Used Tube Deburring Machine for sale (65,445)

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Djdpjt Dk Ukjfx Ak Aekw Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 1994, Tracto-Technic tube bending machine Model Tubobend Capacity : 42 mm. Year : 1994 Djdpfx Ae Afhr Hjk Aokw Bending tools : 42 – 38 – 30 – 25 mm. including mandrels

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Dodpfx Aepu R Nvsk Askw Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: used, Year of construction: 2008, functionality: unexamined, Equipment: documentation/manual, ECM deburring machine including a double-chamber filter press and separate cooler. Available on short notice without warranty. Collection and transport must be arranged independently. Dkjdpfjy U Dyqex Ak Ajw

Condition: used, functionality: fully functional, Year of construction: 2016, Combined profile and tube bending machine Manufacturer: Italy For round tubes up to 48 mm 1st station for ring bending for large radii 2nd station for tube bending up to max. 180 degrees Electrically driven Motor: 1.1 kW, 400 V, 50 Hz, 3-phase With digital display Dksdpfjy Ryfnsx Ak Asw With foot pedal With tooling for 42.4 mm tube, radius approx. 150 mm Weight approx. 350 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, Equipment: documentation/manual, Lissmac mild steel processing line SBM-M D 1500:Two-side slag removal of plasma and thermal cut sheets up to 120 mm material thickness SBM-XL 1500:Deburring and edge rounding of parts up to 120 mm material thickness Processing both sides of the parts simultaneously Slag removing, deburring and edge rounding by single pass Max. working width: 1500 mm Conveyors 2 x 3000mm and 3 x 4200mm Max load 750 kg/m² Dust suction device ESTA DDE 8500, 7,5kW Including spare parts, consumables Full line has less than 2000 working hours Very good condition Available for inspection Dkodpfx Aezwlnrek Ajw

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. Dkedpfjyvhl Hex Ak Ajw We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00

Condition: used, Year of construction: 2002, overall weight: 8,000 kg, total length: 6,700 mm, total width: 2,400 mm, total height: 1,900 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Based on the following description, here is the machine description in Hungarian: We offer a used Schwarze-Robitec CNC 80/60 E TB MR tube bending machine, manufactured in 2002. Serial number: 2002-0410 Type: CNC 80/60 E TB MR Year of manufacture: 2002 Dkedpe Aarrysfx Ak Aew Tool sets: 40x 2R 60, 90, 120, 150. 38x 2 R 107.5 If you have any questions or require further information, please send us a message or call us.

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional bending mandrels, but without bending shoes: Ø 28, 2 x 38 + 42 mm Dodpfxswnrt Ss Ak Aekw Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Condition: good (used), functionality: fully functional, Timesavers 42 Series – 1350-WRB The 42 series features 2 stations: a belt sanding station, which is ideally suited for removing burrs and raised edges, and a second station with rotary brushes for uniform edge rounding. Thanks to the vacuum conveyor belt, even small parts, such as business card-sized items, can be processed without any problems. Throughfeed width: 1350 mm Table opening: 0.8-100 mm Conveyor belt: frequency-controlled and infinitely adjustable in speed Rotary brushes: frequency-controlled and infinitely adjustable in height and speed Dkedpfxoznm R Ne Ak Aew

