Used Turbine for sale (339)

Condition: good (used), Hook type shotblasting machine 250 kg TURBOTECNICA DELTA GR 7-10 Type: Hook type Max. diameter of workpiece: 750 mm Max. height of workpiece: 1000 mm Max. workpiece weight: 250 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 260 Turbine wheel diameter: 260 mm Power of turbine: 5,5 kW Max. turbine flow: 74 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 2.000 m3/h Total weight of machine: 0 kg Total width of machine: mm Pgjdpfx Abowm Ar Nezen Total height of machine: mm Total length of machine: mm Machine is ready for operation

Condition: good (used), Year of construction: 2008, Hook type shotblasting machine 500 kg Pgjdpfx Ajylhhrobzsn COGEIM PG 10x15 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm !!! With ATEX Filter unit !!! Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

Condition: used, operating hours: 60,000 h, functionality: fully functional, fuel type: gas, output frequency: 50 Hz, Availability of used gensets of 1.0 and 1.2 MW. Psdst Dipmspfx Abzegn Good conditions, Major overhaul to be done. Turbines included if requested and available Possibility of purchasing single units or multiples (subject to availability).

Condition: new, Year of construction: 2026, functionality: fully functional, fuel type: electric, drive type: Elektro, Industrial vacuum cleaner Condition: New appliance Technical condition: New Podpfswiknkex Abzsgn Description: New appliance with socket for machine use, on/off function. Double turbine for outstanding suction power. Sweepings container for rolling for easy transportation for emptying. incl. workshop set - (is not included as standard!)

Condition: used, Year of construction: 2007, 2007 | DAF CF 84.460 RSP | Used Suction Excavator | 232536 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 51300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 42 inspection points 32 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the suction excavator. Quite significant tire wear. Presence of oxidation on the bucket and turbine. All functionalities are working. Ability to cut off the air valve on the rear left of the vehicle. Damage to the rack dampening the access door on the right side. Absence of the GNR tank cap. Presence of two remote controls. Absence of the AD Blue tank cap. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40180 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Pgedpfsyi Enwjx Abzsn ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2000, condition: used, OMSG brand ROTOFLOW 170-N drum shot blasting machine with automatic feed tower, year 2000 Used drum shot blasting machine Continuous belt shot blasting machine for shot blasting of aluminum, brass or steel forgings, screws and bolts. Automatic feed tower. Inverter turbines Special valves with two positions Filter. Pgedpfxot Ag Udo Abzon

Year of construction: 2000, condition: good (used), used drum shot blast machine Brand: OMSG Type: ROTOFLOW Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Pgedpfx Asmza S Ejbzen Special two position valves Filter CURRENT STATUS: Disassembled and stored in our facilities.

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. Pgodpeyhc Irsfx Abzon - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Year of construction: 2014, condition: excellent (used), The Ultimate Solution for High-Performance Industrial Manufacturing Are you seeking a machine that delivers both formidable power and pinpoint precision? The PME 1500x1000 is meticulously engineered to the strictest industrial benchmarks, offering an impressive 78.6 kW of installed power for uninterrupted, high-efficiency production. Why Choose the PME 1500x1000? Quad-Turbine Performance: Outfitted with four 11 kW heavy-duty motors, this equipment is designed for rigorous workloads and reliable output. Substantial Electrical Capacity: Built for a robust 160 A supply, the PME 1500x1000 effortlessly handles intensive operations without compromise. Precision Pneumatics: Operating at a minimum of 6 bar, with an integrated air quality management system, this model ensures smooth and dependable performance with every cycle. Engineered for Longevity: Featuring a 1 1/2" supply line design and ISO-compliant air filtration, each component is optimized for continuous uptime and low maintenance demands. Podpfx Aoy Eilyobzjgn Technical Highlights: - Total Installed Power: 78.6 kW - Network Compatibility: 5-wire, power factor 0.9 - Clean Operation: ISO/DIS 8573-1, Class 4 air quality - Efficiency: Air consumption 16–36 m³/hour ADVANCE YOUR PRODUCTION CAPABILITY The PME 1500x1000 is more than just a machine—it's a strategic investment in your business’s growth. Benefit from the hallmark of Finnish engineering blended with high-speed, industrial-grade performance. Contact us now for a comprehensive demonstration and competitive quote!

