Used Wind Turbine Equipment for sale (113)

Condition: ready for operation (used), Year of construction: 2005, A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible. Fjdpfx Ajywlpxjkvegb

Condition: new, Year of construction: 2010, Make Voith Model: RWW11 E5 Windrive planetary gear Year of manufacturing: 2010, Unused Dimensions LxWxH (mm) 2400 x 1450 x 1700 Weight (kg) ca 6900 Total quantity in stock 3 Country of origin Germany Fodpfxjtub Dze Akvogb Comments Unused mindmill planetary gear, 3400 Kw power supply needed, n1: 476 rpm / n2: 1500 rpm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, total length: 700 mm, total width: 840 mm, total height: 940 mm, DGUV certified until: 06/2028, conveyor belt width: 750 mm, input frequency: 50 Hz, working width: 500 mm, type of input current: three-phase, Equipment: chassis, Baguette - long roller Model: UNIC with 3 rollers Capacity: min 50 - 1200 g max (depending on the type of dough) Unrolling width: up to max. 750 mm stainless steel design, Connection: 400V, 1.1 kW, 16A-CEE plug Fgjdpfx Akshwzkcjvsb Dimensions: 966 x 855 x 714 mm, WxDxH NEW machine with 24 months warranty Option: base infeed conveyor discharge tours Discharge belt with drive feed guides Visit our large bakery machine park!

Condition: good (used), Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from Gansow scrubber-dryer Fsdpfx Akodwdrgsvogb -Voltage: 24 V -Quantity: 29x available -Price: per piece -Dimensions: Ø 145/H175 mm -Weight: 2.3 kg/pc.

Condition: used, Storage location: Nattheim Fgsdpfxjvvi E No Akvsb

Condition: used, Storage location: Nattheim Fgedpovvi Haofx Akvsb

Condition: used, Used Siemens type CFR5 G6A single stage gas expansion turbine. System rated approximately 60,000 nm3/hr gas feed, 55 bar inlet pressure at 145 deg.c. Includes Loher type JKXK-560MR-04A generator rated output of 3035kw at 1509 RPM with connected power load of 2.8MW. Additional information available upon request. Fodpfxjy Aaycs Akvsgb

Condition: excellent (used), - Dimensions: 610x1150x1460 mm - Model: TRT 120 - Production per cycle: max. 20 litres + Mixing per cycle: 8 to 16 kg - Theoretical hourly production: 75 to 120 litres/hour - Operating ambient temperature: 16°C to 3°C - Air cooling - Pasto multifunction turbine Fsdowxu Ruepfx Akvjgb - Weight: 510 kg - Voltage: 380V

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2109, pressure: 12 bar, power: 814 kW (1,106.73 HP), temperature: 192 °C, Fire-tube steam boiler HKB SHP 1250, 1250 kg steam/hour, 12 bar certified pressure, 814 kW. The listed price is for the boiler in its current condition, but we can offer various additional services. Such as: New insulation, control cabinet, overhaul and pressure test, burner and devices, installation, etc. Fedpfx Aoyu Ikxekvogb

Condition: reconditioned (used), We offer a refurbished STANĚK MZ350 turbine. The turbine comes with a 7.5 kW motor. Refurbishment has been carried out using original parts. Blasting, shot blasting, throwing turbine. Fodpfx Aoy H Aklokvegb

