel distance X-axis: 600 mm, controller manufacturer: Delem, controller model: DA23e, working width: 3,005 mm, bending force (max.): 130 t, back gauge speed R-axis: 300 mm/s, back gauge travel distance R-axis: 250 mm, installation height: 385 mm, control type: CNC control, back gauge adjustment: CNC-controlled, Equipment: documentation/manual, Trumpf CNC-controlled press brake, used. Type TrumaBend V 130 X, year of manufacture 1995. With hydraulic clamping but without tools. The machine is powered and can be demonstrated. Sale from current location. Hfedpfow Ud D Ujx Ahajh