Condition: excellent (used), mileage: 204,000 km, power: 324 kW (440.52 HP), first registration: 03/2009, fuel type: diesel, axle configuration: 6x6, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro4, suspension: steel, number of seats: 2, total length: 9,600 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Leaf suspension - Power brake booster - Refrigerator - Radio/CD player - Rotating beacon - Reversing camera - Hose sets - Sun visor - Toolbox - Central lubrication - Towing hitch = Remarks = 6x6 Leaf suspension ZF 16-speed manual transmission RSP ESE 26/8-DV-K suction excavator 8 m³ 2 turbines 2x radio remote control Hydrostatic drive (suction + driving + steering) Inspection valid until 05.03.2027 In very good condition! Dutch vehicle Pgodpfx Ajy Dh Rfsbzen Immediately operational = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Transmission Transmission: ZF, 16-speed, manual Axle configuration Suspension: leaf suspension Max. front axle load: 9,000 kg Rear axle 1: Max. axle load: 9,500 kg Rear axle 2: Max. axle load: 9,500 kg Weights Unladen weight: 23,520 kg Payload: 4,480 kg Gross vehicle weight: 28,000 kg Functional Body make: RSP ESE 26/8-DV-K Maintenance, History and Condition APK (MOT/TUV): inspected until 03/2027 Technical condition: very good Visual condition: very good Identification License plate: BV-VF-88

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, fuel type: electric, fuel: electricity, Equipment: second-hand vehicle warranty, IPC GANSOW 1250E SWEEPERS NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2014 production year New cylindrical brush combined with new side brushes provide excellent sweeping effect Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1250 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7800 Sweeping speed (km/h): 6 Tank capacity (l): 85 Filter surface (m²): 3.3 Dimensions L x W x H (mm) 1615 mm x 905 mm x 1210 mm Weight of the machine ready to work (kg) ~ 350 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A Pedjvunxfepfx Abzegn NEW, MAIN AIR FILTER New roller brush New side brushes New roller rubber guards 85l waste containers KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1250 E sweeper is a perfect machine for efficient, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 683 h, functionality: fully functional, working width: 850 mm, area performance: 5,000 m²/h, overall weight: 620 kg, warranty duration: 12 months, battery voltage: 120 V, gradeability: 11 %, NUMATIC TTV 678G/400T SCRUBBER NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) 2017 production year 850mm cleaning head equipped with three new medium-hardness disc brushes, allowing work on any surface. New squeegee and new polyurethane compression rubbers, resistant to contact with oil liquids, greases and petroleum derivatives. Built-in battery charger makes everyday use easier New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new durable drain hose and a new suction hose The new suction turbine ensures high water suction power from the squeegee Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 24 V Working width of brushes (mm): 850 Suction width (mm): 1100 Pgsdpjwprt Isfx Abzjn Theoretical efficiency (m²/h): 5000 Tank capacity clean/dirty water (l): 120/120 Number of brushes (pcs): 3 Brush speed (1/min): 220 Weight without batteries (kg): 315 Total weight, ready to work (kg): 620 Gradeability (%): 11 DIMENSIONS: Length with squeegee (mm) 1676 Height (mm) 1425 Width with squeegee (mm) 1100 Width without squeegee (mm) 1054 INCLUDED: NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) NEW SQUEEGEE WITH NEW, OIL-RESISTANT RUBBERS NEW 24V 700W suction turbine NEW 300mm PPL 0.6 disc brushes (x3) NEW drain hose NEW suction hose NEW head protection rubbers (x2) Built-in battery charger Tenzi Normal 5L fluid - FREE KEY FEATURES: A 120-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (850mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 461 h, functionality: fully functional, working width: 850 mm, area performance: 5,000 m²/h, overall weight: 606 kg, warranty duration: 12 months, water tank capacity: 120 l, gradeability: 11 %, NUMATIC TTV 678G/400T SCRUBBER NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) 2017 year of manufacture and 461 hours of operation 850mm cleaning head equipped with three new medium-hardness disc brushes, allowing work on any surface. New squeegee and new polyurethane compression rubbers, resistant to contact with oil liquids, grease and petroleum derivatives. Built-in battery charger makes everyday use easier New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new, durable suction hose The new suction turbine ensures high water suction power from the squeegee Pgjdpfx Aswpr Huebzen Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 24 V Working width of brushes (mm): 850 Suction width (mm): 1100 Theoretical capacity (m²/h): 5000 Tank capacity clean/dirty water (l): 120/120 Number of brushes (pcs): 3 Brush speed (1/min): 220 Weight without batteries (kg): 315 Total weight, ready for work (kg): 620 Gradeability (%): 11 DIMENSIONS: Length with squeegee (mm) 1676 Height (mm) 1425 Width with squeegee (mm) 1100 Width without squeegee (mm) 1054 INCLUDED: NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) NEW SQUEEGEE WITH NEW, OIL-RESISTANT RUBBERS NEW 24V 700W suction turbine NEW 300mm PPL 0.6 disc brushes (x3) NEW suction hose NEW head protective rubbers (x2) Built-in battery charger Tenzi Normal 5L fluid - FREE KEY FEATURES: A 120-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (850mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, working width: 350 mm, area performance: 1,540 m²/h, overall weight: 80 kg, warranty duration: 12 months, water tank capacity: 15 l, battery capacity: 25 Ah, GHIBLI WIRBEL FR 15 M 38 BC SCRUBBER NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) 2022 production year 380mm cleaning head (TB380) equipped with a new pad holder and a medium-hard pad, allowing work on any surface. Built-in battery charger facilitates daily use Polyurethane rubber bands, resistant to contact with oil liquids, greases and petroleum derivatives. New, efficient suction turbine ensures high water suction power from the squeegee The device is equipped with a new, durable suction hose Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Working width (mm): 380 Squeegee width (mm): 450 Efficiency (m²/h): 1,540 Number of brushes (pcs.): 1 Capacity of the clean water tank (l): 15 Capacity of the dirty water tank (l): 17 Weight without batteries (kg): 40 Weight of the machine ready for operation (kg): 80 Dimensions (L x W x H) (mm): 865 x 430 x 1,160 INCLUDED: NEW SONNENSCHEIN GF GEL BATTERIES 12 025V (2x) NEW suction turbine 24V 250W NEW pad holder with red pad NEW suction hose Pedpjwmc E Nofx Abzogn Suction bar with oil-resistant rubbers Tenzi Normal fluid 5 liters - FREE