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Fully automatic stretch wrapping machine Spinny S2300 with electromechanical top press Pallet dimensions: L 1200 x W 800 x H 2600 mm Maximum weight: 1000 kg Hourly rate: approx. 20 pallets/hour (depending on pallet height and wrapping pattern) Conveyor height: 500 mm Technical specifications: • Wrapping cycle programmable via electronic control panel and SIEMENS S7-1200, KTP700 operator panel • Control system: SIEMENS PLC S7-1200 SAFE and HMI KTP700 • 15 freely programmable wrapping programs • Turntable stop at end position • Conveyor height: 500 mm • Usable width of roller conveyor: 1000 mm • Photoelectric cell for automatic pallet height detection • Clamp for attaching film to the pallet load • Automatic film cutting system at the end of the wrapping cycle • Frequency inverter for adjusting turntable speed from 5 to 15 rpm • Frequency inverter for adjusting film carriage speed • Powerstretch 250% • Film welding with hot pad counter-blade • Standard colors: Grey RAL 7001 for fixed parts, Grey RAL 7016 for moving parts and plastic covers • Volt-free contacts • 1 frequency inverter for controlling conveyor at turntable POWER SUPPLY > Power supply: 400 V, 50 Hz, 3-phase + PE > Frequency: 50 Hz > Installed power: 3 kW > Auxiliary power supply: 24 V DC > Compressed air: 6 bar FILM AND ROLL CHARACTERISTICS > Thickness: 12 ÷ 23 µm > Recommended thickness: 20 µm > Core diameter: 76 mm > Height: 500 mm > Maximum roll weight: 16 kg > Maximum outer roll diameter: 250 mm Powered roller conveyor for outfeed, with double sprockets, frequency controlled Length: 1470 mm Usable width: 1000 mm Height: 500 mm Roller diameter: 89 mm Pitch: 158.75 mm 2 pcs. SICK M40 UE403 PSD01 1047810 Safety light curtains, safety category 4, safety fences, height: 2200 mm with access door, Fgsdpfx Akewxrh Devob dual-channel safety magnetic sensor integrated in safety control

Year of construction: 2020, condition: good (used), Winding roller, winding shaft, tensioning shaft, pneumatic expansion shaft, reel, reel rod, trapezoidal thread spindle, spindle, unwinding reel, unwinding reel, sheet metal unwinder -Manufacturer: Tidland, winding shaft -Type: G890E -Drive shaft: Ø 40 x 80 mm -Mounting: Bolt circle Ø 220 x 11 mm -Number: 8x winding shaft available Fgedpoyxmrdjfx Akvjb -Price: per piece -Dimensions: Ø 250 x 855 mm -Weight: 53 kg/unit

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4755, input voltage: 380 V, Winding machine suitable for the production of low-voltage transformers, coils, electromagnets, and various types of linear windings. Fodpfx Aksy Enk Iovegb

Condition: used, Year of construction: 1999, operating hours: 76,000 h, functionality: fully functional, machine/vehicle number: 516950, Basic data: • Manufacturer: BHS Cincinatti • Type: AD 63T • Serial number: 516950 • Year of manufacture: 1999 • Rated power: 11,700 kW • Gear ratio: 1500/7555 • Operating hours: 76,000 hours Last gearbox inspection was performed in 2007; bearing and gear inspection is recommended. Fedpsy Drd Asfx Akvogb

Year of construction: 2007, operating hours: 25,300 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 192-237, The LM 6000 gas turbine is a dual rotor aeroderivative turbine connected to a generator via a reduction gear. The nominal power output under ISA conditions is 45 MW. The gas turbine operated exclusively on natural gas. The turbine had run only 25,300 hours before it was sent for factory inspection and conversion at the GE facility. Turbine inspection and PD-PF conversion were completed in 2025. The gas turbine is equipped with the SPRINT system for higher power output at elevated ambient temperatures. Following the PF conversion, the turbine's emission values are compliant with GE standards. Fodpfx Aey Dq Duskvogb This set does not include the hydraulic starter, lube oil system, noise hood, air intake systems, or protection and control system!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, total width: 966 mm, total height: 714 mm, DGUV certified until: 04/2028, conveyor belt width: 750 mm, input frequency: 50 Hz, Equipment: chassis, Baguette - long roller Model: Forma with 3 rollers Capacity: min 50 - 1200 g max (depending on the type of dough) Unrolling width: up to max. 750 mm stainless steel design, Connection: 400V, 1.1 kW, 16A-CEE plug Dimensions: 966 x 855 x 714 mm, WxDxH NEW machine with 24 months warranty Option: base speed controller infeed conveyor discharge tours Discharge belt with drive feed guides Visit our large bakery machine park! Fedpfx Ajhwzkkokvegb

Condition: refurbished (used), functionality: fully functional, We offer 4 pieces of Schlick turbines – 320 mm, including 7.5 kW motors. Turbines: Schlick ROTO-JET RB500 5.2/4/7.5. Turbine type – 5.2. Abrasive delivery – 140 kg/min. Abrasive outlet speed – 70 m/sec. Turbines after complete overhaul, fitted with original spare parts. Shot blasting, blasting wheel, sandblasting machine. PRICE PER PIECE – 3000 EUR. Fgodpfx Akovphf Usvob