Condition: good (used), Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: Dksdpfx As Ahi Trok Asw - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Closing Machine High-quality semi-automatic tube filling and closing machine from AXOMATIC, Italy, currently configured for aluminum tubes. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Currently configured for aluminum tubes - Rotary indexing table with 7 tube stations/holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling components Dkodpfx Akjzyu R Ue Ajw - Two stainless steel product hoppers/vessels - One product hopper with water-heated jacket - One product hopper without heating - Automatic/continuous dosing modes - Automatic tube discharge - Stainless steel construction - Transparent safety guarding - Emergency stop and safety controls ACCESSORIES & SPARE PARTS Extensive package of machine-specific format, dosing, and spare parts included, such as: - Components for the volumetric dosing/filling system - Filling and format/change parts - Stainless steel and plastic machine components - Seals and O-rings - Bearing and mechanical spare parts - Additional replacement and wear parts The available accessories are shown in the photographs. The exact scope will be documented before delivery. TECHNICAL DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Air consumption: approx. 150 l/min Max. water pressure: 3 bar Water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION In its current configuration, the machine is equipped for filling and closing aluminum tubes. Conversion for plastic tubes is technically possible but requires a dedicated hot-air sealing system and corresponding components. This equipment is not included with the machine. Further information regarding a possible conversion is available upon request. SPARE PARTS & DOCUMENTATION We have received confirmation through the manufacturer's service network that spare parts for this machine are still available. Original machine-specific documentation is not available. However, technical documentation for a very similar, nearly identical AXOMATIC machine can be provided as a technical reference. CONDITION Used machine in very good condition. The machine has been set up and function-tested by CYCRON. The tested mechanical and electrical functions operated properly. A production test with actual product and aluminum tubes has not been carried out. Therefore, the filling process under production conditions has not been verified. Machine video available upon request. Inspection and demonstration possible by appointment. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components. Further technical information, photographs, and available reference documentation can be provided upon request.

Condition: good (used), Year of construction: 1995, Buigmachine voor buizen van MARK / Ridgid Dkedpfx Akszulzge Aew Type: 2H B Zonder gereedschap

Condition: used, functionality: fully functional, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 42 mm, pipe length (max.): 2,000 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 220 bar, Equipment: documentation/manual, emergency stop, Sommer pipe bending machine for sale Dkjdps Aazvnjfx Ak Asw We are selling a Sommer pipe bending machine. The machine is fully functional and can be tested on-site with power, subject to prior arrangement. The original hydraulic unit has been replaced with an external hydraulic unit. If you are interested or have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 1,100 kg, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Dksdozp E Sbepfx Ak Aew Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 265040200001, Technical specifications available upon request. Dkjdpfezd Hhmsx Ak Ajw

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum Dsdpfowftuxjx Ak Ajkw value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Weight: 4,720 kg Djdpfx Ajzzkvpjk Askw CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Condition: good (used), functionality: fully functional, Machine type: Tube laser cutting machine Manufacturer: Trumpf Model: TruLaser Tube 5000 Year of manufacture: 2008 Dimensions: approx. 16 m x 8.2 m x 2.8 m Weight: approx. 17,000 kg Condition: ready for operation (used) Operating hours: 95,473 / 32,866 h (laser on / beam on; as of June 24, 2026) Main drive: 62 kW Laser power (max.): 2000 W Sheet thickness steel (max.): 8 mm Sheet thickness stainless steel (max.): 4 mm Sheet thickness aluminum (max.): 2 mm Travel range X-axis: 6,500 mm Travel range Y-axis: 200 mm Travel range Z-axis: 150 mm Tube diameter (round): 15 mm - 152 mm Tube diameter (square): 20 x 20 mm - 120 x 120 mm Tube diameter (rectangular): 20 x 20 mm - enveloping circle diameter x 150 mm Working length (automatic loading): 3,000 - 6,500 mm Working length (manual loading): Max. 7,500 mm Minimum remaining tube length: 141 mm Control: SIEMENS Sinumerik 840D Maintenance: Annual service by Trumpf HF driver stage renewed (09/2025) Push feeder renewed (07/2023) Equipment: LoadMaster Tube 6.5 m Layout plan (German) Operating manual (German) Stable machine frame with integrated laser unit Rotating and feeding station with self-centering clamping jaws Tube support, raw material with automatically retractable tube supports Push feeder with self-centering parallel clamping rollers High-precision drives Unloading station PRS 3001 with brush table, finished part length up to 3,000 mm Tube support, finished material with extendable guide rollers Closed beam guidance NitroLine (nitrogen is used as cutting gas) SprintLine (optimization of processing speed) Laser power control Programmable cutting gas pressure Automatic shut-off Work area lighting CO2 laser TruFlow 2000 High-frequency excitation Maintenance-free turbo radial fan Laser control TASC 3 Logbook function Laser cooling unit Laser cutting head with 5" lens Cutting head quick-change device ControlLine (collision protection) RJ45 network connection and floppy disk drive CE marking Multi-beam light barriers Monitoring system for gas pressure, temperature and coolant Extraction system, Handte Micropore filter type MF-L Protective cabin with Makrolon panes Nozzles 0.8, 1.0, 1.4, 1.7, 2.3 Clamping jaw sets D 20-85 mm and D 85-150 mm V-shaped molds and guide rollers for round tubes Dsdjzrt Uiopfx Ak Aekw Additional set for U-shaped molds and guide rollers up to enveloping circle diameter 90 mm instead of the standard 120 mm Scrap conveyor with container Loading unit for laser cutting machine Loadmaster Tube 5000 Year of manufacture 2008 Dimensions approx. 2.0 m x 1.95 m x 9.5 m Weight approx. 5,500 kg Ready for operation (used) 3,000 - max. 7,500 mm SIEMENS Simatic Annual service by Kaste