Condition: reconditioned (used), Year of construction: 2021, operating hours: 1,681 h, functionality: fully functional, working width: 550 mm, area performance: 3,025 m²/h, overall weight: 380 kg, warranty duration: 12 months, water tank capacity: 75 l, TASKI SWINGO 2100 µicro SCRUBBER NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2021 with 1681 hours of operation 550mm cleaning head equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A built-in battery charger simplifies daily operation. Podpfx Aboymd S Njzegn The device is equipped with a new, durable drain hose and new suction hoses. The suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: Taski Swingo 2100 µicro Power supply voltage: 24 V Brush working width (mm): 550 Suction width (mm): 630 Theoretical capacity (m²/h): 3025 Clean/dirty water tank capacity (l): 75/75 Working speed (km/h): 5.5 Number of brushes (pcs): 2 Brush rotation speed (rpm): 190 Weight without batteries (kg): 185 Total weight, ready to use (kg): 380 DIMENSIONS: Length with squeegee (mm) 1380 Height (mm) 1280 Width with squeegee (mm) 630 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW 280mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 75-liter tank allows for a large amount of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the cleaned surface. The large working width (550 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 1,744 h, functionality: fully functional, working width: 850 mm, area performance: 6,375 m²/h, overall weight: 805 kg, warranty duration: 12 months, water tank capacity: 200 l, TASKI SWINGO 4000 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2019 Machine has 1,744 hours of operation. 850mm cleaning head equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and new suction hoses. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 850 Suction width (mm): 1100 Theoretical capacity (m²/h): 6375 Clean/dirty water tank capacity (l): 200/210 Working speed (km/h): 7.5 Number of brushes (pcs): 2 Weight without batteries (kg): 295 Total weight, ready to use (kg): 805 DIMENSIONS: Length with squeegee (mm) 1780 Height (mm) 1400 Width with squeegee (mm) 1100 Width without squeegee (mm) 890W INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 430mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hoses Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 200-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. Pgjdpfxjw A Il Tj Abzen The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (850 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included Pedpfxoy Avh Nj Abzogn System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Year of construction: 2025, condition: ready for operation (used), This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine. Additional equipment • Machine bed, slot nozzle head, mounts for wrapping tools • Complete tool set for PVC/Aluminum profiles • Operator safety system and control cabinet • Set of nozzles for profile cleaning • Protective foil unwinder and hot air turbines • Infrared screen with lamps and tool cassette Machine Benefits Qualitative Machine Benefits • Machine entry section with heavy-duty steel frame • Transport rollers with motor-driven frequency converter • Integrated control cabinet • Emergency safety systems • Glue unit safety mesh • Operator control panel for adhesive management • Two 15 mm wide rollers per shaft, 240 mm diameter • Quick positioning in 5 mm steps • Air blowers & ionization for static and dust removal Pgjdpfx Absyaa Utszjn • Automatic primer station with precise application Technical Machine Benefits • The profile wrapping machine is designed to wrap profiles of various shapes, sizes, and materials using different foils with hot melt adhesives. • Operates as a standalone unit or part of a complete production line. • Capable of working with materials such as pvc, aluminum, and some composites. • Various foil types are compatible, special configurations may be needed for certain materials. • Profile dimensions: width 25–300 mm, length ≥600 mm, height 4–120 mm • Foil dimensions: width 25–330 mm, outer roll diameter ≤600 mm, inner roll diameter 76 mm • Max mechanical speed: 60 m/min • Working height: 900 mm • Voltage: 400v – 50hz • Compressed air: 6 bar Extra Information Machine still under power. 6 self-regulating heaters, expandable to 8. Slot Nozzle Head (330 mm) for adhesive application. Roll diameter up to 600 mm. Magnetic powder brake for tension control. Infrared screen for foil heating. Foil applied with shaped rubber rollers. Quick profile shape change system. For foil rolls up to 600 mm diameter. Height-adjustable for pressure control. The system is versatile with components designed to enhance processing efficiency and adaptability for various production needs. Dimensions Machine Depth 6000 mm