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale: complete production line for rotors and stators, including full assembly of the corresponding motors. Some of the brands/models: Promotech, Stihl, etc. Machines on the stator line include: stator core press, stator insulation insertion machine, dispensers for insulating plastic, stator winding machine, machine for cutting excess wire, tab welding machine, stator inspection station. Machines on the rotor line include: rotor core press, rotor insulation insertion machine, commutator press-fitting machine, rotor winding machine, rotor testing (rototest). Additionally: rotor varnishing machine, finishing operations (lathe for commutator and rotor core machining), balancing machine, cutting/sawing machine, rototest. Also includes: assembly line for complete motor assembly, DAKS device for motor testing, conveyor belt, packaging unit. Fgsdpsy Ddrrjfx Akveb For more pictures, detailed information, or any inquiries, we are at your disposal.

Condition: excellent (used), wire diameter - max. 5 mm Fgjdpfx Aksyr Si Hovsb total power requirement 7,5 kW

Condition: excellent (used), wire diameter - max. 2,5 mm Fsdpfx Akoyrtwlevogb

Condition: excellent (used), wire diameter - max. 2 mm Fgodjyrhmnjpfx Akvjb

Condition: excellent (used), Year of construction: 2012, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: J00674, power: 738 kW (1,003.40 HP), temperature: 59 °C, For sale: TURBODEN 10HR ORC System Plant details: Year of manufacture: 2012 Operating hours: approx. 25,000 h Net electrical output: 738 kW Thermal output (district heating): 4,549 kW District heating flow rate: 115 m³/h Inlet temperature: 59 °C Outlet temperature: 93 °C Fgjdevrfpiopfx Akvjb Additionally included equipment: Thermal oil tank Expansion tank Pumps Control cabinets Further components The plant was professionally decommissioned and preserved by Turboden, ensuring safe continued operation.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, We offer refurbished Rösler Hurricane H42 turbines - 11 kW. The stated price is per unit. Fodjyy Rybjpfx Akvogb

Condition: good (used), Year of construction: 2014, Technical Description The ROBOPAC COMPACTA 4 is a manually operated horizontal wrapping machine with a rotating ring designed for spiral wrapping of elongated products using stretch film (horizontal wrapping machine, stretch wrapper). The machine is equipped with a belt-driven, one-piece cast aluminum rotating ring mounted on heavy-duty rollers to ensure smooth and consistent rotation. The integrated tensioning and cutting system enables automated wrapping cycles, while the mechanical film carriage with dancer system guarantees optimal film pre-stretch. This machine is particularly well-suited for flexible use with a wide variety of workpieces. Technical Data Rated voltage: 230 V Frequency: 50/60 Hz Phases: 1Ph+N Installed power: 0.55 kW Max. ring speed: approx. 150 rpm Operating pressure: approx. 6 ±1 bar Compressed air consumption: approx. 1.8 NI/cycle Film width: 50–125 mm Max. reel diameter: 200 mm Fjdpfx Aksywn Nuevjgb Core diameter: 76 mm Min. workpiece size: approx. 50 × 50 mm Weight approx. 250–350 kg Dimensions approx. L × W × H = 1010 × 1234 × 1340 mm Intended Use For wrapping long goods such as wooden slats, profiles, aluminum parts, plastic profiles, or bundled goods in the packaging lines of the wood and plastics industries. Condition Used – tested and fully functional, signs of use as shown in the photos.

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, total width: 550 mm, total length: 380 mm, total height: 470 mm, overall weight: 25 kg, product width (max.): 250 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, year of last overhaul: 2026, Rondo Rondin Croissant Rolling Machine Fgodpfx Aox Ht Injkvob Suitable for all types of sticks and lye sticks, etc. Universal rolling/wrapping machine Simple technology Only from us: DGUV V3 tested Connection: 400V, 16A-CEE plug Dimensions approx.: 550 x 380 x 470 mm (W x D x H) Refurbished used machine, SAB certified with warranty & spare parts service Options: Delivery service Service package E-Box for enhanced safety Maintenance contract Training & commissioning Visit us!