Condition: good (used), Year of construction: 2021, functionality: fully functional, Workpiece width – max. 780 mm Workpiece height – max. 120 mm Workpiece dimensions – min. 20x20 mm Total power requirement 6 kW Djdpj Agrgvjfx Ak Ajkw Machine weight approx. 445 kg Space requirement approx. 1500x1100x1550 mm

Year of construction: 2017, condition: used, functionality: limited functionality, machine/vehicle number: 2017038, Technical characteristics: ⚙️ Core Specifications Attribute Value Technology: High-pressure water-jet deburring Max Pressure: Up to 1000 bar Materials Processed: Cast iron, aluminum, steel Machine Type: Rotary table or tunnel with step feed Automation: Robotic arm with programmable sequence: Staubli TX60 newly retrofitted!!! Nozzle Material: Long-life alloy Construction: AISI 304 stainless steel Workpiece Handling: Mechanical clamping on custom pallets Water Treatment: Integrated deoiling and filtration system 🧰 Features & Capabilities Deburring & Flushing: Removes loose burrs and embedded swarf, even in intersecting holes. Flexible Programming: Supports various part geometries and production volumes. Robotic Integration: Nozzles mounted on anthropomorphic robots for precision targeting. Modular Design: Configurable for different layouts and productivity goals. Dkedpfx Ajxx Nq Tsk Ajw Eco-Friendly Operation: Water-based cleaning with extended bath life via filtration. Loading/unloading manual table: with the option of 2 work stations running in parallel, equipped with Poka Yoke devices. Machine status: WORKING – High pressure pump needs to be retrofitted to achieve 1000 Bar (currently 350 bar).

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, ACME Tube and Profile Laser System – Precision Meets Performance The ACME tube and profile laser system represents maximum efficiency and flexibility for modern tube and profile machining. Equipped with four high-precision chucks, vertically positioned guides, and three movable clamping systems, it ensures stable and precise processing of a variety of workpieces. The system is available with multiple machining diameters (Ø 280 mm, 360 mm, 550 mm, 640 mm, and 800 mm), providing maximum adaptability to diverse production requirements. With selectable laser powers of 3 kW, 6 kW, 12 kW, and up to 20 kW as well as a processing length of up to 12 meters, this machine meets the highest industrial demands. High-quality components from renowned manufacturers guarantee durability and process reliability. Of course, the system is CE-compliant and meets all common safety standards. Efficient production workflows are ensured by semi-automatic loading and unloading, complemented by an integrated small parts conveyor belt. The innovative 45° laser head also enables precise cuts even for complex geometries. Dkedey Ix E Ispfx Ak Aew ACME – Your solution for high-performance tube and profile laser processing at the highest level.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,000 h, control type: CNC control, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 2,000 h, laser power: 2,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 230 mm, pipe length (max.): 6,050 mm, working length: 6,500 mm, input voltage: 380 V, input current: 63 A, type of cooling: water, total length: 11,600 mm, total width: 3,000 mm, total height: 2,600 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, For sale is a used Bodor T230 tube laser. Tube length 6000mm, diameter 230mm, unloading length 2000mm. The machine is in good condition and can be inspected. The system has been reliably serviced and maintained by our trained personnel. Operating manual, CE certificate, extraction system, etc. are included. Inspection in Mönchengladbach. Dsdpfx Akoypawye Askw