Condition: new, functionality: fully functional, type of input current: three-phase, intake manifold diameter: 250 mm, total height: 2,720 mm, total length: 1,650 mm, total width: 750 mm, Sawdust extraction BOLMAR MC2 4,0 kW Specification: - condition - brand new - manufacturer - BOLMAR Pgedstq Eiwjpfx Abzjn - model - MC2 - turbine motor power - 4.0 kW - turbine inlet - fi 250 mm - filtering surface - 5.4 m2 - efficiency - 6 900 m3/h - noise emission - 89,5 dBa - diameter of the collecting bag - 2 x 600 mm - weight - 95 kg - overall dimensions - 165 x 75 x 272 cm ( l. x w. x h. ) Additional information: - machine brand new, never used - the pictures show the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) Pgodpfeywuczsx Abzen • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: new, Year of construction: 2026, The most powerful centrifugal fan FAN5500 reaches a capacity of up to 8000m3/h. The high vacuum created by the blade system at the right angle and the high motor power can cope with the toughest jobs.Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been created. The design of a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation drying systems dehumidifiers Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 8000 m3/h inlet diameter 300 mm discharge diameter 250 mm ENGINE SPEED 2850 rpm DIMENSIONS 670 x 600 x 600 mm MOTOR POWER / VOLTAGE 5.5 kW/400 V WEIGHT 55 kg Pgodjvughljpfx Abzsn

Condition: new, Year of construction: 2026, The most powerful centrifugal fan, the FAN5.5, achieves a capacity of up to 7419 m3/h. The design of the new technology line has enabled us to develop the LineWind metal turbine system. This is the most important feature of the radial fans, enabling them to extract all sorts of pollutants with increased vacuum power, thanks to a special blade system that has been profiled at an appropriate angle. The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of shavings, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 7419 m3/h inlet diameter 300 mm discharge diameter 250 mm PRESSURE 2014 - 1320 Pa DIMENSIONS 750x750x830 mm MOTOR POWER / VOLTAGE 5.5kW Pgsdpfxovugh Eo Abzsn WEIGHT 110kg

Condition: new, Year of construction: 2026, The centrifugal fan allows for operation with increased vacuum power to extract various types of pollutants, thanks to a special blade system which has been profiled at an appropriate angle. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Thanks to the many years of experience of our CORMAK team, radial fans of the FAN series were created. Designing a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation drying systems dehumidifiers Multi-vane metal rotor! Pgsdpovugg Usfx Abzjn High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 4000 m3/h inlet diameter 200 mm discharge diameter 180 mm ENGINE SPEED 2850 rpm DIMENSIONS 575 x 550 x 500 mm MOTOR POWER / VOLTAGE 2,2 kW / 400 V WEIGHT 35,5 kg

Condition: new, Year of construction: 2026, The fan, created on the basis of a radial impeller blade system, is designed for handling waste generated during wood processing. The high vacuum and high motor power ensure a constant underpressure. Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: - transport of shavings, sawdust, small granules - dusty air - local exhaust - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) anti-vibration, stabilising feet Pgjdpfxovuggbe Abzsn safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day CAPACITY MAX. 3000 m3/h INLET DIAMETER 150 mm OUTLET DIAMETER 150 mm ROTATIONS 2850 obr/min DIMENSIONS 575 x 510 x 500 mm MOTOR POWER/VOLTAGE 1,5 kW/400 V WEIGHT 32,5 kg

Condition: new, Year of construction: 2026, Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: - transport of shavings, sawdust, small granules - dusty air - local exhaust - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) anti-vibration, stabilising feet safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day Pgedpfevuqyrox Abzen CAPACITY MAX. 7500 m3/h INLET DIAMETER 250 mm OUTLET DIAMETER 250 mm ROTATIONS 2850 obr/min DIMENSIONS 670 x 600 x 600 mm MOTOR POWER/VOLTAGE 4,0 kW/400 V WEIGHT 53 kg