Condition: good (used), Year of construction: 2005, Technical data: Min. bending capacity steel: ø 19.8 x 3.0 mm Max. bending capacity steel: ø 76.1 x 3.0 mm Max. bending capacity stainless steel: 76.1 x 1.65 mm Bending radius: max. 150 mm Bending angle: max. 190° Bending direction: clockwise (right) Max. tube length: 6000 mm Adjustable control panel CE marking Dimensions (length x width x height): approx. 7200 x 2000 x 1650 mm Weight: approx. 3 tons Accessories: Tools Dksdpfj Ahr T Rsx Ak Ajw D 20 R 40 D 30 R 75 D 25 R 50 D 16 R 40 Condition: Very good condition, little used The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source model: Max Photonics, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Maximum performance for modern tube and profile processing The ACME tube and profile laser system was developed for the highest demands in industrial manufacturing and combines precision, productivity, and flexibility at the highest level. Thanks to its powerful design and intelligent automation, it is ideally suited for steel construction, mechanical engineering, plant engineering, metal processing, and demanding job-shop operations. The innovative machine concept with four high-precision chucks, three movable clamping systems, and vertically arranged guides ensures exceptionally stable workpiece guidance. This allows even long, heavy, or complex tube and profile geometries to be processed with the highest accuracy. The system is available in various versions for tube diameters of Ø 280 mm, Ø 360 mm, Ø 550 mm, Ø 640 mm, and Ø 800 mm and can be optimally adapted to individual production requirements. With available laser powers from 3 kW to 20 kW and processing lengths of up to 12 meters, the ACME tube laser system offers maximum performance reserves for a wide range of applications – from thin-walled profiles to heavy structural tubes. Your advantages at a glance ✔ Four high-precision chucks for maximum processing accuracy Dedszb Irpepfx Ak Aokw ✔ Three movable clamping systems for optimal workpiece guidance ✔ Vertical guide structure for maximum stability and dynamics ✔ Tube diameters up to Ø 800 mm available ✔ Processing lengths up to 12,000 mm ✔ Laser powers of 3 kW, 6 kW, 12 kW and up to 20 kW ✔ Innovative 45° laser head for weld preparation and complex contours ✔ Semi-automatic loading and unloading for efficient production processes ✔ Integrated small parts conveyor for automatic parts removal ✔ High process reliability thanks to high-quality brand-name components ✔ Full CE compliance according to European safety standards ✔ German-speaking service and professional online support Technical highlights Powerful tube processing Tube diameter: Ø 280 mm to Ø 800 mm Processing length: up to 12,000 mm Four-chuck technology Remainder optimization through intelligent clamping technology High dynamics with maximum positioning accuracy Advanced cutting technology Laser powers from 3 kW to 20 kW Precise contour and miter cuts 45° laser head for weld preparation Optimal cut quality for a wide range of materials Automation for maximum productivity Semi-automatic loading and unloading system Automatic small parts disposal via conveyor Reduced downtime Higher output with less personnel Typical application areas Steel and hall construction Mechanical and plant engineering Metal and tube processing Vehicle and commercial vehicle construction Agricultural technology Facade and railing construction Furniture and profile manufacturing Job-shop operations Quality and safety The ACME tube and profile laser system meets all relevant European safety requirements and is delivered CE-compliant. High-quality components from leading manufacturers ensure a long service life, high availability, and maximum investment security. ACME tube and profile laser system More performance. More precision. More possibilities. The intelligent solution for economical and highly productive tube and profile processing in modern manufacturing.